SSTB Anchor Bolts ®

Transcription

SSTB Anchor Bolts ®
Wood Strong-Wall® Shearwalls
SSTB® Anchor Bolts
Now the most economical anchorage solution for our Wood Strong-Wall®
shearwall is also code listed under the latest I-codes. The unique design
of the SSTB anchor bolt allows for smaller footings that require less
concrete. Additionally, the SSTB has been tested in the most common
Wood Strong-Wall foundation applications for use in all seismic design
categories and high-wind regions, so it is easier to specify than ever.
6 1/2"
1 1/2"
1 1/2"
Length
•• Embedment line on the shank and installation angle on the head help
ensure correct installation
Embedment
line (Top of
concrete)
Length
Features
•• Innovative offset angle reduces side blowout and provides more
concrete cover
Identification
on the bolt
head showing
embedment
angle and model.
3 1/2"
le
Embedment
line (Top of
concrete)
le
•• Head stamp includes length and the “No Equal” sign (≠) for easier
inspection after the pour
•• Unique shape results in less rebar interference
Codes: ICC-ES ESR-2611, City of Los Angeles RR 25827
Material: ASTM F1554, Grade 36
SSTB28L
SSTB28
Installation: Refer to ICC-ES ESR-2611 for design and instalation
information.
Minimum SSTB Anchor Requirements1,2
Wood Strong-Wall
Model
Garage Curb
Slab Edge
(Install with arrow
on top of the bolt
oriented as shown)
Non-Corner
Installation
(Bolt may be
installed @ 45° to
135° as shown)
Corner
Installation
(Install with arrow
on top of the bolt
oriented as shown)
SSTB28
SSTB28
Anchor Bolt
(Typ.)
SSTB283
Outer Edge of Concrete (Typ.)
1. This table applies to single story Wood Strong-Wall applications directly on
concrete. Two-story stacked applications may require high-strength anchors
(designed by others).
2. Additional applications may use the SSTB where the demand anchor tension
force is less than the allowable SSTB load shown in ICC-ES ESR-2611.
3. SW18x8/9, SW24x8/9, SW32x9, SW48x8/9/10 under seismic loading may use
SSTB28 with no load reductions. Maximum anchor tension force for all other
models shall be limited to 10,460 lbs (Wind and SDC A&B), and
8,785 lbs. (SDC C-F).
Plan View of SSTB Placement in Concrete
1 3/4"
Midwall
Corner
Length
C-L-SW14© 2014 SIMPSON STRONG-TIE COMPANY INC.
SW16
SW22
SW18
SW24
SW32
SW48
Slab on Grade
Corner
Installation
Wood Strong-Wall®
Finish: None. May be ordered HDG; contact Simpson Strong-Tie.
Slab not
shown for
clarity
11 1/4"
max.
12"
1 1/2"
12"
4" min.
Slab Edge
1 3/4"
Corner
11 1/4"
max.
1 1/2"
Plan View
Perspective View
Step-down end
Slab not
shown for
clarity
6"
4" min.
12"
Slab Garage Curb
16" min.
Perspective View
4" min.
Plan View
Interior shear bolts not shown for clarity
67