Tuscan Color Wash CS

Tuscan Color Wash
Elegant Accents for Tuscan Hand Applied Coatings
With a large color pallet to choose from, Tuscan Color Wash is perfect for
TUSCAN
STONEWORX
large walls, feature areas, and dramatic display backdrops.
Staining | Shading | Fresco
WWW.TUSCANSTONEWORX.COM
TS-105
Tuscan Color Wash
Elegant Accents for Tuscan Hand Applied Coatings
Description
Tuscan Color Wash system is a toner based method for
easily adding a traditional renaissance look to any field
applied wall. Staining, shading, and frescos are created
with a simple spray bottle system. Tuscan Color Wash Kit
includes 12-8oz jars. All colors are available as singles in
16oz jars.
Uses
Because of the virtually unlimited design capabilities color
washing provides, countless color tints, shades, and looks
can be easily achieved. Interior or exterior, focal walls or
large partitions, color washing will give your wall a dramatic
effect simply and affordably.
Coverage
All coverage’s are approximate and depend upon details
and individual application technique. When mixed 50:1
water to color ratio (in ounces) with clean water Tuscan
Color Wash will stain approximately 100sf.
Materials Needed:
 Spray Bottles
 Pressure Pump Spray Bottles
 Airless Spray Pump
 White rags
 Five Gallon Bucket(s)
 9” wide 1/4” Nap Roller
 Tuscan Colorant
Mixing Instructions
1. Fill bucket or spray bottle with clean water.
2. Add Tuscan Colorant to bucket or spray bottle with
clean water.
3. Mix the colorant completely.
4. Using spray bottles saturate the wall completely with
clean water.
5. Start from left to right in an “S” type motion when
applying color.
6. Dab up any drips or runs with rags.
7. Let dry for twenty-four hours to allow for curing.
8. Once dry, roll or spray on Tuscan Sealer.
9. Using a clean rag, wipe up remaining remnants with
warm soapy water.
Colors/ Finishes
Available in 12 standard colors, Tuscan Color Wash can be
blended together to create any color your imagination can
dream.
 Sunrise Yellow
 Earth Brown
 Chocolate Brown
 Rambling Rose
 Midnight Black
 Exotic Blue
 Forest Green
 Winter White
 Golden Yellow
 Burnt Red
 Lemon Yellow
 Siren Red
Tips & Tricks
 Before getting started always make a working
sample for quality control on your project. Doing so
will insure that your consistent with the color
desired.
 Mixing clean water first will keep Tuscan Colorant
from sticking to the sides or bottom of container.
 The color wash system can be mixed to any desired
ratio, but some great starting points are as follows;
 50:1 – 50 parts water to 1 part colorant.
 100:1 – 100 parts water to 1 part colorant.
 Wetting the wall down first will give you more control
of color. It will also allow multi-colors to blend
together easier.
 Applying colorant in an “S” type pattern is a great
way to start, however any technique will work.
 Use rags to dab up drips, you can also use your rag
to take off more color or manipulate the color to
where you prefer it.
 When applying sealant, make sure there are no
drips or heavy overlapping. If you do get
overlapping continue to roll until line disappears.
Technical & Field Services
Available upon request.
MSDS Sheets
See Tuscan StoneWorx Publication TS-800
Tuscan StoneWorx assumes no liability, expressed or implied, as to the architecture, engineering or workmanship of any project. To
ensure that you are using the latest, most complete information, contact Tuscan StoneWorx.
Tuscan StoneWorx 165 N. 1330 W., Ste. C‐3 Orem, UT 84057 (888) 368‐9494 WWW.TUSCANSTONEWORX.COM TS-105