tristel purogene for water treatment

Transcription

tristel purogene for water treatment
tristel purogene for
water treatment
Purogene:
Equivalent to 3.36% sodium chlorite solution (3.36g in 100g)
as active ingredient
Use product safely. Always read the label and product information prior to use.
TRI/BIO/030/Issue 3
25 litres
Once activated, irritating to eyes, skin and respiratory system
Contact with acids liberates toxic gas
Directions for use
This product must be used in accordance with
Tristel’s instructions for use. Safety precautions
must be taken in accordance with the Material
Safety Data Sheet. A COSHH assessment must
be performed prior to the use of this product.
Storage
Store in the original container in a cool, well
ventilated area away from acids, chlorine
compounds and strong reducing agents. Keep in
a secure location away from children. For use by
suitably trained personnel only.
Safety
When using this solution wear suitable protective
clothing and safety glasses or face shield. Do not
breathe fumes produced during activation. In
case of insufficient ventilation wear suitable
respiratory equipment when activating the
solution, spraying solutions and during use.
In case of contact with eyes and skin rinse
affected area with copious quantities of water. If
symptoms persist, or if feeling unwell as a result
of using the solution, seek medical advice. Avoid
release of the solution to the environment. For
more detailed information refer to the instructions
for use and the material safety data sheet.
Disposal
For disposal instructions refer to the safety data
sheet. Empty containers should be disposed of in
accordance with local waste regulations.
HARMFUL
Lot No:
Contents: 25 litres
Use by:
Tristel Solutions Limited, Lynx Business Park, Fordham Road, Snailwell,
Cambs CB8 7NY Tel: +44 (0)1638 721500
Lenntech bv, Rotterdamseweg 402m, 2629HH, Delft, the Netherlands
Tel. +31-15-261.09.00
Fax. +31-15-261.62.89
[email protected]
TRI/BIO/042/Issue 3