How to Paint a Plastic Beverage Tray featuring Fusion for

PLASTIC BEVERAGE TRAY
page 1 of 2
Update a beverage tray to add a pop of color
to your party table.
PROJECT TIME
1/2 hour
SKILL LEVEL
1
2
3
4
5
MATERIALS
Krylon® Fusion for Plastic®
Satin Fern
All-purpose cleaner/degreaser
Drop cloth
INSTRUCTIONS
Painter’s tape
1
Set up a spray area by covering work area with a
drop cloth. Make sure it is a well-ventilated area.
2
Using an all-purpose cleaner/degreaser, wipe down
beverage tray to remove all dirt and oils. (If the plastic
is new, wipe down with paint thinner for best results.)
Rinse thoroughly with water and allow to dry.
3
Using painter’s tape, completely tape off any
area that you do not want painted.
4
Applying in a well-ventilated area, hold can
6-8 inches from the beverage tray surface and
paint the top and sides of the tray using a sweeping
side-to-side motion with slight overlap.
(continued on next page)
PLASTIC BEVERAGE TRAY
page 2 of 2
Update a beverage tray to add a pop of color
to your party table.
PROJECT TIME
1/2 hour
SKILL LEVEL
1
2
3
4
5
INSTRUCTIONS
5
Allow paint to dry for 30-60 seconds.
6
Continue to apply light, multiple coats,
waiting 30-60 seconds between each, until
you are satisfied with the appearance.
7
Turn tray over and repeat paint application process.
8
Krylon Fusion for Plastic dries in 25 minutes or
less, and can be handled in about one hour.
9
Allow the beverage tray to dry overnight before using.