ISO 9001 : 2008 09 100 121808 TMS
Transcription
ISO 9001 : 2008 09 100 121808 TMS
ISO 9001 : 2008 09 100 121808 TMS HIPERAUTO PRESENTATION ISO 9001 : 2008 09 100 121808 TMS HIPERAUTO CATALUNYA was founded in July 2004 by professionals with extensive experience in managing companies in the automobile industry. Inspired by their entrepreneurial spirit, they decided to create their own company to provide specialized services in bodywork and paintwork to different customers: • Vehicle manufacturers and auxiliary companies of the automotive industry. • Large fleets of vehicles (rental companies, courier services, transport...). • Individual customers, because of special agreements with leading European insurance companies and the creation of a multi-brand workshop of 3.400m2 to provide bodywork services and to train skilled workers. • Other car dealers without bodywork services. • Specialized in Paint less Dent Removal to remove hail damage all over the world. The main objective is to create a company committed to customer problems and to provide solutions in the vehicle manufacturing process (due to regular needs in production phase or special needs that may arise during the pre-series or new models launch in the market), in the maintenance process and in particular circumstances. HIPERAUTO PRESENTATION ISO 9001 : 2008 09 100 121808 TMS To achieve this goal, HIPERAUTO is surrounded by excellent professionals. After giving them a continuous formation, they control perfectly, each one in his specialization area, workshop problems, manufacturing plant problems or vehicles damaged by hail. Thus, HIPERAUTO offers customers the flexibility, skills, commitment and reliability that assures best solution to their problems within 24 hours. Facilities: ISO 9001 : 2008 09 100 121808 TMS VEHICLE MANUFACTURING PROCESS SERVICES Here are the services provided by HIPERAUTO in the vehicle manufacturing field, where the main customers are Vehicles Manufacturers and Auxiliary Companies of the Automotive industry. HIPERAUTO offers services to worldwide assemblers in various steps of manufacture process: • Prototypes: HIPERAUTO qualified personnel moves among the major manufacturers (VOLKSWAGEN, SEAT, OPEL, MERCEDES BENZ...) and their suppliers to do bodywork and all vehicle finishing touches. • Pre-Series and Series: HIPERAUTO specialized staff conducts audit and quality assurance services on any part, subassembly (doors, side covers, fenders, frames, floors, panels...), or on the complete body. Scope of service usually includes parts selection and rework. ISO 9001 : 2008 09 100 121808 TMS VEHICLE MANUFACTURING PROCESS SERVICES • Display Cars for Exhibition and Press: HIPERAUTO provides high qualified technicians to prepare display cars, including body assembly and adjustment, and body mobile elements examination, according to the quality standards of the customer. • Finished Vehicle Repair: Vehicles Car Body and finishing touches Specialists operate on the finish line / hospital. According to the quality standards laid down by the client, we rework all esthetic parts or interior finishing touches of the vehicle and recover the sheet metal damaged during the production process without new painting. • Hail Damages Repair: HIPERAUTO provides technicians specialized in PDR (Paintless Dent Removal, repair methods of painted car with dent on the body caused by hailstones). We have an important workmanship and qualified technicians able to work on large repair volumes (warehouses, ports, etc.) or to intervene on the manufacturers production lines (body work and finish line). WORKS IN PROGRESS Since 2007 GM Spain (GESTAMP Group as Tier 1) - Combo Model – Figueruelas (Spain) Quality control in all body production process stages (work in progress). GM Spain - Meriva Model – Figueruelas (Spain) Display and Press Cars Punctual reworks of parts in press line (for OPEL or Tier 1). Punctual Car float decrease following vehicles finish work. Punctual Support in finish line during weekends (painting) Since 2007 SEAT – Ibiza Model (2007) – Barcelona (Spain) Display and Press Cars Mass-production presses support (reworks and quality assurance; pre-series and serial production, included try one). HIPERAUTO has been certified by the SEAT Quality Equipment Purchase (Calidad Material Compras, CMC) for suppliers defects repairing and parts rework (Work in progress for different models: Ibiza, Altea, León, Exeo) ISO 9001 : 2008 09 100 121808 TMS ISO 9001 : 2008 09 100 121808 TMS COMPLETED WORKS 2004 HYUNDAI – Turkey Repair of vehicles damaged by hail without painting. 2005 RENAULT – Solblank (GESTAM Group) – Turkey Side parts stamping problems support. July 2008 to March 2010 VW Spain - Polo Model (2009) – Pamplona (Spain) Display Cars A05 (New Polo) 3d and 5d Support for Body Assembly works during launch phase (pre-series and first trials) Support for the Final Review during the launch phase (since trial one) Painting Quality Control COMPLETED WORKS ISO 9001 : 2008 09 100 121808 TMS 2009 Mercedes Benz Spain - Vito and Viano Models – Vitoria (Spain) Repair of completed vehicles ready to be delivered to the customer, seriously damaged by hail, avoiding a new body painting. HIPERAUTO has done many recovery works due to hail (PDR services) for many different brands (car manufacturers, brand sales services, logistic and distribution suppliers…) across Europe since 2005: Peugeot Villaverde (2002, 2005), Peugeot-GEFCO Toulouse (France, 2006), Peugeot Vasc Country (2007), Citroen Vitoria and Miranda de Ebro (2009), etc. HIPERAUTO also has experience providing PDR services out of Europe: USA, Lebanon (SEAT), Turkey (HYUNDAI) etc. ISO 9001 : 2008 09 100 121808 TMS CONTACTS HIPERAUTO CATALUNYA, S.L CL. GRANADA, 39 08740 SANT ANDREU DE LA BARCA BARCELONA TEL. (+34) 902 366 978 FAX: (+34) 936 825 091 WEB: www.hiperautocat.com E-MAIL: [email protected] Juan José AGUDO (+34) 618 968 235 [email protected] José PELLON (+34) 676 277 914 [email protected]