Tuscan Color Wash - Tuscan Stoneworx

Tuscan Color Wash
Elegant Accents for Tuscan Hand Applied Coatings
With a large color pallet to choose from, Tuscan Color Wash is perfect for
TUSCAN
STONEWORX
large walls, feature areas, and dramatic display backdrops.
Staining | Shading | Frescos
WWW.TUSCANSTONEWORX.COM
TS-105
Tuscan Color Wash
Elegant Accents for Tuscan Hand Applied Coatings
Description
Tuscan Color Wash system is a toner based method for
easily adding a traditional renaissance look to any field
applied wall. Staining, shading, and frescos are created
with a simple spray bottle system. Tuscan Color Wash Kit
includes 12-8oz jars. All colors are available as singles in
16oz jars.
Uses
Because of the virtually unlimited design capabilities color
washing provides, countless color tints, shades, and looks
can be easily achieved. Interior or exterior, focal walls or
large partitions, color washing will give your wall a dramatic
effect simply and affordably.
Coverage
All coverage’s are approximate and depend upon details
and individual application technique. When mixed 50:1
water to color ratio (in ounces) with clean water Tuscan
Color Wash will stain approximately 100sf.
Materials Needed:
• Spray Bottles (small to medium jobs)
• Pressure Pump Spray Bottles (small to medium jobs)
• Airless Spray Pump (medium to large jobs)
• Five Gallon Bucket(s) (medium to large jobs)
• White rags
• 9” wide 1/4” Nap Roller
Mixing Instructions:
1. Fill bucket or spray bottle with clean water.
2. Add Tuscan Color Wash Colorant to bucket or spray
bottle.
3. Mix the colorant completely.
4. Using spray bottles saturate the wall completely with
clean water. This allows for longer work times and
more control over application.
5. Start from left to right in an “S” type motion when
applying color.
6. Dab up any drips or runs with rags.
7. Allow Color Wash to be dry to the touch before
sealing it.
8. Once dry, roll or spray on Tuscan Sealer.
9. Using a clean rag, wipe up remaining drips or
overspray with warm soapy water.
Colors/Finishes:
Available in 12 standard colors, Tuscan Color Wash can be
blended together to create any color your imagination can
dream. Colors correlate with standard color wheel.
•Sunrise Yellow
• Earth Brown
• Chocolate Brown
• Rambling Rose
• Midnight Black
• Exotic Blue
•Forest Green
• Winter White
• Golden Yellow
• Burnt Red
• Lemon Yellow
• Siren Red
Tips & Tricks
• Before getting started always make a working
sample for quality control on your project. Doing so
will insure that your consistent with the color
desired.
• Adding clean water first will keep Colorant from
sticking to the sides or bottom of container.
• The color wash system can be mixed to any desired
ratio, but a great starting point is 50:1.
• Wetting the wall down first will give you more control
of color. It will also allow multi-colors to blend
together easier.
• Applying colorant in an “S” type pattern is a great
way to start, however any technique will work.
• Use rags to dab up drips, you can also use your rag
to take off more color or manipulate the color to
where you prefer it.
• When applying sealer, make sure there are no drips
or heavy overlapping. If you do get overlapping
continue to roll until line disappears.
• Color Wash can be removed with soap and water, if
finished wall has been cured and sealed prior to
application.
Technical & Field Services
Available upon request.
MSDS Sheets
See Tuscan Stoneworx Publication TS-800
Tuscan Stoneworx assumes no liability, expressed or implied, as to the architecture, engineering or workmanship of any project. To
ensure that you are using the latest, most complete information, contact Tuscan Stoneworx.
Tuscan Stoneworx
165 N. 1330 W., Ste. C-4
Orem, UT 84057
(888) 368-9494
WWW.TUSCANSTONEWORX.COM
TS-105