XSnap 10 Q Pyr A

XSnap 10 Q Pyr
Skin
B
Size
Skin
Size
38.5’
38.5”
x
38.5”
59
”
38.5”
W
H
59”
x
28”
H
A
A
W
H
”
28
D
Diamond
C
Skin
2X1 Horizontal Thread
D
Size
Skin
”
Skin
”
28
30
1x1 Horizontal Thread
1x1 Horizontal Thread Shown as it will appear
on the Xpressions unit
.5
57
”
H
Size
30”
x
28”
28
W
1x1 Flat Back Shown
as it will appear on the
Xpressions unit
1x1 Flat Back
G
28”
x
28”
W
1x1 Vertical Thread
W
H
Size
28”
x
30”
W
H
1x1 Vertical Thread Shown as it will appear
on the Xpressions unit
H
Skin
”
28
”
Skin
”
28
F
Size
30
”
Skin
57.5”
x
57.5”
2x2 Flat Shown as
it will appear on the
Xpressions unit
2x2 Flat
28
28
28
”
E
”
C
H
H
1x2 Thread
Shown as it will appear
on the Xpressions unit
1X2 Thread
G
W
.5
F
”
B
59
A
28”
x
59”
2X1 Thread Horizontal
Shown as it will appear
on the Xpressions unit
Size
57
”
E
Diamond Shown as it
will appear on the
Xpressions unit
H
1x1 Flat Back
”
Size
28”
x
28”
W
H
1x1 Flat Back Shown
as it will appear on the
Xpressions unit
It is recommended that all text and borders be 2” from the finish size
see xpressions-snap.com for details
TM
NOTE: ALL SET UP INSTRUCTIONS
APPLY TO THE 4X3 US SKIN SIZES
AS WELL
• File Setup •
Setup Guide 2010
FOR GENERAL FILE SETUP CONSULT THE FULL FILE PREP GUIDELINE AT:
http://xpressions-snap.com/guidelines.htm
For all XSnap skins we require 1.5” of bleed OVERALL (.75” on all sides). If bleed is not provided to us
we will do our best to add/clone your artwork when applicable. If not, we will need to bleed out your
image to ensure we have enough for print/finishing. See example below:
Artwork provided
w/out bleed
Image bled out
for print size
Finished Size
• X-Factor •
Due to the nature of the Xpressions® graphics, we recommend keeping all artwork elements you do
not want distorted (ie text, logos, or faces) 3-5” in on all sides. Examples below:
5” in - least amount
of distortion
3” in - distortion
becomes more apparent
1” in - distortion
very noticeable
*PLEASE NOTE IF DISTORTION IS INTENDED AS PART OF DESIGN*
1x1 Flat Front 28” x 28”
(Template at full size)
SKIN H
Indicates 1.5” bleed
Indicates edge of skin
Indicates 3” focus area
Will be applied
to frame like this
SKIN G
1x1 Horizontal Thread 30” x 28”
(Template at full size)
Indicates 1.5” bleed
Indicates edge of skin
Indicates 3” focus area
Will be applied
to frame like this
SKIN F
1x1 Vertical Thread 28” x 30”
(Template at full size)
Indicates 1.5” bleed
Indicates edge of skin
Indicates 3” focus area
Will be applied
to frame like this
1x1 Flat Front 28” x 28”
(Template at full size)
SKIN E
Indicates 1.5” bleed
Indicates edge of skin
Indicates 3” focus area
Will be applied
to frame like this
2x2 Flat
(Template at full size)
SKIN D
Print Size: 59”w x 59”h
Final Size: 57.5”w x 57.5”h
X-FACTOR (Live Area) Shown: 3” in on all sides
X-FACTOR: 3-5” in on all sides. 3” in allows for moderate amount of distortion,
while 5” eliminates distortion almost altogether. If NO distortion is the desired
result, please contact your Graphic Support Representative. Consult
http://www.visproducts.com for comprehensive file prep and set up guides.
Will be applied
to frame like this
Will be applied
to frame like this
1x2 Thread 28” x 59”
(Template at full size)
SKIN C
Indicates 1.5” bleed
Indicates edge of skin
Indicates 3” focus area
2x1 Thread 59” x 28”
(Template at full size)
SKIN B
Indicates 1.5” bleed
Indicates edge of skin
Indicates 3” focus area
Will be applied
to frame like this
2x2 Diamond 38.5” x 38.5”
(Template at full size)
SKIN A
Indicates 1.5” bleed
Indicates edge of skin
Indicates 3” focus area