Custom Classic 4000 series

Marimbas
Custom Classic 4000 series
Our 4000 series are designed for the “gigging” marimba players. The frames, resonators and stands are modular and very
easy to break down, transport and set-up. The unique and improved “one touch” button provides total height adjustment in
just seconds.
The 4000 series marimbas are available with premium Honduran Rosewood or concert quality African Padouk bars.
Resonator System
CCM 4010
Total Suspension
System
Total Suspension System
With just a press of a button the height of an instrument can be adjusted. Totally free frame suspension
is realized by using durable gas springs, which make the instrument balance optimum and adjustment
effortless.
Tuneable Resonators After years of research our R&D team has chosen rectangular bass resonators
which produce optimum resonance and projection in lower registers. These resonators are tuneable
now! In addition. our skilled tuning experts expertly tune each bar to exacting pitch standards.
Tuneable Resonators
Floating bar
suspension system
Floating Bar Suspension
Most notable is the new Floating Bar Suspension System (FBS). This proprietary bar support system
actually increases bar resonance by 20%!
Precision laser cut bar support arms are angled to insure that each and every bar is supported exactly to
the nodal point.
CCM 4010/4011/4012
5.0 Octave
Resonator system
Vancore resonators are individually hand tuned and assembled to an exclusive mounting system. This
system eliminates every kind of rattle or extraneous noise. Unlike other resonators, which or welded or
riveted, our system employs minimal contact technology. This virtually eliminates potential problems.
Double pin alignment
Double steel pin alignment guarantees that the solid Ash rails go in straight and stay straight! Special
clamps insure that the 2 piece rails are joined as one.
CCM 4004/4005/4006
4.5 Octave
CCM CCM
4013 4015
2.0
2.0
C-c1 C-c1
AP
HR
Technical Information
Technical Information
Double pin alignment
Custom Classic 4000 Series Marimbas
Model
CCM CCM CCM CCM CCM CCM CCM CCM
4001 4002 4003 4004 4005 4006 4010 4012
Octave Range
4.3
4.3
4.3
4.5
4.5
4.5
5.0
5.0
Note Range
A-c4 A-c4 A-c4 F-c4 F-c4
F-c4
C-c4 C-C4
Barsizes
71x27 - 40x21 mm
Bars*
AP
HR
V
AP
HR
V
AP
HR
Pitch
A = 442
Resonators
Tunable - Clamp System
Frame
Total Suspension System
Height Adjustment
90.5 - 111.5 cm
Casters
Large with Brakes
* AP = African Padouk HR = Honduran Rosewood V = Vibercore
Marimbas
The Vancore Marimbas are tuned in A=442 (standard). Other pitches that are available are A=438, A= 440 and A=444. Please
specify pitches other than standard when ordering
CCM 4001/4002/4003
4.3 Octave
Marimbas
Bass and Contra Bass Sections - As result of current innovations we are
happy to introduce a complete line of marimba bass sections of 2.0 and
2.5 octaves. They are available in 9000 and 4000 series and are a great
addition to extend the versatility of standard range instruments.
Technical Information
CCM 4015
!
r
e
i
l
p
p
u
s
n
ryou total percussio
Vancore Nederland b.v.
Tolhuswei 7a - 9
8501 ZP JOURE - The Netherlands
Tel: +31 513 415127
Fax: +31 513 413038
Email: [email protected]
www.vancore.com