E 50 Fully Automatic Hand Knife Sharpening Machine

Transcription

E 50 Fully Automatic Hand Knife Sharpening Machine
E 50
Fully Automatic Hand Knife Sharpening Machine
E 50
Fully Automatic Hand Knife Sharpening Machine
Measuring hand knives
Sharpening hand knives
The E 50 fully automatically sharpens knives of diverse shapes and sizes.
48 hand knives are placed randomly into the knife magazine.
They are processed as follows: The 4-axis operated gripping arm extracts a knife
out of the magazine – the exact individual knife shape is detected – the knife is sharpened,
­deburred and polished – the gripping arm returns the knife to the magazine.
The output is up to 400 knives per 8-hour shift.
K
nife gripping arm
The central organ of this machine is its 4-axis operated
knife gripping arm. It grabs the knife handle, moves
the knife through the different processing positions
and guides it, according to its exact shape, through the
sharpening stages.
Individual measurement
Before the sharpening program can begin, each
­individual knife is scanned at the measuring station.
The detected knife shape is then converted into CNC
data. The gripping arm steers the knife, according to
this data, through the complete sharpening process.
Thus, the original knife shape is retained through every
resharpening process.
Higher Safety – Higher Quality
Deburring hand knives
Polishing hand knives
4
00 Hand knives per 8-hour shift
The E 50 has a performance of up to 400 hand knives
per 8-hour shift, depending on the shape and size of
each blade.
K
nife magazine
The magazine consists of two cases and has slots for
48 knives, which can be loaded outside the machine
during the operating process. Since each knife is indivi­
dually measured before the sharpening process begins,
the magazine can be loaded with knives of a variety of
shapes and sizes.
Fully Automatic Hand Knife Sharpening Machine
E 50
Contour-Accurate Resharpening
Highest Cutting Performance
2
1
3
4
5
6
1
Knife gripping arm
2
Measuring station
3
W
et-grinding belt
4
D
eburring wheel
5
P
olishing wheel
6
K
nife magazine
E 50
Fully Automatic Hand Knife Sharpening Machine
Technical Data
D
epth
W
idth
H
eight W
eight 1825 mm
2300 mm
2900 mm
about 800 kg
Transport Measurements
H
eight by complete retraction W
idth without control panel D
epth without control panel 2400 mm
2300 mm
1400 mm
P
ower Input
B
ack-up fuse 11 kW 3x400 V 50Hz
32 A
C
ompressed air connection A
ir consumption K
nife magazine P
erformance 6,5 bar
< 50 l per minute
48 knives
400 knives per 8-hour shift max.
This machine meets the EU health and safety r­ equirements and features the CE-sign.
Technical modifications reserved.
max. 2300 mm
max. 2900 mm
max. 2300 mm
Knecht Maschinenbau GmbH
Witschwender Strasse 26 ■ 88368 Bergatreute ■ Germany
Phone +49 -7527-928-0 ■ Fax +49-7527-928-32
[email protected] ■ www.knecht.eu
max. 1825 mm
max. 1825 mm