webinar flyer


webinar flyer
Compliant Energy Performance of Buildings Certificates and better
quality of the works — ground status, initiatives and perspectives
09:00 - 10:20 London, UK
10:00 - 11:20 Brussels, BE
11:00 - 12:20 Athens, GR
Participation to the Webinar is free. Register to receive the webinar link by email.
The Energy Performance of Buildings Directive recast gives ambitious goals for the building sector to
reduce energy use as well as greenhouse gas emissions. It requires member states to engage in the
generalisation of Nearly Zero-Energy Buildings and to set up the necessary actions to support the
mandatory availability of Energy Performance Certificates (EPC), both for new and existing buildings.
The objectives of this webinar are:
a) to show several issues on the quality of the EPC input data or the quality of the works that can be
detrimental to achieve compliance in practice;
b) to present preliminary results of field studies to evaluate initiatives addressing two of those issues.
Programme (Brussels time)
▪ Peter Wouters, INIVE, Belgium
QUALICHeCK's approach to quality and compliance
Introducing an EPC after completion of the building works: reasons behind and preliminary
lessons learnt in the Salzburg region of Austria ▪ Susanne Geissler, ÖGNB, Austria
Questions and answers
Compliance of heat transmission coefficients reported in EPCs in new houses in Cyprus
Compliance to summer thermal comfort requirements: control of overheating in new Estonian
apartment buildings ▪ Jarek Kurnitski, Tallinn University of Technology, Estonia
Questions and answers
▪ Marina Kyprianou Dracou, The Cyprus Institute, Cyprus
Cost and registration
Participation to the webinar is free, but requires you to register in advance. To register, please click on
the “Register now” link above or visit inive.webex.com and click on Event Center / List of Events.
Hardware and software
Our webinars are powered by WebEx Event Center. You will need an internet-connected computer running
Windows or Mac OS, with a sound card and speakers. After registration you will receive a link to join the
webinar. When the time comes, click on the link; WebEx will install the required application (Event
Manager) and open the “conference room” for you. You can already setup and test your system by visiting
inive.webex.com and clicking Set Up / Event Manager.

Similar documents