product list - Texas Knifemaker`s Supply

Transcription

PRODUCT LIST
A
Abrasive Materials......30,32,34-37
Acrylester.................................. 17
Adhesive, Spray........................ 36
Amber, Alternative..................... 12
Amber, Copal Beads................. 12
Anvils........................................... 5
Arkansas Stone......................... 30
Apron......................................... 27
Awl-Leather............................... 46
B
Bader Grinders.......................... 33
Baldor Buffers............................ 36
Bandsaw Blades.......................... 9
Belt Cleaner............................... 36
Belt Grinder............................... 33
Belt Sanding Equipment.......32-33
Belts.....................................34-35
Blades..................................49-77
Blade Kits.............................49-61
Blesbok...................................... 22
Blue Layout Fluid Spray......... 2,25
Blueing Supplies........................ 24
Bolsters................. 11,58,60-63,66
Bolts, Handle............................. 11
Bone (Jigged and Picked)......... 22
Bone (Natural, Smooth)........ 22,23
Books...............25,31,39-41,46,78
Boot Clips.................................. 28
Bowie Blades............................. 68
Brass Barstock & Rod................. 7
Brass Black............................... 24
Brass Sheet, & Tubing................. 7
Brush, File Cleaning.................. 28
Buffers....................................... 36
Buffing Compound...........32,36-37
Buffing Wheels.......................... 37
Buffing Wheel Rake................... 36
Burrs.......................................... 29
Bushings, Arbor......................... 36
Bushings, Pivot.......................... 54
C
Calipers..................................... 28
Camel Bone............................... 23
Camp & Kitchen Blades.......72-76
Cane & Stick Supplies............... 78
Carbide Drill Bits.......................... 9
Carbide Taper.............................. 9
Carbide Scribe........................... 28
Carbon Damascus Steel..........3-4
Carbon Fiber Concealex........... 47
Carbon Steel Blades..69-71,76-77
Cases for Knives.................. 48,53
Cast Iron Spear Point Blade...... 77
Celluloid Sheet Material............ 16
Center Punch............................ 27
Chicago Screw.......................... 47
Cleaners...............................24-26
Clamps...................................... 28
Cobalt Drill Bits............................ 9
Concealex................................. 47
Conchos.................................... 10
Contact Wheels......................... 33
Cool Tool II................................. 24
Coral (Fire & Tiger).................... 20
Corrosion X............................... 24
Countersink............................... 55
Cryogenic Tempering................... 1
Cutting Edge Majic.................... 24
D
Damascus Blades...........52,69-71
Texas Knifemaker’s Supply 2009
Damascus (Mosaic Bolsters)....... 3
Damascus Barstock.................3-4
DVD’s...................................41-43
DeburringTool............................ 28
Disc Spray Adhesive................. 36
Display Cases for Knives..... 48,53
Drill Bits....................................... 9
Drill Size Chart.......................... 28
Drum Sander Mandrels............. 35
“Dymondwood”.....................14-15
E
Ear Muff..................................... 26
Epoxy........................................ 38
Epoxy Colorants........................ 38
Etching Equipment...................... 6
Eye Loupe................................. 27
Eyelets..................................46-47
Ear Plugs.............................. 26,32
F
Fasteners, Handle..................... 11
File Guide.................................. 29
File Holder................................. 29
Files........................................... 29
Fillet Blades..........................56-57
Flitz............................................ 25
Flux, Flux Brush........................ 26
Foil Wrap..................................... 6
Folder Hardware...................54-55
Folder Knife Pouches................ 48
Folder Knife Kits...................49-53
Forging Steel............................... 2
Forks................................72,74-75
G
G-10..................................... 13,17
Glasses, Safety...................... 5,26
Gloves, Heat Treat...................... 5
Glue........................................... 38
Graphite Material-Flat Platen. ..... 33
Grinders..................................... 33
Grinding Wheel Dia. Chart........ 33
Groover, Leather....................... 46
Guards..............10,56,59,60-61,68
Gun Stock Wax.......................... 25
Gun Blue Pen............................ 24
H
Hammers, Blacksmith.................. 5
Handle Materials..................12-23
Hardness Tester.......................... 6
Hatchets.................................... 64
Head Spinner.............................. 9
Heat Absorbing Paste................ 26
Heat Treat Fire Brick Supports.... 5
Heat Treat Fork........................... 5
Heat Treat Knife Holders............. 5
Heat Treat Ovens..................... 5,6
Heat Treat Tongs......................... 6
Heat Treating Service.................. 1
Hippo Tusks............................... 23
Honing Oil.................................. 30
Horn Material............................. 22
I
Imistag....................................... 22
Impala Jigged Bone................... 22
Inlace Products.......................... 17
Inlay Kit, Liquid.......................... 17
Ivory, Alternative........................ 16
Ivory, Synthetic.......................... 16
J
Jigged Bone.............................. 22
K
Kitchen & Camp Blades.......72-76
Knife Blade Kits.....56,58-61,63-65
Knife Cases.......................... 48,53
Knife Grinding Magnet............... 33
Knife Making Steel...................... 2
Knife Scribe............................ 2,28
Knife Sheaths............................ 44
Kydex, Kydex Press............. 47,65
Kydex Eyelets.......................46-47
Kydex Foam.............................. 47
Kydex Sheath Material......... 47,65
L
Laminated Wood..................14-15
Laminated Blades...................... 77
Lansky Sharpeners................... 31
Lanyards.................................... 27
Layout Fluid............................... 25
Leather...................................... 45
Leather Cement......................... 45
Leather Dyes & Stains............... 45
Leather Knife Cases.................. 48
Leather Ring Spacers................ 45
Leather Wheels......................... 30
Letter Opener Blades................ 75
Liner Lock Kits......................50-51
Loupe (Magnifier)...................... 27
Lubricants.............................24-26
M
Magnetic Pickup........................ 27
Mammoth Ivory.......................... 21
Mandrels.................................... 35
Marine Metal Polish................... 26
Marking Gauge.......................... 27
Metal Dust for Inlay................... 17
Metal Prep............................24-26
Micarta Handle Material............ 13
Micarta Rod................................. 7
Micarta Tubing............................. 7
Micrometers............................... 28
Miracle Cloth............................. 25
Mokume....................................... 3
Mosaic Damascus....................... 3
Mosaic Pins................................. 8
Multi-Tool Belts.......................... 35
N
Neatsfoot Oil.............................. 45
Neoprene Handle Material........ 13
Nickel/Silver Barstock.................. 7
Nickel/Silver Rod......................... 7
Nickel/Silver Sheet...................... 7
Nickel/Silver Tubing..................... 7
Norwegian Blades..................... 77
O
O1 Toolsteel................................. 2
Oosik......................................... 23
Opti-Visor................................... 26
Ovens, Heat Treat....................5-6
Optic Rods, Clear..................... 7,8
P
PaleoBond................................. 20
Pearl - White, Gold Lipped,
Black Lipped, Laminate.......... 21
Picked Bone.............................. 22
Pin Vise..................................... 28
Pivot Pins.................................. 55
Pocket Clip Assembly Kit........... 49
Pocket Clip Blanks.................... 54
Polish....................................25-27
Polishing Cloths.................... 27,36
Polyester Pearl.......................... 16
Pommels................................... 11
Punch Plier for Leather.............. 45
R
Reamers...................................... 9
Reconstituted Stone.................. 16
Rivets, Handle........................... 11
Rouge-Polishing Compounds.... 37
Russell Knives........................... 76
S
Sand Paper (wet-dry)................ 35
Sanding Disc-Steel.................... 36
Sanding Rings for Mandrels...... 35
Sanding Sponge........................ 36
Satin Finish 6” Wheel................ 36
Screw Gage............................... 27
Screws, Folder.......................... 54
Scribes.............................. 2,27,28
Scrimshaw Kits.......................... 25
Sealer, Wood................... 18,24,26
Seals, Texas.............................. 11
Sharpening Equipment......... 30,31
Sheaths........................... 44,56,57
Sheep Horn............................... 22
Shop Rolls................................. 35
Snapsets................................... 46
Snap Setters......................... 46,65
Solder (Stay-Brite)..................... 26
Solingen Blades........................ 77
Spacer Material.................... 12,78
Spring Material.......................... 54
Stabilized Wood......................... 19
Stainless Steel Blades..........56-67
Stainless Steel Cleaner............. 25
Stainless Steel Rod & Sheet....... 7
Stainless Steel Tubing................. 7
Standoff (Stainless)................... 55
Step Drills............................... 9,55
Stick & Cane Supplies............... 78
Sting Ray Pouches............... 48,53
Sting Ray Skin........................... 45
Stop Pins................................... 54
Super Glue................................ 38
T
Tang Nuts.................................. 11
Tap & Tap Wrench..................... 55
Tape, Blue Masking................... 38
Taps............................................. 9
Thong Hole Tubing...................... 7
Thread Locker........................... 55
Thumb Bob................................ 55
Tiger Stripe Resinwood............. 15
Titanium Sheet............................ 7
Tomahawks............................... 75
Torx Wrenches........................... 54
Tuf-Cloth.................................... 25
Tuf-Glide Pen............................ 26
V
Videos..............................31,41-42
Vises.......................................... 28
W
Washers-Nylotron & Bronze...... 55
Wart Hog Tusks......................... 23
Water Buffalo .................. 12,20,78
Wax........................................... 27
Wheel Rake............................... 36
Wood Handle Material.....18-19,71
Wool Swabs............................... 45
Z
Zam...................................... 32,37
SERVICES
HEAT TREATING & TEMPERING SERVICES FOR AIR QUENCHABLE BLADES
aIR QUENCH ONLY-NO OIL QUENCH
We offer the service of heat treating and tempering of handmade blades in our shop. This service is scheduled for every Tuesday (except on major
holidays, in which case it will be done on the nearest full workday). Usually all blades are shipped out on the following Tuesday. We can do almost
any air hardening material as long as we have the instructions or the customer sends them with the blades. Blades must be in our shop by Monday
at 5:00 PM. We use custom built electric furnaces with digital controls. All air-hardening blades are double wrapped in stainless foil which eliminates most of the scale usually encountered in heat treating these items. The small amount of scale or discoloration is usually easily buffed off, but
occasionally more scale is encountered and heavier buffing is required. Our intent is to temper the blades to a Rockwell “C” hardness of 58 or 59.
Folder springs will be tempered to 43-45 Rockwell “C” unless otherwise requested. We heat treat and temper only air quenchable steels such as
440C, 440V, 154CM, ATS34, D2, A2, etc.
CAT. NO.
ITEM
PRICE/EACH
HTT1-7
Heat Treating & Tempering. 1-7 blades under 10” in overall length……......................….......................................................$5.50
HTT8 +
Discount Heat Treating & Tempering on 8 or more blades under 10” overall length......................................................................4.95
HTT>10” Heat Treating & Tempering. Blade length between 10-20”…………….……..............................................................................10.00
HTTVAS Heat Treating & Tempering of VASCOWEAR, CRUWEAR, BG42, 420V, CPM10V, etc...............................................................15.00
HTTSP
Heat Treating & Tempering of Folder Springs and Rockers….….....……................................................................................4.00
(*Call for pricing for blades over 20” and for other exotic steels)
SUB-ZERO QUENCH (-305F)
We are offering Deep Cryogenic Tempering to blades along with our normal heat treating and tempering. This will add one day to the usual heat
treating and tempering sequence. This service is also available for our factory finished blades. Deep Cryogenic Tempering is a one-time process
that removes all of the retained austensite (large unstable particles of carbon carbide) from the steel and transforms it to martinsite. Edge holding
properties are greatly enhanced by this process. When adding this service to heat treating & tempering, blades will usually be shipped out
on Wednesday of the following week.
CAT. NO. ITEM............................................................................................................................................................................ PRICE/EACH
SUBZ
Deep Cryogenic Tempering.................................................................................................................................................... $4.00
SUBZOR
Deep Cryogenic Tempering Gun Barrel...................................................................................................................... Call for price
OUR GUARANTEE
We make every possible effort to give each blade the best combination of hardness and toughness that we can through the proper use of our
equipment. However, if a blade is damaged due to our handling or equipment malfunction, our liability is limited to the replacement of an equal
amount of the same steel used in the damaged item. Any further responsibility will not be accepted nor will we be responsible for warpage due to
unequal grinding of the blade or item. We also reserve the right to refuse any blade that could have serious heat treating or warpage problems we
could not correct. Non-magnetic stainless steel does not harden. You can check stainless properties with a magnet.
OUR REQUIREMENTS FOR BLADES
For information about preparing and shipping blades, please read and fill out the heat treat and cryo form located on the last page of the catalog.
There are many new products in our
2009 Catalog. Look for the New! tag. We are a
full service knifemaking supply business. Just
about all of the products in our catalog have
been tested or used in our shop.
We appreciate your business, and we
are committed to providing you with the best
service. Our employees will be glad to help you
with any knifemaking question.
We also provide heat treating services,
and an on-line shopping cart at www.texasknife.com. Call us toll-free at 888-461-8632.
We would like to hear from you. Or, drop by
and see us at our shop located off of Beltway 8
West and I-10 in Houston, Texas.
Texas knifemaker’s supply
We would like to thank Houston, Texas
knifemakers, Bob Merz and Rendon Griffon for
allowing us to use pictures of their knives on
our cover.
The lever lock release automatic folder by
Rendon Griffin has a stainless Damascus blade
and bolsters. The blade is 3-1/2” long. The folder overall is almost 5”. The handle material is
made of a dark blue, dyed giraffe bone. You can
contact Rendon at www.griffinknives.com.
The “boot shaped” knife by Bob Merz has
a blade made of ATS-34 steel. The overall length
is 7-1/2” and the blade is 3-1/4”. Bolsters and
liners are 303 stainless steel and the liners are
file worked. The scales are stag jigged bone,
and the thumb stud inset is red Swarovski crystal. Bob’s website is www.merzknives.
com.
order toll free (888) 461-8632
fax (713) 461-8221
1
KNIFEMAKING STEEL
STEEL BARSTOCK & SHEET STOCK
PRECISION GROUND O1 TOOLSTEEL
The steel we presently offer is as it comes from the
mill and is not precision ground except when indicated by a PG after the catalog number. Some sizes
are pre-sanded to remove mill scale. It is annealed,
but still needs to be heat-treated and tempered, which
is a service we offer. (See Services) You may order
as little as one foot of steel. We do not charge for the
first cut. For custom cuts on bar stock we charge
$.50 per cut. PG = PRECISION GROUND
CAT.NO.
SIZES IN INCHES
PRICE/FOOT
O1-1........................1/8” x 1-1/4”.................................................... $10.95
O1-2........................1/8” x 1-1/2”...................................................... 12.95
O1-3........................5/32” x 1-1/2” ................................................... 14.95
O1-6........................3/16” x 1-1/4”.................................................... 14.95
O1-4........................3/16” x 1-1/2” ................................................... 15.95
O1-5........................1/4” x 2” ........................................................... 20.95
FORGING STEELS
CAT.NO.
SIZES IN INCHES
PRICE/FOOT
1080........................ 1/8” x 1-1/4” . ...................................................$6.95
1095........................ 1/8” x 1-1/2” . .................................................... 7.95
5160........................ 1/4” x 1-3/4” . ...................................................10.95
HI CONTRAST MATERIAL FOR MAKING DAMASCUS
440C STAINLESS STEEL
CAT.NO.
SIZES IN INCHES
PRICE/FOOT
SS004...................... 3/32” x 6” .......................................................$35.40
SS010...................... 1/8” x 1-1/4”...................................................... 8.95
SS010PG................ 1/8” x 1-1/4”......................................................12.95
SS011...................... 1/8” x 1-1/2”...................................................... 9.95
SS011PG................. 1/8” x 1-1/2” . ...................................................13.95
SS012...................... 5/32” x 1-1/2” . .................................................12.95
SS015...................... 3/16” x 1-1/2” . .................................................13.95
SS018...................... 1/4” x 2”............................................................19.50
Cat. No.
TYPE
SIZE
PRICE/FT
15N5..................15N20...........058” x 1-1/2” x 12”............................. $4.50
15N6..................15N20...........065” x 1-1/2” x 12”............................ $4.50
15N7..................15N20...........095” x 1-1/2” x 12”............................. $6.50
KNIFEMAKER’S SCRIBE
ATS34 STAINLESS STEEL
CAT.NO.
SIZES IN INCHES
PRICE/FOOT
SS330..................... 1/8” x 1-1/4”.................................................... $10.95
SS328..................... 1/8” x 1-1/2”...................................................... 11.50
SS328PG............... 1/8” x 1-1/2”...................................................... 14.95
SS329..................... 5/32” x 1-1/2”.................................................... 14.95
SS331..................... 3/16” x 1-1/2”.................................................... 15.95
D2 STEEL
CAT.NO.
SIZES IN INCHES
PRICE/FOOT
D2001...................... 1/8” x 1-1/4”...................................................... $9.50
D2002...................... 1/8” x 1-1/2”...................................................... 10.50
D2004...................... 3/16” x 1-1/2”.................................................... 12.95
CPM high-performance tool and specialty steels
are premier products of Crucible Specialty Metals
Division. The process of producing CPM products
involves gas atomization of pre-alloyed molten steel
to form powder that is then isostatically compressed
into 100% dense compacts, which creates among
other things, extremely uniform carbide distribution.
This process creates a product that offers improved
grind ability, toughness, and wear-resistance
CPM 154 STEEL
CAT.NO.
SIZES IN INCHES
PRICE/BAR
CPM1....................... CPM154 .103/.113” x 1-1/2”X 3’.................... $54.95
CPM2....................... CPM154 .135/.149” x 1-1/2”X 3’..................... 64.95
CPM3....................... CPM154 .180/.200” x 1-1/2”X 3’..................... 74.95
CAT. NO.
PRICE
SCRIBE1........................................................................................ $29.95
BLUE LAYOUT FLUID SPRAY
This blue fluid spray helps in laying out patterns on
steel and other metals. Also effective as an anti-flux
plus anti-heat paste.
NOTE: This product can be shipped
ground only
CAT. NO.
ITEM
PRICE
BLUE1...........12 oz can.....................................$7.95
Gift Certicates from
Texas Knifemaker’s
Supply. Get yours
today!!
texasknife.com
CPM D2 STEEL
CAT.NO.
SIZES IN INCHES
PRICE/BAR
CPM4....................... CPMD2 .103/.113” x 1-1/2”X 3’..................... $54.95
CPM5....................... CPMD2 .135/.149” x 1-1/2”X 3’....................... 64.95
CPM6....................... CPMD2 .180/.2” x 1-1/2”X 3’........................... 74.95
2
order on-line www.texasknife.com
fax (713) 461-8221
KNIFEMAKING STEEL
Devin Thomas DAMASCUS
Ladder
Fireball
Reptilian
Shark Tooth
MOKUME By Mike Sakmar
Mokume makes beautiful bolster and/or
guard material. We stock two bold and
distinguishing patterns, Raindrop and
Ladder, made from a couple of combinations of copper and brass or copper, brass
and nickel-silver. The size we stock is 1/8”
x 1-1/2” but other sizes are available.
Interested in 3/16” or 1/4” thicknesses
or other widths? Call us for prices and
availability.
LADDER
RAINDROP
CAT.NO.
Thickness-Width & Pattern
PRICE/INCH
MOK1...................... 1/8” Thickness X 1-1/2” - Ladder.................... $19.00
MOK2 ..................... 1/8” Thickness X 1-1/2” - Raindrop................. 19.00
EGGERLING BOLSTERS - MOSAIC DAMASCUS
Raindrop
Spirograph
Stainless Patterns
LADDER, RAINDROP, SPIROGRAPH, VINES AND ROSES, SHARK
TOOTH, REPTILIAN, & FIREBALL. Call for availability.
Carbon Damascus Patterns
LADDER, RAINDROP, VINES AND ROSES, SHARK TOOTH, REPTILIAN, & FIREBALL. Call for availability.
Stainless Patterns
CAT. NO.
Size
PRICE /IN
DTSD1............................ 1/8” x 1-1/4”..............................................$17.50
DTSD2............................ 5/32” x 1-1/4”............................................. 21.00
DTSD3............................ 3/16” x 1-1/4”............................................. 25.00
DTSD4............................ 1/8” x 1-1/2”............................................... 21.00
DTSD5............................ 5/32” x 1-1/2”............................................. 25.00
DTSD6............................ 3/16” x 1-1/2”............................................. 28.00
Carbon Damascus Patterns
CAT. NO.
Size
PRICE /IN
DTCD7............................ 1/8” x 1-1/4”..............................................$15.00
DTCD8............................ 5/32” x 1-1/4”............................................. 18.00
DTCD9............................ 3/16” x 1-1/4”............................................. 21.50
DTCD10......................... 1/8” x 1-1/2”............................................... 18.00
DTCD11.......................... 5/32” x 1-1/2”............................................. 21.50
DTCD12......................... 3/16” x 1-1/2”............................................. 28.00
EGMD1
EGMD2
EDMG3
EGMD4
EGMD5
EDMG6
The size of each piece is 1-1/8” x 1-3/8” x 1/8”. Made of Nickel and
Carbon Steel.
CAT.NO.
Thickness & Pattern
PRICE/PAIR
EGMD1....................1/8” Thickness - Leaf......................................$55.00
EGMD2 . .................1/8” Thickness - Windmill................................ 55.00
EGMD3....................1/8” Thickness - Checkerboard....................... 55.00
EGMD4....................1/8” Thickness - Cross Roads......................... 55.00
EGMD5....................1/8” Thickness - Tulip...................................... 55.00
EGMD6....................1/8” Thickness - Diamond............................... 55.00
MOSAIC DAMASCUS BY CHAD NICHOLS
EXPEDITED
SHIPPING
If you would like expedited shipping of your order, please do the
following: Call us at our toll-free
number, 888-461-8632 before
12 noon, Central Time. Place
your order and tell us that you
would like your order to go out
that day. We will verify that the
product is in stock and we will
ship it to you the same day.
X-CALIBER
RHAMBA
SPIDER WEB
CIRCUS
WALKER
NEMESIS
The size of each piece is 1-1/8” x 1-1/4” x 1/8”.
CAT.NO.
Thickness & Pattern
PRICE/PAIR
CNMD7....................1/8” Thickness - X-Caliber.............................. $49.95
CNMD8 . .................1/8” Thickness - Spider Web........................... 49.95
CNMD9....................1/8” Thickness - Rhamba................................ 49.95
CNMD10 . ...............1/8” Thickness - Circus.................................... 49.95
CNMD11..................1/8” Thickness - Nemesis................................ 49.95
CNMD12..................1/8” Thickness - Walker................................... 49.95
fax (713) 461-8221
3
KNIFEMAKING STEEL
Chad Nichols Carbon Damascus continued
Chad Nichols Carbon Damascus
LADDER
Lizard
TWIST
CROC SKIN
HAILSTORM
EGGS
Hirohito
HAZMAT
CNCD31612TW........... 3/16” x 1-1/2” x12”.....Twist pattern...........................$219.95
CNCD31612CS............ 3/16” x 1-1/2” x12”.....Croc Skin pattern..................... 219.95
CNCD31612HS............ 3/16” x 1-1/2” x12”.....Hailstorm pattern..................... 219.95
CNCD31612EG............ 3/16” x 1-1/2” x12”.....Eggs pattern............................ 219.95
CNCD31612HR............ 3/16” x 1-1/2” x12”.....Hirohito pattern........................ 219.95
CNCD31612HM........... 3/16” x 1-1/2” x12”.....Haz Mat pattern....................... 219.95
CNCD31634LD............ 3/16” x 1-3/4” x12”.....Ladder pattern......................... 269.95
CNCD31634LS............ 3/16” x 1-3/4” x12”.....Lizard Skin pattern................... 269.95
CNCD31634TW........... 3/16” x 1-3/4” x12”.....Twist pattern............................ 269.95
Chad Nichols Stainless Damascus
CATALOG NO.
DESCRIPTION
PATTERN
PRICE
CNCD1814LD.............. 1/8” x 1-1/4” x12”.......Ladder pattern........................$144.95
CNCD1814LS.............. 1/8” x 1-1/4” x12”.......Lizard Skin pattern....................144.95
CNCD1814TW............. 1/8” x 1-1/4” x12”.......Twist pattern.............................144.95
CNCD1814CS.............. 1/8” x 1-1/4” x12”.......Croc Skin pattern......................144.95
CNCD1814HS.............. 1/8” x 1-1/4” x12”.......Hailstorm pattern .....................144.95
CNCD1814EG.............. 1/8” x 1-1/4” x12”.......Eggs pattern.............................144.95
CNCD1814HR.............. 1/8” x 1-1/4” x12”.......Hirohito pattern.........................144.95
CNCD1814HM............. 1/8” x 1-1/4” x12”.......Haz Mat pattern........................144.95
CNCD1812LD.............. 1/8” x 1-1/2” x12”.......Ladder pattern......................... 174.95
CNCD1812LS.............. 1/8” x 1-1/2” x12”.......Lizard Skin pattern................... 174.95
CNCD1812TW............. 1/8” x 1-1/2” x12”.......Twist pattern............................ 174.95
CNCD1812CS.............. 1/8” x 1-1/2” x12”.......Croc Skin pattern..................... 174.95
CNCD1812HS.............. 1/8” x 1-1/2” x12”.......Hailstorm pattern..................... 174.95
CNCD1812EG.............. 1/8” x 1-1/2” x12”.......Eggs pattern............................ 174.95
CNCD1812HR.............. 1/8” x 1-1/2” x12”.......Hirohito pattern........................ 174.95
CNCD1812HM............. 1/8” x 1-1/2” x12”.......Haz Mat pattern....................... 174.95
CNCD1834LD.............. 1/8” x 1-3/4” x12”.......Ladder pattern......................... 209.95
CNCD1834LS.............. 1/8” x 1-3/4” x12”.......Lizard Skin pattern.................. 209.95
CNCD1834TW............. 1/8” x 1-3/4” x12”.......Twist pattern............................ 209.95
CNCD1834CS.............. 1/8” x 1-3/4” x12”.......Croc Skin pattern..................... 209.95
CNCD1834HS.............. 1/8” x 1-3/4” x12”.......Hailstorm pattern..................... 209.95
CNCD1834EG.............. 1/8” x 1-3/4” x12”.......Eggs pattern............................ 209.95
CNCD1834HR.............. 1/8” x 1-3/4” x12”.......Hirohito pattern........................ 209.95
CNCD1834HM............. 1/8” x 1-3/4” x12”.......Haz Mat pattern....................... 209.95
4
LADDER
RAINDROP
ROLL ON
KALIPSO
LADDER.COM
CATALOG NO.
DESCRIPTION
PATTERN
PRICE
CNSD1814LD............. 1/8” x 1-1/4” x 12”.........Ladder pattern..................... $159.95
CNSD1814RD............. 1/8” x 1-1/4” x 12”.........Raindrop pattern.................... 159.95
CNSD1814RO............. 1/8” x 1-1/4” x 12”.........Roll On pattern...................... 199.95
CNSD1814KA............. 1/8” x 1-1/4” x 12”.........Kalipso pattern...................... 199.95
CNSD1814LDC........... 1/8” x 1-1/4” x 12”.........Ladder.com pattern............... 199.95
CNSD1812LD............. 1/8” x 1-1/2” x 12”.........Ladder pattern....................... 199.95
CNSD1834LD............. 1/8” x 1-3/4” x 12”.........Ladder pattern....................... 239.95
CNSD53214LD........... 5/32” x 1-1/4” x 12”.......Ladder pattern....................... 169.95
CNSD53214RD........... 5/32” x 1-1/4” x 12”.......Raindrop pattern.................... 169.95
CNSD53214RO........... 5/32” x 1-1/4” x 12”.......Roll On pattern...................... 209.95
CNSD53214KA........... 5/32” x 1-1/4” x 12”.......Kalipso pattern...................... 209.95
CNSD53214LDC......... 5/32” x 1-1/4” x 12”.......Ladder.com pattern............... 209.95
CNSD31614LRO......... 3/16” x 1-1/4” x 12”.......Roll On pattern...................... 274.95
fax (713) 461-8221
HEAT TREAT OVENS & SUPPLIES
PARAGON OVENS
CAT. NO.
PRICE
KM-14D.....................................................................$1275.00
Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high
x 14-1/2” deep. Maximum temperature is 2000 degrees. 120
volts, 10 amps, 1200 watts. Includes complete instructions.
Approx. shipping weight is 100 lbs.
CAT. NO.
PRICE
KM-24D.....................................................................$1540.00
Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high
x 24” deep. Maximum temperature is 2000 degrees. 240 volts,
7.5 amps, 1800 watts. Includes complete instructions. Approx.
shipping weight is 140 lbs.
CAT. NO.
PRICE
KM-36D...................................................................................... $1775.00
Interior firing chamber of the oven is 5-1/2” wide x 4-1/4” high x 36” deep.
Maximum temperature is 2000 degrees. 240 volts, 11 amps, 2700 watts.
Includes complete instructions. Approx. shipping weight is 190 lbs.
HEAT TREATING KIT
CAT. NO.
PRICE
HTKIT............................$74.95
Knifemaker’s heat treating kit
contains 1 pair of hot gloves
(only for handling objects up to
400 degrees), 1 heat treating
fork, 4 knife holders, and 8 fire
brick supports.
KNIFE HOLDER FOR OVEN
CAT. NO.
PRICE
HTKH................ $10.50 EACH
High temperature pins pressed
into a ceramic base. They hold
the foil wrapped blades on
edge so that heat can circulate
around the blade. Sold per
each knife holder.
SAFETY GLASSES FOR HEAT TREATING
CAT. NO.
PRICE
HTSG.................................................$19.95 each
Protect your eyes with firing glasses. They are
coated to filter infra-red and ultra-violet light and
also to protect your eyes from heat and glare.
ANVIL
HEAT TREATING FORK
Made in the USA
All anvils are designed by Dilton Emerson. The anvils are made of 41/40
tool steel and the entire anvil is heat treated to 48-50c Rockwell.
CAT. #
SIZE
ANVL-TR1 100 LB
Face - 12-5/8” x 4”
Horn – 8-1/2”
Height – 10”
Base – 8-3/4” x 9”
CAT. #
SIZE
PRICE
ANVL-TR 150 LB
$795.00
Face - 16-3/4” x 4-3/16”
Horn – 10-3/16”
Height – 11-3/8”
Base – 10-3/8” x 9-7/16”
CAT. NO.
ITEM
PRICE
HTFORK................................. Heat Treating Fork.......................... $29.00
Easily removes knife holders and blocks from the hot furnace. A sliding
wooden handle allows you the most comfortable position for holding the
fork. 31” long.
HEAT TREATING GLOVES
CAT. NO.
PRICE
HTGLOVES............................. $41.00
For intermittent handling of hot objects
up to 400 degrees. Sold in pairs. Not
intended for handling hot blades!
FIRE BRICK SUPPORTS
CAT. NO.
PRICE/EA
HTFIRE............................ $5.00
Sold per each support. Position
each firebrick support under the
knifeholders inside the furnace,
so that you can slide the fork
under the holders.
PRICE
$585.00
ANVIL STAND
CAT. #
PRICE
ANST-TRH......................... $200.00
This stand is built to support the
100, 150 and 200 lb. anvils made
by Dilton Emerson.
CAT. #
SIZE
PRICE
ANVL-TR2 200 LB
$1060.00
Face - 17-1/2” x 4-1/4”
Horn - 10-1/2”
Height - 12”
Base - 10-1/4 x 12-1/2”
BLACKSMITH HAMMER
The blacksmith hammer is made by Plumb® and is available in a 40 oz.
and 48 oz. weight. The handle is hickory.
CAT. NO.
ITEM
PRICE
BLAC-2.................................. 40 oz................................................ $29.95
BLAC-3.................................. 48 oz.................................................. 34.95
fax (713) 461-8221
5
HEAT TREAT OVENS & SUPPLIES
DIGITAL HEAT TREAT OVEN
HARDNESS TESTER / FILE SET
This new, innovative file set provides
a quick, inexpensive and simple way
to check material hardness. The files
are marked with different colored
handles indicating different hardness
ranges. The files range from 40 HRC
to 65 HRC.The file that is able to mark
the material is the approximate hardness of the material.
CAT. NO.
ITEM
PRICE
HTF.................................. FILE SET............................................ $ 144.95
ELECTRO CHEM ETCHING EQUIPMENT
This is a great oven for the knifemaker. Available only in 240 volt, 13 amps,
3120 watts. It heats up very fast to the highest temperatures needed for the
knifemaker. Chamber size is 13-1/2” deep, 10” wide and 6-1/2” high. Available in other sizes. See below. Complete with a DIGITAL CONTROLLER.
Plenty of space to heat-treat and temper almost all blades. Shipping weight
is 70 pounds. Easy side opening door for quick loading and unloading.
Complete with two fire bricks to use as holders for your blades. You can slot
one for holding your blades and slot the other for cooling down outside the
oven. The ovens have performed nicely for our shop and our customers.
We use three of these ovens weekly to heat treat your blades.
Custom size ovens available. Please call for price.
CAT. NO.
SIZE
PRICE
OVEN13..............13-1/2” DEEP, DIGITAL CONTROLLER......... $ 985.00
OVEN18..............18” DEEP......................................................... 1040.00
OVEN22..............22” DEEP......................................................... 1095.00
OVENTHEMO.....THERMOCOUPLER............................................ 39.00
OVENHEATEL....HEATING ELEMENTS......................................... 48.00
STAINLESS STEEL FOIL WRAP
THE “PERSONALIZERTM”
An easy, fast way to etch any metal surface. 12 volt transformer,120V/AC,
with fuse, 60 Hz. Compact. Basic accessories, cord, applicator, felt pads,
stencil roll, and electrolyte. Power light.
CAT/NO.
ITEM
PRICE
ETCH1..................... THE “PERSONALIZER”............................. $145.00
Note: There is a $40.00 upgrade fee for International customers.
THE “PERSONALIZERTM PLUS”
This foil protects blades when heat-treating. Leaves your blades nearly
scale free. The foil is available by the roll and measures .002” x 24” x 50’.
If you don’t want to buy the whole roll, then buy foil by the running foot.
This is 2 square feet.
CAT. NO.
SIZE
PRICE
FOIL1................................ 5 FT.................................................... $29.95
FOIL2................................ 10 FT...................................................... 44.95
FOIL2................................ 50 FT.................................................... 169.95
HEAT TREAT TONGS
More power and speed than the “Personalizer”. Full 18 volt transformer,
120V/AC, with fuse, 60 Hz. Compact. State of the art SCR control. Basic
accessories, cord, applicator, felt pads, stencil roll, and electrolyte. Power
light, and AC/DC light.
CAT/NO.
ITEM
PRICE
ETCH2..................... THE “PERSONALIZER PLUS”................... $225.00
Note: There is a $40.00 upgrade fee for International customers.
These are a necessity for removing hot knives from the oven. With these
tongs, you can grip one foil packet easily, and remove it from the oven. We
use them every week when we heat treat blades. Tongs are 23” long.
CAT. NO.
ITEM
PRICE
TONGS................Heat Treat Tongs (23”)....................................... $29.95
CAT. NO.
ITEM
PRICE
ETCH10................... SCE-10 Electrolyte, Universal........................ $13.95
Good for most metals.
ETCH11................... AMC Cleaner....................................................13.95
ETCH12................... Electrolyte SC-E1 for Alum..............................13.95
Stainless, and Mild Steel.
ETCH13................... Stencil Roll.......................................................16.95
ETCH14................... Package of 15 replacement pads....................13.95
ETCHING SUPPLIES
6
fax (713) 461-8221
BARSTOCK, SHEET & ROD MATERIALS
BRASS
BRASS BARSTOCK
CAT. NO. SIZE
PRICE
BB001........ 1/16” x 1-1/2” x 12”............... $4.25
BB002........ 1/8” x 3/4” x 12” ..................... 4.95
BB003........ 1/8” x 1” x 12”......................... 6.95
BB004........ 1/8” x 2” x 12”....................... 12.95
BB005........ 3/16” x 3/4” x 12”.................... 5.95
BB006........ 3/16” x 1” x 12”....................... 7.50
BB007........ 3/16” x 2” x 12”..................... 13.50
BB008........ 1/4” x 1/2” x 12”...................... 6.95
BB009........ 1/4”x 3/4” x 12”....................... 7.50
BB010........ 1/4” x 1” x 12”....................... 12.50
BB011........ 1/4” x 2” x 12”....................... 18.00
BB012........ 5/16” x 1” x 12”..................... 18.00
BB013........ 3/8” x 3/4” x 12”.................... 12.00
BB014........ 3/8” x 1” x 12”....................... 14.50
BB015........ 3/8” x 1-1/2” x 12”................. 22.50
BB016........ 1/2” x 3/4” x 12”.................... 15.00
BB017........ 1/2” x 1” x 12”....................... 19.00
BB018........ 1/2” x 1-1/2” x 12”................. 29.50
BB019........ 3/4” x 1” x 12”....................... 29.50
BB020........ 1” x 1” x 12”........................... 42.00
BRASS ROD
CAT. NO. SIZE
PRICE
BR002........ 1/16” Dia. x 12”..................... $0.65
BR003........ 3/32” Dia. x 12”....................... 0.95
BR004........ 1/8” Dia. x 12”......................... 1.15
BR005........ 5/32” Dia. x 12” ...................... 1.45
BR006........ 3/16” Dia x 12”........................ 1.60
BR007........ 1/4” Dia. x 12”......................... 2.10
BR008........ 3/8” Dia. x 12”......................... 4.50
BR009........ 1/2” Dia. x 12”......................... 7.95
BR010........ 1-1/8” Dia. x1/2” POMMEL...... 3.45
BR0101...... 1-1/8” Dia. x 3/4” POMMEL...... 3.95
BR011........ 1-1/8” Dia. x 3” ....................... 7.95
BR012........ 1-1/8” Dia. x 12” ................... 28.95
BR013........ 1-1/4” Dia. x 1/2” POMMEL...... 4.50
BR0131...... 1-1/4” Dia. x 3/4” POMMEL...... 4.95
BR014........ 1-1/4” Dia. x 3” ....................... 9.95
BR015........ 1-1/4” Dia. x 12”.................... 39.95
BR016........ 1-1/2” Dia. x 1/2” POMMEL...... 6.00
BR0161...... 1-1/2” Dia. x 3/4” POMMEL...... 6.50
BR017........ 1-1/2” Dia. x 3” ..................... 12.50
BR018........ 1-1/2” Dia. x 12”.................... 44.95
BRASS SHEET
CAT. NO. SIZE PRICE
BS001 ....... 0.020” x 6” x 12” .................. $6.95
BS002 ....... 0.020” x 12” x 12” .............. 13.95
BS003 ....... 0.032” x 6” x 12” ................. 7.95
BS004 ....... 0.032” x 12” x 12” .............. 17.95
BS005 ....... 0.040” x 6” x 12” ................. 8.95
BS006 ....... 0.040” x 12” x 12” ............... 21.95
BS007 ....... 0.050” x 6” x 12” ................ 12.95
BS008 ....... 0.050” x 12” x 12” ............... 24.95
BS009 ....... 0.062” x 6” x 12” ................ 13.95
BS010 ....... 0.062” x 12” x 12” ............... 27.95
BS011 . ...... 0.090” x 6” x 12” ................. 24.95
BS012 ....... 0.125” x 6” x 12” ................. 32.95
BRASS THONG HOLE TUBING
CAT. NO. SIZE
PRICE
TU101.........3/16” O.D. x 12”..................... $2.25
TU102.........1/4” O.D. x 12”......................... 2.50
TU103.........5/16” O.D. x 12”....................... 2.75
NICKEL/SILVER
NICKEL/SILVER BARSTOCK
CAT. NO. SIZE PRICE
NSB02.......3/8” x 3/4” x 12”.................... $34.95
NSB03.......1/4” x 3/4” x 12”...................... 21.95
NSB04.......1/4” x 1” x 12”......................... 34.95
NICKEL/SILVER ROD 18% NI
CAT. NO. SIZE
PRICE
NSR01.......1/16” Dia. x 12”....................... $1.75
NSR02.......3/32” Dia. x 12”........................ 2.15
NSR03.......1/8” Dia. x 12”.......................... 2.50
NSR04.......5/32” Dia x 12”......................... 3.25
NSR05.......3/16” Dia. x 12”........................ 4.15
NICKEL/SILVER SHEET: 18% NI
CAT. NO. SIZE
PRICE
NSS01.......0.016” x 6” x 12” (1/64”)......... $7.95
NSS02.......0.016” x 12” x 12”................... 13.95
NSS03.......0.020” x 6” x 12”.................... 9.95
NSS04.......0.032” x 6” x 12”.................... 14.95
NSS05.......0.040” x 6” x 12”.................... 16.95
NSS06.......0.064” x 6” x 6” (1/16”).......... 12.95
NSS07.......0.064” x 6” x 12”.................... 23.95
NSS09.......0.093” x 6” x 6” (3/32”).......... 18.95
NSS10.......0.093” x 6” x 12”.................... 39.95
NSS11.......1/8” x 6” x 6”.......................... 39.95
NSS12.......1/8” x 6” x 12”........................ 59.95
NSS13.......1/4” x 6” x 6”.......................... 90.00
NSS14.......1/4” x 6” x 12”....................... 160.00
N/S THONG HOLE TUBING
CAT. NO. SIZE
PRICE
TU107........ 1/4”x 12” . .............................. $4.50
TITANIUM
TITANIUM SHEET: Type 6AL4V
CAT. NO. SIZE
PRICE
TS101........ 0.030” x 6” x 12” . ................ $29.95
TS103........0.040” x 6” x 12”..................... 39.95
TS105........0.050” x 6” x 12” .................... 47.95
TS107........0.060” x 6” x 12” .................... 59.95
TS109........0.100” x 6” x 12” .................... 96.95
MICARTA
MICARTA ROD
CAT. NO. SIZE
PRICE
MIR01....... Black 1/8” Dia. x 12” ............. $ 2.25
MIR02........Natural 1/8” Dia. x 12”.............. 2.25
MIR03........Black 5/32” Dia x 12” ............... 2.50
MIR04........Natural 5/32” Dia x 12” ............ 2.50
MIR05........Black 3/16” Dia x 12” ............... 3.00
MIR06........Natural 3/16” Dia x 12”............. 3.00
MICARTA THONG HOLE TUBING
CAT. NO. SIZE
PRICE
TU106........1/4” x 12”............................... $ 2.95
CLEAR OPTIC RODS
CAT. NO. SIZE
PRICE
CR125...... 1/8” dia. x 12”.......................... $0.65
CR187...... 3/16” dia. x 12”.......................... 0.75
STAINLESS STEEL
303 STAINLESS STEEL
BARSTOCK – RED TIP
CAT. NO. SIZE
PRICE
SB001.......1/8” x 1” x 12”......................... $8.50
SB003.......1/4” x 3/4” x 12”........................ 9.50
SB004.......1/4” x 1” x 12”........................... 9.50
SB005.......1/4” x 2” x 12”......................... 17.95
SB006.......5/16” x 3/4” x 12”.................... 11.50
SB007.......5/16” x 1” x 12”....................... 12.50
SB008.......3/8” x 3/4” x 12”...................... 11.95
SB009.......3/8” x 1” x 12”......................... 14.50
SB010.......1/2” x 3/4” x 12”...................... 16.95
SB011........1/2” x 1” x 12”......................... 19.95
303 STAINLESS STEEL
ROD– RED TIP
CAT. NO. SIZE
PRICE
SR001.......1/16” Dia. x 12”....................... $0.85
SR002.......3/32” Dia. x 12”......................... 0.95
SR003.......1/8” Dia. x 12”........................... 1.15
SR004.......5/32” Dia. x 12”......................... 1.35
SR005.......3/16” Dia. x 12”......................... 1.65
SR006.......1/4” Dia. x 12”........................... 1.95
SR007.......1-1/8” Dia. x 1/2” POMMEL.......... 3.50
SR0071.....1-1/8” Dia. x 3/4” POMMEL.......... 3.75
SR008.......1-1/8” Dia. x 3”.......................... 9.95
SR009.......1-1/8” Dia.x 12”....................... 24.75
SR010.......1-1/4” Dia. x 1/2” POMMEL.......... 3.95
SR0101.....1-1/4” Dia. x 3/4” POMMEL.......... 4.20
SR011........1-1/4” Dia. x 3”........................ 10.95
SR012.......1-1/4” Dia. x 12”...................... 27.95
SR013.......1-1/2” Dia. x 1/2” POMMEL.......... 4.75
SR0131.....1-1/2” Dia. x 3/4” POMMEL.......... 5.00
SR014.......1-1/2” Dia. x 3”........................ 16.95
SR015.......1-1/2” Dia. x 12”...................... 34.95
416 STAINLESS STEEL
BARSTOCK
CAT. NO. SIZE
PRICE
SB401.......3/16” x 1-1/2” x 12”............... $17.95
SB402.......1/4” x 1” x 12”....................... 16.95
SB403.......1/8” x 1” x 12”....................... 13.95
SB404.......3/8” x 1” x 12”....................... 19.95
416 STAINLESS STEEL ROD
CAT. NO. SIZE
PRICE
SR401.......3/32” x 12”.............................. $0.85
SR402.......1/8” x 12”.................................. 0.95
SR403.......3/16” x 12”................................ 1.50
304 STAINLESS STEEL SHEET
CAT. NO. SIZE
PRICE
SSS11.......0.032 x 6” x 12” ..................... $6.25
SSS12.......0.032 x 12” x 12” .................. 9.95
SSS13.......0.048 x 6” x 12” .................... 8.95
SSS14.......0.048 x 12” x 12” .................. 14.95
SSS15.......0.120 x 6” x 12” .................... 17.50
410 STAINLESS STEEL SHEET
CAT. NO. SIZE
PRICE
SSS41.......0.040 x 6” x 12”.................... $12.95
SSS42.......0.060 x 6” x 12”...................... 14.95
304 S.S. THONG HOLE TUBING
CAT. NO. SIZE PRICE
TU104........1/4” x 12” ............................... $3.75
fax (713) 461-8221
7
MOSAIC PIN MATERIALS
MOSAIC PINS BY BARRY POSNER
METAL
METAL
CAT NO.
SIZE
OUTSIDE
INSIDE
PRICE
MPP10-12...........1/4” X 12”............ BRASS.................NS, BRASS....................................$32.50
MPP10-06 ..........1/4” X 6” ............. BRASS ...............NS, BRASS.................................... 18.00
MPP11-12 . .........1/4” X 12” ........... BRASS ...............NS, COPPER................................. 32.50
MPP11-06 . .........1/4” X 6”.............. BRASS ...............NS, COPPER................................. 18.00
MPP12-12 ..........1/4” X 12”............ BRASS ...............NS, BRASS, COPPER................... 32.50
MPP12-06...........1/4” X 6”.............. BRASS ...............NS, BRASS, COPPER................... 18.00
MPP13-12...........1/4” X 12”............ BRASS ...............NS, BRASS, COPPER................... 32.50
MPP13-06...........1/4” X 6” ............. BRASS ...............NS, BRASS, COPPER................... 18.00
MPP14-12...........1/4” X 12”............ BRASS ...............NS, BRASS.................................... 32.50
MPP14-06...........1/4” X 6”.............. BRASS ...............NS, BRASS.................................... 18.00
MPP15-06...........1/4” X 6”.............. BRASS ...............NS, BRASS.................................... 18.00
MPP16-12...........1/4” X 12”............ BRASS ...............NS, BRASS, COPPER................... 32.50
MPP16-06...........1/4” X 6”.............. BRASS ...............NS, BRASS, COPPER................... 18.00
MPP17-06...........1/4” X 6”.............. BRASS ...............NS, BRASS ................................... 18.00
MPP31-12...........1/4” X 12”............ SS .......................NS, COPPER................................. 35.50
MPP31-06...........1/4” X 6”.............. SS........................NS, COPPER................................. 19.95
MPP32-12...........1/4” X 12”............ SS .......................NS, BRASS.................................... 35.50
MPP32-06...........1/4” X 6”.............. SS .......................NS, BRASS.................................... 19.95
MPP50-12...........1/4” X 12”............ NS . .....................NS, COPPER................................. 35.50
MPP50-06...........1/4” X 6” ............. NS . .....................NS, COPPER................................. 19.95
MPP200-12.........1/8” X 12” ........... BRASS.................NS.................................................. 19.95
MPP200-06.........1/8” X 6”.............. BRASS ...............NS ................................................ 10.95
MPP201-12.........1/8” X 12”............ BRASS ...............NS.................................................. 19.95
MPP201-06.........1/8” X 6” ............. BRASS ...............NS................................................. 10.95
MPP400-12.........1/8” X 12 ............ SS .......................COPPER, NS................................. 19.95
MPP400-06.........1/8” X 6” ............. SS .......................COPPER, NS................................ 10.95
MPP401-12.........1/8” X 12”............ SS .......................NS, COPPER................................. 19.95
MPP401-06.........1/8” X 6” ............. SS .......................NS, COPPER................................ 10.95
MPP402-12.........1/8” X 12”............ SS .......................COPPER........................................ 19.95
MPP402-06.........1/8” X 6”.............. SS .......................COPPER....................................... 10.95
CAT NO.
SIZE
Pictures of Mosaic pins are not to scale.
Refer to pictures for patterns only.
MOSAIC PINS BY sheila reed
METAL
OUTSIDE
METAL
INSIDE
PRICE
MP470B12.............. 7/32” X 12” ........ BRASS......... BRASS & BLACK..............................$ 21.95
MP470B6................ 7/32” X 6” .......... BRASS . .... BRASS & BLACK.............................. 12.95
MP470R12.............. 7/32” X 12” ........ BRASS . ...... BRASS & RED.................................. 21.95
MP470R6................ 7/32” X 6” .......... BRASS . ...... BRASS & RED.................................. 12.95
MP520B12.............. 7/32” X 12”......... BRASS......... BRASS & BLACK.............................. 16.95
MP520B6................ 7/32” X 6” .......... BRASS . ...... BRASS & BLACK............................. 10.50
MP520R12.............. 7/32” X 12”......... BRASS . ...... BRASS & RED.................................. 16.95
MP520R6................ 7/32” X 6” .......... BRASS......... BRASS & RED................................. 10.50
MP80B12................ 1/4” X 12” .......... BRASS . ...... BRASS & BLACK.............................. 26.95
MP80B6.................. 1/4” X 6” ............ BRASS . ...... BRASS & BLACK ............................ 15.50
MP80R12................ 1/4” X 12” .......... BRASS......... BRASS & RED.................................. 26.95
MP80R6 ................. 1/4” X 6” ............ BRASS......... BRASS & RED.................................. 15.50
MP83-12.................. 1/4” X 12” .......... BRASS......... BRASS & BLK,WHT,RED................. 28.95
MP83-6.................... 1/4” X 6” ............ BRASS......... BRASS & BLK,WHT,RED................. 16.50
MP81-12 ................. 1/4” X 12” .......... BRASS......... BRASS & BLK,WHT......................... 28.95
MP81-6.................... 1/4” X 6” ............ BRASS......... BRASS & BLK,WHT......................... 16.50
MP84-12 ................. 1/4” X 12”........... BRASS......... BRASS & RED,WHT........................ 28.95
MP84-6.................... 1/4” X 6” ............ BRASS......... BRASS & RED,WHT......................... 16.50
MP470B
MP80B
MP470R
MP80R
MP520B
MP83
MP520R
MP84
MP81
Pictures of Mosaic pins are not to scale.
Refer to pictures for patterns only.
CLEAR optic RODS
Back by popular demand, these are clear acrylic
rods. They are excellent for a see through illusion
and they are clearly fun to use.
CAT. NO. SIZE
PRICE
CR125...... 1/8” dia. x 12”.......................... $0.65
CR187...... 3/16” dia. x 12”.......................... 0.75
8
fax (713) 461-8221
DRILL BITS, REAMERS, BAND SAW BLADES
REAMERS FOR PRECISION HOLES
These are for perfecting the surfaces inside holes. They are an
absolute must for precision folder making.
CAT. NO.
ITEM
PRICE
REM1..............Straight Reamer 3/32” diameter............................... $8.95
REM2..............Straight Reamer 1/8” diameter................................... 9.95
REM3..............Straight Reamer 1/4” diameter................................. 10.95
REM4..............Straight Reamer .1885 diameter.............................. 12.95
TAPERED REAMER
Great to chamfer holes for peening pins for bolsters and guards.
CAT. NO.
SIZE
PRICE
REMTA1.................. 3/32” OD........................................................ $17.95
REMTA2.................. 1/8” OD............................................................ 18.95
SOLID CARBIDE TAPER
Great to chamfer holes for peening pins for bolsters and guards.
CAT. NO.
SIZE
PRICE
DRTAP.................... 1/4” OD.......................................................... $13.95
METAL CUTTING BAND SAW BLADES
Bi-metal blade, cryogenically treated for longer
life and durabililty.
CAT. NO. SIZE
PRICE
BAND1....... 93” x 1/2” x 18 TPI..............$ 59.95
BAND2....... 64-1/2” x 1/2” x 18 TPI...........49.95
STEP DRILLS*
*For bolts and rivets
These drill bits are designed to drill out holes
in scales to fit the fasteners and rivets listed
in the INDEX.
#1-Use for setting the 600SB, 700SB, and
800SB bolts and rivets.
It drills a stepped hole with a 5/32” dia.
pilot and 5/16” dia. step shoulder. This tool
makes a tough job easy and makes a square
shoulder too.
#2-Use for setting the 300B, 400B, and
500B hidden bolts.
It drills a 7/32” dia. pilot and 5/16” dia.
stepped shoulder.
#3-Use for setting the 350B, 450B, and
550B hidden bolts.
It drills a stepped hole with a 3/16” dia. pilot
and a 1/4” dia. stepped shoulder.
CAT. NO.
SIZE
PRICE
DRST1..................... STEP DRILL #1............................................. $17.95
DRST2..................... STEP DRILL #2............................................... 17.95
DRST3..................... STEP DRILL #3............................................... 17.95
COBALT DRILL BITS
SOLID CARBIDE DRILL BITS
CAT. NO.
SIZE
PRICE
DR009..................................... 1/16”............................................... $10.95
DR010..................................... #44 (.086)........................................ 11.25
DR011..................................... 3/32”................................................. 12.25
DR012..................................... 1/8”................................................... 13.75
DR013..................................... 5/32”................................................. 15.75
DR014..................................... 3/16”................................................. 17.95
DR015..................................... 1/4”................................................... 29.95
PRECISION TAPS
These are the taps we recommend for clip assembly, scale assembly,
liner tapping and repairs.
TAP080
TAP256
TAP1-72
TAP440
TAP632
CAT. NO
SIZE
PRICE
TAP080.................................. 0-80.................................................. $10.95
TAP172 ................................ 1-72.................................................... 10.95
TAP256.................................. 2-56.................................................... 10.95
TAP440.................................. 4-40.................................................... 10.95
TAP632 ................................ 6-32.................................................... 10.95
Note:
These drills are not for drilling
in metal, but they will drill just
about any kind of bone, wood,
or synthetic material used to
make scales.
CAT. NO.
SIZE
PRICE
DR003................................... 1/16”...................................................$2.10
DR#52................................... (0.0635”)(use for 1/16” pinhole)........... 2.10
DR#51................................... (use for pilot holes for 2-56 TAP)......... 2.10
DR#50................................... (0.070”)................................................2.10
DR#47................................... (0.0785”)..............................................2.10
DR044 .................................. (0.086)..................................................2.10
DR004................................... (0.09375) 3/32”................................... 2.10
DR#41................................... (0.096”) (use for 3/32” pinhole).................... 2.10
DR#40................................... (0.098”)................................................2.10
DR#31................................... (0.120”)................................................2.10
DR005 .................................. (0.125”) 1/8”.........................................2.45
DR#30................................... (0.1285”)(use for 1/8” pinhole)..................... 2.45
DR006 .................................. (0.15625”) 5/32”.................................. 2.75
DR#21................................... (0.159”)(use for 5/32” pinhole)...................... 2.75
DR007 .................................. (0.1875”) 3/16”.................................... 3.15
DR#12................................... (0.189”)(use for 3/16” pinhole)...................... 3.15
DR#8..................................... (0.199”)................................................3.15
DR008 .................................. (0.25”) 1/4”...........................................4.45
HEAD SPINNER
Will spin round heads on 1/16”, 3/32”,and
1/8” pinstock.
CAT.NO. ITEM
PRICE
HSP1...........HEADSPINNER.........$15.95
fax (713) 461-8221
9
GUARDS
TEAR DROP GUARD
TWO BRANCH GUARDS
PATTERN GUARDS
GHKGS
g142-B
GTD
g120-B
GTD2
g116-B
g116-NS
Large two branch are 3-7/8” x 1” x 7/32”.
Medium two branch are 3-1/2” x 3/4” x 7/32”.
Small two branch are 2-7/8” x 11/16” x 3/16”.
CAT. NO. TYPE
SIZE
PRICE
G142-B........BRASS......... Lg.................... $7.50
G142-NS.....NICK/SIL...... Lg...................... 8.50
G120-B........BRASS......... Med................... 6.50
G116-B........BRASS......... Sm..................... 5.95
G116-NS......NICK/SIL...... Sm..................... 7.50
The GHKGS is a 1-3/4” x 1” wide x 5/16” thick
sand cast guard. The tang hole is 1/8” wide and
1/2” long. The brass GTD tear drop guard is 1-3/4”
long, 1” wide, 1/8” thick with a 5/32” x 3/8” slot.
The brass GTD2 tear drop guard is 1-3/4” long,
1” wide, 1/4” thick with a 5/32” x 3/8” slot.
CAT. NO. TYPE
PRICE
GHKGS.....303 STAINLESS . ................. $ 8.95
GTD...........BRASS..................................... 5.50
GTD2.........BRASS..................................... 7.50
OVAL GUARDS
SINGLE BRANCH GUARDS
g141
g121
g115
Large single branch are 2-3/4” x 1” x 7/32”
Med. single branch are 1-7/8” x 7/8” x 7/32”
Small single branch are 1-3/4” x 11/16” x 3/16”
CAT. NO. TYPE
SIZE
PRICE
G141-B........BRASS......... Lg.................... $4.95
G141-NS.....NICK/SIL...... Lg...................... 7.95
G121-B........BRASS......... Med................... 4.95
G115-B........BRASS......... Sm..................... 4.95
G115-NS......NICK/SIL...... Sm..................... 6.95
CONCHOS
Texas star, 3D concho. Gold-plated
star, engraved antique silver plated
ring, screwback, 3/4 “ diameter.
Gold star, barbed wire concho. Gold
-plated star and barbed wire, silver
plated ring, screwback, 1” diameter.
CAT. NO
ITEM
PRICE
CONCHO1............... 1............................... $3.50
CONCHO2............... 1................................. 4.50
GMO
G114
Medium Oval Guards are 2” x 1” x 7/32”. Small
Oval Guards are 1-5/8” x 11/16” x 1/8”. They
either come in Brass or Nickel/Silver.
CAT. NO. TYPE SIZE PRICE
GMOB.......BRASS.................. Medium... $ 7.50
GMONS.....NICKEL/SILVER.... Medium...... 8.50
G114B.......BRASS.................. Small.......... 6.50
G114NS.....NICKEL/SILVER.... Small.......... 7.50
PRE-SLOTTED GUARDS
GKGB125
GKGB156
3/8” thick X 3/4” wide X 1-3/4” long.
CAT. NO. SLOT
MATERIAL
PRICE
GKGB125....1/8” X 1..... BRASS...............$ 7.50
GKGS125....1/8” X 1..... STAINLESS...........7.50
GKGB156....5/32” X 1... BRASS................. 7.50
GKGS156....5/32” X 1... STAINLESS...........7.50
CROWNED LUGGED GUARD
10
GBGM
GBGS
CROWNED GUARD
This guard is machined from solid barstock
1/2” x 1” x 4”. It is made for bowies, fighters, and
daggers with the crown or raised portion facing
the rear of the handle. Upper and lower ears
may be bent slightly and made oval to create a
really sharp appearance. Also has a machined
out center to start your work.
CAT. NO.
TYPE
PRICE
GNCG2B.........BRASS........................... $14.95
LUGGED GUARD
Machined from solid barstock 1/2” x 1” x 4” into
a great guard for those large bowies and fighting knives.
CAT. NO.
TYPE
PRICE
GNLG2B..........BRASS.......................... $14.95
BOLSTER SET
JIM’S BOWIE GUARD
Guard available in brass and nickel silver. Fits
BL720C. 1/4” thick, 3/4” wide, and 4” long.
CAT. NO.
TYPE
PRICE
GB720.............BRASS............................. $9.95
GN720.............NICKEL /SILVER.............. 15.95
GBGL
GBGS Guard is 2-1/8” long, 5/32” thick, and
11/16” wide. Slot is 1/2” long and 5/32” wide.
Brass only.
GBGM Guard is 2-3/4” long, 13/16” wide, and
5/32” thick. Slot is 1/2” long and 3/16” wide.
Brass only.
CAT. NO.
TYPE/SIZE
PRICE
GBGS............. BRASS S GUARD............ $9.95
2-1/8” LONG
GBGM............ BRASS S GUARD............ 11.95
2-3/4” LONG
GBGLBR The two ends of this guard turn toward
the tip of the blade. The guard is 3-1/8” long,
15/16” wide, 5/32” thick. Slot is 1-1/4” long and
3/16” wide. Fits larger blades like BL471 and
BL148. Brass and N/S.
CAT. NO.
TYPE
PRICE
GBGLBR........BRASS C GUARD.......... $15.95
Guard is machined from brass. 3/4” x 1” x 4”
long.
CAT. NO.
TYPE
PRICE
GNCLG2B.......BRASS........................... $18.95
Molded on top edges and flat on handle,1/4”
thick X 1-1/4” X 1-1/8”.
CAT. NO.
ITEM
PRICE
BOBR............BRASS............................... $9.95
fax (713) 461-8221
HANDLE FASTENERS, RIVETS, POMMELS
TEXAS SEALS
TXSEAL1
TXSEAL2
TANG NUTS
TXSEAL3
TXSEAL4
TXSEAL5
TXSEAL6
These seals are available in several different
sizes and finishes. They are generally used on
the handle material as an inlay. TXSEAL1. 2. 3.
4 amd 5 have “The State of Texas” inscribed on
the surface of the seal. TXSEAL6 has “Texas
Rangers” inscribed on the surface of the seal.
The seals are approximately 1/16” thick.
CAT. NO.
ITEM
PRICE
TXSEAL1.... Gold Finish 7/16”.................$5.00
TXSEAL2.... Silver Finish 7/16”..................5.00
TXSEAL3.... Black & Gold Finish 3/4”........8.95
TXSEAL4.... Black & Silver Finish 3/4”.......8.95
TXSEAL5.... Gold Star on Silver 11/16”......8.95
TXSEAL6.... “Texas Rangers” Gold 3/4”.....8.95
CORBY FASTENERS
200B
250B
300B
350B
Sold as one bolt plus one nut. Heads are slotted 1/4” and 5/16” diameter with 7/32” diameter
shaft. These look like pins when finished. Use
step drill #3 for the 1/4” and step drill #2 for the
5/16”.
CAT. NO. ITEM
PRICE
200B..........ALUMINUM 5/16”................... $2.00
250B..........ALUMINUM 1/4”....................... 2.00
300B..........BRASS 5/16”............................ 2.00
350B..........BRASS 1/4”.............................. 2.00
400B..........STAINLESS STEEL 5/16”........ 2.25
450B..........STAINLESS STEEL 1/4”.......... 2.25
500B..........NICKEL/SILVER 5/16”.............. 3.50
550B..........NICKEL/SILVER 1/4”................ 3.50
SCREW TYPE FASTENERS
700SB
600SB
Sold as one bolt plus one nut. These are probably the easiest to use of the bolts. Bolt heads
are 5/16” diameter with 5/32” diameter threaded
shafts. Slotted. Use step drill #1.
CAT. NO. ITEM
PRICE
600SB.......BRASS BOLT......................... $1.75
700SB.......NICKEL/SILVER....................... 2.65
800SB.......STAINLESS STEEL................. 1.75
#1
#2
TN101
TN102
#1 This little brass nut fits most of the high
carbon steel hidden tang blades. Threaded
10/24. It is slotted on one end for tightening up
the handle.
CAT. NO. ITEM PRICE
TN101..........10mm dia., 8mm tal.............. $0.95
#2 This is the little brass nut that fits the Japanese blades that are threaded 10/32 as in blade
numbers 527, 525, and 452. This one has a slot
on one end for tightening up the handle.
CAT. NO. ITEM
PRICE
TN102...........3/8” dia., 1/4” long.............. $0.95
BRASS POMMELS
301
302
303
304 305
These beautiful brass pommels have a center
drilled base threaded with a 1/4” x 20 tap.
CAT. NO. ITEM
PRICE
POM301......BRASS POMMEL.............. $10.95
POM302......BRASS POMMEL.............. 10.95
POM303......BRASS POMMEL.............. 10.95
POM304......BRASS POMMEL.............. 10.95
POM305......BRASS POMMEL.............. 10.95
POMMELS 1” DIA.
LOVELESS FASTENERS
Sold as one stainless steel screw and two brass
nuts. Screw is 1-3/16” long and nuts are 5/16”
diameter. Use step drill #1. When assembled just
grind off the screw head and whatever is left of
the other end. You should end up with a stainless
dot inside a brass ring.
CAT. NO
ITEM
PRICE
BBS1............ 1.......................................... $1.50
RIVETS
These solid pommels are not tapped. They
have a 1” diameter base. The pointed pommel
is 1-1/8” in height. The oval pommel is 3/4” in
height and the ball pommel is 1-1/8” in height.
CAT. NO. ITEM
PRICE
POM153...... BRASS POINTED......................$9.95
POM154...... BRASS OVAL............................... 9.95
POM155...... BRASS BALL............................... 9.95
POM163...... NICKEL/SILVER POINTED........12.95
POM164...... NICKEL/SILVER OVAL..............12.95
POM165...... NICKEL/SILVER BALL...............12.95
BRASS POMMELS
Sold in a pair of one male part and one female
part. Brass rivets with 5/16” diameter head and
5/8” long shaft. Usually for use on kitchen or
patch knives. Use #1 step drill for correct head
setting. Nickel/silver rivets have 5/16” diameter
head and 1/2” long shaft.
BRASS (5/8” long shaft)
CAT. NO.
PAIR / 1 F,1 M
PRICE
R800R........................... 1......................... $0.16
R800R50..................... 50........................... 7.50
R800R100.................. 100........................ 12.95
R800R500.................. 500........................ 56.00
NICKEL/SILVER (1/2” long shaft)
CAT. NO.
PAIR / 1 F,1 M
PRICE
R900R........................... 1
$0.35
R900R50.................... 50.......................... 15.95
R900R100.................. 100........................ 28.95
R900R500.................. 500...................... 122.50
KNIFE SHOWS
See the shows we will be attending at texasknife.com.
We hope to see you there!
POM203
POM202
POM201
These brass pommels are precision turned.
They fit hidden tang blades. (Need 10mm “tang
nuts”).
CAT. NO. ITEM
PRICE
POM201...... SM BRASS POMMEL.......... $5.95
POM202......MED BRASS POMMEL.......... 6.95
POM203......LG BRASS POMMEL............. 7.95
CAST POMMELS
POM151 POM152 POM161 POM162
The large pommel is 5/8” high by 1-1/8” at
its base tapering to 3/4” at the top. The small
pommel is 3/8” high by 7/8” diameter at its base
tapering to 3/4” at the top.
CAT. NO.
ITEM
PRICE
POM151 ...........BRASS SMALL............... $4.95
POM152 ...........BRASS LARGE................ 5.95
POM161............N/S SMALL....................... 5.50
POM162............N/S LARGE...................... 5.95
fax (713) 461-8221
11
SPACER MATERIALS
HIGH TECH PLASTIC SPACER
Spacer material is made from engraving stock. This material is only .024”
thick. The colors are super bright and this spacer is waterproof. Colors
now available are: Yellow, Green, Black, Red, White, and Blue.
CAT. NO.
COLOR
SIZE
PRICE
SPR24B.................. BLACK............................ 6” x 12”.................... $7.95
SPR24G.................. GREEN........................... 6” x 12”...................... 7.95
SPR24R.................. RED................................. 6” x 12”...................... 7.95
SPR24W.................. WHITE............................. 6” x 12”...................... 7.95
SPR24Y................... YELLOW......................... 6” x 12” ..................... 7.95
SPR24BU................ BLUE............................... 6” x 12........................ 7.95
5-LAYER SPACER
This material is available in 0.1” thickness.
It is five layers of colored material (plastic)
all laminated together. It is waterproof and
colorfast. Layers are about .02” thick. Looks
good on the hidden tang knives. Available in
sizes and color combinations listed below.
1/16” 3-LAYER MULTICOLOR SPACERS
CAT. NO.
COLOR
SIZE
PRICE
SPR5LAY1 ...Red-white-black-white-red...............12” x 12” ......... $29.95
SPR5LAY2 ...Red-white-black-white-red...............6” x 12”.............. 16.95
SPR5LAY3 ...Red-white-black-white-red...............1-1/2” x 12”.......... 7.95
SPR5LAY4 ...Black-white-black-white-black..........12” x 12”............ 29.95
SPR5LAY5 ...Black-white-black-white-black..........6” x 12”.............. 16.95
SPR5LAY6 ...Black-white-black-white-black..........1-1/2” x 12”.......... 7.95
3-LAYER SPACER
This material is available in .100” thickness.
It is three layers of colored material (plastic)
all laminated together to save you the time.
It is waterproof and colorfast. It is available
in three-color layers of red-white-blue, blackyellow-black, and yellow-black-yellow.
SPACER PACK
CAT. NO.
COLOR
SIZE PRICE
SPRPACK1 ............ Assorted...................... Assorted.................... $29.95
WATER BUFFALO THICK SPACERS
ALTERNATIVE AMBER SPACER
Amber cylinder that
measures 1-1/2”
diameter x 1” thick.
CAT. NO. PRICE
AA01C............................ $5.95
Example of knife with
COPAL AMBER BEAD
There are two sizes.The large bead
measures approx. 1-1/4” x 1-1/2”. The
small bead measures approx. 1-1/8”
x 1-1/8”.
CAT. NO. PRICE
CAB-SM......................$11.95
CAB-LG........................ 12.95
NICKEL SILVER & BRASS SPACERS
These spacers make an excellent color
contrast on hidden tang knives. They are
1” in diameter with a 3/16” hole.
This spacer pack is particularly handy for beginning
knifemakers. It consists of a variety of sizes and
colors and types of spacers that we carry. The pack
will contain (5) vulcanized spacers approximately
4” x 6”, (5) high tech plastic spacers approximately
1-1/2” x 12”, and a mixture of (5) 3-layer and 5-layer
spacers that are approx. 1-1/2” x 12”. Prepackaged
in an assortment of colors. We cannot guarantee any
certain colors or layer configurations.
12
Spacer material is made from engraving stock. The colors are super bright
and this spacer is waterproof. The total thickness of the spacer is .0625”.
The center color is approximately .040” thick and the outer colors are
approximately .011” thick.
CAT. NO. COLOR SIZE PRICE
SPR3LAY10............Red-white-red...........................6” x 12”.......... $10.95
SPR3LAY11............White-black-white.....................6” x 12”............ 10.95
SPR3LAY12............Black-white-black.....................6” x 12”............ 10.95
COPAL AMBER BEADS
CAT. NO.
COLOR
SIZE PRICE
SPR3LAY1 .......Red-white-blue...................... 12” x 12”................ $29.95
SPR3LAY2 .......Red-white-blue...................... 6” x 12” ................... 16.95
SPR3LAY3 .......Red-white-blue...................... 1-1/2” x 12” ............... 7.95
SPR3LAY4 .......Black-yellow-black................. 12” x 12” ................. 29.95
SPR3LAY5 .......Black-yellow-black................. 6” x 12” ................... 16.95
SPR3LAY6 .......Black-yellow-black................. 1-1/2” x 12”................ 7.95
SPR3LAY7........Yellow-black-yellow............... 12” x 12”.................. 29.95
SPR3LAY8........Yellow-black-yellow............... 6” x 12” ................... 16.95
SPR3LAY9........Yellow-black-yellow............... 1-1/2” x 12”................ 7.95
These spacers are 1-1/2” diameter and
1” thick. Used as a black, natural horn
spacer, they can really dress up those
knife handles.
CAT. NO.
AMOUNT PRICE
WBSP22..............1..........................$3.25
WBSPDOZ..........DOZEN................ 34.95
VULCANIZED SPACER
In sheet form to use under scales and behind guards to enhance the handle
or to use as fill in as needed. Available in two thicknesses.
CAT. NO. THICKNESS COLOR SIZE
PRICE
SPR03B........0.02” ....... BLACK.............................6” x 4”................ $0.75
SPR03W........0.02” ....... WHITE.............................6” x 4”.................. 0.75
SPR04B........0.02” ....... BLACK.............................12” x 12” ............. 1.95
SPR04W........0.02” ....... WHITE.............................12” x 12”.............. 1.75
SPR05B........0.03” ....... BLUE................................6” x 4” ................. 1.00
SPR05R........0.03” ....... RED.................................6” x 4”.................. 1.00
SPR06B........0.03” ....... BLUE................................12” x 12” ............. 2.95
SPR06R........0.03” ....... RED.................................12” x 12” ............. 2.95
SPR07R........0.03”........ BRICK RED.....................12” x 12” ............. 2.95
SPR08R........0.03”........ BRICK,BLK,BRICK..........12” x 12”.............. 2.95
CAT. NO. MATERIAL
THICKNESS
PRICE
NBP201................. Brass............................... .032............................ $2.50
NBP202................. Brass............................... .047.............................. 2.50
NBP203................. Brass............................... .062.............................. 2.50
NSP202................. Nickel/Silver.................... .047.............................. 2.50
WATER BUFFALO SPACERS
1-1/2” diameter and ¼” thick flat black or red
button. Sold individually or by the dozen.
CAT. NO.
COLOR AMOUNT PRICE
WBSP11........BLACK...... 1...................... $1.50
WBSP12........BLACK...... DOZEN........... 16.50
WBSP13........RED........... 1........................ 2.50
WBSP14........RED........... DOZEN........... 27.50
fax (713) 461-8221
HANDLE MATERIALS
MICARTA
CANVAS BASED MICARTA
SCALES are sold in pairs that are approx. 1-1/2” wide
x 5” long x thickness indicated in item description.
PIECES are 5” wide x 12” long x indicated thickness.
BLOCKS are 1-1/2” wide x 5” long x 1-1/8” thick.
BLOCK PIECES are 5” wide x 12” long x 1-1/8” thick.
Normal cutting should produce 4 pairs of scales from a “piece”
or 8 blocks from a “block piece”. This usually amounts to a 25%
discount if you buy the pieces and do the cutting yourself.
PAPER BASED MICARTA
This Micarta comes in Ivory, Black, and Butterscotch. The “Ivory” Micarta
resembles ivory in color. It is also a very good material for Scrimshaw
because its texture does not vary vastly as does the natural material. This
material does not yellow with age. See inside back cover of the catalog
for a picture of Micarta.
CAT.NO. ITEM
PRICE
MI001......IVORY MICARTA SCALES1/16” thick...............................$4.00
MI002......IVORY MICARTA PIECES 1/16” thick...............................14.00
MI003......IVORY MICARTA SCALES 1/8” thick..................................4.95
MI004......IVORY MICARTA PIECES 1/8” thick.................................17.95
MI005......IVORY MICARTA SCALES 1/4” thick..................................7.95
MI007......IVORY MICARTA SCALES 3/8” thick................................10.95
MI009......IVORY MICARTA SCALES 1/2” thick................................12.95
MI013......BLACK PB MICARTA SCALES 1/4” thick...........................2.95
MI014......BLACK PB MICARTA PIECES 1/4” thick............................8.95
MI015......BLACK PB MICARTA SCALES 3/8” thick...........................3.95
MI016......BLACK PB MICARTA PIECES 3/8” thick..........................10.95
MI017......BUTTERSCOTCH PB SCALES 3/8” thick..........................5.95
MI018......BUTTERSCOTCH PB PIECES 3/8” thick.........................16.00
LINEN BASED MICARTA
A linen-based material, which is very durable and shows some pattern
due to the layers of fine cloth. See inside back cover of the catalog for a
picture of Micarta.
CAT.NO. ITEM PRICE
MI019 .......BLACK LINEN MICARTA SCALES 1/8” thick.................$2.00
MI020 .......BLACK LINEN MICARTA PIECE 1/8” thick . ....................6.50
MI023 .......BLACK LINEN MICARTA SCALES 1/4” thick ..................4.50
MI024 .......BLACK LINEN MICARTA PIECE 1/4” thick . ..................13.95
MI025 .......BLACK LINEN MICARTA SCALES 3/8” thick ..................5.95
MI026 .......BLACK LINEN MICARTA PIECE 3/8” thick . ..................17.95
MI027 .......BLACK LINEN MICARTA BLOCK 1-1/8” thick .................7.95
MI028 .......BLACK LINEN MICARTA BLOCK PIECE 1-1/8” thick....49.95
MI029 .......MAROON LINEN MICARTA SCALES 1/8” thick ..............7.95
MI030 .......MAROON LINEN MICARTA PIECE 1/8” thick ...............21.95
MI031 .......MAROON LINEN MICARTA SCALES 1/4” thick ............13.50
MI033 .......MAROON LINEN MICARTA SCALES 3/8” thick ............15.50
MI035 .......RED LINEN MICARTA SCALES 1/8” thick ......................4.00
MI036 .......RED LINEN MICARTA PIECE 1/8” thick ........................11.00
MI037 .......RED LINEN MICARTA SCALES 1/4” thick ......................6.00
MI038 .......RED LINEN MICARTA PIECE 1/4” thick ......................18.95
MI039 .......RED LINEN MICARTA SCALES 3/8” thick........................8.00
MI040 .......RED LINEN MICARTA PIECE 3/8” thick.........................28.95
MI041 .......RED LINEN MICARTA BLOCK 1-1/8” thick....................10.50
MI042 .......RED LINEN MICARTA BLOCK PIECE 1-1/8” thick.........62.50
MI043 .......WHITE LINEN MICARTA SCALES 3/8” thick....................9.95
MI044 .......WHITE LINEN MICARTA PIECE 3/8” thick.....................34.95
Canvas Micarta shows a coarse pattern that resembles canvas.
CAT.NO. ITEM
PRICE
MI045...... BROWN CANVAS MICARTA SCALES 3/8” thick............ $7.95
MI046...... BROWN CANVAS MICARTA PIECES 3/8” thick............. 24.95
MI047...... GREEN CANVAS MICARTA SCALES 3/8” thick............... 7.95
MI048...... GREEN CANVAS MICARTA PIECES 3/8” thick.............. 24.95
MI051...... BLACK CANVAS MICARTA SCALES 3/8” thick................ 7.95
MI052...... BLACK CANVAS MICARTA PIECES 3/8” thick............... 24.95
FIBER GLASS/PHENOLIC LAMINATE
This material is a very dense material. Since
it is a glass fiber product, do not forget to
wear your respirator. This new material can
be sawed, drilled, sanded or polished. Ideal
for light weight folders without bolsters. This
is tough stuff that is good looking.
G10
TEX-TUFF
CAT. NO. ITEM PRICE
TXTBL01 ................ 5/32” SCALES BLACK.................................... $7.95
TXTBL02 ................ 5/32” PIECE BLACK....................................... 16.95
TXTBL03 ................ 1/4” SCALES BLACK........................................ 8.95
TXTBL04 ................ 1/4” PIECE BLACK......................................... 22.95
G10
CAT. NO.
ITEM
PRICE
G10-1S....................BLACK SCALES - 1/8”.....................................$3.95
G10-1P....................BLACK PIECES - 1/8”......................................10.95
G10-2S....................BLACKSCALES - 1/4”........................................4.95
G10-2P....................BLACK PIECES - 1/4”......................................20.95
G10-3S....................ORANGE SCALES - 1/8”................................... 6.95
G10-3P....................ORANGE PIECES - 1/8”.................................. 19.95
G10-3P....................ORANGE PIECES - 1/8”.................................. 19.95
G109S.....................ORANGE SCALES - 1/4”................................... 8.95
G109P.....................ORANGE PIECES - 1/4”.................................. 29.95
G10-4P....................ORANGE PIECES - 3/8”.................................. 39.95
G10-5S....................RED SCALES - 1/8”...........................................6.95
G10-5P....................RED PIECES - 1/8”..........................................19.95
G10-6S....................RED SCALES - 1/4”...........................................8.95
G10-6P....................RED PIECES - 1/4”..........................................29.95
G10-7S....................BLUE SCALES - 1/8”.........................................6.95
G10-7P....................BLUE PIECES - 1/8”........................................19.95
G10-8S....................BLUE SCALES - 1/4”.........................................8.95
G10-8P....................BLUE PIECES - 1/4”........................................29.95
SOFT GRIP NEOPRENE HANDLES
This is a rubber-like material made of neoprene. It has a soft warm grip, even in cold
weather. It works very well as a knife handle
that is easy to grip when wet. Simply sand
to shape with 120 grit and hand finish with
320 grit. DO NOT POLISH! It does not look
very good. Also, it seems to work best with
Linen Micarta Rods available in black and tan colors on page 4 . Handles are
available in 5/16” thickness only. Pieces are 5” x 12”. Pairs are 1-1/2” x 5”.
CAT. NO.
ITEM PRICE
NEO1P....................NEOPRENE BLACK PIECE.........................$14.95
NEO1S....................NEOPRENE BLACK SCALES..........................5.95
NEOPRENE RUBBER HANDLES
Originally this neoprene rubber was
made for horse stalls. Now it is very
popular as a handle material. The
material is non-slip and when used
as a handle material, it makes perfect
handles for fillet knives, kitchen cutlery,
and cutting competitions. Dimensions:
12” long x 5” wide x 3/4” thick.
CAT. NO.
ITEM PRICE
NEO2P....................NEOPRENE RUBBER PIECE..................... $19.95
fax (713) 461-8221
13
SYNTHETIC HANDLE MATERIALS
LAMINATED WOODS “DYMONDWOOD”
Laminated wood is manufactured to produce a very unique material, which
has the natural beauty of finished wood and still provides a high resistance
to heat and moisture. Compressed under high pressure, impregnated with
clear resin, the wood then becomes dimensionally stable. The only finishing
required is shaping, sanding, and buffing with non-coloring rouge (CAT. No.
ABR51). Scales come as a pair and are 1-1/2”W x 5”L x 3/8” thick. Pieces
are 5”W x 12”L x 3/8” thick.
Dymondwood cylinders are 1-1/2”dia. x 4-1/2” long and make great handles
for hidden tang type blades. These cylinders are also available in their
full length of 48”. The 48” cylinders make handsome and durable walking
sticks.
COLORS
AUTUMN CAMO--------------------- BLACK/GREEN/CHERRY
AGATEWOOD------------------------- NATURAL/COCOBOLO/BLUE
BLACK---------------------------------- SILVER BLACK
BRIGHT EARTH---------------------- CHERRY/WALNUT/BLACK
CAMOFLAGE------------------------- BLACK-1/GREEN-2/WALNUT-1
CHERRY-------------------------------- BRIGHT RED
COCOBOLO--------------------------- CINNAMON
DESERT CAMO---------------------- WALNUT/BROWN/WINEWOOD
EARTH---------------------------------- WINEWOOD/BROWN/BLACK
FIELD & STREAM------------------- GREEN/WALNUT/BLACK/BLUE
GREEN---------------------------------- EMERALD
KINGSNAKE-------------------------- CHERRY/YELLOW/BLACK
MAGNUM------------------------------- WINEWOOD/BLK/YEL/COCOBOLO/
WALNUT
OLYMPIC------------------------------- CHERRY/NATURAL/BLUE
RIO GRANDE-APPLEWOOD----- NATURAL/WALNUT/CHESTNUT
SPECTRUM---------------------------- BLUE/BROWN/GREEN/BROWN/CHERRY
WALNUT-------------------------------- DARK BROWN
WINEWOOD--------------------------- RED WINE COLOR
2 COLORS
CAT. NO. PRICE
DW10S................ WINEWOOD/BLACK SCALES...........................................$ 3.50
DW10P................ WINEWOOD/BLACK PIECE ............................................. 10.50
DW11S................ WALNUT/BLACK SCALES................................................. 3.50
DW11P................ WALNUT/BLACK PIECE.................................................... 10.50
DW12S................ COCOBOLO/BLACK SCALES........................................... 3.50
DW12P................ COCOBOLO/BLACK PIECE.............................................. 10.50
DW13S................ WINEWOOD/WALNUT SCALES....................................... 3.50
DW13P................ WINEWOOD/WALNUT PIECE........................................... 10.50
DW14S................ WALNUT/CHERRY SCALES............................................. 3.50
DW14P................ WALNUT/CHERRY PIECE . .............................................. 10.50
DW15S................ YELLOW/BLACK SCALES ............................................... 3.50
DW15P................ YELLOW/BLACK PIECE.................................................... 10.50
DW17S................ GREEN-1/WALNUT-2 SCALES ........................................ 3.50
DW17P................ GREEN-1/WALNUT-2 PIECE............................................. 10.50
DW18S................ COCOBOLO-2/BLUE-1 SCALES . .................................... 3.50
DW18P................ COCOBOLO-2/BLUE-1 PIECE.......................................... 10.50
DW22S................ CHERRY/BLACK - SCALES ............................................. 3.50
DW22P................ CHERRYBLACK - PIECE................................................... 10.50
DW23S................ PURPLE-2/BLACK-1 - SCALES ....................................... 3.50
DW23P................ PURPLE-2/BLACK-1 - PIECE............................................ 10.50
DW24S................ PURPLE-2/WALNUT-1 - SCALES...................................... 3.50
DW24P................ PURPLE-2/WALNUT-1 - PIECE......................................... 10.50
DW25S................ BLACK/OAK - SCALES...................................................... 3.50
DW25P................ BLACK/OAK - PIECE......................................................... 10.50
DW10-WINEWOOD/BLACK
DW11-WALNUT/BLACK
DW12-COCOBOLO/BLACK
DW13-WINEWOOD/WALNUT
DW14-WALNUT/CHERRY
DW15-YELLOW-BLACK
DW17-GREEN-1/WALNUT-2
DW18-COCOBOLO-2/BLUE-1
1 COLOR
CAT. NO. PRICE
DW102S.............. WINEWOOD SCALES.......................................................$ 3.50
DW102P.............. WINEWOOD PIECE........................................................... 10.50
DW202S.............. BLACK SCALES................................................................. 3.50
DW202P.............. BLACK PIECE.................................................................... 10.50
DW302S.............. WALNUT SCALES............................................................. 3.50
DW302P.............. WALNUT PIECE................................................................. 10.50
DW402S.............. COCOBOLO SCALES........................................................ 3.50
DW402P.............. COCOBOLO PIECE........................................................... 10.50
DW502S.............. BLUE SCALES................................................................... 3.50
DW502P.............. BLUE PIECE...................................................................... 10.50
DW602S.............. CHERRY SCALES............................................................. 3.50
DW602P.............. CHERRY PIECE................................................................. 10.50
DW702S.............. GREEN SCALES................................................................ 3.50
DW702P.............. GREEN PIECE................................................................... 10.50
DW802S.............. TURQUOISE SCALES....................................................... 3.50
DW802P.............. TURQUOISE PIECE.......................................................... 10.50
DW102-WINEWOOD
14
DW22-CHERRY/BLACK
DW23-PURPLE-2/BLACK-1
DW24-PURPLE-2/WALNUT-1
DW25-BLACK/OAK
DW202-BLACK
DW302-WALNUT
DW402-COCOBOLO
DW502-BLUE
DW602-CHERRY
DW702-GREEN
DW802-TURQUOISE
3 COLORS
CAT. NO.
PRICE
DW26S................ RIO GRANDE APPLEWOOD -SCALES.......................... $ 3.50
DW26P................ RIO GRANDE APPLEWOOD -PIECE............................... 10.50
DW27S ............... OLYMPIC - SCALES............................................................. 3.50
DW27P ............... OLYMPIC - PIECE.............................................................. 10.50
DW28S . ............. AGATEWOOD - SCALES.................................................... 3.50
DW28P . ............. AGATEWOOD - PIECE..................................................... 10.50
DW29S . ............. BLACK/OAK/CHERRY - SCALES....................................... 3.50
DW29P . ............. BLACK/OAK/CHERRY - PIECE......................................... 10.50
DW30S . ............. EARTH - SCALES................................................................ 3.50
DW30P . ............. EARTH - PIECE.................................................................. 10.50
DW32S ............... BRIGHT EARTH - SCALES................................................. 3.50
DW32P . ............. BRIGHT EARTH - PIECE................................................... 10.50
fax (713) 461-8221
3 COLORS-CONT’D
DW33S .............. CAMOFLAGE - SCALES . ...................................................$ 3.50
DW33P .............. CAMOFLAGE - PIECE......................................................... 10.50
DW34S .............. BROWN/BLUE/WALNUT - SCALES..................................... 3.50
DW34P .............. BROWN/BLUE/WALNUT - PIECE........................................ 10.50
DW35S .............. CHERRY/BLUE/WALNUT - SCALES.................................... 3.50
DW35P .............. CHERRY/BLUE/WALNUT - PIECE...................................... 10.50
DW36S .............. KINGSNAKE - SCALES........................................................ 3.50
DW36P .............. KINGSNAKE - PIECE........................................................... 10.50
DW37S .............. YELLOW/BLUE/WALNUT - SCALES.................................... 3.50
DW37P .............. YELLOW/BLUE/WALNUT - PIECE...................................... 10.50
DW38S .............. AUTUMN CAMO. - SCALES................................................. 3.50
DW38P .............. AUTUMN CAMO. - PIECE.................................................... 10.50
DW39S .............. SPECTRUM - SCALES......................................................... 3.50
DW39P .............. SPECTRUM - PIECE............................................................ 10.50
DW40S .............. MAGNUM - SCALES............................................................. 3.50
DW40P .............. MAGNUM - PIECE............................................................... 10.50
DW41S .............. FIELD & STREAM - SCALES................................................ 3.50
DW41P .............. FIELD & STREAM - PIECE.................................................. 10.50
DW42S .............. BLUE/BLACK/WALNUT - SCALES....................................... 3.50
DW42P .............. BLUE/BLACK/WALNUT - PIECE.......................................... 10.50
DW43S .............. BLUE/BLACK/OAK - SCALES............................................... 3.50
DW43P .............. BLUE/BLACK/OAK - PIECE................................................. 10.50
DW44S .............. DESERT CAMO - SCALES................................................... 3.50
DW44P .............. DESERT CAMO - PIECE..................................................... 10.50
DW26-RIO GRANDE APPLEWOOD
DW27-OLYMPIC
MULTI-COLOR CYLINDERS (1-1/2” DIA.)
4-1/2” CYLINDER
CAT. NO. 1 COLOR
PRICE
DW102C ............ WINEWOOD - CYLINDER...................................................$ 4.95
DW202C ............ BLACK - CYLINDER............................................................. 4.95
DW302C ............ WALNUT - CYLINDER......................................................... 4.95
CAT. NO. 2 COLORS
PRICE
DW11C .............. WALNUT/BLACK - CYLINDER............................................$ 4.95
DW15C .............. YELLOW/BLACK - CYLINDER............................................. 4.95
CAT. NO. 3 COLORS
PRICE
DW32C .............. BRIGHT EARTH - CYLINDER..............................................$ 4.95
DW33C .............. CAMOUFLAGE - CYLINDER............................................... 4.95
DW43C .............. BLUE/BLACK/OAK - CYLINDER.......................................... 4.95
DW41C .............. FIELD & STREAM - CYLINDER........................................... 4.95
48” CYLINDER (1-1/2” DIA.)
CAT. NO. 1 COLOR
PRICE
DW102CFL........ WINEWOOD - CYLINDER...................................................$39.50
DW202CFL........ BLACK - CYLINDER............................................................. 39.50
DW302CFL........ WALNUT - CYLINDER......................................................... 39.50
CAT. NO. 2 COLORS
PRICE
DW11CFL.......... WALNUT/BLACK - CYLINDER.............................................$39.50
DW15CFL.......... YELLOW/BLACK - CYLINDER............................................. 39.50
CAT. NO. 3 COLORS
PRICE
DW32CFL.......... BRIGHT EARTH - CYLINDER..............................................$39.50
DW33CFL.......... CAMOUFLAGE - CYLINDER............................................... 39.50
DW43CFL.......... BLUE/BLACK/OAK - CYLINDER.......................................... 39.50
DW41CFL.......... FIELD & STREAM - CYLINDER........................................... 39.50
TIGER STRIPE RESINWOOD
DW28-AGATEWOOD
DW29-BLACK/OAK/CHERRY
DW30-EARTH
DW32-BRIGHT EARTH
DW33-CAMOFLAGE
DW34-BROWN/BLUE/WALNUT
DW35-CHERRY/BLUE/WALNUT
DW36-KINGSNAKE
DW37-YELLOW/BLUE/WALNUT
DW38-AUTUMN CAMO
DW81S-WALNUT
DW84S-RIO GRANDE APPLEWOOD
DW39-SPECTRM
DW40-MAGNUM
DW82S-COCOBOLO
DW85S-BLUE LAGOON
Resinwood made from resin impregnated natural wood with beautiful depth and color, easy to work, and polish. Available only as scales
which are 3/8” thick.
CAT. NO. SINGLE COLOR
PRICE
DW80S................WINEWOOD - SCALES.....................................$11.95
DW81S ...............WALNUT - SCALES........................................... 11.95
DW82S ...............COCOBOLO - SCALES..................................... 11.95
CAT. NO. MULTI COLOR
PRICE
DW83S ............... DESERT CAMO - SCALES...............................$11.95
DW84S................ RIO GRANDE APPLEWOOD - SCALES........... 11.95
DW85S................ BLUE LAGOON - SCALES................................ 11.95
DW80S WINEWOOD
DW83S-DESERT CAMO
www.texasknife.com
DW41-FIELD & STREAM
DW43-BLUE/BLACK/OAK
DW42-BLUE/BLACK/WALNUT
DW44-DESERT CAMO
There is a lot of information on our
website including new products, items
on sale, show schedules, a downloadable catalog and much more.
fax (713) 461-8221
15
POLYESTER PEARL
This material is pure plastic (polyester), but looks like mother of pearl. It is available in black, white, and other colors. It is very decorative on a set of knives.
Knives and letter openers look elegant when a white spacer is placed under the
white poly pearl, and a contrasting spacer is placed between the white spacer
and the handle. Sands, saws and drills like other materials, and polishes with
the Jackson 51 white rouge. Scales are sold as a pair and are 1-1/2” wide x 5”
long x 3/8” thick. Pieces are 5” wide x 12” long x 3/8” thick.
CAT. NO. ITEM/SIZE
PRICE
POL02P.................. WHITE PIECE 3/8”.......................................... $30.95
POL02S.................. WHITE SCALES 3/8”.......................................... 8.95
POL04P.................. BLACK PIECE 3/8” .......................................... 30.95
POL04S.................. BLACK SCALES 3/8””......................................... 8.95
POL10P.................. BLACK CHERRY PIECE 3/8” .......................... 30.95
POL10S.................. BLACK CHERRY SCALES 3/8” . ....................... 8.95
POL11P.................. COPPER PIECE 3/8” ....................................... 30.95
POL11S.................. COPPER SCALES 3/8” ..................................... 8.95
POL14P.................. EMERALD GREEN PIECE 3/8” ....................... 30.95
POL14S.................. EMERALD GREEN SCALES 3/8” ..................... 8.95
POL17P.................. ABALONE PIECE 3/8” ..................................... 30.95
POL17S.................. ABALONE SCALES 3/8” . .................................. 8.95
POL19P.................. SILK BLUE PIECE 3/8” .................................... 30.95
POL19S.................. SILK BLUE SCALES 3/8” .................................. 8.95
POL20P.................. ANTIQUE GOLD PIECE 3/8” ........................... 30.95
POL20S.................. ANTIQUE GOLD SCALES 3/8” ......................... 8.95
POL22P.................. PURPLE PASSION PIECE 3/8” ....................... 30.95
POL22S.................. PURPLE PASSION SCALES 3/8” ..................... 8.95
POL23P.................. FEATHERED MACAW...................................... 30.95
POL23S.................. FEATHERED MACAW........................................ 8.95
POL26P.................. STAR SPANGLED BANNER PIECE 3/8”......... 30.95
POL26S.................. STAR SPANGLED BANNER SCALES 3/8”........ 8.95
POL02 - WHITE
RECONSTITUTED STONE
The size of each piece is approx. 1/4” x 1-1/2” x 5”. The reconstituted
stone is sold per piece.
CAT. NO.
COLOR
PRICE/EACH
RECON1.........Turquoise Pattern (Black Web).............................. $12.95
RECON2.........Malachite (Green).................................................. 12.95
CELLULOID MATERIAL
The size of each sheet is approx. 4” X 6”. The scales are 1-1/8” wide x
4” long x 0.143” thick.
CAT. NO.
COLOR/SIZE
PRICE/EA
CELL1....................... Tortoise Sheet (4” x 6”)................................ $14.95
CELL3.......................Abalone Sheet (4” x 6”).................................. 14.95
CELL6.......................Black Lip Snail Sheet (4” x 6”)........................ 14.95
CELLS9.....................Black Lip Snail Scales (1-1/8” x 4”).................. 7.50
CELLS10...................Abalone Scales (1-1/8” x 4”)............................ 7.50
CELLS12...................Tortoise Scales (1-1/8” x 4”)............................. 7.50
Black Lipped Snail
CELLS9
POL14 - EMERALD GREEN
Abalone
CELLS10
ALTERNATIVE IVORY
POL04 - BLACK
POL17 - ABALONE
POL10 - BLACK CHERRY
POL19 - SILK BLUE
POL11 - COPPER
POL20 - ANTIQUE GOLD
POL22 - PURPLE
POL23 - FEATHERED MACAW
Tortoise
CELLS12
The best looking alternative ivory that we’ve seen.
CAT. NO.
ITEM
SIZE
PRICE
ALIVS..................SCALES.................. 5” x 1-1/2” x 3/8”................ $28.95
ALIVB..................BLOCKS.................. 5” x 1-1/2” x 1”................... $28.95
SYNTHETIC IVORY
POL26 - STAR SPANGLED BANNER
POLYESTER PEARL CYLINDERS
Our cylinders are 1-1/2’ in dia. and come in two lengths. The full length is
23”. The other size we carry is 4-1/2”.
CAT. NO.
ITEM
SIZE/INCHES
PRICE
POL10C-4............. BLACK CHERRY............4-1/2”.....................$10.95
POL10C-22........... BLACK CHERRY............22-1/2”.....................49.95
POL04C-4............. BLACK.........................4-1/2”.......................10.95
POL04C-22........... BLACK.........................22-1/2”.....................49.95
POL02C-4............. WHITE.........................4-1/2”.......................10.95
POL02C-22........... WHITE.........................22-1/2”.....................49.95
POL19C-4............. SILK BLUE...................4-1/2”.......................10.95
POL19C-22........... SILK BLUE...................22-1/2”.....................49.95
POL22C-4............. PURPLE PASSION.........4-1/2”.......................10.95
POL22C-22........... PURPLE PASSION.........22-1/2”.....................49.95
16
Mastidon
Antique
White
Beautiful characteristic swirls and veining make it hard to tell the difference between this synthetic ivory and the real thing.
CAT. NO. ITEM
PRICE
MAS01...................... 3/16” x 1-1/4” x 3” ............................... $11.95
MAS02...................... 3/16” x 1-1/4” x 4”.................................. 17.95
MAS03...................... 1/4” x 1-1/2” x 5”.................................... 24.95
ANT01...................... 3/16” x 1-1/4” x 3”.................................. 11.95
ANT02...................... 3/16” x 1-1/4” x 4”.................................. 17.95
ANT03...................... 1/4” x 1-1/2” x 5”.................................... 24.95
WHI01...................... 3/16” x 1-1/4” x 3”.................................. 11.95
WHI02...................... 3/16” x 1-1/4” x 4”.................................. 17.95
WHI03...................... 1/4” x 1-1/2” x 5”.................................... 24.95
fax (713) 461-8221
INLACE ACRYLESTER
Acrylester is a new material that looks great and drills, sands and polishes
extremely well. It works down at the same rate as horn, bone and wood.
Each set of 3/8” scales is cut from a single block producing perfect mirror
image patterns. The size of each scale is 1-1/2”W x 5”L 3/8”T and each
block is 1-1/2”W x 5”L x 1”.
CAT. NO.
ITEM
PRICE/PR.
IN01S...................... BRONZE ORANGE SCALES......................... $9.95
IN01B...................... BRONZE ORANGE BLOCK............................. 8.95
IN06S...................... BRONZE VIOLET SCALES.............................. 9.95
IN06B...................... BRONZE VIOLET BLOCK................................ 8.95
IN07S...................... BLACK PEARL SCALES.................................. 9.95
IN07B...................... BLACK PEARL BLOCK.................................... 8.95
IN08S...................... WHITE PEARL SCALES.................................. 9.95
IN08B...................... WHITE PEARL BLOCK.................................... 8.95
IN09S...................... WHITE & BLACK PEARL SCALES.................. 9.95
IN09B...................... WHITE & BLACK PEARL BLOCK.................... 8.95
IN11S....................... BRONZE SCALES........................................... 9.95
IN11B...................... BRONZE BLOCK............................................. 8.95
IN12S...................... BLACK VIOLET SCALES................................. 9.95
IN12B...................... BLACK VIOLET BLOCK................................... 8.95
IN13S...................... RED RUSSET SCALES................................... 9.95
IN13B...................... RED RUSSET BLOCK..................................... 8.95
IN14S...................... CRUSHED MUDD SCALES............................. 9.95
IN14B...................... CRUSHED MUDD BLOCK............................... 8.95
IN15S...................... Molten Metal.............................................. 9.95
IN15B...................... Molten Metal.............................................. 8.95
INLACE LIQUID INLAY KIT
Inlace is a liquid the consistency of syrup that can be poured into a
carved, routed or drilled area, allowed to set up and then sanded and
polished. The 8 oz. kit includes everything needed to finish approx. 60
feet of 1/8” x 1/8” inlay. It comes in the colors listed below. They can be
combined with dyes and/or metal dust.
CAT. NO.
ITEM
PRICE
INKIT1..................... CLEAR........................................................... $29.95
INKIT7..................... TURQUOISE STONE.................................... 29.95
INLACE METAL DUST
This material is a finely ground holographic polyester material that can
be used with epoxies and super glue to produce a metallic inlay in wood,
bone, horn or metal.
CAT. NO.
COLOR
SIZE
PRICE
IMD1................DARK BLUE.................... 1 OZ. PKG..................... $10.95
IMD2................EMERALD GREEN......... 1 OZ. PKG..................... 10.95
IMD4................SILVER............................ 1 OZ. PKG..................... 10.95
IMD5................GOLD.............................. 1 OZ. PKG..................... 10.95
IMD6................TURQUOISE................... 1 OZ. PKG..................... 10.95
IMD7................Maroon........................ 1 OZ. PKG..................... 10.95
IMD1-DK BLUE
IMD2-EMERALD
IMD4-Silver
G10 COMPOSITE
SILVER TWILL
CARBON FIBER
High tech G10 composite. It works well on folders. The dimensions are
1/8” x 3” x 12”.
CAT. NO.
ITEM
PRICE
SD3X12................... SILVER TWILL G10....................................... $29.95
CF3X12................... CARBON FIBER G10...................................... 69.95
IMD5 Gold
IMD6-TURQUOISE
IMD7-Maroon
fax (713) 461-8221
17
WOOD HANDLE MATERIALS
NATURAL WOOD MATERIAL
All of our woods are selected for their color, texture, grain consistency or general
appearance. We stock mainly hardwoods
and as we find other suitable woods, we
will stock them. Scales are always cut
from one block and taped together to assure an exact matching pair. Scales will
be approximately 1-1/2” x 3/8” x 5” each
side. Blocks will be approximately
1-1/2” x 1-1/8” x 5”.
AMARANTH (PURPLE HEART)
Purple-violet color, dense-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOAMS............. SCALES....................... $5.95
WOAMB............. BLOCKS......................... 5.50
BOCOTE (CORDIA BARISINA)
Dark brown with yellow gold stripes and black
stripes, dense-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOBOCS........... SCALES....................... $6.50
WOBOCB........... BLOCKS......................... 6.00
BLACK PALM
Black tubes surrounded by tan. Unusual-use
sealer.
CAT. NO.
DESCRIPTION
PRICE
WOBPS.............. SCALES...................... $7.50
WOBPB.............. BLOCKS........................ 7.00
BOIS D’ARC (OSAGE ORANGE,
HEDGE, etc.)
Yellow and hard-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOBOIS............. SCALES....................... $5.50
WOBOIB............ BLOCKS......................... 5.00
EBONY (MACASSAR GOLDEN)
Black with tan irregular streaks, marble effect.
Hard and dense-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOEBMS........... SCALES....................... $7.50
WOEBMB........... BLOCKS......................... 7.00
EBONY (GABOON)
COCOBOLO
Reddish orange with dark stripes, dense, oily
and hard. Toxic to some people-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOCOS.............. SCALES.......................$6.50
WOCOB............. BLOCKS.........................6.00
Black with sometimes lighter streaks, very
dense-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOEGS.............. SCALES....................... $7.50
WOEGB.............. BLOCKS......................... 7.00
KINGWOOD (PARA)
Dark purple over black and tan streaks, hard
and dense-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOKIS............... SCALES....................... $8.50
WOKIB............... BLOCKS......................... 8.00
DESERT IRONWOOD
Nutmeg brown with bold steaks or flecks, very
dense.
CAT. NO.
DESCRIPTION
PRICE
WOARS...............SCALES..................... $16.00
WOARB...............BLOCKS....................... 16.00
DESERT IRONWOOD
EXHIBITION GRADE
There are two grades of select. Select 2 has
more pattern and grain than Select 1.
CAT. NO.
DESCRIPTION
PRICE
WOASE1S..........SCALES..................... $25.00
WOASE1B..........BLOCKS....................... 25.00
WOASE2S..........SCALES....................... 40.00
WOASE2B..........BLOCKS....................... 40.00
BLACKWOOD
Black with lighter streaks and very dense. Blocks
are 1 3/8” wide x 1” thick-use heavy sealer.
CAT. NO.
DESCRIPTION
PRICE
WOBLAS.............SCALES..................... $11.50
WOBLAB............BLOCKS....................... 10.95
WOASE1-Select 1
MAPLE (BIRDSEYE)
Tan with little eyes everywhere. Hard. Looks
best when stained dark brown-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOMABS........... SCALES....................... $5.50
WOMABB........... BLOCKS......................... 5.00
MAPLE (CANADIAN CURLY)
Tan and chatoyant. Looks best when stained
dark brown-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOMCS............. SCALES....................... $4.50
WOMCB............. BLOCKS......................... 4.00
Gloss SEALER
This product can be used to seal
wood, laminated wood, etc. It
gives a high gloss protective
coating which dries quickly and
stays clear.
BLOODWOOD
Dark orange with lighter streaks-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOBLS.............. SCALES....................... $5.50
WOBLB.............. BLOCKS......................... 5.00
WOASE2-Select 2
These are examples only. Patterns vary.
18
CAT. NO.
SIZE
PRICE
GLOSS1............. 11 OZ........................... $9.50
fax (713) 461-8221
WOOD HANDLE MATERIALS
MESQUITE, NATIVE
Brown to dark pink, dense and very hard. Texas
wood-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOMES.............. SCALES........................ $5.95
WOMEB............. BLOCKS.......................... 5.50
SNAKEWOOD
Rich looking with dark bars across reddish
brown background. This wood is very hard and
looks good. Exhibition grade.
CAT. NO.
DESCRIPTION
PRICE
WOSNS...............SCALES.....................$44.50
WOSNB...............BLOCKS.......................43.50
TULIP
Dark and medium pink with nice ivory colored
streaks, smells great when cut-dense-use sealer.
Blocks are 1” thick.
CAT. NO.
DESCRIPTION
PRICE
WOTUS.............. SCALES........................$7.50
WOTUB.............. BLOCKS..........................7.00
WESTERN WALNUT
OLIVEWOOD
Marble tan with dark streaks-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOOLS.............. SCALES.......................$6.95
WOOLB.............. BLOCKS.........................6.50
ROSEWOOD (EAST INDIAN)
Dark purple with almost black streaks. Dense
and oily-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WORES.............. SCALES.......................$5.95
WOREB.............. BLOCKS.........................5.50
ROSEWOOD (BOLIVIAN)
Some purple with tan streaks, some black with
tan, purple with yellow-variable. Dense and
hard-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WORBS.............. SCALES.......................$5.95
WORBB.............. BLOCKS.........................5.50
Curly and really nice, medium hard gunstock
wood-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOWAWS.......... SCALES...................... $6.50
WOWAWB.......... BLOCKS...................... 6.00
ZEBRA
Light tan with dark brown stripes-use
sealer.
CAT. NO.
DESCRIPTION
PRICE
WOZES.............. SCALES....................... $5.50
WOZEB.............. BLOCKS......................... 5.00
THUYA BURL
Nice rich brown with lots of eyes and a rich
cedar type odor, oily-use sealer.
CAT. NO.
DESCRIPTION
PRICE
WOTHS.............. SCALES.....................$25.00
WOTHB.............. BLOCKS.......................24.50
ZIRICOTE
Dark gray to black with lighter gray to tan layers,
scenic type usually, very hard and dense-use
sealer.
CAT. NO.
DESCRIPTION
PRICE
WOZIS................ SCALES...................... $8.50
WOZIB................ BLOCKS........................ 8.00
STABILIZED WOOD-EXHIBITION GRADE
There are lots of beautiful woods in exotic colors to choose from. Blocks are approximately
1-1/2” x 1” x 5” and scales are approx. 1-1/2” x
3/8” x 5” and are sold as a pair. These are representative samples. The burl and color may vary
because of variation in the natural wood. BLACK
ASH and MAPLE BURL (sometimes availabe in blue, red
or green) Call for color availability.
CAT. NO.
DESCRIPTION
PRICE
SW01S.....MAPLE BURL SCALES..............$29.95
SW01B.....MAPLE BURL BLOCK..................29.95
SW02S.....BOX ELDER SCALES..................29.95
SW02B.....BOX ELDER BLOCK....................29.95
SW03S.....BLACK ASH BURL SCALES.........29.95
SW03B.....BLACK ASH BURL BLOCK...........29.95
SW04S.....AMBOYNA BURL SCALES...........29.95
SW04B.....AMBOYNA BURL BLOCK.............29.95
SW05S.....REDWOOD SCALES....................29.95
SW05B.....REDWOOD BLOCK......................29.95
SW06S.....CAL. BUCKEYE SCALES.............29.95
SW06B.....CAL. BUCKEYE BLOCK...............29.95
SW07S.....SPAULTED PECAN SCALES.......29.95
SW07B.....SPAULTED PECAN BLOCK.........29.95
SW08S.....SPAULTED MAPLE BURL............29.95
SCALES
SW08B.....SPAULTED MAPLE BURL............29.95
BLOCK
MAPLE BURL-SW01
REDWOOD-SW05
BOX ELDER-SW02
CALIFORNIA BUCKEYE-SW06
BLACK ASH BURL-SW03
SPAULTED PECAN-SW07
AMBOYNA BURL-SW04
SPAULTED MAPLE BURL-SW08
fax (713) 461-8221
19
ORGANIC HANDLE MATERIALS
WATER BUFFALO HORN SCALES
WB HORN TAPER
These scales are available in 4
colors; black, black with white
streaks,honey color, and red with
black streaks.
CAT. NO.
SIZE
PRICE/PR
WBS11...................................3/8” x 1-1/2” x 5” (black)........................................................... $7.95
WBS13...................................3/8” x 1-1/2” x 5” (select with white)........................................... 9.95
WBS14...................................3/8” x 1-1/2” x 5” (red).............................................................. 12.95
WBS15...................................1/4” x 1-1/4” x 4” (honey)............................................................ 6.95
WATER BUFFALO HORN CARVED
This carved water buffalo horn scale is graduated
in color from black at one end to a honey color
on the other end. Comes as a pair.
CAT. NO.
SIZE
PRICE/PR
JBH6............... 1-1/2” X 5”..................... $13.95
WATER BUFFALO CYLINDER
This water buffalo horn taper is 5-1/2” long and
1-7/8” at the largest end.
CAT. NO.
ITEM
PRICE
WBTAP..............WB TAPER................... $14.95
WATER BUFFALO HORN JIGGED
1-1/8” diameter x 4-1/2” long cylinder. Black with
white steaks.
CAT. NO.
ITEM
PRICE/EA
WBCY1............ CYLINDER....................... $7.95
PALEO BONDTM
WATER BUFFALO STAG CARVED
This jigged water buffalo horn scale is a reddish
brown color. Comes as a pair.
CAT. NO.
SIZE
PRICE/PR
JBH4............... 1-1/2” x 5”....................... $12.95
FIRE CORAL
This water buffalo is black with light brown
streaks and comes in small and large sizes.
CAT. NO.
SIZE
PRICE/PR
WBST-SM........ 1-1/4” x 4-1/8”.................$11.95
WBST-LG........ 1-1/2” x 5”....................... 15.95
WATER BUFFALO HORN JIGGED
Honey combed water buffalo horn. Opaque, light
brown color. Comes as a pair.
CAT. NO.
SIZE
PRICE/PR
JBH5............... 1-1/4” x 4-1/4”................. $12.95
ground only)
Paleo Bond is a great substance to use on fragile
handle materials.The kit contains 5 viscosities of
bonding/filling material plus an accelerator and a
debonder. We use Paleo Bond to stabilize and
fill gaps when working with fossil ivory and other
handle materials. If you work with fossil ivory or
pearl, this kit will pay for itself in a very short
time. It is the #1 product used in museums for
preserving fossils.
CAT. NO.
SIZE
PRICE/PR
FC01................1” X 2-3/4”...................... $39.95
TIGER CORAL
CAT. NO.
ITEM
PRICE
PALEO1.............. KIT............................. $64.95
Order on-line 24 hours a day at
www. texasknife.com
Convenient, fast and easy.
20
This material is real coral. It has a rich veined
pattern. The color is a vibrant flame orange.
This material is real coral from the ocean and
has a beautiful pattern. A rich tan background
is laced with stripes in a range of dark brown
colors. Every pair is unique.
CAT. NO.
SIZE
PRICE/PR
TIG01................1” X 2-3/4”.................... $44.00
TIG02................1-1/8” X 3-1/8”................ 64.00
fax (713) 461-8221
WHITE MOTHER OF PEARL
BLACK LIPPED PEARL
In the light, the color of this pearl
changes from grays and whites to
medium greens to light reds. They
are beautifully irridescent. Scales are
2-5/8” long x 7/8” wide.
Irridescent and smooth, this
mother of pearl gives an elegant look to your knife.
CAT. NO. SIZE
PRICE/PR
MOP15........ 7/8” x 2-5/8”
$49.95
CAT. NO.
SIZE
PRICE/PR
MOP01.......................... 7/8” x 2-1/2”............................................ $ 24.95
MOP02.......................... 1” x 3”....................................................... 34.95
MOP03.......................... 1-1/8” x 3-1/8”.......................................... 44.95
MOP04.......................... 1-1/8” x 4-1/8”.......................................... 79.95
CRUSHED PEARL LAMINATE
Crushed white pearl laminate. This material is
a gold color with lots of depth. It catches the
light and sparkles. The material is stable and
easy to work.
GOLD LIPPED MOTHER OF PEARL
CAT. NO.
SIZE
PRICE/PR
MOP14........... 1” x 2-3/4” x 1/8”........... $38.95
Soft, mellow gold color that
reflects purples, pinks, yellows and greens. Absolutely
stunning!
MAMMOTH IVORY
CAT. NO.
SIZE
PRICE/PR
MOP10..........................1” x 2-5/8”................................................$ 39.95
MOP11..........................1-1/8” x 3”................................................ 49.95
SMOKEY GRAY BLACK LIPPED PEARL
This pearl is a beautiful, cool, gray color
which changes from gray to white in
the light.
CAT. NO.
SIZE
PRICE/PR
MOP12..............3/4” x 2-5/8”............... $64.95
Call us toll-free at
(888) 461-8632 if you have any
knife making questions. Our
experienced staff will be glad
to help you.
We have a large assortment of mammoth ivory colors and sizes. Our sizes
vary from 1” x 3” up to 1-3/8” x 4”. Please call us toll-free at 888-461-8632
and we will be happy to tell you what we have in stock, and give you a
description and price over the phone.
fax (713) 461-8221
21
IMPALA JIGGED BONE
WORM GROOVED BONE
Black dyed bone which is nicely
carved to look like natural impala
horn.
CAT. NO.
SIZE
PRICE/PR
PBS4............................. 4-1/4” x 1-3/8”.......................................... $18.95
IMISTAG
Imitation stag antler
jigged from cow bone.
Beautiful, amber dyed, worm
groved cow bone. It is very natural
looking. 1/8” thick.
CAT. NO.
SIZE
PRICE/PR
WGB1............................ 1-1/8” x 4” . .............................................. $10.95
WGB2............................ 1-1/2” x 5”................................................... 14.95
SHEEP HORN
Asian Ram.
CAT. NO.
ITEM
SIZE
PRICE/PR
IMI01...................SCALES......................1-1/4” x 4-1/2”.................$10.95
IMI02...................SCALES......................1-1/2” x 5”........................ 13.95
PICKED BONE
CAT. NO.
SIZE
PRICE/PR
SHP01........... 1-3/8” x 4-1/2”...........$37.95
SHP02........... 1-1/4” X 4”.................. 29.95
SHP03........... 1-1/4” X 3-1/2”............ 19.95
STAG JIGGED BONE
Made from cow shin bone and dyed
an amber color. This is an excellent
choice for folders and has a jigged pattern similar to stag. Now comes with
radius. Dimensions are 4-1/4” long x
1-1/4” wide.
CAT. NO.
PRICE/PR
PBS6.......................................$17.95
BLESBOK
Example of Red after light buffing.
Really nice looking
horns, 10” to 15” long,
open end varies, but
the average is 1-1/2” x
2”. It has good rings and
is fairly thick on large,
polished horns. Many
are nicely streaked with
lighter colors.
Example of Green after buffing.
CAT. NO.
SIZE
COLOR
PRICE/PR
PB01B................1” x 3”........................... BROWN........................... $9.95
PB01G................1” x 3”........................... GREEN.............................. 9.95
PB01R................1” x 3”........................... RED................................... 9.95
PB02B................1-1/8” x 4-1/8”............... BROWN........................... 12.95
PB02G................1-1/8” x 4-1/8”............... GREEN............................ 12.95
PB02R................1-1/8” x 4-1/8”............... RED................................. 12.95
PB02BLU...........1-1/8” x 4-1/8”............... BLUE................................ 12.95
STAG JIGGED BONE
CAT. NO.
ITEM
PRICE/EA
BLESBOK..................... VARIES....................................................$24.95
Irregular jigging looks like
stag and is dyed an orange/
brown color that is very effective and looks great.
SMOOTH BONE NATURAL COLOR
A natural color bone that has
not been dyed. This a good
bone to practice your scrimshaw
skills on.
CAT. NO.
SIZE
PRICE/PR
PBST1........... 1” x 3”.......................................................................... $9.95
PBST2........... 1-1/8” X 4-1/8”............................................................. 14.95
22
CAT. NO.
SIZE
PRICE/PR
PBNA1............1” x 3”....................................................................... $8.50
PBNA2............1-1/4” x 4-1/8”........................................................... 10.50
fax (713) 461-8221
WART HOG TUSKS
CAMEL BONE DYED
Small, medium and large. 9” -12” long. Great for making
hidden tang knives, walking sticks, etc. Each tusk is sold by
weight. Please call for price. (Price range is $25 - $50)
CAT. NO.
SIZE
PRICE
WH1..........................Small 9” to 10”................................... Call for Price
WH2..........................Medium 10-1/2” to 11-1/2”................. Call for Price
WH3..........................Large 12” and over............................ Call for Price
HIPPO TUSKS
Camel bone comes in beautiful colors and is stabilized. It is a distinctive
handle material and is durable and easy to work. We have many colors
to choose from. Minimum size is 1-1/4” x 4-1/2”.
Call for colors or order on-line and tell us what colors you prefer.
CAT. NO.
ITEM
PRICE/PR
CB02...................................1-1/4” x 4-1/2”.................................... $30.00
CAMEL BONE NATURAL
Natural Smooth camel bone scales. Very dense. Size 1-1/2” x 5”
Small, medium, and large 10”-16” long, great to slab out
for folders, full tang knives. Each tusk is sold by weight.
Please call for price. (Price range is $50 - $175)
CAT. NO.
ITEM
PRICE/PR
CB01...................................1-1/2” x 5”.......................................... $15.00
OOSIK
CAT. NO.
SIZE
PRICE
HIPPO1....................Small 10” to 12”................................. Call for Price
HIPPO2....................Medium 12-1/2” to 15”....................... Call for Price
HIPPO3....................Large 16” and over............................ Call for Price
We have specials and closeouts on our website that are not
in the catalog. There’s always
something new to see.
www.texasknife.com
Oosik is the penile bone of the walrus. It is an excellent and sought after
material for custom-made knives. Polishes like bone or stag. Comes in
many colors from light off white to dark brown, depending on age and
degree of fossilization mineral coloration. Each can be cut into spacers
or full handles depending on the need.
Call for price, size and availability.
fax (713) 461-8221
23
MISCELLANEOUS ITEMS
44/40 INSTANT GUN BLUE
You just clean the metal, wipe on
Formula 44/40, and immediately
wipe off. The blueing action is
instantaneous.
CAT. NO. ITEM
PRICE
44-40.........2 oz................$9.95
PERMA BLUE PASTE GUN BLUE
A rich, durable and long lasting finish for touch-up or complete reblueing. Will not blue
stainless steel, aluminum or
non-ferrous metals.
SUPER BLUE
A double strength blueing solution for polished steel parts
and hardened steels. This
product is the blackest blue
and penetrates the hardest
steel instantly.
CAT. NO. ITEM
PRICE
SBLUE......3 oz.................$8.95
PRESTO GUN BLUE PEN
BRASS BLACK
Fast-acting liquid used to blacken or antique brass, copper, and
bronze parts.
CAT. NO. ITEM
PRICE
BCW05......3 oz............... $8.95
WALNUT STAIN
CAT. NO.
ITEM
PRICE
GBPASTE............... 2 oz...........................$5.95
PERMA BLUE LIQUID GUN BLUE
Fast acting liquid gives a nonstreaky, even, blue-black finish
to steel. Will not blue stainless
steel, aluminum or non-ferrous
metals.
CAT. NO. ITEM
PRICE
LGB...........3 oz................$6.95
A true brown walnut color to
highlight the grain and enhance
the natural beauty of wood.
CAT. NO. ITEM
PRICE
BCW01......3 oz................$5.95
TRU-OILTM
A natural wood oil finish to protect and enhance the beauty of
fine wood.
CAT. NO. ITEM
PRICE
BCW02......3 oz............... $6.95
BLUE & RUST REMOVER
CORROSION XTM
Removes blue and rust quickly
and easily.
A multi-functional lubricant that
will stop and prevent rust and
corrosion on any metal surface. A superior lubricant and
penetrant.
CAT. NO. ITEM
PRICE
CX01.........6 oz............. $10.95
CAT. NO. ITEM
PRICE
BCW03......3 oz.............. $5.95
SEALER & FILLER
A clear sealer and filler for wood.
Seals out moisture and fills the
grain in one easy step.
CAT. NO. ITEM
PRICE
BCW04......3 oz............... $6.95
24
(This product can be
shipped ground only)
Check our website at
texasknife.com for shows
we will be attending. We
hope to see you there!
The fast and easy way to clean
up nicks and scratches. Simply
rub on with “bullet point” felt
tip.
CAT. NO. ITEM
PRICE
SBLUE2....Pen................. $5.95
COOL TOOL IITM
This is a cutting and tapping fluid. It is
non-toxic and extremely effective on
all metals, including stainless steel
and aluminum.
CAT. NO.
ITEM
PRICE
CT01..............4 oz.................. $4.95
CUTTING EDGE MAJIC
This is an oil based product which
forms a nitrogen/phosphate conversion surface on metal, providing corrosion protection, dry film
lubrication, and extended cutting
edge life. Converts to a harder
surface when dry.
CAT. NO. ITEM
PRICE
CEM1........1/2 oz................$6.95
CORROSION XTM LIQUID
The only product you will need
to maintain your knives and also
firearms. It cleans, lubricates,
and prevents rust.
CAT. NO. ITEM
PRICE
CX02.........4 oz...............$10.95
fax (713) 461-8221
MISCELLANEOUS ITEMS
SCRIMSHAW KITS
MIRACLE CLOTH
This is an all-purpose polishing cloth. It polishes and
cleans oxide off just about
anything. Use on carbon or
stainless steel, copper, nickel/
silver, brass or aluminum. Use
it totally up until there is nothing left because it works right
to the end. Leaves a protective finish. 11” x 13”
Beginner’s Kit
This beginner’s kit will get you started. Instructions and supplies to make a key chain.
CAT. NO.
PRICE
MC1........................................................ $ 4.25
FLITZTM
SENTRY TUF-CLOTH
TM
Multipurpose Dry Protectant. Cleans, prevents
rust, lubricates without oils or silicones. Marine
Tuf-Cloth (TC2) is for extreme environments and
saltwater. Tested and used by the Navy Seals.
CAT. NO.
ITEM
PRICE
TC1................TUF-CLOTH...................... $9.95
TC2................MARINE TUF-CLOTH..... $10.95
SENTRY KNIFE CARE KIT
Intermediate Kit
The Intermediate Kit contains a Bone handle
folding pocket knife, scrimshaw scribe, bottle of
India ink, step by step instructions, steel wool,
carbon paper, samples of pictures and an ink
applicatior. Everything you need to practice
your skills.
CAT. NO.
ITEM
PRICE
SCRIM1...............Beginner Kit................ $14.95
SCRIM2...............Intermediate Kit............ 39.95
This is the finest metal polish we have seen and
we have decided to market it because of your
requests. This is the best of the best. It will clean
brass, nickel/silver, stainless steel or aluminum.
Also, try it on those carbon steel blades.
CAT. NO.
ITEM
PRICE
FLITZ...................1.76 oz tube................ $9.95
GUN STOCK WAX
Lubricates, demoisturizes, prevents
rust, cleans and penetrates.
LEARNING HOW TO SCRIMSHAW
CAT. NO.
PRICE
PUB36.................................................... $12.95
SIMICHROME POLISHTM
This is a soft paste polish for chrome, silver,
aluminum, brass...virtually any metal. It gives
a brilliant shine and leaves a protective film. A
favorite of many knife makers. 1.76 oz. tube.
CAT. NO.
ITEM
PRICE
SIMI.....................1.76 oz tube................ $9.95
CAT. NO.
ITEM
PRICE
TC3................KNIFE CARE KIT............ $29.95
3MTM 5-WAY PENETRANT
by Ron Newton
The author has over 20
years experience as a
scrimshander. The book
has steps to a completed
project. It contains information about the history
of scrimshaw, laws about
ivory, safety, polishing and
working ivory, tools, getting
started, and more. Softcover, 6” x 9”, 59 pages, 20
b&w photos.
Kit consists of Tuf-Cloth, sharpener, Tuf-Glide,
lint-free brushes for hard to reach areas, and
a case.
CAT. NO.
ITEM
PRICE
3M5WP..........17 oz can........ $10.95
This is the way to pick up the shine on the GareosolTM. The 3-ounce container will wax many knife
handles and do your gunstocks as well. Just
what it takes to get a dazzling shine.
CAT. NO.
ITEM
PRICE
STW01................3 oz bottle.................... $5.95
3MTM STAINLESS STEEL
NOTE: This product can be
shipped ground only
BLUE LAYOUT FLUID SPRAY
CLEANER & POLISH
Cleans and polishes in one easy
operation. Leaves no greasy film.
Can be used on stainless steel,
chrome, aluminum, laminated
plastics, enamel and ceramic
surfaces.
CAT. NO. ITEM
PRICE
3MSSC......21 oz. can....... $10.95
NOTE: This product can
be shipped ground only
This blue fluid spray helps in laying out patterns on steel and other
metals. Also effective as an antiflux plus anti-heat paste.
CAT. NO.
ITEM
PRICE
BLUE1...........12 oz can.......$7.95
ground only
fax (713) 461-8221
25
MISCELLANEOUS ITEMS
The Tuf-Guide Pen contains a rust inhibitor and
lubricant in a 1/4 oz. size. A handy pocket clip
allows you to conveniently carry it with you.
CAT. NO.
SIZE
PRICE
TGP.......................1/4 oz......................... $5.95
Gloss SEALER
HEAT ABSORBING PASTE
Low temperature with 4% silver content, melts
at 430OF. Works best with propane torch on
brass, nickel/silver, and stainless. Comes in 1
ounce of solder (1/16” diameter and about 5’6” long), or 1 pound of solder,(1/16” diameter,
on a roll).
CAT. NO.
SIZE
PRICE
SOLDER1...........1 oz.............................. $5.50
SOLDER2...........1 lb............................... 44.95
FLUX
This product can be used to
seal wood, laminated wood, etc.
It gives a high gloss protective
coating which dries quickly and
stays clear.
(NOTE: CANNOT BE
SHIPPED BY AIR.)
BLUE MAGIC METAL POLISH
A gel that prevents heat from traveling to an
area on your blade that you don’t want to get
too hot. Water-soluble. Works well when soldering on knife guards. Wash off immediately
after use.
CAT. NO.
SIZE
PRICE
CATT...................11 oz........................... $12.95
3MTM MARINE METAL
RESTORER AND POLISH
Works with the solder above.
Comes in 4 oz.
CAT. NO. SIZE
PRICE
FLUX...........4 oz..............$8.50
CAT. NO.
SIZE
PRICE
GLOSS1............. 11 oz............................. $9.50
Instantly removes oxidation, tarnish and dirt
while it polishes any metal surface and leaves
a silicone film.
CAT. NO.
ITEM
PRICE
BLUE2.................3-1/2 oz tube................ $9.95
THERMO-TRAPTM
SILVER SOLDER
TUF-GUIDE PEN
FLUX BRUSH
Restores and polishes stainless steel, brass, bronze, copper, and chrome. Removes
surface rust, corrosion, oxidation and tarnish. A little goes a
long way.
CAT. NO. SIZE
PRICE
3MP............18 oz.........$19.95
SENTRYTM TUF-GLIDE
Powerful, dry-film rust inhibitor
and lubricant proven to outperform oils, silicones and
similar products. Use TufGlide to protect hard to reach
areas. Great for folders!
CAT. NO.
ITEM
PRICE/EA
FLUXBRUSH.......... BRUSH..................... $0.25
SOLDERING KIT
THUNDER T3 EARMUFF
CAT. NO. ITEM
SIZE
PRICE
TG1............TUF-GLIDE...... 1/2 oz........... $9.95
Precision Applicator
TG2............ TUF-GLIDE...... 8 oz.............. 24.95
Refill
This soldering kit includes 4 oz. Stay-Clean
flux, a flux brush, a cleaning brush with brass
and stainless steel bristles, 1 oz. of solder, and
instructions.
CAT. NO.
ITEM
PRICE
SK1.....................KIT.............................. $14.95
TM
Top of the line protection and comfort for noise
reduction.
CAT. NO. ITEM
PRICE
EAR1.......... THUNDER EARMUFF........ $31.95
OPTI VISOR ® WITH PLASTIC
LENSES
SAFETY SPECTACLES
MAX LITE EARPLUGS
Low pressure foam
earplugs with a noise
reduction rating (NRR)
of 30. Available in
packs of 10 only.
CAT.NO.
ITEM
PRICE
MLEP1................ PKG. OF 10................. $4.95
26
Safety spectacles provide protection against
moderate impact hazards, metal chips, particles
and sparks. Tinted lenses provide virtually 100%
protection from ultraviolet rays.
CAT. NO. ITEM
PRICE
SPEC1.......SAFETY SPECTACLES......... $7.95
CAT. NO. MAGNIFIES LENGTH
PRICE
OPDA 3.....1-3/4 times......... 14 Inches............ $34.95
OPDA 4.....2 times................ 10 Inches.............. 34.95
OPDA 5.....2-1/2 times......... 8 Inches................ 34.95
OPDA 7.....2-3/4 times......... 6 Inches................ 34.95
fax (713) 461-8221
MISCELLANEOUS ITEMS
AUTOMATIC CENTER PUNCH
LANYARDS
WTLBB
BLACK/
BLACK
WTLBG
BLACK/
GRAY
Spring tension can be adjusted for light or heavy
markings. One hand operation, no hammer
needed. Aluminum body.
CAT. NO.
ITEM
PRICE
GT77.............. CENTER PUNCH............ $19.95
EYE LOUPE
WTLBOD
\BLACK/OLIVE
DRAB
WTLBGF
BLACK/ OLIVE
DRAB WITH
FLECKS
These lanyards are made with parachute cord
and have been hand tied. Put these on your
knives so that the lanyard can assist you in getting your knife out of it’s sheath or your pocket.
Buy several. Some more uses for the lanyards
include backpack zippers, clothing zippers, luggage I.D’s, cell phone lanyards, camera lanyards
and keychains.
CAT. NO.
ITEM
PRICE
WTLBB........... BLACK/BLACK................. $7.95
WTLBG.......... BLACK/GRAY..................... 7.95
WTLBOD........ BLACK/O.D......................... 7.95
WTLBGF........ BLACK/O.D. WITH.............. 7.95
GRAY FLECKS
This is handy to have around when you need
to do some close up work. Useful to jewelers,
watch and instrument makers, engravers and
hobbyists.
CAT. NO.
ITEM
PRICE
GT527............ EYE LOUPE...................... $7.95
HEAVY DUTY WORK APRON
Supply. Get yours
today!!
texasknife.com
SCREW GAUGE
Quick way of identifying
machine screws, bolts,
wood screws, self-tapping
screws, standard size
rivets and common cotter
pin sizes up to
5/16”.
CAT. NO.
PRICE
GT714.................. $9.95
3MTM CLOTH
MAGNETIC PICKUP
Telescoping, high-power, pocket, magnetic, pickup tool. Ideal for retrieving steel and iron parts
from hard to reach work areas.
CAT. NO.
ITEM
PRICE
GT383X.........MAGNETIC PICKUP.......... $9.95
MARKING GAUGE / SCRIBE
Can be used for center lines and many other
scribing chores. Etched in 16th graduations.
Replaceable needle point.
CAT. NO. ITEM
PRICE
GT820..........MARKING GAUGE............ $16.95
texasknife.com
This work apron is heavy duty and protects
your clothing from shop dust and grime. It is
made of heavy blue denim with tie strings, and
it is hemmed. There is a handy pocket for pens,
eyeglasses, etc.
CAT. NO.
ITEM
PRICE
APRON1................. WORK APRON....... $ 9.95
MAGNIFIER LOUPE
This loupe is illuminated so that small copy or objects are easier to see and read. Power is 4X .4”
focal length. Batteries and bulb are included.
CAT. NO.
ITEM
PRICE
GT553.............MAGNIFIER LOUPE........ $9.95
High performance cloth made by 3M. It is made
out of 80% polyester and 20% nylon. Machine
washable.
CAT. NO.
PRICE
3MC.......................................................... $7.95
RENAISSANCE WAX
The best wax we’ve found that polishes, restores, and protects your fine blades and handle
material.
CAT. NO.
SIZE
PRICE
WAX1....................7 oz.......................... $29.95
WAX2....................2.25 oz....................... 18.95
fax (713) 461-8221
27
MISCELLANEOUS ITEMS
KNIFEMAKER VISE
DRILL SIZE, TAPS, GAUGE,
DECIMAL AND METRIC EQUIVALENT CHART
This complete shop
chart has all of the
proper drill sizes for
taps so that you can
drill the right size
hole for the threads
to cut properly. Also
it has the number
and metric drill sizes
and the gauge thicknesses. The chart
size is 11” X 17”. It
is printed on heavy
stock paper.
CAT. NO.
PRICE
VISE1..................................................... $99.95
CARBIDE SCRIBE
CAT. NO.
PRICE
PUB20......................................................$2.50
BOOT CLIP FOR SHEATHS
Tungsten carbide point for marking and scribing
stainless steel, ceramics, and glass. Permanent
alnice magnet for metal pick-up in hard to reach
places. Screw chuck for reversing when not in
use.
CAT. NO.
PRICE
SCRIBE2.................................................. $8.95
ELECTRONIC DIGITAL CALIPER
Gerber type. Large
are 7/8” wide and
small are 3/8” wide.
CLAMPS
KANST TWIST CLAMP
When assembling knife handles we have always
had a problem with the C-Clamp twisting the
handles and spacers when we do not want this to
happen. We have found a new type of clamp that
does not twist. When it closes, it just closes, and
the handles and spacers do not twist out. This
is why we think you will like our new c-clamps,
the Kanst Twist Clamps. We offer them in either
round or T-type handles. Size indicates the distance it will open. Made in America.
CAT. NO. SIZE
HANDLE
PRICE
KT75R.........3/4”......... ROUND............... $15.95
KT10R.........1”............ ROUND................. 16.95
KT10T.........1”............ T............................ 15.95
KT15R.........1-1/2”...... ROUND................. 17.95
KT20R.........2”............ ROUND................. 20.95
KT20T.........2”............ T............................ 18.95
PIN VISE
CAT. NO.
SIZE
QUANTITY PRICE
CLIPLG.........LARGE.......... 1...................$1.50
CLIPLG12.....LARGE.......... 12.................15.50
CLIPSM.........SMALL........... 1.....................1.25
CLIPSM12.....SMALL........... 12.................13.50
KNIFEMAKER’S SCRIBE
Double end pin vise to hold drills, reamers, and
rods. 3-3/4” long x 5/16 diameter.
CAT. NO.
PRICE
VISE3.....................................................$13.95
HAND VISE
Electronic digital caliper. Measures inside
and outside in inches and mm. Range is 6” or
150mm. LED display to 5 digits. Battery life
minimum is 12 months.
CAT. NO.
ITEM
PRICE
CALIPER1............. CALIPER................. $49.95
FILE CLEANING BRUSH
CAT. NO.
PRICE
SCRIBE1................................................ $29.95
DIGITAL MICROMETER
We use this vise all the time in our shop for
holding objects while we are grinding or sanding. It works great! 1-1/4” jaws.
CAT. NO.
ITEM
PRICE
VISE4...................... VISE...................... $26.95
DEBURRING TOOL
Made by Nichelson. Used for general cleaning
of file teeth. Finest available.
CAT. NO.
ITEM
PRICE
FCB................. KNIFE CLEANING......... $19.95
BRUSH
28
You can easily read the measurement on the
counter to .001” and then quickly read the vernier
scale on the sleeve to the .0001”.
CAT. NO.
ITEM
PRICE
MICRO1...................CALIPER................ $44.50
Supplied with two deburring blades, one for steel
and one for brass.
CAT. NO.
ITEM
PRICE
GT482............DEBURRING TOOL........ $10.95
fax (713) 461-8221
MISCELLANEOUS ITEMS
ASSORTED DIAMOND BURRS
FILE GUIDE
Complete set of 30 individual, assorted burrs. The shaft is .117 and the
length is 1-3/4”.
CAT. NO.
ITEM
PRICE
DB2GRN........................... DIAMOND BURRS.............................. $19.95
A file guide is an easy way to square up shoulders on hidden tang
knives.
ASSORTED DIAMOND BURRS
CHAIN SAW FILES
CAT. NO.
ITEM
PRICE
FG1.................................... FILE GUIDE....................................... $38.95
The new round smooth file is the fastest cutting and best finishing file to
be found.
Complete set of 30 individual, assorted burrs. The shaft is .117 and the
length is 1-3/4”.
CAT. NO.
ITEM
PRICE
DB1RED..................................DIAMOND BURRS......................... $19.95
FILE HOLDER
CAT. NO.
LENGTH
DIAMETER
PRICE
CSF18......................... 6”........................ 1/8”................................... $4.50
CSF532....................... 6”......................... 5/32”.................................. 4.50
CSF316....................... 8”......................... 3/16”.................................. 4.50
CSF14......................... 8”......................... 1/4”.................................... 4.50
SWISS PATTERN FILES SET
There are four inserts included with file
handle to fit a full range of files.
CAT. NO.
ITEM
PRICE
FH1..................... FILE HOLDER........ $5.95
1/8” SHANK FILE SET
This set includes three file shapes that fit on the GTS477 handle.
CAT. NO.
ITEM
PRICE
GTS477......................FOUR PIECE NEEDLE SET....................... $14.95
WARDING FILES
This hardened file set offers a selection of
medium size files for most of the roughin and finish work you’ll encounter as a
knifemaker.
CAT. NO. ITEM
PRICE
SFS1........... 1/8” SHANK FILE SET.....$19.50
PRECISION FILE KIT
This kit contains 6 hardened mini files with a
5-1/2” anodized aluminum handle that holds
and stores everything. It comes with a pocket
clip. Made in America.
Double cut on sides, single cut on edges. Thin rectangular shape. These
files are great for opening slots in guards.
CAT. NO.
LENGTH
DIAMETER
PRICE
WF1............................. 8”..................... Bastard.............................. $15.95
WF2............................. 8”..................... Second................................. 16.95
WF3............................. 8”..................... Smooth................................ 18.95
CHECKERING FILE
CF1
CF2
CAT. NO.
ITEM
PRICE
PFKH........................... PRECISION FILE KIT................................ $19.95
CAT. NO.
ITEM
PRICE
CF1.............................. 20 LINES PER INCH................................. $39.95
CF2.............................. 30 LINES PER INCH................................... 39.95
fax (713) 461-8221
29
SHARPENING EQUIPMENT
hONING OIL AND BENCH STONE
Nathan’s Natural Honing Oil and a soft Arkansas
Bench Stone team up to make getting a fast,
sharp edge on your knife easy.
CAT. NO. ITEM
PRICE
LSCOMBO......... Oil & Bench Stone....... $21.95
bench stone
This soft Arkansas Bench
Stone is used to achieve a
fast, sharp edge. The stone
is mounted on a wood block
for ease of use and hand
protection.
diamondstone block mate
Fits right in your knife block. The diamond and
ceramic stones sharpen and hone knives. Gives
a hollow ground edge.
CAT. NO.
ITEM
PRICE
DS1........................ Diamondstone........$15.95
Blockmate
diamondstone 2-stage
CAT. NO.
PRICE
LBS6S....................... $19.95
honing oil
Highly refined lubricant. A few
drops will lubricate all natural
and man-made bench stones
and sharpening hones. Use it
to achieve professional quality
cutting edges on all your knives
and tools.
TRISTONE
Arkansas stone (includes coarse, med., and
fine). Comes with a high quality honing oil.
CAT. NO.
PRICE
SHATRISTONE...................................... $21.95
LEATHER WHEELS
30
This DiamondStone Knife Sharpener will find a
permanent place on your countertop. It has real
diamond and ceramic mixed wheels, and does
an excellent job sharpening dull knives quickly
and conveniently.
CAT. NO.
ITEM
PRICE
DS3..................... DiamondStone........... $89.95
Electric Sharpener
tm
Diamond and ceramic stones. The ceramic
stones sharpen and hone and the white stones
give a finishing polish.
CAT. NO.
ITEM
PRICE
DS2........................Diamondstone......... $25.95
2-Stage
PROFESSIONAL KNIFE
sharpening wheel set
CAT. NO. ........... ITEM
PRICE
SHAKIT8............ 7-1/2” wheels.............. $29.95
SHAKITCOMP... Compound Kit................. 8.95
tm
POWERSTROP
CAT. NO.
PRICE
LOL01................................ $4.95
7-1/2” x 3/4” gritted wheel and 7-1/2” x 3/4”
slotted wheel. Also includes 4 oz. of white
rouge, silicone carbide regrit powder, lubricant and arbor reducer bushings.
ELECTRIC DIAMONDSTONE
SHARPENER
Leather wheel which is used to remove the wire
edge burr from stone sharpening resulting in a
keen razor-sharp edge like you’ve never seen
before.
CAT. NO.
ITEM
PRICE
PSO........................ Powerstrop............. $19.95
Supply. Get yours
today!!
texasknife.com
These leather wheels are great for sharpening
your blades.
CAT. NO.
SIZE PRICE
LW1...................6” solid . ....................... $39.95
LW2...................8” solid............................ 69.95
fax (713) 461-8221
SHARPENING EQUIPMENT
lansky rat tail sharpener
LANSKY CROCK STICK
Knife sharpening stick. Made of alumina ceramic
with a solid wood handle. Use to sharpen kitchen,
serrated and sporting knives.
CAT. NO.
PRICE
CS1........................................................ $14.95
knife care video
LANSKY SHARPENING SYSTEMS
All Lansky sharpening systems include: color
coded sharpening hones with finger grooves,
a multi-angle, flip over knife clamp, a guide rod
for each stone, specially formulated honing
oil, extra long knife clamp screws, a custom
molded storage/carrying case to hold all the
system components, and complete, easy to
follow instructions.
Lansky Deluxe Knife Sharpening
System
Lansky Folding Rat Tail tapered diamond sharpening rod, fine grit. Featuring rubber over molded
Comfort Grip handle.
CAT. NO.
PRICE
LFRTF.................................................... $14.95
DMT diamond steel
KNIFE CARE
12” rod diamond coated that never fails to
sharpen. This 600 grit steel really has bite and
will end your sharpening problems.
CAT. NO.
PRICE
DMT12...................................................$ 39.95
sharpening made easy
by Jerry Fisk
Learn how to care for and maintain your knife
properly from Jerry Fisk, a master bladesmith.
He will share his knowledge and his methods
for sharpening various types of knives correctly.
Also, he will show you how to care for your
knives so that they will retain their value. A very
informative video.
CAT. NO.
PRICE
VIDEO11................................................ $29.95
The dullest blades can be sharpened to perfection with this deluxe sharpening kit. The deluxe
system consists of 5 stones: extra coarse,
coarse, medium, fine and ultra-fine.
CAT. NO.
ITEM
PRICE
SHALK1................. Sharpening............. $39.95
system
Lansky Standard Knife Sharpening
System
LANSKY CROCKSTICK
SHARPENING MADE EASY
by Steve Bottorff
This book reveals the sharpening techniques
needed for everything from razor blades to
axes. Whether you require a sharp slicer for the
kitchen or a sturdy chopper for the field, this book
will show you how to get the edge you need.
Softcover, 96 pp.
CAT. NO.
PRICE
PUB25................................................... $ 11.95
A fast and easy knife sharpener that is easy to
use and compact enough to fit in your pocket.
Two 5” alumina, ceramic rods store inside a
hardwood box that becomes the sharpening
rod holder.
CAT. NO.
ITEM PRICE
LCS5D........... CROCKSTICK................. $13.95
This basic knife sharpening system for everyday
sharpening tasks includes a coarse hone, a
medium hone and a fine hone.
CAT. NO.
ITEM
PRICE
system
Lansky Diamond Knife Sharpening
System
ADVANCED BLADE SHARPENING TECHNIQUES
With Murray Carter
Murray Carter is a 17th Generation Yoshimoto Bladesmith who lived and worked as a
bladesmith in Japan for over 18 years. In this video you will learn advanced sharpening techniques from the master: 6 Step Sharpening Procedure • Kata-Ha Sharpening
• Tanto Blade Re-Grinding • Using Stones So They Wear Evenly • Shortcomings of
Guides & Jigs • Function of Polishing Sludge • What to
CAT. NO.
PRICE
do with Serrations • Effect of Angled Micro-Serrations
DVD18
$35.00 on Slice • Pitting on Carbon Steeled Blades. The video
includes forging footage from his shop and a shaving
demonstration.
The hardness of tool quality diamonds makes
them especially valuable for sharpening today’s
ultra-hard blade steel. The kit includes a coarse
diamond hone, a medium diamond hone and a
fine diamond hone.
CAT. NO.
ITEM
PRICE
system
fax (713) 461-8221
31
BELT SANDERS
This belt sander is highly recommended as a knifemaker’s first
machine. It is an inexpensive method to turn out much better looking knives and increase your speed while doing it. This machine
can be totally utilized by mounting it in a position where you can
work from the side, front or rear. The large platen is very useful
for flat grinding metals or wood. The platen is fully adjustable
and belt changing is quick and easy. The rubber or felt covered
wheel is mounted directly to the driver motor. Motors are sealed
for longer life.
D-5010 BELT SANDER
Belt Sander Specifications:
Belt Size
2-1/2” x 48”
Belt Speed
3300 sfm
Motor
½ H.P., 1750 rpm, 110 volt, 5.3 amps with heavy duty switch and 8 foot grounded cord. Runs very quiet.
Contact Wheel
Cast aluminum, 6-3/4” diameter X 2-7/8” wide, 1/2” arbor hole with rubber covered face.
Idler Pulley
Cast aluminum, 3” diameter crowned face with sealed high-speed double row bearings spring tensioned and adjustable for alignment.
Size Dimensions 20” x 12” x 9”
Shipping Weight 50 lbs.
(NOTE: Sanders equipped with TEBB motor which means that they
have totally enclosed motor with Ball Bearings.)
PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
D-5000 BELT SANDER WITHOUT MOTOR
This machine comes without a motor, which reduces the cost for
those of you that have a spare motor.
CAT. NO.
ITEM
PRICE
D5000R...........................D5000R BELT SANDER...................... $ 325.00
with rubber covered contact wheel
SHIPPING WEIGHT 23 lbs.
CAT.NO.
ITEM
PRICE
D5010R.......................... D-5010R BELT SANDER. ............... $425.00
With rubber covered contact
wheels. Shipping weight 50 lbs.
OTHER PARTS AVAILABLE
CAT. NO.
ITEM
PRICE
D5PLATEN..................... PLATEN ASSEMBLY.............................. $47.00
D5MOTOR...................... MOTOR ONLY........................................ 195.00
CAT. NO.
ITEM
PRICE
D5WHE01....... RUBBER COVERED.... $165.00
CONTACT WHEEL
May be purchased separately from Back Stand
Idler Assembly. Shaft 5/8” diameter and crowned
rubber covered wheel. Slight motor location adjustment could be necessary.
May be purchased separately from Back Stand
Idler Assembly. Cast aluminum with 3” diameter
crowned face mounted on shaft complete with
ball bearings.
CAT. NO.
ITEM
PRICE
D5IDL02.............IDLER PULLEY..............$59.95
Complete with idler pulley, spring tension, belt
adjustment screws and mounting bracket
CAT. NO.
ITEM
PRICE
D5IDL01 ........ BACK STAND IDLER.... $115.00
ASSEMBLY
CAT. NO.
ITEM
PRICE
D5IDL031 ....... RUBBER COVERED...... $114.00
IDLER PULLEY
MAX LITE EARPLUGS
Low pressure foam earplugs with a noise reduction rating (NRR) of 30. Available in packs
of 10 only.
CAT.NO.
ITEM
PRICE
MLEP1................ PKG. OF 10...............$4.95
32
ZAM BUFFING COMPOUND
Perfect for the Cork belt. This is a fine finishing compound. It leaves a high lusture without
a residue. Great for blade steel, stones and,
jewelry too. It will not scratch soft stones.
CAT. NO.
SIZE
PRICE
ABRZAM...........1 lB.................. $10.50
fax (713) 461-8221
BADER BELT GRINDER
CONTACT WHEELS 1/2” THROUGH 5”
Prices listed for wheels 1/2” through 5” dia. in any width
include shaft and bearings. Wheels come in either plain face
or serrated. Wheels 1/2” and 5/8” dia. are not available in a
serrated face. Wheels 1/2” through 3” dia. should not be run
at speeds in excess of 3000 SFPM. These are 2” wide.
CAT. NO.
DIA.
PRICE
BADW21......................... 1/2”................................. $ 50.00
BADW24......................... 5/8”................................... 50.00
BADW22......................... 3/4”................................... 50.00
BADW23......................... 1”...................................... 50.00
BADW25......................... 1-1/4”................................ 52.00
BADW26......................... 1-1/2”................................ 55.00
BADW27......................... 2”...................................... 62.00
BADW28......................... 3”...................................... 72.50
BADW29......................... 4”...................................... 86.50
BADW30......................... 5”..................................... 103.00
SHOWN WITH 8” CONTACT WHEEL
CONTACT WHEELS 6” THROUGH 14”
Prices for wheels 6” through 14” dia. do not include shaft
and bearing. Add $90.00 if shaft and bearings are to be
included. For use on Wilton machines specify 3/4” shaft.
Specify bore on wheels for other machine types.
PLAIN FACED 2” WIDE
CAT. NO.
DIA.
PRICE
BADW5........................... 6”...................................$ 176.00
BADW7........................... 8”..................................... 233.00
BADW9........................... 10”................................... 290.00
BADW12......................... 12”................................... 333.00
BADW14......................... 14”................................... 387.00
SERRATED 2” WIDE
CAT. NO.
DIA.
PRICE
BADW6........................... 6”...................................$ 192.00
BADW8 .......................... 8”..................................... 265.00
BADW10......................... 10”................................... 332.00
BADW13......................... 12”................................... 398.00
BADW15......................... 14”................................... 445.00
DRIVE PULLEY (Specify bore size)
CAT. NO.
DIA.
BELT SPEED
PRICE
BADDP2..............1-1/2”........... 1325......................$ 50.00
BADDP3..............2”................. 1850........................ 52.00
BADDP4..............3”................. 2750........................ 63.00
BADDP5..............4”................. 3700........................ 95.00
BADDP6..............5”................. 4600........................ 110.00
BADDP7..............6”................. 5500........................ 132.00
BADDP8..............8”................. 7400........................ 160.00
OPTIONAL ACCESSORIES
CAT. NO. ITEM
PRICE
BADPL........ 2” Wide platen w/(2) 2x2 wheels.............$ 127.00
BADRE2...... Work rest for above platen....................... 33.00
BADRE1 . ... Work rest forcontact wheel ..................... 58.00
BADHP . ..... Hinged angle plate-bench mounted .......... 165.00
BADSF1 ..... Fabricated steel floor stand...................... 320.00
BADSF2 ..... Steel floor stand with hinged . .................. 485.00
angle plate
BADCA........ Combination arm (5” x 2” serrated.............. 240.00
rubber contact wheel, platen with workrest and slack belt setup)
BADW11..... Shaft and bearings for wheels.................. 90.00
BADFTA...... Fork tip Attachment................................. 95.00
BADHDA..... Heavy Duty Arm .................................... 65.00
BADBG....... Belt guard to meet O.S.H.A. safety stds.... 125.00
GRAPHITE MATERIAL FOR FLAT PLATEN
Canvas covered with graphite. 2” wide. Used to cushion
and extend belt life. Sold by foot.
CAT. NO. ITEM
PRICE/FOOT
GR1...........2” graphite material for flat platen........... $4.00
SHOWN WITH SMALL WHEEL ARM
SHOWN WITH PLATEN
**Easier & more precise tracking **Increased adjustable belt tension **Quick change
arms - no aligning needed **No tools required to change set-ups **Accepts contact
wheels 1/2” - 14” O.D.
BADER BIII-B3 BENCH MODEL MACHINE
Complete with 1-1/2 HP, 110-220 volt, single phase, TEFC motor, HD arm, serrated
rubber 8” x 2” wheel with bearing hub and flanges, Adapter arm with Fork tip and
1/2”, 3/4”, or 1” dia. x 2” wide wheel, 6” and 3” diameter drive pulleys to yield belt
speeds of 5800 or 2800 SFPM. (Pulleys to yield other speeds from 1000 to 8000
SFPM may be substituted for standard sizes or purchased separately.)
CAT. NO. ITEM PRICE
BABM3 . .................................B3 BENCH 1-1/2 HP ........................................ $1750.00
Same as above but machine supplied with 2 HP, single phase, 110-220 volt TEFC
motor.
CAT. NO. ITEM
PRICE
BABM4 . .................................B3 BENCH 2 HP .............................................. $2020.00
VARIABLE SPEED MOTOR & CONTACT WHEEL OPTION CAT. NO. PRICE
The above machine is supplied with 1-1/2HP variable.............BADVS2...........$2500.00
speed DC motor w/Nema 12 control, 220V, 7amps The above machine is supplied with 2HP variable speed........BADVS3.............2875.00
DC motor w/Nema 12 control, 220V, 10 amps
The above machine is equipped with 10” x 2” wheel in............BADVS4.................67.00
place of the 8” x 2” wheel PRICES SUBJECT TO CHANGE WITHOUT NOTICE.
ALL UNITS ARE SHIPPED FOB NEW YORK. CALL
FOR OTHER PARTS AND PRICES.
GRINDING WHEEL
DIAMETER CHART
KNIFE GRINDING MAGNET
This chart is especially useful in determining the thickness
and width of barstock
you need to make
your knife on a given
dia. grinding wheel.
This magnet helps you hold the blade
steel to be ground against the contact
wheels or platen. It is an excellent aid
when you are surface grinding.
CAT. NO.
SIZE
PRICE
MAG1.............. 9”......................... $ 24.95
MAG2.............. 5”.......................... 19.95
CAT. NO.
PRICE
PUB23.......... $ 14.95
Front
Back
fax (713) 461-8221
33
BELTS
A/O HERMES BELTS
MICRON FILM BELTS
These Micron film belts are very thin. Water may be added while running
to aid in lubricity and life of the belt. They may be washed in warm, soapy
Comparison of microns to standard grits:
water.
MIC GRIT
9
900
15
600
MIC GRIT
30 400
40 320
MIC GRIT
60 240
80 180
MIC GRIT
100 150
2-1/2” x 48”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
9 MIC........A48MI09........... $4.95.............. A48MI09X................... $4.45
15 MIC........A48MI15............. 4.95.............. A48MI15X..................... 4.45
30 MIC........A48MI30............. 4.95.............. A48MI30X..................... 4.45
40 MIC........A48MI40............. 4.95.............. A48MI40X..................... 4.45
60 MIC........A48MI60............. 4.95.............. A48MI60X..................... 4.45
80 MIC........A48MI80............. 4.95.............. A48MI80X..................... 4.45
100 MIC........A48MI100........... 4.95.............. A48MI100X................... 4.45
2” x 72”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
9 MIC........A72MI09
$4.95............. A72MI09X................... $4.45
15 MIC........A72MI15..............4.95............. A72MI15X..................... 4.45
30 MIC........A72MI30..............4.95............. A72MI30X..................... 4.45
40 MIC........A72MI40..............4.95............. A72MI40X..................... 4.45
60 MIC........A72MI60..............4.95............. A72MI60X..................... 4.45
80 MIC........A72MI80..............4.95............. A72MI80X..................... 4.45
100 MIC........A72MI100............4.95............. A72MI100X................... 4.45
2-1/2” x 48”
GRIT
CAT. NO.
EACH
CAT. NO.
10+
120...........A48AO120............$4.45................ A48AO120X............ $3.95
220...........A48AO220.............. 4.45................ A48AO220X.............. 3.95
320...........A48AO320.............. 4.45................ A48AO320X.............. 3.95
400...........A48AO400.............. 4.45................ A48AO400X.............. 3.95
600...........A48AO600.............. 4.45................ A48AO600X.............. 3.95
800...........A48AO800.............. 4.45................ A48AO800X.............. 3.95
2” x 72”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
120...........A72AO120............$4.95................ A72AO120X............ $4.45
220...........A72AO220.............. 4.95................ A72AO220X.............. 4.45
320...........A72AO320.............. 4.95................ A72AO320X.............. 4.45
400...........A72AO400.............. 4.95................ A72AO400X.............. 4.45
600...........A72AO600.............. 4.95................ A72AO600X.............. 4.45
800...........A72AO800.............. 4.95................ A72AO800X.............. 4.45
ZIRCONIA BELTS
3M CERAMIC BELTS
2-1/2” x 48”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
36............. A48Z36.................$5.95................. A48Z36X................ $ 5.25
60............. A48Z60...................5.95................. A48Z60X................... 5.25
2” x 72”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
36............. A72Z36.................$6.95................. A72Z36X................ $ 6.45
60............. A72Z60...................6.25................. A72Z60X................... 5.75
1” x 42”
GRIT
CAT. NO.
EACH
60............. A42Z60.................$2.45
NORTON NORZON BLUE BELTS
2” x 72”
CAT. NO.
EACH
CAT. NO.
10+EACH
A72REG36.............. 9.95......................... A72REG36X.................... $9.05
A72REG60.............. 9.95......................... A72REG60X...................... 9.05
A72REG80.............. 8.95......................... A72REG80X...................... 8.15
A72REG120............ 8.95......................... A72REG120X.................... 8.15
A72REG220............ 8.95......................... A72REG220X.................... 8.15
3M TRIZAC BELTS
2” x 72”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
2000.........A72APEX6............$9.95 ............... A72APEX6X.............$9.15
1200.........A72APEX16............9.95................ A72APEX16X.............9.15
600.........A72APEX30............9.95................ A72APEX30X.............9.15
3M TRIZAC GATOR BELTS
2-1/2” x 48”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
60...........A48NN60...............$7.95................ A48NN60X.............. $7.25
80...........A48NN80.................7.95................ A48NN80X................ 7.25
120...........A48NN120...............7.50................ A48NN120X.............. 6.95
220...........A48NN220...............7.50................ A48NN220X.............. 6.95
2” x 72”
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
36...........A72NN36...............$7.95................ A72NN36X.............. $7.25
60...........A72NN60.................7.95................ A72NN60X................ 7.25
80...........A72NN80.................7.95................ A72NN80X................ 7.25
120...........A72NN120...............7.50................ A72NN120X.............. 6.95
220...........A72NN220...............7.50................ A72NN220X.............. 6.95
34
Newest technology from 3M. Excellent cutting ability and long life.
2” x 72”
GRIT
CAT. NO.
EACH
80...................................... A72GA300........................................... $9.95
120...................................... A72GA160............................................. 9.95
240...................................... A72GA65............................................... 9.95
400...................................... A72GA45............................................... 9.95
fax (713) 461-8221
BELTS AND ABRASIVES
J-FLEX (YELLOW) BELTS
2” x 72”
These soft belts work great for slackbelt contour grinding.
CAT. NO.
EACH
CAT. NO.
10+/EACH
A72JF80................$5.50........................ A72JF80X........................ $5.10
A72JF120............... 5.50......................... A72JF120X........................ 5.10
A72JF220............... 5.50......................... A72JF220X........................ 5.10
A72JF320............... 5.50......................... A72JF320X........................ 5.10
A72JF400............... 5.50......................... A72JF400X........................ 5.10
J-FLEX SCALLOPED
1” X 42” OXIDE BELTS
1” x 42”
GRIT
CAT. NO.
EACH
120.......................................... A42AO120....................................... $2.45
220.......................................... A42AO220......................................... 2.45
320.......................................... A42AO320......................................... 2.45
400.......................................... A42AO400......................................... 2.45
600.......................................... A42SC600......................................... 2.45
CORK BELTS
For polishing. Add rouge.
CAT. NO.
SIZE
EACH
A48CK..................................... 2-1/2” x 48”........................................$8.95
A72CK..................................... 2” x 72”..............................................12.95
SHOP ROLLS
Available for hand finishing and other chores. 1” x 50 yard rolls of aluminum oxide grit.
GRIT
CAT. NO.
PER/ FOOT CAT. NO.
PER/ROLL
100 .......... ASR100.......... $0.45................. ASR100R.................... $19.95
180 .......... ASR180............ 0.45................. ASR180R...................... 19.95
320 .......... ASR320............ 0.45................. ASR320R...................... 19.95
400 .......... ASR400............ 0.45................. ASR400R...................... 19.95
WET DRY SHEETS OF SANDPAPER
1” x 72” Scalloped Belts
These work great for corners.
CAT. NO.
EACH
CAT. NO.
10+/EACH
A72JFS120...........$3.95........................ A72JFS120X.................... $3.55
A72JFS220............ 3.95......................... A72JFS220X...................... 3.55
A72JFS320............ 3.95......................... A72JFS320X...................... 3.55
A72JFS400............ 3.95......................... A72JFS400X...................... 3.55
CROCUS CLOTH POLISHING BELTS
Add rouge to these belts.
CAT. NO.
SIZE
EACH
CAT. NO.
10+/EACH
A48CC.........2-1/2” x 48”.......... $4.50 .............. A48CCX.................. $4.10
A72CC.........2” x 72”.................. 4.50............... A72CCX.................... 4.10
SCOTCHBRITE BELTS (for satin finsh)
CAT. NO.
SIZE
EACH
A48SB..................................... 2-1/2” x 48”..................................... $29.95
A72SB..................................... 2” x 72”............................................. 29.95
MULTI-TOOL BELTS
MULTI-TOOL BELTS 2 x 36”
(4” contact wheel)
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
36..............A36AO40............ $3.25 .............. A36AO40X.............. $2.95
60..............A36AO60.............. 3.25............... A36AO60X................ 2.95
80..............A36AO80.............. 3.25............... A36AO80X................ 2.95
100..............A36AO100............ 2.95............... A36AO100X.............. 2.65
220..............A36AO220............ 2.95............... A36AO220X.............. 2.65
320..............A36AO320............ 2.95............... A36AO320X.............. 2.65
400..............A36AO400............ 2.95............... A36AO400X.............. 2.65
MULTI-TOOL BELTS 2 x 48”
(8” contact wheel)
GRIT
CAT. NO.
EACH
CAT. NO.
10+/EACH
36..............MT48AZ36.......... $4.95 .............. MT48Z36X............... $4.50
60..............MT48Z60............... 4.50............... MT48Z60X................. 4.10
80..............MT48Z80............... 4.50............... MT48Z80X................. 4.10
120..............MT48AO120.......... 3.25............... MT48AO120X............ 2.95
220..............MT48AO220.......... 3.25............... MT48AO220X............ 2.95
320..............MT48AO320.......... 3.25............... MT48AO320X............ 2.95
400..............MT48AO400.......... 3.25............... MT48AO400X............ 2.95
600..............MT48AO600.......... 3.25............... MT48AO600X............ 2.95
Silicon Carbide abrasive. 9” x 11” sheets. Grits may be mixed.
GRIT
CAT. NO.
PER SHEET
CAT. NO.
20+
180............AWD180.............. $0.95............... AWD180X................ $0.85
320............AWD320................ 0.95............... AWD320X.................. 0.85
400............AWD400................ 0.95............... AWD400X.................. 0.85
600............AWD600................ 0.95............... AWD600X.................. 0.85
1200............AWD1200.............. 0.95............... AWD1200X................ 0.85
1500............AWD1500.............. 0.95............... AWD1500X................ 0.85
2000............AWD2000.............. 0.95............... AWD2000X................ 0.85
DRUM SANDER MANDRELS & SANDING RINGS
These handy little sanding drums are very useful for shaping finger grooves
and getting into small radius areas on the underside of the handles and
guards. They also reduce the finishing time on handles and give a professional look and feel to your knife handles. They can be used in a drill press
or hand held electric drill. Mandrels come with a 1/4” diameter shaft.
Drum Sander Mandrels
CAT. NO.
SIZE
EACH
DM01....................... 1/2” diameter x 1” long.......... $3.95
DM02....................... 3/4” diameter x 1” long............ 4.25
DM03....................... 1” diameter x 1” long............... 4.50
DM04`...................... 1” diameter x 2” long............... 5.50
Sanding Rings
GRIT
CAT. NO.
SIZE
EACH
36..........DMSR136.................. 1/2” x 1”...............$0.45
60..........DMSR160.................. 1/2” x 1”.................0.45
150..........DMSR1150................ 1/2” x 1”.................0.45
320..........DMSR1320................ 1/2” x 1”.................0.45
36..........DMSR236.................. 3/4” x 1”.................0.45
60..........DMSR260.................. 3/4” x 1”.................0.45
150..........DMSR2150................ 3/4” x 1”.................0.45
320..........DMSR2320................ 3/4” x 1”.................0.45
36..........DMSR336.................. 1” x 1”....................0.50
60..........DMSR360.................. 1” x 1”....................0.50
150..........DMSR3150................ 1” x 1”....................0.50
320..........DMSR3320................ 1” x 1”....................0.50
36..........DMSR436.................. 1” x 2”....................0.65
60..........DMSR460.................. 1” x 2”....................0.65
150..........DMSR4150................ 1” x 2”....................0.65
320..........DMSR4320................ 1” x 2”....................0.65
fax (713) 461-8221
35
ABRASIVES, BUFFING AND POLISHING
9” SANDING RING & DURO SPRAY ADHESIVE
An excellent spray for attaching 9” x 11” sheets to
disc grinders.
CAT. NO.
PRICE
APSA-1................. $11.95
Machined steel, balanced for smooth
sanding or flat grinding. 9” diameter and
5/8” arbor hole.
CAT. NO.
ITEM
PRICE
SD01...............9” Disc...................... $89.95
SD02...............Disc Pad for 9”............. 5.95
Sanding Disc
3MAD120........Abrasive Disc............... 2.95
3MAD220........Abrasive Disc............... 2.95
More grits are available. Call for pricing.
BALDOR BUFFER
Baldor is well known as the top of the line in motors as well as
buffers and grinders. It has a full three-year warranty. These buffers come with the large diameter shafts and sealed ball bearings
and the long shafts get the buffing wheels out from the motor for
full use of the buffs. The 3/4 H.P. and smaller units come with
eight-foot conductor cord, switch and plug. All units are shipped
FOB Houston. We use Baldor buffers and consider them to be
the best. When visiting our shop we will be glad to demonstrate
them for you.
BAL114 BELT CLEANER
This cleaner is made of natural rubber. It
removes abraded material that has lodged
between the abrasive grains and dulled
the cut. It makes the belt look and perform
almost like new and it will add two to three
times the normal life to the belt.
CAT. NO.
ITEM
PRICE/EACH
ABCLG.......................BELT CLEANER – LARGE.......................... $10.95
3M SATIN FINISH WHEEL 6” SCOTCHBRITE
Plastic Bushings
This wheel is excellent for
clean up of oxidation or corrosion on metals. It leaves
a nice satin finish. The 6”
wheel comes with one set
of plastic bushings.
BAL332B
SHAFT SHP’S
CAT. NO. H.P. PHASE R.P.M. DIA.
WGT.
PRICE
BAL114.......1/4......1................ 1800...... 1/2”......... 22 lbs............ $295.00
BAL332B....3/4......1................ 1800...... 3/4”......... 57 lbs.............. 563.00
BAL407B....1.........1................ 1800...... 7/8”......... 60 lbs.............. 749.00
CAT NO.
iTEM
PRICE
ga16....................... stand......................................................... $324.00
WHEEL RAKE
CAT. NO.
ITEM
PRICE
BUF10F.........................6” DIA.,1” thick, fine.................................. $43.95
BUF10M........................6” DIA.,1” thick, medium............................. 43.95
PLASTIC BUSHINGS for 6” SATIN FINISH WHEEL
These are used for expanding a shaft from 1/2” dia. to 5/8”, 3/4”, and 1”
dia. Comes three to a set.
CAT. NO.
ITEM
PRICE
BU004.......................... Plastic Bushings......................................... $1.95
3MTMPOLISHING SHEETS
For fine finishing work from 400-8000 grit. The
sheet size is 8-1/2” x 11”.
MICRON U.S.
CAT. NO. GRADE MESH
COLOR
PRICE
3MPS1......... 1............... 8000.......... Pale Green..... $1.25
3MPS2......... 2............... 6000.......... Sea Green........ 1.25
3MPS3......... 3............... 4000.......... Pink.................. 1.25
3MPS9......... 9............... 1200.......... Blue.................. 1.25
3MPS15....... 15............. 600............ Gray................. 1.25
3MPS30....... 30............. 400............ Green............... 1.25
LB400 BRUSH ON COMPOUND
This does the job of the conventional bar compound but with less loading of your wheels and
less fling off. It is 400 grit and you brush or rub
it onto the wheel and allow to dry.
CAT. NO.
ITEM
PRICE
LB400..............8 oz............................. $8.95
36
This item is made for cleaning out the built-up material that accumullates
on your buffing wheel. These are helpful when you want to buff a light
color material just after buffing
operations on brass or steel. We
sell these rakes with the already
attached to the rake head or just
the rake head and you make
the handle and install the rake
head. The rake has 98 teeth for
cleaning deep.
CAT NO.
iTEM
PRICE
buf18..................... WHEEL RAKE................................................ $10.95
BUF17..................... WHEEL RAKE HEAD......................................... 5.95
3MTMSANDING SPONGE
The soft-back sanding sponge is 4-1/2” x 5-1/2”.
The ultrafine pad is for fine sanding, and the
microfine pad is the finest and it is for the last
coat sanding. Use dry or wet. Flexible, conformable and long lasting. Great for sanding hard
to reach areas.
CAT NO.
ITEM
EACH
3MSSUF.......................................... Ultrafine................................... $2.60
3MSSMF.......................................... Microfine.................................... 2.60
fax (713) 461-8221
BUFFING AND POLISHING
SEWN MUSLIN BUFF 3/4” THICK
JACKSON CR WHITE
Sewn in concentric rows 3/8” apart. May be
used in cutting and polishing operations.
CAT. NO.
ITEM
PRICE
BUF01..................... 4” DIA., 1/2” arbor hole.................................... $7.50
BUF02..................... 6” DIA., 1/2” arbor hole...................................... 7.95
BUF03..................... 8” DIA., 1/2” arbor hole.................................... 11.95
BUF035................... 8” DIA., 5/8” arbor hole.................................... 11.95
BUF04..................... 10” DIA., 1/2” arbor hole.................................. 18.95
BUF045................... 10” DIA., 3/4” arbor hole.................................. 18.95
LOOSE MUSLIN BUFF ( 1/4” thick)
One row of sewing around the arbor hole with
20 ply construction. Their soft and flexible
construction makes them especially useful in
finishing operations with a very fine rouge.
CAT. NO.
ITEM PRICE
BUF11..................... 6” DIA., 1/2” arbor hole.................................... $2.95
BUF05..................... 8” DIA., 1/2” arbor hole...................................... 3.95
BUF055................... 8” DIA., 5/8” arbor hole...................................... 3.95
BUF06..................... 10” DIA., 1/2” arbor hole.................................... 5.95
BUF065................... 10” DIA., 3/4” arbor hole.................................... 5.95
FLANNEL/JEWELERS BUFF ( 1” thick)
Sewn in concentric rows 1” apart. These
buffs are soft and pliable and made of cotton
flannel.
CAT. NO. ITEM
PRICE
BUF07......... 8” diameter...................... $11.95
1/2” arbor hole
BUF075.......8” diameter ....................... 11.95
5/8” arbor hole
This is a chrome rouge containing
600 grit Aluminum Oxide abrasive and
is non-coloring. An excellent rouge
for bringing stainless steel, brass,
nickel/silver, horn, laminates, and
some plastics to a bright shine. Will
remove fine scratches. Also great for
sealed woods.
CAT. NO.
SIZE PRICE
ABRCR....................................3 lb. block......................................... $8.50
JACKSON 51 WHITE
This is a non-coloring, extremely light
cutting rouge that contains 1200 to
1400 grit Alumina abrasive. A dry and
clean composition that when used
with a loose buffing wheel produces a
terrific shine on handle material after
using the CR rouge. Works very well
on horn, laminates and some plastics.
Also great for sealed woods.
CAT. NO.
SIZE PRICE
ABR51.....................................3 lb. block......................................... $8.50
JACKSON 925 DARK GREY
This is our fastest stainless steel cutting rouge. Works best at removing
belt sanding marks after final shaping
operations. Contents 220 grit Aluminum Oxide grit and works well both
with sisal or sewn muslin buffs.
CAT. NO.
SIZE PRICE
ABR925...................................3 lb. block......................................... $8.50
SISAL BUFF 8” DIAMETER (1/4” thick)
Sewn in spiral rows 1/4” apart with 7 ply sisal.
(These are used extensively for cutting operations in combination with the 925 Rouge
to quickly remove marks left by belt grinding
operations. These work best when grouped
in 2’s or 3’s for more stiffness. The RPM’s
should not exceed 2000 RPM.
CAT. NO.
ITEM
PRICE
BUF08......................... 8” DIA., 1/2” arbor hole................................ $9.95
BUF085....................... 8” DIA., 5/8” arbor hole.................................. 9.95
ZAM BUFFING COMPOUND
This is a fine finishing compound. It
leaves a high lusture without a residue.
Great for blade steel, stones and, jewelry
too. It will not scratch soft stones.
CAT. NO.
SIZE
PRICE
ABRZAM...........1 lB.................. $10.50
BUFFING COMPOUNDS
50% GREEN CHROME-(GREEN COLOR)
A green chrome rouge will remove
very fine scratches and will produce
a mirror like finish while removing
the cloudiness sometimes left by the
Aluminum Oxide rouges. Approx. 700
grit. Excellent on metals.
CAT. NO.
SIZE PRICE
ABRGC...................................2-3/4 lb. cyl....................................... $9.95
PINK NO SCRATCH ROUGE
This rouge can remove the cloudiness
from the final blade polishing
and will add some luster. It can
improve the luster of the handle
materials and not add color from the
rouge as will the GC. Works best at
1700 to 1800 RPM on a sewn buff or
loose buff.
CAT. NO.
SIZE PRICE
ABRPN40................................3 lb. cyl............................................. $9.95
fax (713) 461-8221
37
ADHESIVES
EPOXY
EPOX5SM
EPOX5LG
EPOX30SM
DEVCONTM clear setting 5 minute or 30 minute epoxy.
EPOX30LG
CAT. NO.
ITEM
SIZE
PRICE
EPOX5SM............... 5 MINUTE 2 in 1 dispenser..........................................1 oz...................... $3.95
EPOX5LG............... 5 MINUTE large size - easier to use............................9 oz...................... 11.95
EPOX30SM............. 30 MINUTE 2 in 1 dispense. Waterproof.....................1 oz........................ 3.95
EPOX30LG............. 30 MINUTE large size - easier to use. Waterproof......9 oz...................... 11.95
LOCTITE
SUPER GLUE
CYAN2
CYAN3
CYAN4
CYAN5 CYAN7
CYAN1-Insta-set accelerator.
CYAN2 and CYAN3-Insta-cure. Super thin 1-3
sec. Best for closing cracks in wood or other
repairs. Replaces Super Glue, SG1 & SG2.
CYAN4-Insta-cure + gap filling 5-15 sec.
CYAN5-Maxi-cure extra thick 10-25 sec.
CYAN7-Un-cure debonder 30-120 sec.
CAT. NO. SIZE
ITEM
PRICE
CYAN1.........2 oz........ Insta-set................ $4.99
CYAN2........ 1 oz......... Insta-cure............. 4.99
CYAN3........ 2 oz......... Insta-cure............. 8.99
CYAN4........ 1 oz......... Insta-cure + gap... 4.99
CYAN5........ 1 oz......... Maxi-cure............. 5.50
CYAN7........ 1 oz......... Un-cure................ 3.99
SUPER GLUE GEL
Gel is great for filling the large
cracks that occur in burl woods
and especially desert ironwood.
It will take on the color of the surrounding material and the crack
disappears.
CAT. NO. SIZE
PRICE
SG4............ 2 gram............$1.95
LT326
20 minute finishcure 4-1/2 oz.
epoxy
CAT. NO.
SIZE
PRICE
EPOX15.................. MED 4-1/2 oz........... $6.99
EPOX20.................. MED 4-1/2 oz............. 6.99
3MTM BLUE MASKING TAPE
LT330
CYAN1
15 minute mid-cure
4-1/2 oz. epoxy
LT7649
LT326-Speedbonder.This high performance adhesive
sets up very strong and quick.
LT330-Dependable no-mix adhesive. No measuring,
it offers high impact strength, and excellent solvent
resistance.
LT7649-Primer. Use with Speedbonder, LT326, to
clean surfaces on your knife and handle. When
speedbonder is applied, you have approx. 30-60
seconds work time before bonding begins.
CAT. NO. SIZE
PRICE
LT326..........1.69 fl. oz............................ $24.95
LT330..........0.85 fl. oz.............................. 31.95
LT7649........1.75 oz................................. 18.95
This blue masking
tape is what we use
to wrap the blades of
our knives before we
work on them. It protects the blade and
peels off easily when
you’re done.
CAT. NO.
PRICE
3MBST..................................................... $6.95
GLUE KIT
Try the Glue Kit for convenience. This kit contains everything you need to mix the glue when
you’re getting ready to put your knife handles on.
There’s two sets of gloves; 1 small, 30 minute,
2 ton epoxy; 4 stir sticks; and 2 tin trays. Order
the kit and end the hassle.
CAT. NO.
ITEM
PRICE
GLUE1................GLUE KIT..................... $4.95
EPOXY COLORANTS
SUPER GLUE
Instant drying liquid. It will fix
cracks in woods and laminates.
Has many other fill in uses.
CAT. NO. SIZE
PRICE
SG3............ 2 gram..............$1.50
38
These epoxy colorants work great for thin
spacers, file work fill-in, or fillings of porous horn or oosik-like porous materials.
Comes in 2 oz. bottles. Colors are white,
blue, yellow, black, red, or green.
CAT. NO.
COLOR
PRICE
EPOX901................... WHITE.............................. $6.95
EPOX902................... BLUE................................... 6.95
EPOX903................... YELLOW............................. 6.95
EPOX904................... BLACK................................ 6.95
EPOX905................... RED.................................... 6.95
EPOX906................... GREEN............................... 6.95
fax (713) 461-8221
BOOKS
BOOKS ON KNIVES & KNIFEMAKING
KNIFE TALK
The Art & Science of Knifemaking
by Ed Fowler
In this book, Ed Fowler talks about the theories of
design and technique and the philosophy on the
making of knives. Over 200 photos with 20 beautiful color photos of Bowies and other knives. Soft
cover, 160 pages, informative, entertaining and
just good reading.
CAT. NO.
PRICE
PUB17.......................................................$14.95
KNIFE TALK II by Ed Fowler
The High Performance Blade
Featured in this book are 65 of Ed Fowler’s columns from
BLADE Magazine on topics such as function, design, and
technique; philosophy; and forging and heat treating. He
also discusses industry standards, knife maintenance,
the sheep horn style, how to grind blades, hardening
vs. tempering, ball bearing steel, and carbon steel.
Softcover, 8-1/2” x 11”, 200 pages, 250 b&w photos,
8-page color section.
CAT. NO.
PRICE
PUB28......................................................$19.99
THE WONDER OF KNIFEMAKING
from the Publishers of Blade Magazine
Master smith Wayne Goddard is a full-time maker,
teacher and writer. Goddard works as hard to
teach knifemaking skills as he does to acquire
them. This book is a compilation of Goddard’s
columns & advice, as it has appeared in Blade
Magazine over the past several years. Softcover,
158 pages, 15 pages of knives in color.
CAT. NO.
PRICE
PUB19.....................................................$ 19.95
$50.00 KNIFE SHOP, Revised
by Wayne Goddard
Get Started Without Spending a Fortune
This is a great companion to The Wonder of
Knifemaking. Learn about selecting steel, forging,
grinding, heat treating and finishing knives, without the huge and expensive tools found in some
shops. Includes how to make wire Damascus.
Softcover, 160 pages, 250 color photos.
CAT. NO.
PRICE
PUB24.....................................................$ 19.99
KNIVES 2009 29th Annual Edition
Edited by Joe Kertzman
Blade Magazine’s publisher presents the latest edition of KNIVES 2009 filled with 1000’s of brilliant color
photos of the best knives around. Whether your tastes
run from the splendid world of inlays of precious metals
and gems, to the sleek utilitarianism of the tactical knife
world, you’ll find it in this book. There is a directory of
custom knifemaker’s in each state, knifemakers associations’ membership lists, related services and supplies.
Softcover. 8-1/4” x 10-7/8”. 312 pages.
THE PATTERN-WELDED BLADE
CAT. NO.
PRICE
PUB11-2009.............................................$27.95
by Jim Hrisoulas
Jim Hrisoulas shares his years of experience. Includes forging basics, precise patterns, and some
stunning, complex designs. This book reveals the
secrets of this ancient craft from the welding of the
starting billet to the final assembly of the complete
blade.Softcover, 120 pages.
CAT. NO.
PRICE
PUB15..................................................... $ 30.00
CUSTOM KNIFEMAKING
100 LEGENDARY KNIVES
by Tim McCreight
Here is a book with step by step details on 10
knifemaking projects. 75 photos and 100 drawings. An excellent book to start with as a new
maker. Softcover, 224 pages.
CAT. NO.
PRICE
PUB12......................................................$23.95
HOW TO MAKE KNIVES
by Bob Loveless and Richard Barney
The ultimate source on making knives. You can
make a quality knife by following these instructions. This is a book to take to the shop with you
as you work. Softcover, 182 pages, 448 B&W
photos.
CAT. NO.
PRICE
PUB03......................................................$14.99
STEP-BY-STEP KNIFEMAKING
“New Edition” by David Boye
Accomplished knifemaker includes details that
other writers often overlook. There are 169 photos
and 215 illustrations. Every phase of knife making
is covered including blade etching, sheath making
and a lesson on steels. Softcover.
CAT. NO.
PRICE
PUB04......................................................$21.95
by Gerard Pacella
is a beautiful book with 300+ color photos. This
book traces the evolution of knives from ancient
times to now. Leisure knives, professional knives,
hunting and fishing knives and combat knives
are collected together in this book that is a must
have for the knife enthusiast. It also makes a
wonderful gift. Hardcover, 144 pages, 9.5” x
11”, in full color.
CAT. NO.
PRICE
PUB30....................................................$ 29.99
HOW TO MAKE A TACTICAL KNIFE
by Don Robinson
Are you a home shop machinist, and are you interested
in making knives? Let experienced knife maker, tool
and die designer, and manufacturing engineer, Don
Robinson, show you how to make a full tang straight
knife, and a Kydex sheath from start to finish. Use the
following machine tools to create the knife: a vertical
mill, vertical band saw, belt grinder, drill press, vertical
oscillating sander, sand blaster, bead blast cabinet, and
heat treat furnace. 68 pages, 99 black and white photos,
spiral bound, 8-1/2” X 11”, softcover.
CAT. NO.
PRICE
PUB31................................................... $ 24.95
fax (713) 461-8221
39
BOOKS
MY WAY
A Toolmaker’s Method for Locating and Fitting
the Lock and Detent on a LinerlockR Folder
by Don Robinson
If you are an experienced custom made knifemaker and
have at least attempted to make one of these folders,
then this book may be of help to you. The methods
outlined in this book will guide you in making a well
made, reliable, precision knife with a solid, dependable
lock-up that can be disassembled and re-assembled
without losing alignment and fit. 42 pages, softcover,
35 black and white photos.
CAT. NO.
PRICE
PUB32.................................................... $24.95
BLADE’S GUIDE TO MAKING
KNIVES
Fusing the expertise of seven of the best knifemakers
in the world, BLADE’s Guide to Making Knives is an unrivaled how-to for blade enthusiasts! Gain professional
tips for grinding blades, crafting hunting knives, forging
pattern-welded steel into intricate designs, making folding knives, fashioning the important bolster between
knife and blade. Features detailed instructions and
250 striking color illustrations. Soft cover, 160 pages,
250 color photos.
CAT. NO.
PRICE
PUB35.....................................................$24.99
ART OF THE KNIFE
by Joe Kertzman
Every photo is exquisite! Custom creations from the
world’s top knife makers. Showcases 500 of the world’s
finest art knives made. These are the artist’s knivessculpted cutting machines embellished with scrimshaw,
engraving, gold, precious stone inlays, carving and
etching. It’s a parade of pearl, ivory, mammoth tooth,
Damascus, silver wire, exotic wood, diamonds, rubies
and more. It will definitely be an inspiration for artists
and knifemakers alike. Softcover, 254 pages.
CAT. NO.
PRICE
PUB37.....................................................$35.00
CAT. NO.
PRICE
PUB43.................................................... $27.99
BOOKS ON Scrimshaw
by Blackie Collins.
This is a 45-page book full of detailed instructions on
just about anything you might want to carve or scrimshaw. It is good on methods. Softcover.
CAT. NO.
PRICE
PUB09...................................................... $8.95
by Ron Newton
The author, Ron Newton, has over 20 years experience
as a scrimshander. He has taught at various schools
and events while continuing to perfect his techniques
and skill. His book has information about the history
of scrimshaw, laws about ivory, safety, polishing and
working ivory, tools, getting started, steps to a completed project and more. Softcover, 6” x 9”, 59 pages,
20 b&w photos.
CAT. NO.
PRICE
PUB36..................................................... $12.95
BOOKS ON SHARPENING
RAZOR EDGE SHARPENING
by John Juranitch
HANDLES & GUARDS
by Joe Keeslar
ABS Mastersmith, Joe Keeslar, is a master craftsman
in metals, wood, and leather. This book’s primary purpose is to provide students of the American Bladesmith
Society’s Handles and Guards class with guidelines for
completing the forged knife. However, the manual will
benefit any knifemaker who makes their own blades or
buys the blade blank and wants to put his own handle
material, guards, bolsters, etc. on the knife. The manual
describes handle material, bolsters, guards, collars, butt
caps, engraving and more. Soft cover, spiral bound, 84
B&W detailed illustrations, 127 pages.
CAT. NO.
PRICE
PUB39.....................................................$39.95
BLADE’S GUIDE TO KNIVES &
THEIR VALUES
edited by Steve Shackleford
If you are into buying, selling and/or trading knives, then
this is the book for you. There is pricing information for
tens of thousands of collectible knives from antiquity
to the present. The knives have been illustrated with
detailed photography and illustrations from the original
manufacturer’s catalogs.There are feature-length articles by the world’s foremost knife and cutlery experts.
Contains thousands of illustrations and descriptions to
help you identify and date virtually any knife. Black and
white illustrations, soft cover, 576 pages.
CAT. NO.
PRICE
PUB39.....................................................$39.95
This 7th Edition identificatiion and value guide will increase your expertise in identifying collectible cutlery.
It is a necessary publication if you plan to invest in
collectible knives and razors. The book contains 504
pages. There are 32 pages of beautiful color photos
of cutlery plus 472 B&W pages containing 1000’s of
photos of knives and razors plus their value and a
lot of information on knife patterns, blade types, tang
stamps, and handle materials. Also includes a DVD
containing an electronic version of the complete book.
Softcover + DVD.
HOW TO SCRIMSHAW
AND CARVE IVORY
Edited by Joe Kertzman
40
KNIVES & RAZORS
How to get the best edge possible. Answers the most
frequently asked questions. A good book with step
by step instruction on sharpening. Over 250 detailed
photographs and drawings. Softcover,143 pp.
CAT. NO.
PRICE
PUB13................................................... $ 21.95
RAZOR EDGE
World’s First Video on Sharpening
Let the champions from the Guinness Book of World
Records show you how to sharpen a blade! This video
reveals the secrets of the cutting edge. It will show you
how even a novice can do unbelievable things when
they understand the simple secrets of sharpening.
CAT. NO.
PRICE
VIDEO13................................................ $11.95
SHARPENING MADE EASY
by Steve Bottorff
This book reveals the sharpening techniques needed
for everything from razor blades to axes. Whether you
require a sharp slicer for the kitchen or a sturdy chopper
for the field, this book will show you how to get the edge
you need. Softcover, 96 pp.
CAT. NO.
PRICE
PUB25.....................................................$11.95
fax (713) 461-8221
BOOKS & DVDS
BOOKS ON WHITTLING
THE LITTLE BOOK OF WHITTLING
by Chris Lubkemann
Learn whittling from whittler, Chris Lubkemann, who
has 40 years of whittling experience. Relax and
try your hand at creating the whimsical and useful
projects that are in his book. There are 18 projects
to try. Lots of pictures and illustrations are included.
It is softcover, 6" wide x 9" high, and has 97 pages in
color. This is a fun book, and would make a nice gift
for anyone old enough to use a knife.
CAT. NO.
PRICE
PUB42.................................................... $12.95
BOOKS ON FORGING
THE MASTER BLADESMITH
by Jim Hirsoulas
The latest and finest forging book now available. In the
same style as his first publication except that this is the
advanced edition for advanced Smiths. Softcover with
286 pages and full size. 8-1/2” x 11”.
CAT. NO.
PRICE
PUB08.................................................... $46.00
THE HAND FORGED KNIFE
by Karl Schroen
An introduction to hot working steel. All the skills you
need to forge, harden and temper 12 modern tool steels
used today. It has136 pages of really good information
on forging knives. It has many good and useful tips.
CAT. NO.
PRICE
PUB06.....................................................$16.95
FILEWORKING
by Dwayne Dushane
Fileworking master, Dwayne Dushane, takes
you step by step through 3 different designs of
fileworking: the S pattern, the Vine pattern and the
Rope pattern. 2 hours and 13 minutes.
CAT. NO.
ITEM
PRICE
DVD3....................... DVD......................... $40.00
SCULPTING
by David Broadwell
Custom knife maker, David Broadwell, shows you
techniques he has used to create some of his
exotic knives. He takes you step by step through
some of the most common aspects of sculpting
and texturing a blade. 1 hr. and 59 min.)
CAT. NO.
ITEM
PRICE
DVD4....................... DVD......................... $35.00
MAKING A SUB-HILT FIGHTER
with S.R. Johnson
Learn how to make a sub-hilt fighter from scratch. Join
Steve Johnson as he teaches you how to create and
customize your own sub-hilt fighter. In this video you
are taken step-by-step through the entire process from a
piece of bar stock to a piece of art. Pictorials are included
to give you a feel for what you can accomplish. Two disc
set, color, 3 hr. and 48 min.
CAT. NO.
ITEM
PRICE
DVD5....................... DVD......................... $45.00
THE COMPLETE BLADESMITH
KYDEX BASICS
This is the complete book on forging. Questions you
have not thought of asking are answered for you. How
to do the things you have always wanted to do with a
forge, but did not have the nerve to try. Many new blade
patterns, Damascus Steel, how to use and make tools.
Hard cover with 100 illustrations and 58 photos for a
total of 179 pages and full size 8-1/2” x 11”.
The fundamentals of Kydex knife sheath and gun holster
making is brought to you by expert makers, Darrel Ralph
and Ryan Bailey. They will guide you through the process
of designing, forming and finishing your own custom
knife sheaths and gun holsters. DVD-color-approx.
time-60 min.
by Jim Hirsoulas
CAT. NO.
PRICE
PUB07.................................................... $44.95
VIDEOS
THE FINE ART OF HOLLOW
GRINDING
by Johnny Stout
Watch as legendary Texas knifemaker, Johnny Stout,
walks you through the finer points of hollow grinding.
Johnny grinds both fixed blades and folders. Great for
the beginner or professional knife maker. 1 hour and
29 minutes.
CAT. NO.
ITEM
PRICE
DVD1....................... DVD.......................... $35.00
CUSTOM KNIFE SHEATHS
by Chuck Burrows
Chuck Burrows of Wild Rose Trading Company takes
you step by step through making a Hunter and a Mexican
Loop sheath. learn expert techniques on stamping and
carving. This DVD is packed with information on custom
knife sheath making. 3 hours and 55 minutes.
CAT. NO.
ITEM
PRICE
DVD2....................... DVD......................... $45.00
featuring Darrel Ralph & Ryan Bailey
CAT. NO.
ITEM
PRICE
DVD6.................. DVD.............................. $29.95
PARACORD WRAP
featuring Phil Hine, Instructor
Learn the secrets of basic paracord wrapping techniques
with Phil Hine. Watch and learn as Phil demonstrates two
of his favorite paracord wrapping styles, the “Shoestring”
and the “Twist”. Phil steps you through the basics of the
cord tying procedures of these outstanding wraps. DVD,
Color. Approx. 45 min.
CAT. NO.
ITEM
PRICE
DVD7....................... DVD......................... $24.95
FIXED BLADE KIT ASSEMBLY
featuring Darrel Ralph
Follow the world’s leading custom knife and modern knife
kit designer, Darrel Ralph, as he guides you through the
step-by-step process of building your own fixed blade kit.
Darrel will take you through the steps of assembling the
Delta 5, a dual bolster fixed blade with handles, using hidden bolt handle pins.DVD-Color-Approx. 60 min.
CAT. NO.
ITEM
PRICE
DVD8....................... DVD...........................$29.95
fax (713) 461-8221
41
VIDEOS and DVDS
BASIC DAMASCUS
with Ed Caffrey, A.B.S. Mastersmith
Watch as ABS Mastersmith Ed Caffrey shows you how to
get solid results with your Damascus billets. He will show
you processes that will allow you to make one good blade
after another. Includes stock removal methods and tips
on etching. Ed shows you refined techniques for creating
bird’s eye pattern, a ladder pattern, a twist pattern, and a
random pattern. Color, 83 min.
CAT. NO.
ITEM
PRICE
DVD9....................... DVD............................ $35.00
THE WIRE DAMASCUS HUNTING
KNIFE (How to do it)
by Wayne Goddard
How to make the wire damascus hunting knife. Weld the
billet, forge it to shape, grind and heat treat the blade.
Finish grind and etch, attach the handle, sharpen and
enjoy.
CAT. NO.
PRICE
DVD12........................................................$29.95
KNIFE CARE
with Jerry Fisk
MOSAIC DAMASCUS
with Ed Caffrey, ABS Mastersmith
In this video, ABS Mastersmith, Ed Caffrey will show you
some of the most common Mosaic Damascus patterns.
The information is easy to understand, and will allow you
to take the “next logical step” towards producing your own
Mosaic Damascus. Ed covers how to create a radial pattern, a basket weave pattern, a jelly roll pattern, and how
to do an “accordion” fold. DVD-Color-1hr.49 min.
Learn how to properly care for and maintain your knife
from Jerry Fisk, a master bladesmith. He will share his
knowledge and his methods for sharpening various types
of knives correctly. Also, he will show you how to care
for your knives so that they will retain their value. A very
informative video.
CAT. NO.
ITEM
PRICE
VIDEO11................. VIDEO...................... $29.95
CAT. NO.
ITEM
PRICE
DVD10..................... DVD............................ $45.00
Japanese Cord Wrapping
with Kirby Lambert
LOVELESS LEGEND
by R.W. Loveless
An informative and intertaining narration by Mr. Loveless
takes you through all the steps in the making of one of his
most popular models. 1hr. 35min.
CAT. NO.
ITEM
PRICE
VIDEO2....................VIDEO........................ $21.95
Learn the secrets of Japanese Cord Wrapping with a
professional custom knife maker, Kirby Lambert. Follow
Kirby’s expert guidance as you go from start to finish
through the amazing process of Japanese cord-wrapping
technique, learning through hands-on demonstration and
detailed explanation. This video is a must-see for anyone
aspiring to recreate the beauty and versatility of one of
the world’s oldest handle wrapping techniques. (DVD
Color-Approximately 60 minutes)
CAT. NO.
ITEM
PRICE
DVD14...................... DVD......................... $29.95
FORGING DAMASCUS
by Jim Hrisoulas
This is a two tape series which shows
how to forge Damascus steel and shape
blades by showing you visually the
subtleties that are hard to demonstrate
in a book.
CAT. NO.
ITEM
PRICE
VIDEO3.........Part 1 & 2...... $29.95
THE DESIGN, CONSTRUCTION &
FUNCTION OF THE USING KNIFE
(52100 STEEL); BEARING TO BLADE
TO FINISH KNIFE
with Ed Fowler
THE ELECTROLYSIS OF METALWORKING, ANODIZING, ELECTROETCHING, AND GOLD PLATING
with Bob Warner
Watch as custom knifemaker and toolmaker Bob Warner
teaches you the secrets to building your own anodizer,
electro-etcher, and gold plating machine. With this video,
you will gain the knowledge to enhance and color your
own titanium used commonly for bolsters and liners. Embellish your work by putting multiple colors on one piece
of metal. Also, make custom stencils and do your own
electro-etching. And finally learn how to put gold plating
on copper for your exciting gold wire inlays.
CAT. NO.
ITEM
PRICE
DVD15...................... DVD......................... $40.00
122 minutes of information on knifemaking techniques.
CAT. NO.
ITEM
PRICE
VIDEO4................ VIDEO............................ $45.00
RECREATIONAL KNIFE
THROWING
with Ray Cover
by John Bailey
John Bailey has over 40 years of knife throwing experience. He will show you how to throw everything from
bayonets to scissors. Advanced techniques. 39 minutes
of entertainment.
CAT. NO.
ITEM
PRICE
DVD11...................DVD............................... $23.00
42
AN INTRODUCTION TO KNIFE
ENGRAVING
Engraving is a favorite way to embellish any personal
item such as a knife, gun, or writing pen. It gives the item
a distinctive look and feel that adds a uniquely personal
touch. 2 disc set.
CAT. NO.
ITEM
PRICE
DVD16..................... DVD........................... $40.00
fax (713) 461-8221
DVDS
INTRODUCTION TO KNIFE
SHARPENING
THE LOCKING LINER
with Don Robinson
The Locking Liner 2-disc DVD by Don Robinson shows
you how to make your own Barlow style locking liner knife.
The video is almost four hours long. Instructions on the
video include everything you need to know to make your
knife. You are shown from start to finish how to transform
the raw materials into cutlery art. A template for the knife is
included. Length: 3 hr. and 46 min., color, full screen.
with Murray Carter
Murray Carter worked in Japan for over 18 years as a rural
village bladesmith. He has the unique distinction of becoming the 17th Generation Yoshimoto Bladesmith. He has
made over 12,000 knives and hand sharpened more than
40,000 blades of all shapes and sizes. He lives in Oregon
now and is rated a Master Bladesmith by ABS, In this
video, Murray Carter shows you what you need to know in
order to become an expert in sharpening knives.
CAT. NO.
ITEM
PRICE
DVD22..................... DVD........................... $45.00
CAT. NO.
ITEM
PRICE
DVD17..................... DVD........................... $45.00
FLAT GRINDING
With Harvey Dean
A.B.S. Mastersmith
ADVANCED BLADE SHARPENING
TECHNIQUES
The most popular grind for working knives is the Flat
Ground blade. Harvey Dean will demonstrate and explain
his methods of flat grinding perfect blades. Learn the
geometry, checkpoints, and repair methods needed to
grind flat blades with remarkable success.Harvey Dean,
A.B.S. Mastersmith, has been handcrafting knives since
1981. He has taught knifemaking through seminars and
college courses, and now you can learn his methods in
your own home with this DVD. Length: 1 hr. and 48 min.,
color, full screen format.
With Murray Carter
Murray Carter is a 17th Generation Yoshimoto Bladesmith
who lived and worked as a bladesmith in Japan for over
18 years. In this video you will learn advanced sharpening
techniques from the master: 6 Step Sharpening Procedure
• Kata-Ha Sharpening • Tanto Blade Re-Grinding • Using
Stones So They Wear Evenly • Shortcomings of Guides
& Jigs • Function of Polishing Sludge • What to do with
Serrations • Effect of Angled Micro-Serrations on Slice • Pitting on Carbon Steeled Blades. The video includes forging
footage from his shop and a shaving demonstration.
CAT. NO.ITEM
PRICE
DVD23..................... DVD........................... $35.00
CAT. NO.
ITEM
PRICE
DVD18..................... DVD........................... $35.00
THE QUILLION OF QUALITY
With Jerome Anders
A.B.S. Mastersmith
BASIC BLADESMITHING
If you are interested in making the Quillion dagger as
required for the ranking of A.B.S. Mastersmith, then this
is the DVD for you. American Bladesmith society Mastersmith, Jerome Anders, teaches you how to make the
dagger. The Quillion dagger is the toughest challenge
the American Bladesmith Society has for impeccable
workmanship. Jerome Anders goes above and beyond
the requirements and explains each step in detail. This
dagger won Best Art Knife at the Ohio Valley Knife Show
just two weeks after its conception and the filming of this
video. In this video you will learn: the proper way to flute
handles, the forming of the quills and how to make them
equal on each side, and the fit up and finishing techniques
that will help you to pass your A.B.S. Quillion test with
confidence. Two disc set, length: 3 hrs. and 6 minutes,
color, full screen format.
With Ed Caffrey
A.B.S. Mastersmith
“The Montana Bladesmith”
Join ABS Mastersmith Ed Caffrey at the forge as he walks
you through Basic Bladesmithing. If you are a beginner,
this video will help you develop the foundation necessary
for forging your own blades. If you are already familiar
with the forge, Ed’s methods will help you enhance the
quality of your work.
CAT. NO.
ITEM
PRICE
DVD19..................... DVD........................... $35.00
FORGE WELDING CABLE DAMASCUS &
STRIPED CABLE DAMASCUS
CAT. NO.
ITEM
PRICE
DVD24................. DVD (2 DISC SET)........ $45.00
with Gene Osborn (2 Disc Set)
Watch as Gene Osborn walks you step by step through
the process of forge welding cable Damascus. He will
show you techniques that will allow you to “work smarter,
not harder”. On disc two, Gene reveals his secrets on
forge welding striped cable Damascus. You will learn the
secrets needed to turn an ordinary piece of steel cable into
a striking Damascus billet or blade. DVD is in color with a
running time of 123 minutes, English, no subtitles.
AUTOMATIC CONVERSION
featuring Jonathan Musick
Follow along as Jonathan Musick shows you the secrets
to automatic knife conversion. He converts an over-thecounter manual button lock knife into a coil spring fired,
one hand opener automatic. Color, approximately 40
minutes.
CAT. NO.
PRICE
DVD20........................................................ $45.00
CAT. NO.
PRICE
DVD25........................................................$24.95
MAKING A D-GUARD BOWIE
with Harvey Dean
A.B.S. Mastersmith (2 Disc Set)
The D-Guard Bowie is a legendary battle weapon, part
sword, part knife. The powerfully balanced design makes
it a favorite tool for many tasks. Harvey Dean has revealed his secrets and improvements for making a more
secure and artful D-Guard Bowie in this 2 disc video. The
more you watch this video, the more your knifemaking
skills will improve. Harvey Dean is one of the most sought
after teachers in this craft and he enjoys the craft as much
as he enjoys teaching. Color, 3 hr. 13 min., full screen
format, 2 discs, English, no subtitles.
CAT. NO.
PRICE
DVD21......................................................$45.00
THE DDR3TM BUTTON LOCK FOLDER KIT
See page 50 for
more information
on this blade kit.
Blade Length: 3.60” Closed Length: 4.50” Overall Length: 8.10”
The kit comes standard with a 600 grit satin finished blade and pre-radiused
bolsters; stainless hardware and liners for a high-strength precision fit;
hardened AUS8 blade steel that is cryo tempered.
CAT. NO. ITEM
PRICE
BLDDR3BL................. (1) Base Parts Kit (no handle scales)....................................$56.95/ea
BLDDR3BL-5............. (5 pack special) - Base parts Kits (no handle scales)...............52.95/ea
fax (713) 461-8221
43
SHEATHS
LEATHER KNIFE SHEATHS
These sheaths are precision sewn and made of very high grade 8/9 oz. cowhide with a welt in the seam so the blade does not cut the threads.
Soft enough so that most handles will slide in for that final water fitting. Some sheaths are constructed for particular blades, but will fit many more.
Compare the blade lengths to the ones listed for the sheaths. Snaps are included, but not attached to the strap.
SHEATHs 1, 2, 3, 4, 5
SHEATHs 6, 7, 8, 9, 10
sheath 14
SHEATH 23
1
2
3
4
5
6
CAT. # ITEM PRICE
SHEATH #1 – Fits the filet
she1
$15.95
blade BLSFS7 and BL070
(blade length of 6-1/2” to 7”)
SHEATH #2 - Fits the blade 15.95
she2
BL411, BL412, BL483, BL545
and many more. Opening is
7-3/4” deep and 1-7/8” wide.
SHEATH #3 - Fits the BL409, 15.95
she3
BL410, BL482, and BL545.
Opening is 6-3/4” deep and
1-3/4” wide.
SHEATH #4 - Fits the blade
she4
15.95
BL422, BL431, BL465, BL475,
BL481 and BL706.
SHEATH #5 - Fits the blade
she5
15.95
BL170. Opening is 5-1/4” deep
and 1-3/8” wide.
SHEATHs 18, 19, 20, 21, 22
7
8
9
10
CAT. # ITEM PRICE
she6 SHEATH #6 – Fits narrow
$15.95
blade. Opening is 5-3/4” deep
and 1” wide.
15.95
she7 SHEATH #7 - Snap across.
Fits blades 4” long like the the
BL466.
15.95
Fits blades 5” long like the
BL156. Opening is 5-1/4”
deep and 1-3/8” wide.
15.95
Fits blades 6” long like the
BL160. Opening is 6-1/4”
deep and 1-1/2” wide.
she10 SHEATH #10 - Fits blade
15.95
BL528.
CAT. # ITEM PRICE
she14 SHEATH #14 – Fits BL471
$29.95
and other similar blades.
Snap around or snap over the
guard models available.
15.95
she23 SHEATH #23 - Fits blade
BL478. It has a snap over
flap.
sheath FOR TEXAS FILLET
This is the sheath that fits the BL707C. Inside
opening is 1-3/8” x 13-1/2”.
CAT. #
SHE-TEX
ITEM
SHEATH FOR
BL707C
PRICE
$17.95
sheath 24
SHEATHs 11, 12, 13, 15, 17, 16
This sheath fits boot blade, BL459, and has a
clip for your convenience.
CAT. #
ITEM
PRICE
SHE24
SHEATH FOR
$16.95
BL459
18
19
20
21
22
11
CAT. #
she11
CAT. #
she18
she19
she20
she21
she22
ITEM PRICE
$15.95
SHEATH #18 - Fits blade
BL530.
15.95
BL546.
15.95
SHEATH #20 - Fits BL537.
15.95
SHEATH #21 - Pouch type
sheath. Width is 1-3/4” and
depth is 5-1/2”.
SHEATH #22 - Fits folder knife. 15.95
she12
she13
she15
she17
SHE16
Width is 2” and depth is 5”. Sheath has a fold
over flap and comes in a natural color. Snap
included, but not attached.
44
12
13
15
17
16
ITEM PRICE
SHEATH #11 – Fits BL450 $15.95
and many more. Opening is
1-3/4” wide and 7-1/4” deep.
15.95
BL447
15.95
15.95
SHEATH #17 - Fits BL060
15.95
SHEATH #16 - Fits BL706,
15.95
BL475, BL431 and others.
UNIVERSAL TACTICAL SHEATH
Universal tactical sheath fully adaptable to
M.O.L.L.E./P.A.L.S. vests. Inner plastic sheath
fits blade sizes up to 1-3/4” x 8-1/4” x 3/16”. Overall sheath size is 15” x 2-3/4” and comes with a
storage pouch and numerous belcro straps. It
can be worn on belt or combat vest.
CAT. #
ITEM
PRICE
SHE26
Sheath
$15.95
sheath 25
Fits hatchet, BLCHO1. The dimensions for the inside opening of
the sheath are 4-1/4” at the top and 1-1/2” at the bottom for the
handle.
CAT. #
ITEM
PRICE
SHE25
Sheath for BLCH01
$19.95
fax (713) 461-8221
LEATHER AND SHEATH MAKING SUPPLIES
LEATHER
STINGRAY SKIN
Black stingray skin.
Leather shoulder
CAT. NO.
ITEM
PRICE
LS1.......................... 6-7 oz................. $8.95 FT.
LS2.......................... 8-9 oz................... 9.95 FT.
LEATHER RING SPACER
Approximately 1/8”
thick x 1-1/4” x 1”
oval with a small rectangular hole in the
center to slide over
the tang.
CAT. NO.
PRICE
LR1..................................................... $0.25 EA
LEATHER BALM
CAT. NO.
SIZE
PRICE
STING2........................... 16” long, 8” wide....................................$44.95
STING3........................... 12” long, 7” wide......................................34.95
EDGE KOTE
LEATHER DYE
For color coating leather
edges. Black.
CAT. NO. ITEM
PRICE
FEKBL..........4 oz................ .$8.50
LEATHERCRAFT CEMENT
The best all-purpose
cement you can buy.
Flexible, non-flammable adhesive. Waterproof. Quickly and
permanently bonds
leather and kydex.
Leather balm
with atom wax.
This balm will
help you clean,
preserve, polish and restore
smooth leather
articles.
CAT. NO.
ITEM
PRICE
TBCC....................... 4 oz.......................... $6.95
CAT. NO.
ITEM
PRICE
FLB.......................... 4 oz.......................... $5.95
LEATHER WATER BASED DYES
CAT. NO.
ITEM
PRICE
PL72........................ PUNCH PLIER....... $12.95
NEATSFOOT OIL
Neatsfoot oil is for finishing
your sheath after water
shaping the leather to fit
your knife. It is excellent for
softening and darkening
leather. 4 ounce bottle.
CAT. NO.
SIZE
PRICE
NEAT1............4 oz..............$2.95
CAT. NO.
ITEM
PRICE
FLDBL.................USMC Black.............. $24.95
FLDLB.................Light Brown................. 24.95
LEATHER SHEEN
Shines and conditions
leather with a flexible
wax finish.
CAT. NO...... ITEM
PRICE
FLSA.......... 12 oz.........$12.95
REVOLVING PUNCH PLIER
For making round holes in leather,
plastic and similar material.
Leather dye. Quart
container. Comes
in USMC Black
and Light Brown.
note: This product can be
shipped ground only.
ALL IN ONE LEATHER STAIN
Eco-Flo Leather dye in Coal Black.
Water based product line for leather
that is enviromentally friendly.
CAT. NO.
ITEM
PRICE
FPOST................... Canyon Tan................ $7.95
(replaces Fiebing’s Oil Dye, Saddle Tan.)
FPOBL.................. CoalBlack..................... 7.95
(replaces Fiebing’s Oil Dye, Black
FPODB.................. Dark Cocoa Brown....... 7.95
(replaces Fiebing’s Oil Dye, Dark Brown.)
Eco-Flo all in one stain and finish.
CAT. NO.
ITEM
PRICE
LFADB.............4 oz. Fudge Brown........... $9.95
(replaces Fiebing’s All In One Dark Brown.)
LFAM...............4 oz. Cherry Chocolate...... 9.95
(replaces Fiebing’s All In One Mahogany.)
LFAT................4 oz. Prairie Tan................. 9.95
(replaces Fiebing’s All In One Tan.)
WOOL SWABS
Great for applying dye or neatsfoot oil to sheaths. Sold
individually or by a pack of 20.
CAT. NO.
NEAT2
NEAT20
AMOUNT
1
20
fax (713) 461-8221
PRICE
$0.25
3.00
45
SHEATH MAKING SUPPLIES
SPACE MARKER
This handy tool marks your spacng before you hand sew to keep your stitches even.
Three sizes; #5 = 1/4” between stitches, #6 = 3/16” between stitches and
#7 = 1/8” between stitches
CAT. NO. ITEM
SNAPSETTERS
PRICE
MARK1..........Space maker #5....................$9.50
MARK2..........Space maker #6......................9.50
MARK3..........Space maker #7......................9.50
MARK4..........All in one space marker.........22.95
Size 5,6,7
SHEATH SNAP SETS
snapset1
snapset2
This setter consists of 1 setter pouch
and 1 anvil designed to set the snaps
sold with our leather sheaths and
kydex eyelets.The anvil has a concave
side and a flat side. SNAPSET1 is for
the 1/8” kydex eyelets & leather sheath
snap sets. SNAPSET2 is for the 1/4”
kydex eyelets.
HAND STITCHING KIT
4 brass or silver-plated pieces make up
a set. This four-piece set is the hardware
needed to install a snap on a sheath. Sold
by 1 set or by package of 50.
CAT. NO.
ITEM
PRICE
SNAP1S........SILVER............................... $0.75
SNAP1B........BRASS................................. 0.75
SNAP50S......SILVER 50 PACKAGE........ 27.95
SNAP50B......BRASS 50 PACKAGE........ 27.95
BLACK EYELET KIT
CAT. NO.
ITEM
PRICE
SNAPSET1......... Snap setter................. $ 6.95
SNAPSET2......... Snap setter................. $ 7.95
Loaded with all the basic tools for hand
stitching. Learn dozens of hand stitching techniques. Includes: overstitch
wheel, stitching awlhaft, three blades,
groover needles, thread, beeswax and
The Art of Hand Sewing Leather by Al
Stohlman. Al Stohlman introduces to a
variety of stitching techniques and provides you with valuable information on
the tools and materials needed to get
you started. Softcover, 72 pages.
CAT. NO.
PRICE
LSK1...................................................... $64.95
Publication only
PUB38...................................................... 14.95
MAKING LEATHER CASES
Vol.1 by Al Stohlman
AUTOMATIC SEWING AWL KIT
Great starter kit for leather, canvas,
etc. Sews a lock stitch just like a
machine! Kit includes black thread (21/2yds), one straight and one curved
diamond point needle, wrench and
instructions.
CAT.NO.
SIZE
PRICE/EA
ASAK..................Sewing Awl Kit . ........ $16.95
BLKT...................Thread 1(Black)............ 4.50
BRNT...................Thread 2(Brown).......... 4.50
WHTT..................Thread 3 (White).......... 4.50
This eyelet kit is intended for use in .060
Kydex. The package contains 100 (3/16”
dia.) black eyelets, 1 cobalt #14 drill, 1 set
eyelet setting punches and instructions.
CAT. NO.
PRICE
EYELETKIT............................................ $23.95
LEATHERWORK MANUAL
by Al Stohlman,
A.D. Patten &
J.A. Wilson
CAT.NO.
ITEM
PRICE/EA
LG1.....................Leather Groover ........ $11.95
46
CAT. NO.
PRICE
PUB27.................................................... $19.95
LACING & STITCHING FOR
LEATHERCRAFT
This book explains punching
lacing holes using thonging
chisels, lacing nippers, 4-in1 hole punch, overstitch
wheels, mini punch, and
rotary punch. It shows two
prong needles, hook and
eye needles, and life eye
needles and how to use
them. There is a page on
splicing plus ten different
lacing and stitching techniques with lots of black and
white illustrations showing
how to do them. Softcover,
21 pages.
This book gives a history
of leatherwork, leather
tools and how to use
them, leather fabrication,
techniques of structural
assembly, leather dyeing, and three leather
work projects (keycase,
billfold, and handbag
with patterns provided).
Softcover, 160 pages,
over 100 black and white
illustrations.
ADJUSTABLE GROOVER
The adjustable groover is for use in leather
work. Guaranteed to measure and gouge
grooves in one step. Widths adjust from
1/16” to 3/4”. With hardwood handle and
metal ferrule.
This book introduces you
to the various methods of
making patterns, and forming leathers over wooden
forms. Included are patterns for knife cases and
pocket knife cases. There
are lots of helpful illustrations to help you make
your leather piece.
CAT. NO.
PRICE
PUB26.................................................... $17.95
CAT. NO.
PRICE
PUB33......................................................$5.99
fax (713) 461-8221
KYDEX SHEATH MAKING SUPPLIES
CHICAGO SCREW
RIVET PRESS & DIES
7/16” head
CAT. NO.
CHICAGO1
PRICE/EACH
$.50
KYDEX SHEATH MAKING KIT
Rivet Flaring Dies
The sheath making kit contains everything you
need to make a quality kydex sheath:
1-12 x 12 piece of .08 kydex material (cell/
smooth finish), 1-Ball chain 20 lb. pull (breaking
strength). 10-(8-8 black rivets). Requires a .25
inch hole in the sheath for fastening.
1-Custom Preformed Kydex Belt Loop with
fastening hardware.
CAT. NO.
ITEM
PRICE
KYSK1................. Kydex Sheath Kit.....$11.95/ea.
CARBON FIBER PATTERNED
CONCEALEX
Kydex Rivet Press
Drop Ship Only
Our professional rivet flaring dies and unique press system will put a permanent end to split rivets
when fastening Kydex together in your sheath making process, or in any use where professional
fastening is required. This system will help you create the perfect “flare side” to help you add the
“professional” touch to your work. The 8-8 rivet is what is used for Chicago Screws. Note: The
#8 Rivets require a .25 inch hole (1/4) drilled in the Kydex for rivet fastening. The #6 Rivets require
a .187 inch hole (3/16) drilled in the Kydex for rivet fastening.
CAT. NO. ITEM
PRICE
KYRD6. ...... #6 (3/16) Rivet Flaring Dies............ $34.95/ea.
KYRD8. ...... #8 (1/4) Rivet Flaring Dies.................34.95/ea.
KYRPRS..... Kydex Rivet Press.....................89.95/ea.
(no dies incl.)
KYDEX BELT LOOP SYSTEM
Our heat moldable .06 and .093 gauge carbon
fiber patterned concealex sheet material is top
quality. This material forms between 160 and
300 degrees.
CAT. NO.
ITEM
PRICE
CXCF-126........Concealex (.06) 12”x12”.........$9.95/ft.
Carbon Fiber Pattern
CXCF-1293......Concealex (.093) 12”x12”.......10.95/ft.
FOAM TO MAKE
KYDEX SHEATH MOLD
Custom pre-formed kydex belt loop with fastening hardware (vertical/horizontal) carry.
CAT. NO.
PRICE/EA.
KYSBL1................................................... $6.95
BLACK COATED
KYDEX RIVETS
These black coated brass
Kydex rivets are the highest
quality available and are designed for use in the flaring
press. We have these in 3
sizes. They are perfect for all
types of fastening use.
CAT. NO.
ITEM
PRICE
KYSR66...........6-6 (3/16) black rivets........$10.00/100
(100 count) for .060 Kydex
KYSR88...........8-8 (1/4) black rivets............12.00/100
(100 count) for .060
and .080 Kydex
KYSR89...........8-9 (1/4) black rivets............14.00/100
(100 count) for .090 Kydex
KYDEX-CONCEALEX SHEATH MOLDING PRESS
This 12” x 8” or 24” x 8” kydex-concealex sheath maker
is built from rugged 1/4” steel plate. The professional
forming system is perfect for making either flat-faced
(one-sided), or a full fold-over (wrapped style) sheaths.
The top plate is removable for height adjustment.
Footer holes are pre-drilled so that the press can be
mounted to a bench.
Drop Ship Only
CAT. NO.
ITEM
PRICE/EA
A one inch thick, black PVC foam that is ideal
KKSMP-12..........Sheath Molding................$99.95
for making Kydex sheath molds.
Press (12”x8”)
CAT. NO.
SIZE
PRICE/EA KKSMP-24.......... Sheath Molding................159.95
KYDFO............... 12” X 12” X 1”............... $11.95 Press (24”x8”)
KYDEX EYELETS
Available in nickel plated, black painted, or brass. The 1/8” eyelet (used for .60”
Kydex) has a height of 0.197”, ID is 0.125”, OD is 0.144”. The 1/4” eyelet (used for
.60” or .90” Kydex) has a height of 0.256”, ID is 0.241”, OD is 0.261”.
CAT. NO.
ITEM
PRICE/PKG.
KYDEYE1........... EYELET BLACK- SMALL 1/8” dia. hole (50/pkg.).................$2.25
KYDEYE2........... EYELET BLACK- LARGE 1/4” dia. hole (20/pkg.)...................1.75
KYDEYE3........... EYELET SILVER- SMALL 1/8” dia. hole (50/pkg.)...................2.25
KYDEYE4........... EYELET SILVER- LARGE 1/4” dia. hole (20/pkg.)..................1.75
KYDEYE5........... EYELET BRASS- SMALL 1/8” dia. hole (50/pkg.)...................2.25
KYDEYE6........... EYELET BRASS- LARGE 1/4” dia. hole (20/pkg.)..................1.75
KYDEX SHEATH MATERIAL
Kydex is a tough sheath making material. It is waterproof and does not stain, shrink,
rot or lose it’s color or shape. It is heat formed and available in black. It comes in
.060” or .090” thicknesses. The instructions for forming the Kydex will be enclosed
with your order. We stock this material as a one (1) square foot sheet (12” x 12”) or
two (2) square foot sheet (12” x 24”). Larger sections are also available. Please let
us know which size you would prefer.
CAT. NO.
ITEM
PRICE/SQ.FT
KYDEX1...................... .060” Thick................................................... $6.50
KYDEX2...................... .090” Thick..................................................... 8.50
fax (713) 461-8221
47
KNIFE CASES AND POUCHES
KNIFE CASES
BLACK CORDURA FOLDER POUCH
BAMBOO DISPLAY BOX
These small pouches are perfect for
your belt. They are
lightweight and
have a Velcro closure.
These are an alternative to the sheath
for those knives that will not be used,
but displayed. Also, use it as a carrying
case that will safely protect that special
knife. Made of nylon cordura with polyfoam padding, soft fabric interior and
YKK nylon zipper. They are available
in black exterior. Dimensions are inside
measurements.
CAT. #
SIZE
PRICE
KC001.....................3” x 10”..................... $6.95
KC002.....................4” x 13”....................... 6.95
KC003.....................4” x 16”....................... 7.95
KC004.....................5” x 19”....................... 8.95
KC005.....................3” x 8”......................... 6.95
FOLDERCASE........1-1/2” x 5”................... 5.95
CAT. #
ITEM
PRICE
FSM.........................Sm. Pouch................ $4.95
FSL..........................Lg. Pouch................... 4.95
SMALL LEATHER KNIFE CASES
Made of black
l e a t h e r, t h e s e
knife cases are
soft and supple.
The sheep skin
lining cushions the
blade.
CAT. NO.
ITEM
PRICE
KCL001.............. 2” x 5”............................ $9.95
KCL002.............. 2-3/4” x 6”........................ 9.95
This bamboo storage/display box has a
glass top and cutouts for your folders.
The size of the box is 5-1/2” x 5-1/2”
x 1-1/8” deep. Keep your folders safe
and display them at the same time.
CAT. NO.
ITEM
PRICE
BAMCASE1....... CASE.......................... $12.95
BAMBOO STORAGE BOX
Beautiful large bamboo storage box
lined with dark blue velvet over foam
cushion. The size of the box is 14” long
x 10” wide x 3-1/8” deep.
12-SLOT KNIFE CARRY CASE
60-KNIFE ROLL CARRY CASE
After you’ve made or collected all of
your folder knives, you need something
to carry them in. This is the perfect
carry case. It’s 6” x 12” x 13” and has
room for 12 knives. The case is made
of black nylon canvas and it is padded
on the inside with soft dura-fleece. It
keeps your knives secure and protected from scratches. The flap folds
over and is secured with Velco.
This black nylon case will carry 60
knives all rolled up for convenience
when you’re traveling. A handle makes
it easy to carry. Inside is a brown velour lining to showcase your folders
and protect them from scratches. It
measures 18” wide x 29” long when
opened.
CAT. #
ITEM
PRICE
RKC-1................. KNIFE ROLL............... $21.95
48
CAT. NO.
ITEM
PRICE
BAMCASE3....... CASE.......................... $39.95
DISPLAY CASES
CAT. NO.
ITEM
PRICE
DRKC-1...................12 Slot.................... $14.95
Knife Carry Case
SMALL STINGRAY POUCHES
A stunning stingray folder pouch
is a great way to
carry and protect
your folder.
CAT. NO.
ITEM
PRICE
KCSR01............. 1-1/2” x 4-1/2” O.D...... $15.95
KCSR02............. 1-1/2” x 5-1/4” O.D........ 19.95
These cases are a perfect place to
store your favorite knives. Available
in oak, walnut or cedar. They are 12”
long x 9” wide. Please specify red or
green felt.
CAT. #
ITEM
PRICE
WDCASE.................Case....................... $45.00
fax (713) 461-8221
FOLDER KITS
BLFL006 FRAME-LOCK FOLDER KIT
FLX-25 FRAME-LOCK FOLDER KIT
The kit contains all of the parts necessary to complete the framelock folder kit including the cocobolo dymondwood handles. This
kit is easy to assemble and is an excellent piece for learning
basic assembly, frame-lock design, file work training, liner test
treatments and overlay experimentation. Because of the base
design simplicity, it is also a great kit for beginners, requiring no
modification to produce a great knife. Full stainless frame-lock
design with open-spacer backspine. Blade steel is AUS 8 which
has been heat treated to 56-58 rc. The pivot is stainless steel and
the washers are nylon.
CAT. NO.
CAT. NO.
ITEM PRICE
BLFLX25............... FLX-25 Frame Lock Folder Kit (Single)............... $18.95/ea
(includes 1 set standard finished cocobolo
Diamondwood handles)
BLFLX25-5............ FLX-25 Frame Lock Folder Kit (5 Pack)................ 16.25/ea
(Includes 5 sets of standard finished cocobolo
Diamondwood handles)
ITEM
PRICE
BLFL009.............FL009 Frame Lock Folder Kit (Single)........................................ $16.95/ea
(includes 1 set standard finished cocobolo handles)
BLFL009-5..........FL009 Frame Lock Folder Kit (5 Pack)......................................... 14.95/ea
(Includes 5 sets of standard finished cocobolo handles)
POCKET CLIP ASSEMBLY KIT
Clip Assembly Kit - Allows clip to be mounted in
bolster. Kit includes 3 extra long 1-72 Torx bolster
screws, tap handle, 1-72 tap and drill.
FRAME-LOCK FOLDERS
Bead blasted blade, AUS-8 stainless steel, cryo-treated to 56-58 rc.
Blade 3-3/8” long, overall length of 7-3/4”, handle 4-1/2” long. Dymondwood
handles are pre-milled and polished.
The pivot is stainless steel (pass-through) and the washers are nylon. There is a
standard pocket clip included and a pivot wrench.
These kits come with all the parts needed to put together the frame-lock folder.
This an easy kit for beginners, but also can be modified with file work. Full stainless frame-lock design with open-spacer backspine. It is fun to assemble, and a
great knife for the money. Choose the handle design that appeals to you.
PRICE
Blade Length: 2-3/4 Inches
Handle Length: 4-1/2 Inches
Overall Length: 3-3/4 Inches
CAT. NO.
ITEM
BLFL006............ Frame Lock Folder Kit (Single).................................................... $16.95/ea
(includes 1 set Dymondwood handle scales)
BLFL006-5..........Frame Lock Folder Kit (5 Pack)(Includes 5 sets of Dymond-..........74.75 (5)
wood handle scales)
CAT. NO. DDRCAK
PRICE
$19.95
TIGERSTRIPE RESINWOOD
Enhance the look of your frame lock folder by using tigerstripe resinwood
to make your own unique handles. Resinwood is made from resin impregnated natural wood with beautiful depth and color. It is easy to work
and polish and does not need a sealer. Available only as scales which
are 3/8” thick.
WINEWOOD SCALES
(SINGLE COLOR)
DW80S............................... $11.95/PR
WALNUT SCALES
(SINGLE COLOR)
DW81S................................$11.95/PR
CAT. NO.
ITEM
PRICE
BLFL001.............Frame Lock Folder Kit (Single)....................................................$16.95/ea
BLFL001-5..........Frame Lock Folder Kit (5 Pack)(Includes 5 sets of Dymond-............74.95 (5)
COCOBOLO SCALES
(SINGLE COLOR)
DW82S................................$11.95/PR
DESERT CAMO SCALES
(MULTICOLOR)
DW83S................................$11.95/PR
RIO GRANDE APPLEWOOD
SCALES (MULTICOLOR)
DW84S................................$11.95/PR
CAT. NO.
ITEM
PRICE
BLFL005.............Frame Lock Folder Kit (Single).................................................. $16.95/ea
BLFL005-5..........Frame Lock Folder Kit (5 Pack)(Includes 5 sets of Dymond-.......... 74.75 (5)
BLUE LAGOON SCALES
(MULTICOLOR)
DW85S................................$11.95/PR
fax (713) 461-8221
49
FOLDER KITS
The new DDR2TMModern Bowie and the DDR2TMTanto are the 2nd generation of the highly popular DDRII locking liner folder kit, introduced in
2000 by Darrel Ralph. There are many new refinements in these updated
versions with the high-performance design and quality you’ve come to
expect in Darrel Ralph’s kits. The parts and fittings are precision machined
and designed for maximum builder performance. The liners are stainless
steel and heat treated for low wear. The ball detent is pre-installed, the
lock is pre-bent, the steel is AUS-8 and has been cryogenically treated
to 56-58 rc hardness and the blade has been bead blasted and has a
high-satin finish.
Blade Length: 2.45 Inches
Handle Length: 3.335 Inches
Overall Length: 5.77 Inches
THE DDR2TM MODERN BOWIE
LOCKING LINER GENTS FOLDER KIT
THE DDR3TM LOCKING LINER FOLDER KIT
BLDDR3-RR
BLDDR3-TACS
The DDR3TM series locking liner kits by Darrel Ralph represent the culmination of precision development in the kit industry. You can match the
blade and bolster shapes that you prefer, and create your own personal
style folder. The blade length on the DDR3-TACS and the DDR3-RR is
3.60 inches. The closed length is 4.5 inches and the overall length is 8.1
inches. The blade has a 600 grit satin finished blade and pre-rounded
bolsters. The liners are stainless steel. All of the components are heat
treated for a lifetime of use.
CAT. NO.
CAT. NO. ITEM
PRICE
BLDDR2-MB......... (1) DDR2TM Modern Bowie Base Parts Kit . ...........................$36.95/ea
(no handle scales)
BLDDR2-MB5....... (5 units) - DDR2TM Modern Bowie Base parts Kits ...................34.95/ea
(no handle scales)
THE DDR2TM TANTO
LOCKING LINER GENTS FOLDER KIT
ITEM
PRICE
BLDDR3-RR.............(1 unit) Base Parts Kit(no handle scales).............................. $46.95/ea
Recurve Blade/Curved Bolster
BLDDR3-RS.............(1 unit) Base Parts Kit(no handle scales)................................ 46.95/ea
Recurve Blade/Straight Bolster
BLDDR3-TACR.........(1 unit) Base Parts Kit(no handle scales)................................ 46.95/ea
Tactical Blade/Curved Bolster
BLDDR3-TACS.........(1 unit) Base Parts Kit(no handle scales)................................ 46.95/ea
Tactical Blade/Straight Bolster
THE DDR3TM LOCKING LINER GUTHOOK KIT
CAT. NO. ITEM
PRICE
BLDDR2-TA.......... (1) DDR2TM Tanto Base Parts Kit (no handle scales).................$36.95/ea
BLDDR2-TA5........ (5 units) - DDR2TM Tanto Base parts Kits (no handle scales).......34.95/ea
THE DDR3TM BUTTON LOCK FOLDER KIT
The new DDR3TM series locking
liner Gut Hook Skinner Kit by Darrel
Ralph is the most modernized skinning folder kit on the market. The
profile is sleek and works great for
all skinning chores.
Mechanism Type: Locking Liner • Blade Steel: AUS 8 (Heat/Cryo-Treated) • Blade
Finish: 600 Grit Satin • Blade Style: Gut Hook • Blade Length: 3.50 Inches • Closed
Length: 4.50 Inches • Overall Length: 8.10 Inches • Liners: Stainless Steel (Heat
Treated)
CAT. NO.
ITEM
PRICE
BLDDR3-GR.............(1 unit) DDR3 Gut Hook Blade/Curved Bolster.......................$46.95/ea
Base Parts Kit (no handle scales)
BLDDR3-GS.............(1 unit) DDR3 Gut Hook Blade/Straight Bolster........................46.95/ea
Base Parts Kit (no handle scales)
The DDR3TM series button lock folder kit will offer the builder more options
in performance with the button locking system design. This kit will only be
offered in the above bolster configuration Designed by Darrel Ralph to be
the finest quality kit available, with the added functionality of the button
lock system (with standard safety switch), you’ll have to look hard to find
a better knife for the money. The kit comes standard with a 600 grit satin
finished blade and pre-radiused bolsters; stainless hardware and liners
for a high-strength precision fit; hardened AUS8 blade steel that is cryo
tempered; plus a precision fit and finish throughout. The DDR3-BL model
offers a choice for the builder that allows the creation of a perfect knife for
the job, or for the ultimate commisssioned project piece with a twist.
Blade Length: 3.60 Inches
Closed Length: 4.50 Inches
Overall Length: 8.10 Inches
CAT. NO. ITEM
PRICE
BLDDR3BL................. (1) Base Parts Kit (no handle scales)....................................$56.95/ea
BLDDR3BL-5............. (5 pack special) - Base parts Kits (no handle scales)...............52.95/ea
50
GX6TM LOCKING LINER GENT’S POCKET DAGGER
The GX6TM is a Locking Liner Gent’s Dagger, designed by Darrel Ralph
for the hobbyist that likes a sleek, more stylized design. All parts and fittings of this premium folder kit are precision machined. The blade length
is 2.75 inches and the overall length is 6.25 inches. The blade steel is
AUS-8 and has been cryogenically treated to 56-58 rc. Satin bead blast
finish only. The liners are heat treated stainless steel. The GX6TM will not
come pre-drilled on the bolster or liners for a clip.
CAT. NO.
ITEM
PRICE
BLGX6............. (1) Base Parts Kit (no handle scales)..........................$44.95/ea.
BLGX65.......... (5 pack special) - Base parts Kits (no handle scales).....39.95/ea.
fax (713) 461-8221
FOLDER KITS
3-1/2” TRAPPER
GPC-1000TM LOCKING LINER FOLDER
The GPC-1000TM is a liner lock designed for the hobbyist that likes a sleek,
stylized design. It is designed to look good as a “high-tech” piece, with
standard micarta, G-10 or carbon fiber scales, or as a “high-finish” model
with materials, such as pearl, exotic woods and with embellishments on
the liners and bolsters. The blade steel is AUS-8 and has been cryogenically treated to a 56-58 rc. Satin bead blast finish only. The blade length
is 2.75 inches, and the overall length is 6.5 inches. The liners are heat
treated stainless steel.
CAT. NO.
ITEM
PRICE
BLGPC............. (1) Base Parts Kit (no handle scales)...............................................$44.95/ea
BLGPC5.......... (5 pack special) - Base parts Kits (no handle scales)..........................39.95/ea
3-1/2” trapper with two satin finished 2-3/8” blades. Includes brass liners,
nickel silver bolsters and pins. Cryogenically treated. Handle material
not included.
CAT. NO.
ITEM
PRICE
BL1583.................................... 3-1/2” TRAPPER KIT..................... $24.95
THE TALON LOCKING LINER
4-1/8” TRAPPER
The Talon is a sleek 2-tone stainless steel and black liner lock. It is 3-3/4”
closed and has a stainless steel handle with groves and a pocket clip.
The folder kit has parts which are easy to assemble and the kit is perfect
for the beginning or experienced knifemaker. After assembly, you will find
that the blade opens smoothly and effortlessly.
CAT. NO.
ITEM
PRICE
BL201........................ Locking Liner Kit.......................................... $24.95
4-1/8” trapper with two satin finished 3” blades. Includes brass liners,
nickel silver bolsters and pins. Cryogenically treated. Handle material
not included.
CAT. NO.
ITEM
PRICE
BL1582.................................... FOLDER KIT.................................. $29.95
EXTRA LARGE TRAPPER
MODERN INLAY FOLDER
This modern locking liner
kit comes with two inlays of
black G10 handle material
on each side. The kit is recommended for beginning to
advanced knifemakers.
The overall length of the
folder is 6”, the blade length
is 2.5”, the closed length is
3.5”. The blade is made of
440 stainless steel (RC 5255) and has a bead blasted
finish. The washers are
nylon. All of the parts and instructions are included to put
together the basic kit.Takes
a Torx T6 and T8 which are
not included.
CAT. NO.
ITEM
PRICE
BLGI13...................... Locking Liner Kit.......................................... $24.95
This is our very popular, extra large trapper with nickel-silver bolsters
attached to stainless liners. The finished folder make’s a fine rancher’s
trapper. The blade is 3-1/2” long, and it’s made of high quality, 440 stainless steel which has been cryogenically treated. The knife is 8” overall
when open, and 4-1/2” closed. The kit includes pins, springs and thong
hole tubing. Handle material not included.
CAT. NO.
ITEM
PRICE
BL1163.................................... FOLDER KIT.................................. $31.95
fax (713) 461-8221
51
FOLDER KITS
3-1/2” LOCKBACK
HEAVY-DUTY LOCKBACK
This is a sleek clip point blade. The handle has front and back nickel/silver
bolsters. 6-1/4” overall open. 3-1/2” closed. Satin finished. Cryogenically
treated. Handle material not included.
CAT. NO.
ITEM
PRICE
BL1158...................... 3-1/2” LOCKBACK KIT................................. $23.95
This heavy-duty lockback has a 3-1/4” satin finished hollow ground blade
with brass liners, nickel silver bolsters and pins. It measures 3-1/2” closed
and the overall length is 7-1/2”. Fits pouch, Cat. No. SHE22. Cryogenically
SATIN FINISH LOCKBACK
CAT. NO.
ITEM
PRICE
BL1162...................... 3-1/2” DROP POINT.................................... $34.95
HEAVY-DUTY DAMASCUS LOCKBACK
3” closed, 5-1/2” overall length with a satin finished, flat ground, 2” blade.
It comes with nickel silver bolsters, liners, pins and tubing. Cryogenically
CAT. NO.
ITEM
PRICE
BL1159...................... 3” SMALL LOCKBACK KIT.......................... $26.95
4” LOCKBACK
This lockback is the same as BL1162 except that it has a beautiful
3-1/4” hollow ground Damascus laminate blade. Overall length is 7-1/2”.
Fits pouch, Cat. No. SHE22. Cryogenically treated. Handle material not
included.
CAT. NO.
ITEM
PRICE
BL1162D................... 3-1/2” DROP POINT DAMASCUS............... $94.95
On Sale for $75.95
3-3/4” LOCKBACK
7” overall length open, 2-1/2” satin finished flat ground blade with nickel
silver bolsters, liners, pins and thong hole tubing. Cryogenically treated.
Handle material not included.
CAT. NO.
ITEM
PRICE
BL1165...................... 4 “ LOCKBACK KIT...................................... $29.95
52
3-3/4” lock back, 6-1/2” overall open with a 2-1/2” satin finished, clip point,
hollow ground blade. Includes nickel silver bolsters and pins with brass
liners. Cryogenically treated. Handle material not included.
CAT. NO.
ITEM
PRICE
BL1166...................... 3-3/4” LOCKBACK KIT................................. $31.95
fax (713) 461-8221
FOLDER KITS
LITTLE HAWK LOCKBACK
The Little Hawk Lockback kit has a 2-1/2” satin finished, hollow ground
blade that is made of 6A steel with vanadium added. It has been cryogenically treated for additional toughness and edge holdng. The bolsters and
liners are nickel/silver. The knife is 3-5/8” when it is closed and 6-3/8” when
open. Handle material not included.
CAT. NO.
ITEM
PRICE
BL1667...................... LITTLE HAWK LOCKBACK KIT..................$24.95
THE GAMBLER LOCKBACK
BAMBOO DISPLAY BOX
This bamboo storage/display box has a glass top and cutouts for your folders. The size of the box is 5-1/2” x 5-1/2”
x 1-1/8” deep. Keep your folders safe and display them at
the same time.
CAT. NO.
ITEM
PRICE
BAMCASE1........................... BAMBOO CASE............................. $12.95
SMALL STINGRAY POUCHES
A stunning stingray folder
pouch is a great way to carry
and protect your folder.
Lockback, 4-1/8” closed, 7-1/8” overall length. This kit includes 2-3/4”
satin finished blade, nickel silver bolster material, brass liner and pins.
Cryogenically treated. Handle material not included.
CAT. NO.
ITEM
PRICE
BL1164...................... THE GAMBLER LOCKBACK KIT................ $28.95
CAT. NO.
ITEM
PRICE
KCSR01................................. 1-1/2” x 4-1/2” O.D.......................... $15.95
KCSR02.................................1-1/2” x 5-1/4” O.D............................ 19.95
60-KNIFE ROLL CARRY CASE
Supply. Get yours
today!!
www.texasknife.com
This black nylon case will carry 60 knives all rolled up for
convenience when you’re traveling. A handle makes it easy
to carry. Inside is a brown velour lining to showcase your
folders and protect them from scratches. It measures 18”
wide x 29” long when opened.
CAT. #
ITEM
PRICE
RKC-1.....................................KNIFE ROLL...................................$21.95
fax (713) 461-8221
53
FOLDER HARDWARE & SUPPLIES
BRONZE BUSHINGS FOR FOLDER BLADES
BUTTON HEAD TORX SCREWS - SS
This little guy fits between the main blade pin and the blade so that the
bushing rolls on the pin instead of the blade rolling on the pin. Makes for
smooth action and the blade does not cut or drag on the pin and comes
with a 1/8” dia. hole .
SIZE
CAT. NO. PRICE/10 CAT.NO. WRENCH PRICE/50
0-80X1/4....S01X10...... $3.50....... S02X50.......... T5............. $12.95
1-72X1/4....S03X10 . .....3.50....... S04X50.......... T5............... 12.95
2-56X1/4....S05X10 . .....3.50....... S06X50.......... T6............... 12.95
SIZE
0-80X1/4
1-72X1/4
2-56X1/4
CAT. NO. SIZE
QTY
PRICE
BU001........ 1/4” dia. x 1/4” long......... 1............. $0.55
BU00120.... 1/4” dia. x 1/4” long......... 20............. 9.00
BU00150.... 1/4” dia. x 1/4” long......... 50........... 17.50
BU002........ 1/4” dia. x 1/8” long......... 1............... 0.55
BU00220.... 1/4” dia. x 1/8” long......... 20............. 9.00
BU00250.... 1/4” dia. x 1/8” long......... 50........... 17.50
BU003........ 3/16” dia. x 1/4” long....... 1............... 0.55
BU00320.... 3/16” dia. x 1/4” long....... 20............. 9.00
BU00350.... 3/16” dia. x 1/4” long....... 50........... 17.50
FLAT HEAD TORX SCREWS - SS
S07X10 $3.50
S08X50
T5
$12.95
S09X10....... 3.50
S010X50
T5
12.95
S011X10..... 3.50
S012X5 T6
12.95
SOCKET HEAD TORX SCREWS -SS
SIZE
0-80X1/4... S013X10.... $3.50.......S014X50........T5............ $12.95
1-72X1/4... S015X10......3.50.......S016X50....... T6............... 12.95
2-56X1/4... S017X10......3.50.......S018X50....... T7............... 12.95
POCKET CLIP BLANKS
BUTTON HEAD TORX SCREWS -SS
SIZE
CAT. NO. ITEM
PRICE
4-40(.208 head)......... 440BHT25...............PKG./25......................... $6.95
4-40 (.1875 head)...... 1875BHT25.............PKG./25........................... 6.95
6-32........................... 632BHT25...............PKG./25........................... 6.95
BUTTON HEAD TORX SCREWS - GOLD PLATED
Hard gold plate. 99%, 24k with Cobalt.
SIZE
CAT.NO.
PRICE/10
CAT.NO.
WRENCH
PRICE/50
0-80X1/4...... SG1X10...........$10.95............SG2X50............. T5.....................$24.95
1-72X1/4...... SG3X10.............10.95............SG4X50............. T5.......................24.95
2-56X1/4...... SG5X10.............10.95............SG6X50............. T6.......................24.95
FLAT HEAD TORX SCREWS - GOLD PLATED
Small size is 2-1/8”L x 3/8”W.
Large size is 2-13/16”L x 7/16”W.
CAT. NO.
DESCRIPTION
PRICE
CLIP02.................... SMALL POCKET CLIP BLACK........................ $3.95
CLIP03.................... SMALL POCKET CLIP POLISHED................... 4.95
CLIP04.................... LARGE POCKET CLIP BLACK......................... 4.50
CLIP05.................... LARGE POCKET CLIP POLISHED................... 5.50
SPRING MATERIAL
SIZE
CAT.NO.
PRICE/10
CAT.NO.
WRENCH
PRICE/50
0-80X1/4...... SG7X10...........$10.95............SG8X50............. T5.................... $24.95
1-72X1/4...... SG9X10.............10.95............SG10X50........... T5...................... 24.95
SOCKET HEAD TORX SCREWS - GOLD PLATED
SIZE
CAT.NO.
PRICE/10
CAT.NO.
WRENCH
PRICE/50
0-80X1/4...... SG13X10.........$10.95............SG14X50........... T5.....................$24.95
1-72X1/4...... SG15X10...........10.95............SG16X50........... T6.......................24.95
TORX WRENCH FLAG STYLE
PROFESSIONAL TORX WRENCHES
CAT. NO. WRENCH
PRICE
TW01.................T5.........................$4.95
TW02.................T6...........................4.95
TW03.................T7...........................4.95
TW07.................T8...........................4.95
TORX WRENCH SOLID HANDLE
CAT. NO. WRENCH
PRICE
TW04.................T5................$7.95
TW05.................T6..................7.95
TW06.................T7..................7.95
TW08.................T8..................7.95
STOP PINS
Precision ground and heat treated.
CAT. NO.
SIZE
PRICE
SP01.................................... 3/32” X 3/8”.......................................... $0.95
SP02.................................... 1/8” X 3/8”.............................................. 0.95
SP03.................................... 3/16” X 1/2”............................................ 0.95
TITANIUM POCKET CLIP BLANKS
Blanks are 1/4” wide at the narrow end, 9/16”
wide at the wide end, with an overall length of
2-3/4” long.
CAT. NO.
PRICE
CLIP01............................................................................................. $3.95
54
Work hardened 302 stainless steel in three sizes. Tough enough for the
spring tension you want for your folders to work properly. Bendable for
easy adjustment to fit almost any situation. Soft enough to be filed to proper
width or thickness for adjusting tension.
CAT. NO
SIZE PRICE
SM001............... 0.088” wide x .062” thick x 12” long....................... $1.35
SM002...............0.120” wide x .062” thick x 12” long.......................... 1.35
SM003...............0.170” wide x .062” thick x 12” long.......................... 1.35
These single pro Torx wrenches are the
best we’ve found for the money. They are
made in Germany and have a rotating rear
cap holder that allows you to spin the screw
while holding the wrench tight, straight and
firm. They are made from hardened steel
and have highly visible impact resistant
handles.
CAT. NO
SIZE PRICE
PTW5..................................... Size T5...............................................$8.95
PTW6 ................................. Size T6................................................ 8.95
PTW7 ................................ Size T7................................................ 8.95
PTW8 ................................ Size T8................................................ 8.95
PTW10 .............................. Size T10.............................................. 8.95
PTW68 ................................. Size T6/T8 Combo Set.......................16.95
TORX MULTITOOL
This Multi Tool has T5, T6, T7, T8,
T9, T10, T15, T20, and T25 Torx
Keys. The keys fold in when you are
not using them.
CAT. NO. ITEM
PRICE
TORX1.........MULTITOOL.......$16.95
fax (713) 461-8221
FOLDER HARDWARE & SUPPLIES
NYLOTRON WASHERS
CAT. NO.
ITEM
PRICE/PAIR
WASHN01.......Hole 1/8”, OD 1/4”............ $0.50
WASHN02.......Hole 7/32”, OD 1/2”............ 0.50
WASHN03.......Hole 3/16”, OD 1/2”............ 0.50
PHOSPHOROUS-BRONZE
WASHERS
The larger washers are designed to fit a 3/16”
pivot pin in any folding knife or balisong on the
market. They help the blade to become more
ridged in the handle, reducing sde-to-side play,
while producing the smoothest action and slippage available. The small size 5/32” washer fits
a .162 pivot.
PRECISION PIVOT
ASSEMBLY STUD
This stud was designed for minumum space in a folder assembly.
The stud head is the same size
as a 2-56 socket head cap screw.
The ream size is .125. Under the
stud head is a .001 increase in
size to make the stud a semipress fit to hold it in place while
tightening the screw.
CAT. NO.
PRICE
DRPPAS1................................................. $4.95
3/16 PRESS FIT PIVOT STUD
These pivots have a 3/16” diameter with the head at .205 to
work with a 4-40 button head
on the opposite side.
CAT. NO. PRICE
DRPFPS1................................................. $4.95
DRSTB56
DRSTS56
CAT. NO.
ITEM
PRICE
PBW316-1.......Pkg. of 1 set*(3/16”)... $1.79/set
PBWS532-1....Pkg. of 1 set *(5/32”).... 1.79/set
*1set = 2 washers
PRECISION PIVOT ASSEMBLY
This assembly is for the advanced knifemaker who wants
a Smooth action. The ream
size is .1875. The bushing is
fitted within .0002 to slip-fit the
stud. The bushing is made from
hardened stainless steel. The
barrel o.d. is .310.
CAT. NO.
PRICE
DRPPK1...................................................$5.50
DETENT BALL BEARINGS
The small UTS is .16 dia. x .20 height. The large
is .25 dia. x .20 height. You can easily customize
them to your own design.
CAT. NO.
ITEM
PRICE
DRUTS-1................ Small................... $4.95/ea.
DRUTL-1................ Large.................... 5.95/ea.
STEP PIVOT PINS
440C stainless
steel. 1/16”.
CAT. NO.
ITEM
PRICE
BB01X100.............. 100.......................... $15.00
THREAD LOCKER
Thread Locker by Devcon
keeps nuts and bolts tightly
fastened. Waterproof. Remove nuts and bolts easily
with ordinary tools after using
Thread Locker. 3oz. size.
CAT. NO.
PRICE
TL01........................... $3.00
DRSTB72
DRSTS72
DRSTB80
DRSTS80
CAT. NO. SIZE PRICE
DRSTB56.... #19, button head 2-56.............. $15.95
DRSTS56.... 5/32 x 3/32, 2-56 socket head....15.95
DrSTb72.... 5/32 x 3/32, 1-72 buton head......15.95
DRSTs72.... #31,1-72 socket head.................15.95
DRSTb80.... 7/64 x 0.065, 0-80 buton head....15.95
DRSTS80.... #38,0-80 socket head.................15.95
TAP & TAP WRENCH
UNIVERSAL THUMBSTUD SYSTEM
82 DEGREE COUNTERSINK
For flat head screws. Double ended 1/4” shaft,
high speed steel.
CAT. NO.
PRICE
DRCS25................................................... $9.95
PRECISION STEP DRILLS
These drill bits are designed to drill out holes and
recesses to fit the fasteners, rivets, Torx, and
other specialized screws we sell. The step drills
we sell are not jobber quality tools. These are
made to our rigid specifications using American
Twist Drills and are very well made and precise.
We do not recommend using them on steel or
metal, but these are perfect for handle making
and other precision uses.
CAT. NO.
ITEM
PRICE
TAP01...................... 0-80......................... $9.95
TAP02...................... 2-56........................... 9.95
TAP03...................... 1-72........................... 9.95
TAPW...................... Tap Wrench................ 9.95
STAINLESS STANDOFF
CAT. NO.
PRICE
SF01..................................... $0.95
THREAD LOCK THUMB BOBS
pp02
PP03
CAT. NO.
SIZE
PRICE
PP02 . ..........1/4” x 3/16” x 6-32 tap... $2.50/ea.
PP03.............3/16” x 1/8” x 2-56 tap..... 2.50/ea.
BARREL PIVOT PINS
CAT. NO. SIZE
PRICE
PP01............1/8” X 1/2” X 2/56” tap.... $2.50/ea.
PP05............1/4” X 1/2” X 8/32” tap...... 2.50/ea.
1 barrel, 2 screws/set
This item makes folders easy to open with one
hand. It consists of a stainless steel knurled nut
and a stainless steel screw with Allen head. The
nut is about .200” o.d. and 3/8” long. The screw
needs a .080 dia. hole to slide through and
tighten up in the nut. Use #44 drill. Sold per set.
Set consists of (1) nut and screw.
CAT. NO. ITEM PRICE
TB101...................... Pkg. of 1 ................. $0.95
TB102...................... Pkg. of 25................. 18.95
fax (713) 461-8221
55
STAINLESS STEEL FILLET BLADES
FINEST FILLET BLADE OR KIT
BASS TOURNAMENT FILLET
Example shown uses Blue Lagoon Tiger Sripe Resinwood handle material. Tiger Stripe Resinwood is an upgrade and will add to the cost of the
kit. Please call for kit price.
Dymondwood scales in your choice of color and 30 min. epoxy included
in kit.
Available as blade
or kit with blade.
The BLADE is 12” overall length, 7” long blade,
3/4” wide and just under
1/8” thick, flat ground
and satin finished, 440C
stainless steel. Even,
1-7/8” of serrations for
heads and tails. Holes
for all bolts or rods are
3/16” diameter. Thong
hole is 1/4” diameter. Use
guard GN546.
The KIT consists of blade, GN546 nickel/silver guard, (3) 3/16” diameter
nickel/silver pins cut to fit, (1) 1/4” nickel/silver thong hole tubing cut to fit,
Dymondwood handle material (3/8” thick x 1-1/2”wide x 5” long) in your
choice of color, 30 minute epoxy and instructions on how to assemble
your knife. BLADE FITS SHEATH #19.
CAT. NO.
ITEM
PRICE
BL546..................... BLADE ONLY................................................. $19.95
BL546C.................. BLADE W/CRYOGENIC TEMPERING............ 23.45
BL546K.................. BLADE KIT....................................................... 31.95
BL546KC............... BLADE KIT W/CRYOGENIC TEMPERING...... 35.45
GN546.................... #546 GUARD-slotted and predrilled to fit........... 9.95
SHE19.................... SHEATH #19.................................................... 15.95
IDAHO TROUT FILLET
Example shown uses a stabilized wood handle material. Sheath has been
finished with neatsfoot oil.
11-1/2” over all length, 6-1/2” blade, 1/2” wide and 1/16” thick. This knife
has a blade of superior 8-A stainless steel and is hollow ground. Has good
tang shape with three holes for pins of 1/8” diameter. FITS SHEATH #1.
Handle material not included.
CAT. NO.
ITEM
PRICE
BL070..................... BLADE ONLY................................................... $9.95
BL070C.................. BLADE W/DEEP CRYOGENIC........................ 13.45
o
TEMPERING (-305 F)
This sheath fits blades BL070 and BLSFS7 or blade length of 6-1/2” to 7”.
CAT. NO.
ITEM
PRICE
SHE1............................. SHEATH #1............................................. $15.95
SALMON FILLET
10-1/4” overall length, 5-1/2” blade, 1” wide at ricasso and 1/16” thick. Flat
ground and mirror polish makes this blade just perfect. Extra flexible 8-A
stainless steel blade is truly the trout fisherman’s dream. Nice tang with
three holes for 1/8” diameter pins. FITS SHEATH # 17. Handle material
not included.
CAT. NO.
ITEM
PRICE
BL060..................... BLADE ONLY................................................. $11.50
o
TEMPERING (-305 F)
EAST BAY FILLET
STEELHEAD FILLET
12-1/4” overall length, 7” blade, 3/32” thick, 440C stainless steel. Flat
ground and satin finished. Good looking and functional upswept tip with
a neat pistol grip handle with very good tip flexibility. All eight holes take
3/32” diameter pins. The forward holes are for a bolster if you want. FITS
SHEATH #12.
CAT. NO.
ITEM
PRICE
BL447..................... BLADE ONLY................................................. $17.95
o
TEMPERING (-305 F)
56
Carbon Damascus full tang fillet. The blade has an overall length of 11-1/2”
with a 6-1/2” blade length, 5/8” width and 1/8” thickness. The blade is made
of 1075/15N20 in a twist pattern. Pin holes are 5/32”. Use SHEATH #1.
CAT. NO.
ITEM PRICE
BLS-28...........................BLADE ONLY ....................................... $125.50
Carbon Damascus full tang fillet. The blade has an overall length of 9-1/2”
with a 5” blade length, 5/8” width and 1/8” thickness. The blade is made
of 1075/15N20 in a twist pattern. Pin holes are 5/32”. Sheath not available at this time.
Cat. No.
Item
Price
BLS-11........................... BLADE ONLY......................................... $ 89.95
fax (713) 461-8221
STAINLESS STEEL FILLET & DIVE BLADES
FLEXIBLE FILLET BLADE
Made of 440C stainless steel, 11-7/8” overall length, 7” long blade, satin
finished and hollow ground, 1/16” thick. Three 5/32” diameter holes for
your favorite pin stock. FITS SHEATH #1.
CAT. NO. ITEM
PRICE
BLSFS7C ............... BLADE W/DEEP..............................................18.95
o
CRYOGENIC TEMPERING (-305 F)
TEXAS FILLET
Our sheaths are constructed from vegetable oil tanned leather
and are ready to be shaped to your knife. The following steps will
help you form this sheath. The sheath is very thirsty, so do not wet
until necessary.
Items to assemble ahead of time: hairdryer, plastic wrap or
floor wax if knife is carbon steel, leather dye, if desired, neatsfoot
oil and wool swabs for applying the oil.
Compare the sheath to your knife and be sure they can be fitted
together. Handle end should extend from top of sheath (pouch type)
about 1-1/4” on smaller knives and 1-1/2” to 2” on larger knives.
Cryogenicically treated high carbon stainless steel blade. 16” overall
lenghth,1/16” thick with 10-1/2” cutting edge. Use (3) 1/8” pins. Satin finished and hollow ground. Sure to help out with those bigger than average
fish. Uses an extra long SHEATH, #SHE-TEX.
CAT. NO.
ITEM
PRICE
BL707C .................. BLADE W/DEEP ........................................... $18.45
o
SHE-TEX................. SHEATH FOR TEXAS FILLET......................... 17.95
STINGRAY FILLET
The length of this double edge fillet is 12-1/2" overall. The blade is a
long 7" and 5/8" wide. The pinhole diameter is 5/32".
CAT. NO. ITEM
PRICE
BL050 . ................... BLADE ONLY................................................... $9.95
BL050C.................. BLADE W/DEEP............................................... 13.45
o
OCEAN EDGE DIVE SERIES
MODEL A
9-1/4” overall length, 3/16” thick, 440C stainless steel with a satin finish.
This blade is cryo treated and double tempered, and dive ready!
CAT. NO.
ITEM
PRICE
BLMODAC.............. BLADE CRYO-TREATED(-305oF)................. $13.95
& DOUBLE TEMPERED
MODEL B
9-3/4” overall length, 3/16” thick, 440C stainless steel with a satin finish.
This blade is cryo treated and double tempered, and dive ready!
CAT. NO.
ITEM
PRICE
BLMODBC.............. BLADE CRYO-TREATED(-305oF)................. $13.95
& DOUBLE TEMPERED
INFORMATION FOR FINISHING A SHEATH
Hands must be clean. Hold the sheath under a cold water
faucet and allow water to flow over and inside the entire sheath.
This takes about one minute. Pour out excess water. Push knife into
the sheath as far as possible without cutting through the bottom of
the sheath. Do not force knife tip through the end of sheath, and
do not hold tip of sheath or force against any part of your body,
because one could cut through the leather and cut oneself. Knife
should now be very tight in the wet sheath. If the blade is carbon
steel, then it should be protected with plastic wrap or floor wax
(not buffed off) to prevent oxidation (rust) due to water exposure.
Now that the knife is securely inside the sheath, begin to form
the sheath to fit the knife by rubbing with your fingers around the
blade portion, guard and/or finger groves. Form around any shape
that can be used to hold knife inside the sheath. The idea is to
mold the leather to fit very tightly around the knife so that it will not
fall out of the sheath when it is being worn on the belt.
It is helpful if another person can hold a hair dryer about
one foot away from the sheath while it is being shaped. Mold the
sheath until the natural color begins to return and some stiffening
of the leather begins. Remove the knife from the sheath and store
safely. Again mold the same area as before, and go over the areas
disturbed when you removed the knife from the sheath. Be sure to
keep the sewn edge straight and open the belt loop slightly. When
sheath looks like it is formed as you wish, then hang it in an area
so that it will not be disturbed until completely dry and hard. A few
hours in the sun or even hanging from an air vent over night should
allow it to dry completely.
Sheath will now be stiff and ready to dye with leather dye, or
simply to color and oil with neatsfoot oil. Apply four heavy coats
of neatsfoot oil with a wool swab or cotton ball. These four coats
may be applied at one time. Again, allow sheath to dry at least 6
hours. If color is too light, just add more neatsfoot oil to darken.
If waterproof seal is desired, then add a heavy coat of mink oil or
snow seal. The knife should be carried, but not stored inside the
sheath.
fax (713) 461-8221
57
STAINLESS STEEL BLADES & KNIFE KITS
BOONE & CROCKETT SKINNER BLADE OR KIT
Available as blade or kit
with blade.
The BL408 example above is shown
with Dymondwood handle material.
The BLADE has a mirror finish made from high carbon 6A stainless. The
300B, 400B, or 500B hidden bolts are a great choice for pin material, or
use the 3/16” rod and 1/4” thong hole tubing. The overall length of the
blade blank is 7-3/4”, the blade is 3-3/4” wide and 5/32” thick. The bolster
holes are 3/32”. Use SHEATH #4. The KIT comes with the blade, pin and
thong hole tubing, Dymondwood handle material in your choice of color,
30 minute epoxy and instructions to assemble your knife.
CAT. NO.
ITEM
PRICE
BL408.......................BLADE ONLY................................................ $20.95
BL408C................... BLADE W/DEEP CRYOGENIC....................... 24.45
TEMPERING (-305oF)
BL408K................... BLADE KIT...................................................... 25.95
BL408KC................ BLADE KIT W/CRYO TEMP (-305oF).............. 28.45
TEXAS SKINNER BLADE OR KIT
BLADE blank is 7-5/8” overall
in length, with a blade that is
3” long, 1-1/4” wide, and 5/32”
thick. Very slight upswept
point makes this blade especially good for skinning. Highly
polished 6A high carbon stainless with better edgeholding.
FITS SHEATH #3.
The KIT consists of the blade,
Dymondwood scales, 3/8”
Available as blade or kit with blade.
thick x 1-1/2 wide x 5” long
(your choice of colors), (2) brass 1/4” dia. pins precut to fit, 30 minute
epoxy, and instructions to assemble your knife.
CAT. NO.
ITEM
PRICE
BL409...................... BLADE ONLY................................................ $20.95
TEMPERING (-305oF)
BL409K....................BLADE KIT...................................................... 26.95
BL409KC.................BLADE KIT W/CRYO TEMP (-305oF)............. 29.45
SAM HOUSTON SKINNER BLADE OR KIT
Available as blade or
kit with blade.
The BLADE blank is
8-1/4” in overall length,
with a blade length
that is 3-5/8”, width of
1-1/16” and thickness of
5/32” . There are three
5/32” diameter holes
for rods or pins. Blade
is slightly dropped at
point. Made of 6A high carbon stainless steel for better edge holding, this
blade is hollow ground and highly polished.The KIT contains Dymondwood
scales, (3/8” thick x 1-1/2” wide x 5” long) in your choice of color, (3) brass
5/32” dia. pins precut to fit, 30 minute epoxy, and instructions to assemble
your knife. FITS SHEATH #3.
CAT. NO.
ITEM
PRICE
BL410...................... BLADE ONLY................................................ $20.95
BL410C................... BLADE W/DEEP CRYO TEMP (-305oF).......... 24.45
BL410K................... BLADE KIT...................................................... 26.95
BL410KC................ BLADE KIT W/CRYO TEMP (-305oF).............. 29.45
58
LAREDO SKINNER BLADE OR KIT
The BLADE blank is 9” in overall length, with a blade that is 4-3/4” long,
1” wide and 5/32” thick. Narrow trailing point design and good balance
makes this one perfect for most camping and hunting needs. 6A high
carbon stainless steel. Tangs are prepared with three 5/32” holes for pins,
rivets, or bolts of the SB type. FITS SHEATH #2.
The KIT consists of the blade, Dymondwood scales, 3/8” thick x 1-1/2 wide
x 5” long (your choice of colors), (3) brass 5/32” dia. pins precut to fit, 30
minute epoxy, and instructions to assemble your knife.
CAT. NO.
ITEM
PRICE
BL411....................... BLADE ONLY............................................... $20.95
BL411C.................... BLADE W/DEEP CRYOGENIC...................... 24.45
TEMPERING (-305oF)
BL411K.................... BLADE KIT..................................................... 26.95
BL411KC.................. BLADE KIT W/CRYO TEMP (-305oF)............. 29.45
BRAZOS SKINNER BLADE OR KIT
Available as blade or kit with
blade.
The BLADE blank is 8-7/8” in
overall length, 4-1/4” long blade,
1-1/4” wide at ricasso and 5/32”
thick. Beautiful hollow grind and
very highly polished which not only
looks good, but is easy to sharpen.
The integral finger groove in the
handle (typical in this group of
blades) makes it unnecessary to
add a special guard and saves time. Upswept blade made of super 6A
high carbon stainless steel. FITS SHEATH #11.
The KIT consists of the blade, Dymondwood scales, 3/8” thick x 1-1/2 wide
x 5” long (your choice of color), (3) brass 5/32” dia. pins precut to fit, 30
minute epoxy, and instructions to assemble your knife.
CAT. NO.
ITEM
PRICE
BL412....................... BLADE ONLY............................................... $20.95
TEMPERING (-305oF)
BL412K.................... BLADE KIT..................................................... 26.95
BL412KC................. BLADE KIT W/CRYO TEMP (-305oF)............. 29.45
PECOS BULLNOSE SKINNER
The overall length of this skinner is 7-3/4”. It has a 3-1/2” satin finished,
hollow ground 440C blade. FITS SHEATH #4. Handle material not included.
Optional bolster. Use drill #31. BO422 may be used.
CAT. NO.
ITEM
PRICE
BL422....................... BLADE ONLY............................................... $25.95
TEMPERING (-305oF)
BO422...................... N/S BOLSTER AND PINS................................ 9.95
fax (713) 461-8221
STAINLESS STEEL BLADES & KNIFE KITS
MAXI SKINNER
COMPACT SKINNER BLADE OR KIT
Included in kit- epoxy
and handle material
Available as blade or blade with kit.
The BLADE is 6-1/2” overall in length. It has a 2-3/4” long blade, is 1”
wide and 1/8” thick. This 6A high carbon stainless steel blade comes with
three 1/4” diameter holes for rivets, pins or bolts and a thong hole that is
1/4” in dia. Also has two 1/8” diameter holes for pins in the middle. Flat
ground and polished. A good pick for a small skinner.
The KIT consists of the blade, (2) 1/4” brass pins cut to required length,
Dymondwood handle material that is 3/8” thick x 1-1/2” wide x 5” long
(your choice of color), 30 minute epoxy and instructions to assemble your
knife. The thong hole tubing needs to be ordered separately if you desire
a thong hole. Blade fits SHEATH #4 (not included in kit).
CAT. NO.
ITEM
PRICE
BL431..............BLADE ONLY......................................................... $17.50
BL431C...........BLADE W/CRYO TEMPERING (-305oF)................ 21.00
BL431K...........BLADE KIT.............................................................. 23.95
BL431KC........BLADE KIT W/CRYO TEMPERING (-305oF).......... 27.95
SHE4...............SHEATH.................................................................. 15.95
RADICAL SKINNER
7-7/16” overall length, 3-1/4” long blade, 3/16” thick, 1-11/16” at widest
point, hollow ground and satin finished. 6A high carbon stainless steel
with three (3)1/4” diameter holes for rods or bolts. Top of blade is single
edge serrated and is very useful when cutting through tendons to separate
joints during skinning operations on game. USE SHEATH #13. Needs a
1-3/4” wide handle.
CAT. NO.
ITEM
PRICE
BL444..................... BLADE ONLY................................................. $20.95
TEMPERING (-305oF)
SHE13.................... SHEATH........................................................... 15.95
Made of high vanaduim stainless steel, 9-7/8” overall length, 5” long
blade, 1-1/4” wide, almost 3/16” thick, with (3) 3/16” diameter holes for
pins or bolts, and holes in front for an optional bolster. Satin finished and
extremely sharp with a very nice false edge ground in the top. No sheath
offered at this time.
CAT. NO.
ITEM
PRICE
BL460...................... BLADE ONLY................................................$39.95
BL460C................... BLADE W/DEEP............................................ 43.45
CRYOGENIC TEMPERING (-305oF)
WHITE TAIL
9-1/8” overall length, 4” long blade, 1-1/4” wide, almost 3/16” thick, nice
false edge too! Satin finished high vanaduim stainless steel with great
edge holding ability, but no tapered tang. FITS SHEATH #2.
CAT. NO.
ITEM
PRICE
BL464..................... BLADE ONLY ................................................$34.95
o
BL464C.................. BLADE W/CRYO TEMPERING (-305 F)......... 38.45
MINI SKINNER
6” overall length, 2-5/8” long blade, 7/8” wide and almost 1/8” thick. Slight
false edge, nice hollow ground high vanaduim stainless steel,
5/32” holes for rods and 1/4” for thong. FITS SHEATH #4.
CAT. NO.
ITEM
PRICE
BL465...................... BLADE ONLY................................................. $22.95
BL465C................... BLADE W/CRYO TEMPERING (-305oF)......... 26.45
DROP POINT HUNTER
BIG THICKET HUNTER
9-1/2” overall length, 4-1/2” long blade, 5/32” thick and 1-1/8” maximum
width blade. Now, better than ever with mirror polished, 6A high carbon
super stainless steel blade. Handle is equipped with 6 pinholes that are
1/8” diameter, two 1/4” holes for pins or bolts and same size for a thong
hole. Truly an improved blade. FITS SHEATH #15 as well as guard
GKKGB OR GKKGS.
CAT. NO.
ITEM
PRICE
BL458..................... BLADE ONLY................................................. $20.95
BL458C.................. BLADE W/DEEP............................................... 24.45
SHE15.................... SHEATH........................................................... 15.95
GKKGB.................. BRASS......................................................... 8.95 ea.
GKKGS.................. 303 STAINLESS STEEL............................... 7.95 ea.
Made of 6A high carbon stainless steel, 9-1/4” overall length, 4-3/8” long
blade, 5/32” thick, with (6) 1/8” pin holes and (3) 1/4” pin holes. Mirror
polished and hollow ground. FITS SHEATH # 7 and the guard GKKGB
OR GKKGS below.
CAT. NO.
ITEM
PRICE
BL466...................... BLADE ONLY................................................ $ 20.95
o
BL466C................... BLADE W/CRYO TEMPERING (-305 F)......... 24.45
GUARDS
Guards for BL458 and BL466 are made from
brass or 303 stainless steel. They are already
slotted and drilled with a 1/8” diameter hole
with pin included.
CAT. NO.
ITEM
PRICE
GKKGB.................. BRASS....................................................... $8.95 ea.
GKKGS.................. 303 STAINLESS STEEL............................... 7.95 ea.
fax (713) 461-8221
59
STAINLESS STEEL BLADES
WOODY’S FAVORITE
NEW GUIDES SKINNER
7’ overall length, cutting edge length is 2-5/8”, 5/32” thick and 1” wide blade
with thumb grooves. Really nicely done hollow grind, mirror polished, with
a very clean handle. A good all around drop point skinner blade. Drilled
with 6 holes for pins of 3/32” diameter and a 3/16” thong. Handles need
to be 4” long and 1-1/8” wide to cover. FITS SHEATH #4.
CAT. NO.
ITEM
PRICE
BL475..................... BLADE ONLY................................................. $19.95
BL475C.................. BLADE W/DEEP............................................... 23.45
DEL RIO SKINNER
10” overall length, 5” long blade, 1-1/8” wide and 3/16” thick. Nicely flat
ground and has a good-looking false edge. The handle has a hand fitting
open finger groove pattern that is easy to work out and also fits the hand
very well. The handle pinholes are an over size 3/32” and the thong hole
is 1/4”. Blade material is the famous 6A high carbon stainless steel. FITS
SHEATH #2 or #23.
CAT. NO.
ITEM
PRICE
BL478..................... BLADE ONLY.................................................$19.95
BL478C.................. BLADE W/DEEP...............................................23.45
OTTO’S GRAND SKINNER
8-7/8” overall length, 4-1/4” long blade, 5/32” thick and a full 1” wide. Hollow grind high quality 6A high carbon stainless steel and mirror polished,
with 6 holes for pins of 3/32” diameter and a 1/4” thong hole. Use Guard
#480. FITS SHEATH #2.
CAT. NO.
ITEM
PRICE
BL480..................... BLADE ONLY.................................................$19.95
BL480C.................. BLADE W/DEEP............................................... 23.45
GB480..................... BRASS GUARD WITH PIN................................8.95
GS480..................... 303SS GUARD WITH PIN.................................7.95
BOYS SKINNER
6-1/2” overall length, 2-1/2” cutting length of blade, 3/4” wide, 3/32” thick
blade, 440 stainless steel, hollow grind and satin finished. An excellent
boys knife. 1/8” diameter holes for bolsters and handle pins. FITS SHEATH
#4. Use bolster #481.
CAT. NO.
ITEM
PRICE
BL481C.................. BLADE W/DEEP CRYOGENIC...................... $17.45
TEMPERING (-305oF)
BO481.................... BOLSTER #481- Nickel/Silver with pin............... 6.25
Sold per set of 6 pieces.
60
9-1/2” overall length. The 4-1/4” hollow ground blade is 1-3/16” wide, and
a full 1/8” thick. Made of 440C stainless steel and satin finished. Uses
(6) 3/32” pins or (2) 1/4” rods or bolts. It has a 1/4” thong hole. USES
SHEATH #2. The BO483 bolster set comes with (6) 3/32” N/S pins and
(1) 1/4” N/S thong hole tube.
CAT. NO.
ITEM
PRICE
BL483..................... BLADE ONLY................................................. $21.95
TEMPERING (-305oF)
BO483.................... N/S BOLSTER AND PINS...............................12.95
CANADIAN SKINNER
10” overall length, 5-1/4” long blade, 5/32” thick and hollow ground with
a beautiful satin finish. Super 6A high carbon stainless steel new style
skinner blade. Two holes of 5/32” diameter for SB or BBS bolts or rods
and 1/4” hole for a thong. This one can easily be dressed up with almost
any handle material. FITS SHEATH #18.
CAT. NO.
ITEM
PRICE
BL530..................... BLADE ONLY................................................. $19.95
TEMPERING (-305oF)
SHE18.................... SHEATH...........................................................15.95
RING TAIL SPECIAL BLADE OR KIT
7-5/8” overall length,
3-3/4” long blade, 7/8”
wide and a little over
1/8” thick with a fine
tuned hollow ground
blade. Super 6A high
carbon stainless steel
and a satin finished
drop point. Six 3/32”
diameter holes for
rods and larger hole
is for a 1/4” diameter
thong. Uses Guard
#532/533. The KIT contains blade, guard, pins, Dymondwood scales,
epoxy and instructions. FITS SHEATH # 3.
CAT. NO.
ITEM
PRICE
BL532..................... BLADE ONLY................................................ $20.95
BL532C.................. BLADE W/DEEP.............................................. 24.45
BL532K................... BLADE KIT.......................................................26.95
BL532KC................ BLADE KIT W/CRYO.......................................30.45
GN532/533.............. GUARD – Nickel/Silver with pin.......................9.95
SHE3....................... SHEATH...........................................................15.95
fax (713) 461-8221
BABY CAPE SKINNER
HUNTERS DELIGHT
Cryogenically treated 440C stainless steel 4-1/2” overall length, 2” long
blade which is satin finished and hollow ground, 1” width, 1/8” thick, and
takes (3) 5/32” diameter pins. Don’t let the name or size fool you. It is one
of our smallest knives ever, but it is perfectly capable of getting the job
done. No sheath offered at this time.
CAT. NO.
ITEM
PRICE
BL712C...........................BLADE W/DEEP......................................$12.95
MAVERICK
7-5/8” overall length, 3-1/2” long blade, 7/8” wide and a little over 1/8” thick.
Hollow grind clip point with a nice false edge. Other features are the same
as BL532. Uses Guard #532/533. FITS SHEATH # 3.
CAT. NO.
ITEM
PRICE
BL533.......................... BLADE ONLY............................................ $20.95
BL533C....................... BLADE W/DEEP.......................................... 24.45
GN532/533.................. Guard-Nickel Silver with pin.......................... 9.95
JUDGES FAVORITE BLADE OR KIT
Sample of Blade 543 finished with bolster and Cocobolo handle
9-3/4” overall length, 4-1/2” long blade, 1-3/8” wide, 3/16” thick extra fine
drop point blade. Mirror polished, hollow ground extra-fine 8A stainless
steel with finger grooves and tapered tang. Has terrific edge holding. Use
any of our bolts or 3/16” diameter rods for pins. Thong hole is 1/4” diameter.
USE SHEATH #11. Use bolster #543.
CAT. NO.
ITEM
PRICE
BL543..................... BLADE ONLY ................................................ $29.95
TEMPERING (-305oF)
BO543N................. BOLSTER #543 – pre-drilled with pins............... 9.95
Nickel/silver. Sold per set.
BEAVER SPECIAL
7-1/2” overall length, 3-1/4” long blade, 1-1/8” maximum width, nice looking
blade. Great vanadium stainless steel hollow ground and satin finished to
perfection. All holes are 1/8” diameter. FITS SHEATH #3.
CAT. NO.
ITEM
PRICE
BL535...................... BLADE ONLY................................................. $37.95
BL535C................... BLADE W/DEEP..............................................41.45
SABINE HUNTER
Epoxy and
handle material
included in kit.
Pre-machined
cocobolo scales
available as an
upgrade
The BLADE is 8-3/4” overall length, 4” long blade, 1-1/8” wide, 5/32”
thick, satin finished and hollow ground 6A high carbon stainless steel.
Thumb grooves on top for extra grip and a nice tapered tang. Truly a fine
blade. All of our bolts fit or use 3/16” diameter rods. Thong hole is 1/4”.
Use guard #545.
The KIT consists of the blade, the #545 guard, (2) 3/16” diameter nickel/
silver pins, cut to fit, Dymondwood handle material (3/8” thick x 1-1/2”
wide x 5” long) in your choice of color, 30 minute epoxy and instructions
to assemble your knife. Thong hole tubing needs to be ordered separately
if you desire a thong hole.
Blade fits SHEATH #2.(Not included in kit.)
CAT. NO.
ITEM
PRICE
BL545................BLADE ONLY....................................................... $19.95
BL545C.............BLADE W/CRYO TEMPERING (-305oF)................ 23.45
BL545K.............BLADE KIT............................................................. 31.95
BL545KC..........BLADE KIT W/CRYO TEMPERING (-305oF)......... 35.45
G545..................GUARD #545........................................................... 9.95
BL545COCO.....SET OF COCOBOLO SCALES............................. 19.95
PRE-MACHINED (UPGRADE)
8-5/8” overall length, 4-3/8” long blade, 1/8” thick, and 1” wide satin finished
vanadium stainless steel blade. Bolster holes are 1/8” diameter and tang
holes are 5/32” diameter. Fine looking false edge and great hollow grind
give it a good balance. FITS SHEATH #2.
CAT. NO.
ITEM
PRICE
BL539..................... BLADE ONLY................................................. $39.95
BL539C.................. BLADE W/DEEP............................................... 43.45
TEXAS UTILITY
8-3/4” overall length, 4-1/2” long blade, 7/8” wide, and 1/8” thick. Available
in vanadium stainless steel that is hollow ground with a satin finish. Bolster
holes are 1/8” diameter and tang holes are 5/32” diameter. This is a neat
utility that can double as a steak knife.
CAT. NO.
ITEM
PRICE
BL540...................... BLADE ONLY................................................. $39.95
BL540C................... BLADE W/DEEP..............................................43.45
fax (713) 461-8221
61
GENTLEMAN’S SKINNER
VENTED SKINNER
Cryogenically treated 440C stainless blade. 3-3/4” long blade, 7-3/8”
overall length, 1/8” thick with 1/8” pin holes. Blade is satin finished and
hollow ground. Unique hole in blade makes it light and easy to use. Uses
SHEATH #4
CAT. NO.
ITEM
PRICE
BL704C.................. BLADE W/ DEEP CRYOGENIC.................... $ 14.95
TEMPERING (-305oF)
BLACK HOLE SKINNER
Example of BL706 without bolster and with Spaulted Pecan handle material
6-1/2” overall length and 1/8” thick with 2-1/2” flat ground, satin finished
440C blade. Uses (6) 3/32” pins or (2) 1/4” rods or bolts. It has a 3/16”
thong hole. The (6) N/S pins and 3/16” N/S thong hole tubing come with
the BO706 bolster set. FITS SHEATH #4 AND #16. Use drill size #31.
CAT. NO.
ITEM
PRICE
BL706..................... BLADE ONLY................................................. $21.95
BL706C.................. BLADE W/ DEEP CRYOGENIC....................... 23.45
TEMPERING (-305oF)
BO706.................... N/S BOLSTER AND PINS.................................. 9.95
Cryogenically treated 440C stainless steel. 6-1/8” overall length, 2-1/2” long
blade with top serrations, 1/8” thick. Use 1/8” pins. Satin finished and hollow
ground. Hole ground in handle for easier gripping. Uses SHEATH #4
CAT. NO.
ITEM
PRICE
BL705C.................. BLADE W/ DEEP CRYOGENIC......................$14.95
TEMPERING (-305oF)
WILDCAT SKINNER
COWBOY’S
SKINNER
COWBOY SKINNER
This Wildcat Skinner has a satin finished, hollow ground blade with a thumb
rest and a false edge. It is made from high carbon 6A stainless and is
cryogenically treated for excellent cutting and edge holding attributes. The
pin holes are 1/8” and the thong hole is 3/16”. Overall the blade is 7-1/2”
with a 3” upswept blade and it is .135” thick. Use SHEATH #4.
CAT. NO.
ITEM
PRICE
BL709C.................. BLADE W/ DEEP CRYOGENIC..................... $14.95
TEMPERING (-305oF)
Example of BL724 with Bolster and handle material
A larger version of the Gentleman’s Skinner, this blade is 7-3/4” overall in
length and 1/8” thick with a 3” flat ground blade. The blade is satin finished
440C. Uses (6) 3/32” pins or (2) 1/4” rods or bolts. It has a
5/16” thong hole. The BO724 bolster set consists of (6)3/32” N/S pins
and (1) 5/16” N/S thong hole tubing. FITS SHEATH #3 (deeper fit) or
SHEATH #4. Use drill size #31.
CAT. NO.
ITEM
PRICE
BL724..................... BLADE ONLY................................................. $24.95
BL724C.................. BLADE W/ DEEP CRYOGENIC....................... 28.45
TEMPERING (-305oF)
BO724.................... N/S BOLSTER AND PINS.................................. 9.95
COYOTE SKINNER
PUSH SKINNER
Cryogenically treated 6A high carbon stainless steel. 6-3/4” overall length,
2-3/4” blade, 1/8” thick with 3/16” pin holes and 3/16” thong hole. The blade
is satin finished and hollow ground. Hump back handle design for smooth
skinning action. Use SHEATH #21.
CAT. NO.
ITEM
PRICE
TEMPERING (-305oF)
Cryogenically treated 440C stainless steel, 5-1/2” overall length, 2-7/8”
long blade, 3/32” thick. Use (2) 1/8” pins. Satin finished with top edge
that may vary with either small serrations or a false edge . No sheath
available at this time.
CAT. NO.
ITEM
PRICE
TEMPERING (-305oF)
Cryogenically treated 6A high carbon stainless steel, 7-1/2” overall,
3-1/8” blade, 3/32” thick with 1/8” pin holes, satin finish blade with a hollow grind. Finger grooves for easier holding. Fits SHEATH #4
CAT. NO.
ITEM
PRICE
TEMPERING (-305oF)
62
COWBOY’S
SKINNER
BEARKAT SKINNER
fax (713) 461-8221
SG4TM HUNTING SERIES
LIT’L BADGER
The SG4 fixed blade Series was developed by Darrel Ralph to be
the highest quality kit knife ever attempted for the fixed blade market.
This blade has the most blade grind available in a kit for cutting meat
and hide, and it is tough. Notice the deep hollow grind which helps the
SG4TM excel when slicing.
TM
General Kit Specifications
Blade Steel: AUS-8 stainless steel (Heat Treated to 57-59 rc.) • Blade Finish: 600
Grit Satin Finish • Blade Length: 4.4 inches • Handle Length: 4.49 inches • Overall
Length: 8.86 inches • Pins: Stainless
The SG4TM Modern Bowie tip is great for all types of skinning, camp
chores, digging and most outdoor uses. Use Sheath #3.
The SG4 Drop Point will please the outdoor huntsman. The tip on the
grind is one of the most used in the world. Use Sheath #3
TM
The SG4 Standard model is an excellent skinning tip right out of the
box.You can modify the final grind and tip to your specifications. Use
Sheath #3.
TM
The SG4TM Trailing Point is one of the world’s finest blade configurations
for piercing through animal hide. This tip design will make short work of
skinning large and small animals. Use Sheath #3.
CAT. NO.
BLSG4S
BLSG4SK
BLSG4B
BLSG4BK
BLSG4T
BLSG4TK
BLSG4D
BLSG4DK
SHE3
ITEM PRICE
(1) SG4 TM Standard Base Kit includes blade/bolster
w/pins and thong hole tubing.(no handle material) $34.95/ea.
(1) SG4 TM Standard Complete Kit includes blade/
bolster w/pins, thong hole tubing, 1 set of rough
pre-drilled Cocobolo scales and Epoxy.
47.95/ea.
(1) SG4 TM Bowie Base Kit includes blade/bolster w/
pins and thong hole tubing.(no handle material)
37.95/ea.
(1) SG4 TM Bowie Complete Kit includes blade/
49.95/ea.
(1) SG4 TM Trailing Point Base Kit includes blade/
bolster w/pins and thong hole tubing.(no handle
material)
37.95/ea.
(1) SG4 TM Trailing Point Complete Kit includes
blade/bolster w/pins, thong hole tubing, 1 set of
rough pre-drilled Cocobolo scales and Epoxy.
49.95/ea.
(1) SG4 TM Drop Point Base Kit includes blade/
bolster w/pins and thong hole tubing.(no handle
material)
37.95/ea.
(1) SG4 TM Drop Point Complete Kit includes blade/
49.95/ea.
This sheath fits blade BLSG4S, BLSG4B, BLSG4T,
and BLSG4D.
15.95/ea.
A small blade that can accomplish a lot of little tasks in the kitchen or in
the field. Overall length is 7”, blade length of 2-5/8” and width of 7/8”. The
bolster holes are 3/32”, with (2) 3/16” holes in the handle for pins or bolts,
and a thong hole that is 1/4”. The satin finished blade has been cryogenically treated for edge holding ability.
CAT. NO.
ITEM
PRICE
BL728C................... BLADE W/ CRYOGENIC............................... $14.95
TEMPERING (-305oF)
TOMCAT SKINNER
Stainless steel blade with integrated bolster. Uses 3/16” diameter pinstock
and 1/4” thong hole tubing. The blade is 3-1/4” long with a 7-1/2” overall
length. Cryogenically treated to increase its edge holding properties.
CAT. NO.
ITEM
PRICE
BL713C................... BLADE W/DEEP............................................. $23.95
MODERN SKINNER KIT with BOLSTERS
Example of BLSK1 with giraffe bone handle material.
Modern skinner kit with bolsters, pins and bolts included. The overall length
is 8-1/4”, the blade is 3-1/2” and the thickness is 0.155”. The blade is made
of AUS8 stainless steel and is satin finished. There are (14) 1/8” and (4)
.281 x .250 416SS handle bolts.
CAT. NO.
ITEM
PRICE
BLDRSK1................ BLADE W/DEEP.............................................$37.95
PORK BELLY SKINNER
BIG JOHN’S SKINNER/FIGHTER
A serious hollow ground skinner.made from 440C and cryogenically treated
for extra edge holding. This skinner is satin finished with 3/16” pin holes
and 3/32” bolster/guard holes. The dimensions are 8-1/2” overall with a
4-1/2” long x 1-1/8” wide blade.
CAT. NO.
ITEM
PRICE
TEMPERING (-305oF)
The overall length of the blade is 10-1/4” with a blade that is 4-1/2” in length.
Partial false edge and thumb grooves. Use 3/16” pins and 3/16” thong hole
tubing. Cryogenically treated to increase its edge holding properties.
CAT. NO.
ITEM
PRICE
BL732C................... BLADE W/DEEP............................................. $19.95
fax (713) 461-8221
63
CC4TM Cowboy Classic
BIG BEND SKINNER
Blade only
Blade kit with
handle material
and fasteners.
This kit offers an optional pre-fit, sewn/
riveted, leather sheath with wrap over
button fastening.
The CC4TM Cowboy Classic DP is an 8.5” through-tang, double bolster
design hunter/skinner. It has a high carbon, 420HC stainless steel 4”
blade, which is hollow ground, drop point, and has been heat treated to
56-58 rc. The stacked leather spacer handle is comfortable, and offers
optimal performance when wet, making it a knife of choice for hunters and
fishermen. The butt/guard is aluminum. The red/white/black vulcanized
spacers give the knife character.
CAT. NO.
ITEM PRICE
BLCC4CK.....Parts Kit: Cryo-treated . ...........................................$52.95
Comes with ground and sharpened blade.
Includes fasteners, handle spacers,
leather handle washers, butt, guard and
assembly hardware.
SHECC4........CC4 Leather Sheath....................................................5.95
This elegant, matte finished, drop point BLADE with thumb push is a
sight to behold. Perfect big game blade. It is made of 440 grade stainless,
cryogenically treated for edge holding, hardness is 56-58 RC.The overall
length is 9-1/2”, the blade is 5”, 1/8” thick, and 1-1/2” wide. Pin holes are
3/16”. Select your own handle material or buy the kit. KIT includes blade,
preshaped and drilled quince burl handles and black oxide designer fasteners. You need a T8 torx wrench to install the handles (torx wrench not
included in kit). Use SHEATH #11 or #20.
CAT. NO.
ITEM
PRICE
BLCDP.................... BLADE ONLY W/CRYO TEMP(-305oF)......... $14.95
BLCDPK.................. BLADE KIT W/CRYO TEMP(-305oF)............... 16.95
BIG BEND GUTHOOK
Blade only
Blade kit with
handle material
and fasteners.
PROWLER SKINNER
Stainless steel blade. Uses 1/8” diameter pinstock. The blade is 4-1/2”
long with a 7” overall length. Cryogenically treated to increase its edge
holding properties.
CAT. NO.
ITEM
PRICE
BL730C................... BLADE W/DEEP.............................................$14.95
THE AVENGER
BIG BEND HATCHET
This drop point tactical, stainless steel blade is AUS8 and has an overall
length of 9-1/2”, a blade length of 4-1/2” with 3/16” diameter holes for
pins. Fine satin finish and hollow ground to a fine edge. Cryogenically
treated.
CAT. NO.
ITEM
PRICE
BL731C................... BLADE W/DEEP............................................ $21.95
Downloadable catalog available at
www.texasknife.com
64
Here’s the sportsman’s perfect big game guthook! The BLADE is made
of 440 grade stainless steel, and is cryogenically treated for extra edge
holding. Hardness is 56-58 RC. The overall length is 9-1/2”, the blade is
5” long, 1-1/2” wide, and 1/8” thick. Pin holes are 3/16”. Select your own
handle material or buy the kit. KIT includes blade, preshaped and drilled
indestructible G-10, 2 color, blue and black preshaped handles, and black
oxide designer fasteners. You need a T8 torx wrench to install the handles
(torx wrench not included in kit). Use SHEATH #11
CAT. NO.
ITEM
PRICE
BLCGH.................... BLADE ONLY W/CRYO TEMP(-305oF)......... $14.95
BLCGHK................. BLADE KIT W/CRYO TEMP(-305oF)............... 16.95
Hatchet kit with handle
material and fasteners.
This sturdy, stainless HATCHET is matte finished. The overall length is
9-5/8”, the blade face is 2-3/4”, 3/16” thick. Pin holes are 3/16”. Select your
own handle material or buy the kit. KIT includes hatchet blade, preshaped
and drilled quince burl handles and black oxide designer fasteners. Takes a
T8 torx wrench to install the handles (torx wrench not included in kit). Made
from 440 grade stainless, cryogenically treated, hardness is 56-58 RC.
CAT. NO.
ITEM
PRICE
BLCH01.................. HATCHET ONLY W/CRYO TEMP(-305oF).... $17.95
BLCH01K................ HATCHET KIT W/CRYO TEMP(-305oF).......... 21.95
SHE25..................... SHEATH FOR BLCH01.................................... 19.95
fax (713) 461-8221
KYDEX SHEATH MATERIAL
THE INTRUDER
Tactical 5-1/2” satin finished blade
with overall length of 11” and a
thickness of 0.177”. Comes with
stainless steel guard and endcap
with Phillips head tang nut. A handsome black leather sheath and a
sharpening stone are included. The
sheath has a special pocket for the
sharpening stone so you always
have it handy.
CAT. NO.
ITEM
PRICE
BL210...................... BLADE KIT..................................................... $39.95
BL210C................... BLADE KIT WITH CRYO................................. 43.45
BISON BOWIE WITH SHEATH & GUARD
Kydex is a tough sheath making material. It is waterproof and does not stain, shrink,
rot or lose it’s color or shape. It is heat formed and available in black. It comes in
.060” or .090” thicknesses. The instructions for forming the Kydex will be enclosed
with your order. We stock this material as a one (1) square foot sheet (12” x 12”) or
two (2) square foot sheet (12” x 24”). Larger sections are also available. Please let
us know which size you would prefer.
CAT. NO.
ITEM
PRICE/SQ.FT
KYDEX1...................... .060” Thick...................................................$6.50
KYDEX2...................... .090” Thick.....................................................8.50
KYDEX EYELETS
Available in nickel plated, black painted, or brass. The 1/8” eyelet (used for .60”
Kydex) has a height of 0.197”, ID is 0.125”, OD is 0.144”. The 1/4” eyelet (used for
.60” or .90” Kydex) has a height of 0.256”, ID is 0.241”, OD is 0.261”.
CAT. NO.
ITEM
PRICE/PKG.
KYDEYE1........... EYELET BLACK- SMALL 1/8” dia. hole (50/pkg.).................$2.25
KYDEYE2........... EYELET BLACK- LARGE 1/4” dia. hole (20/pkg.)...................1.75
KYDEYE3........... EYELET SILVER- SMALL 1/8” dia. hole (50/pkg.)...................2.25
KYDEYE4........... EYELET SILVER- LARGE 1/4” dia. hole (20/pkg.)..................1.75
KYDEYE5........... EYELET BRASS- SMALL 1/8” dia. hole (50/pkg.)...................2.25
KYDEYE6........... EYELET BRASS- LARGE 1/4” dia. hole (20/pkg.)..................1.75
SNAPSETTERS
snapset1
snapset2
This bowie, sheath and guard come as a set. The blade has an overall
length of 14-3/4”. The blade is 9-1/2” long and is satin finished and hollow
ground. It is 0.20” thick. The hidden tang is 5” and has an optional pinhole
which will take a 3/16” pin. The guard is satin finished brass and is 3” long
x 3/4” wide x 0.183” thick. The economical fabric sheath is black nylon.
CAT. NO.
ITEM
PRICE
BL211...................... BLADE, SHEATH & GUARD KIT....................$39.95
DELTA FORCE FIGHTER
This setter consists of 1 setter pouch and 1 anvil designed to set the snaps sold with our leather sheaths and
kydex eyelets.The anvil has a concave side and a flat side.
SNAPSET1 is for the 1/8” kydex eyelets & leather sheath
snap sets. SNAPSET2 is for the 1/4” kydex eyelets.
CAT. NO.
ITEM
PRICE
SNAPSET1................... Snapsetter.................................................$6.95
SNAPSET2................... Snapsetter...................................................7.95
KYDEX-CONCEALEX SHEATH
MOLDING PRESS
Example of BL725C with cord wrapped handle.
A sleek looking fighter made of 3/16” 440C stainless steel that has been cryogenically tempered.
The overall length is 9-1/2” and the cutting edge is
4-7/8” with a 1-1/8” wide blade. There is an upper
3-1/2” false edge and a cross guard. The pin holes
are 1/4” and the thong hole is 1/4”. The blade looks
nice with the green or black canvas Micarta scales.
See Kydex for sheath material.
CAT. NO.
ITEM
PRICE
BL725C................... BLADE W/DEEP............................................. $27.95
Drop Ship Only
This 12” x 8” or 24” x 8” kydex-concealex sheath maker is built from rugged
1/4” steel plate. The professional forming system is perfect for making
either flat-faced (one-sided), or a full fold-over (wrapped style) sheaths.
The top plate is removable for height adjustment. Footer holes are predrilled so that the press can be mounted to a bench.
CAT. NO.
ITEM
PRICE/EA
KKSMP-12.............. Sheath Molding (12” x 8”)..............................$99.95
KKSMP-24.............. Sheath Molding (24” x 8”)..............................159.95
fax (713) 461-8221
65
BOOT BLADE
PROFESSIONAL GUTHOOK WITH BOLSTER
7-1/2” overall length, 3-1/2” long blade, mirror polished, 6A high carbon,
stainless steel blade. There are 6 pinholes that are 1/8” diameter and (2)
1/4” holes for pins or bolts. This is a very nice looking boot knife blade.
CAT. NO.
ITEM
PRICE
BL459 . ................... BLADE ONLY ............................................... $19.95
BL459C................... BLADE W/DEEP.............................................. 21.50
8-1/4” overall length, 3-3/4” long blade, 1” wide and 1/8” thick. Beautiful
hollow ground blade and very highly polished and has a seration at the end
of the cuttiing edge. The integral BOLSTER is very nice looking and saves
you the work of putting the bolster on. It has 1/8” pin holes and a 3/16”
thong hole. Blade made of 440C stainless steel. FITS SHEATH # 21.
HEART DAGGER
CAT. NO.
ITEM
PRICE
BL144..................... BLADE ONLY................................................. $27.95
TEMPERING (-305oF)
Cryogenically treated 440C stainless steel blade. 6-1/4” overall length,
1/8” thick with 3-3/4” blade. Use 3/32” pins. Satin finished with a dainty
heart cut out which makes it appealing to women. No sheath available
at this time.
CAT. NO.
ITEM
PRICE
TEMPERING (-305oF)
MEDIUM GUTHOOK SKINNER
THUNDERCAT DAGGER
This double eye dagger is a unique tactical or art dagger. It has double
thumb push ridges for tactical use and 3/16” pin holes. It is cryogenically
treated 440C stainless steel, with a 10” overall length, 1/8” thickness with
a 4-1/2” blade that has a fine matte finish. Use 3/32” pins.
CAT. NO.
ITEM
PRICE
TEMPERING (-305oF)
The overall length is 7-3/4”. The 440 stainless, hollow ground, satin
finished blade has a 3” cutting length and is 1-3/16” wide and .140 thick.
Hardness 57-59 rc. There a 3 holes for 5/32” pins. Fits SHEATH #3. Use
bolster #484.
CAT. NO.
ITEM
PRICE
BL484C.................. BLADE W/DEEP.............................................$26.95
BO484..................... Nickel/Silver with pin..........................................5.95
Sold per set of 3 pieces
STAINLESS GUTHOOK
GOLIATH’S DAGGER
13-1/2” overall length, 1-1/8” wide, 8-3/4” long blade and almost 3/16”
thick. The blade is both hollow ground and mirror polished. Fine 6A high
carbon stainless steel. Threads are 1/4-20.
CAT. NO.
ITEM
PRICE
BL456................BLADE ONLY....................................................... $25.95
BL456C.............BLADE W/DEEP CRYO TEMP (-305oF)............... 29.45
REBEL TANTO
9” in overall length, 3-3/4” long blade, 3/16” thick highly polished, 6A high
carbon stainless steel. A beautiful hollow ground blade with a handle that
will fit almost every hand. The pinholes are 1/8” diameter and the thong
hole is 1/4” in diameter. FITS SHEATH #11.
CAT. NO.
ITEM
PRICE
BL450..................... BLADE ONLY................................................. $25.95
TEMPERING (-305oF)
SLIM LINED GUTHOOK
11” overall length, 6-1/2” blade, 1-1/8” wide, just under 3/16” thick,
tapered tang, great hollow grind and nice satin finished super 6A high
carbon stainless steel. Two 3/16” diameter holes for SB bolts or rods.
Use Bolster #534.
CAT. NO.
ITEM
PRICE
BL534................BLADE ONLY....................................................... $27.95
BL534C.............BLADE W/DEEP CRYO TEMP (-305oF)............... 31.45
BO534N............BOLSTER #534 – pre-drilled with pin................ 6.50/set
66
Cryogenically treated, 440C blade, 7-3/8” overall length and 1/8” thick with
3-1/2” blade. Use 1/8” pins.
CAT. NO.
ITEM
PRICE
BL703C.................. BLADE W/ CRYO............................................$14.95
TEMPERING (-305oF)
fax (713) 461-8221
LITTLE CLIP POINT
5” TRADITIONAL CLIP POINT SKINNER
7-3/4” overall length, 4” long blade, 13/16” at widest point, nice false edge
on clip point, hollow ground with satin finish. FITS SHEATH #4.
CAT. NO.
ITEM
PRICE
BL454 . .................. BLADE ONLY................................................ $24.95
BL454C ................. BLADE W/DEEP CRYOGENIC....................... 28.45
TEMPERING (-305oF) 10” overall length, full 1” wide. Satin finished and hollow ground for strength.
Made of high vanadium stainless steal. FITS SHEATH #8.
CAT. NO.
ITEM
PRICE
BL498...................... BLADE ONLY................................................. $26.95
TEMPERING (-305oF)
WATER DAWG
DELUXE SKINNER
7-3/4” overall length, 4-1/8” long blade, 1/8” thick, satin finished, hollow
ground blade.
CAT. NO.
ITEM
PRICE
TEMPERING (-305oF)
9-1/8” overall length, 4-1/2” long blade, 1-3/16” wide, 5/32” thick, mirror
polished 6A high carbon stainless steel. Hollow ground to perfection. TANG
NUT #2, FITS SHEATH #8.
CAT. NO.
ITEM
PRICE
BL525...................... BLADE ONLY................................................ $19.95
BL525C................... BLADE W/DEEP.............................................. 23.45
CAJUN SKINNER
COLORADO SKINNER
8-1/2” overall length, 4-1/4” blade, 15/16” maximum width, 5/32” thick and
nice thumb grooves. Highly polished 6A high carbon stainless steel and
hollow ground blade. GUARD should be GHKG. Takes 5/32” pin material.
TANG NUT #2 AND FITS SHEATH #15.
CAT. NO.
ITEM
PRICE
BL455..................... BLADE ONLY................................................. $18.95
TEMPERING (-305oF)
GUTHOOK
10-5/8” overall length, 5/32” thick, 5-1/2” blade, 1-3/16” wide with thumb
grooves. Hollow ground from the preferred 6A high carbon super stainless
steel and mirror polished. TANG NUT #2, SHEATH #10, AND GUARD
GHKG.
CAT. NO.
ITEM
PRICE
BL528 . ................... BLADE ONLY..................................................$19.95
BL528C................... BLADE W/DEEP CRYOGENIC........................23.45
TEMPERING (-305oF)
TOP SKINNER
A hidden tang guthook, 8-3/4” overall length, 4-1/4” long blade, 5/32”
thick, and maximum width 1-1/4” at hook. Made of the finest stainless
steel. Hollow ground and mirror polished to perfection. TANG NUT #2,
SHEATH #7 FITS.
CAT. NO.
ITEM
PRICE
BL527............. BLADE ONLY.......................................................... $20.95
BL527C.......... BLADE W/ CRYOGENIC TEMPERING (-305oF)...... 24.45
6” TRADITIONAL CLIP POINT SKINNER
11-3/4” overall length, 6-1/4” long blade, 1-1/8” wide. Satin finished high
vanadium stainless steel nicely hollow ground. A fine looking blade. FITS
SHEATH #9.
CAT. NO.
ITEM
PRICE
BL490...................... BLADE ONLY................................................. $28.95
TEMPERING (-305oF)
9-1/8” overall length, 5/32” thick, 4-1/2” blade, 1-3/16” wide, 5/32” thick,
mirror polished 6A high carbon stainless steel. Hollow ground to perfection. TANG NUT #2 AND FITS SHEATH #8.
CAT. NO.
ITEM
PRICE
BL452...................... BLADE ONLY..................................................$19.95
TEMPERING (-305oF)
LITTLE CIMMARON
7-5/8” overall length, 2-5/8” long blade, 5/32” thick and 7/8” wide mirror
polished and hollow ground blade. Nicely designed, small skinner blade of
fine 6A stainless steel. TANG NUT #2 AND FITS SHEATH #4.
CAT. NO.
ITEM
PRICE
BL542...................... BLADE ONLY..................................................$17.95
TEMPERING(-305oF)
fax (713) 461-8221
67
BOWIE BLADES
ALASKA BOWIE
RIO GRANDE BOWIE
This fine looking Bowie blade is 11-3/4” overall with an 8-1/2” blade edge.
It is very heavy. The cryogenically treated stainless blade is made from
1/4” 440C. We would suggest the lugged guard, GNLG or the crowned
guard, GNCG. Also, the blade looks very nice with the Bowie/Dagger
guard, G145 or G146 or you can use GBGL. No sheath available.
CAT. NO.
ITEM
PRICE
TEMPERING (-305F)
GNLG2B................ BRASS LUGGED GUARD............................... 14.95
GNCG2B................ BRASS CROWNED GUARD........................... 14.95
GNLG2B
13-3/4” overall length, 8-3/4” long blade, 1-1/2” wide, and 5/32” thick and
beautifully hollow ground. Satin finished high vanadium stainless steel as
above with a great looking 3-3/4” false edge.
CAT. NO.
ITEM
PRICE
BL463..................... BLADE ONLY................................................ $45.95
TEMPERING (-305F)
SHORT BOWIE
12” overall length, 7” long blade, 1-7/16” wide. Short and stout, and almost a quarter inch thick. Nice 3-1/2” false edge looks good and is well
balanced. Satin finished high vanadium stainless steel and nicely hollow
ground. Sometimes the blade comes in with blood grooves and sometimes
without. If you prefer the grooves, please check on availability.
CAT. NO.
ITEM
PRICE
BL499..................... BLADE ONLY................................................. $41.95
TEMPERING (-305F)
GNCG2B
TEXAS BOWIE
MOUNTAIN MAN MAMMOTH BOWIE
GBGL (Available in brass or nickel-silver.)
15-1/8” overall length, 10-1/8” long blade, 1-5/8” wide, highly polished 6A
high carbon stainless steel. Blade is flat ground with a really nice false
edge. Tang is full thickness and nicely fits the hand. Holes for rods or SB
bolts are 5/32” diameter and thong hole is 1/4” diameter. FITS SHEATH
#14. Use Guard GBGL.
CAT. NO.
ITEM
PRICE
BL471..................... BLADE ONLY................................................. $39.95
TEMPERING(-305F)
GBGLBR................ GUARD (BRASS)............................................. 15.95
CLASIC BOWIE BLADE (SOLIGEN CARBON)
11-3/4” overall length, 7-1/4” long blade, 3/16” thick, 1-1/4” wide, satin
finished, 4” long false edge, tang threaded 10/24, a really beautiful blade.
Makes up into a traditional looking Bowie with pleasing lines.
CAT. NO.
ITEM
PRICE
BL137..................... BLADE ONLY................................................. $29.95
GBGL (Available in brass or nickelsilver.)
15-1/2” overall length, 10” long blade, 2-1/16” maximum width, 3/16” thick
with a long clip point. Nicely satin finish, flat ground, Soligen high carbon
stainless steel. Guard GBGL slides on for a good fit. Needs 5-1/4” long
handles or use a 1/4” wide spacer behind the guard and then 5” handles
will fit. Plenty of 5/32” diameter holes for pins or the SB bolts will fit.Use
Guard GBGL or you can use any of our lugged and crowned guards such
as GNCG OR GNLG. (Note: All of the guards need to be filed to the correct size.) FITS SHEATH #14.
CAT. NO.
ITEM
PRICE
BL148...................... BLADE ONLY................................................. $84.95
TEMPERING (-305F)
GBGLBR................. GUARD (BRASS)........................................... 15.95
JIM’S BOWIE
GB720
68
GN720
This bowie is a very popular style. It is made from 440C stainless. 13”
overall length, 8” blade, 1-1/2” wide, 5/32” thick, 1/8” pinholes.
Use guard GB720 or GN720. The guard is 4” long, 3/4” wide, and 1/4”
thick. Guard comes in brass or nickel-silver.
CAT. NO.
ITEM
PRICE
BL720...................... BLADE ONLY................................................. $39.95
TEMPERING (-305F)
GB720..................... GUARD (BRASS)............................................... 9.95
GN720..................... GUARD (NICKEL-SILVER).............................. 15.95
fax (713) 461-8221
ATS34 STAINLESS STEEL BLADES
ATS34 STAINLESS STEEL
DAMASCUS BLADES
The photos do not do these blades justice. The detail is fine and
consistent. They are professionally hand ground and are available in 4
blade patterns. Each blade is available in ATS34 Stainless Damascus.
Blade tangs are made from 440C. The blades have been cryogenically
treated and double tempered.
CARBON DAMASCUS BLADES
Professionally hand ground out of 1075 and nickel, right here in
the USA.
UPSWEEP SKINNER
BIRD & TROUT
Incredible, upsweep skinner. 3” blade, 5/32” thick, 7-5/8” long, twist pattern
only, takes 5/32” pin material. FITS SHEATH #4.
CAT. NO.
ITEM
PRICE
BLTF9...................... CARBON DAMASCUS BLADE .................... $84.95
CITATION
8-1/4” overall length, 11/16” wide, 1/8” thick, and a really nice 4” long blade.
Nicely tapered tang with 1/8” holes for pins. FITS SHEATH #3.
TWIST, LADDER, OR RAINDROP
CAT. NO.
ITEM
PRICE
BL551SD................. ATS34 STAINLESS DAMASCUS................ $185.00
WESTERN HUNTER
Awesome, bullnose skinner. 3-1/8” blade, 5/32” thick, 7-3/4” long, twist
pattern only, takes 5/32” pin material. FITS SHEATH #3.
CAT. NO.
ITEM
PRICE
BLTF10.................... CARBON DAMASCUS BLADE .................... $84.95
LIBERATOR
8-3/4” overall length, 1” wide, 1/8” thick, nice 4” long hollow ground drop
point blade. Tapered tang with 1/8” holes. FITS SHEATH #3.
CAT. NO.
ITEM
PRICE
SHORT AND SWEET
Excellent drop point hunter. 3-1/2” blade, 5/32” thick, 7-3/4” long, twist
pattern only, takes 5/32” pin material. FITS SHEATH #11 OR #21.
CAT. NO.
ITEM
PRICE
BLTF11.................... CARBON DAMASCUS BLADE .................... $94.95
CLASSIC DAGGER
7-7/8” overall length, 1” wide, 1/8” thick, nice 3-1/4” long hollow ground
blade. Truly superb. Tapered tang with 1/8” holes. FITS SHEATH #3.
CAT. NO.
ITEM
PRICE
BASIC DAMASCUS
with Ed Caffrey, A.B.S. Mastersmith
Watch as ABS Mastersmith Ed Caffrey shows you how to
get solid results with your Damascus billets. He will show
you processes that will allow you to make one good blade
after another. Includes stock removal methods and tips
on etching. Ed shows you refined techniques for creating
bird’s eye pattern, a ladder pattern, a twist pattern, and a
random pattern. Color, 83 min.
CAT. NO.
ITEM
PRICE
DVD9....................... DVD...........................$35.00
This is a beautiful, classic dagger. 5-1/2” blade, 1” wide, 9-1/2” overall,
twist pattern only.
CAT. NO.
ITEM
PRICE
BLSD11................... CARBON DAMASCUS BLADE .................. $102.95
Knifemaking Tutorials
at www.texasknife.com
For those that are new to knifemaking, or if you
want to learn something new go to our website.
Look under Information/Projects and follow
the directions to learn more about knifemaking
from the professionals.
fax (713) 461-8221
69
USA DAMASCUS BLADES
These blades are made right here in the USA. They are beautifully hand forged out of 1075 and 15n20 hi-carbon
steel. All blades are heat treated, etched and polished. Customize these works of art with only the application of
handle material and some file work if desired. Tangs are welded on mild steel, great for file work. Blades are made
one at a time so no two are alike.
THE BOSS
HUDSON BAY
7-1/2” overall, 1” width, thickness 3/16”, pin size 5/32”. Ladder pattern
shown. FITS SHEATH #4.
CAT. NO.
ITEM
PRICE
BLF25T...................TWIST PATTERN........................................... $79.95
BLF25L...................LADDER PATTERN....................................... 103.95
6-1/2” overall, 7/8” width, thickness 5/32” approx., pin size 5/32”.
FITS SHEATH #6 OR #16.
CAT. NO.
ITEM
PRICE
BLF41.....................TWIST PATTERN........................................... $49.95
THUNDERBOLT DAGGER
BIG CHIEF
CAT. NO.
ITEM
PRICE
BLSD5.....................TWIST PATTERN........................................... $74.95
7-1/4” overall, 1” width, thickness 5/32”, pin size 1/8”. FITS SHEATH #4.
CAT. NO.
ITEM
PRICE
RASCAL
THE CHAMP
4-3/4” overall, 5/8” width, thickness 1/8”.
CAT. NO.
ITEM
PRICE
BLS49.....................TWIST PATTERN........................................... $31.95
ROGUE
7-1/8” overall, 7/8” width, thickness 5/32”, pin size 1/8”. FITS SHEATH #16.
CAT. NO.
ITEM
PRICE
BLF21.....................TWIST PATTERN.......................................... $57.95
GUARDIAN
4” overall, 1/2” width, thickness 1/8”.
CAT. NO.
ITEM
PRICE
SWEET REWARD
FITS SHEATH #16
CAT. NO.
ITEM
PRICE
70
3-3/4” overall, 1/2” width, 1/8” thickness.
CAT. NO.
ITEM
PRICE
fax (713) 461-8221
PATHFINDER
OLD TIMER
2-1/2” blade, 6-1/8” overall, 1-1/8” wide, 5/32” thick. Use 1/8” pin stock.
2-3/4” blade, 6-1/2” overall, 1” wide, .150” thick. Use 1/8” pin stock.
CAT. NO.
ITEM
PRICE
BLF61Z............................... ZEBRA PATTERN.............................. $79.95
BLF61V............................... VOODOO PATTERN........................... 79.95
CAT. NO.
ITEM
PRICE
BLF63Z............................... ZEBRA PATTERN............................ $109.95
BLF63V............................... VOODOO PATTERN......................... 109.95
PATRIOT
FIRST RESPONDER
3-1/4” blade, 7-1/8” overall, 5/8” wide, .135” thick. Use 1/8” pin stock.
CAT. NO.
ITEM
PRICE
BLF65Z............................... ZEBRA PATTERN.............................. $89.95
BLF65V............................... VOODOO PATTERN........................... 89.95
2-5/8” blade, 8” overall, 1-1/8” wide, .150” thick. Use 1/8” pin stock.
FITS SHEATH #3.
CAT. NO.
ITEM
PRICE
BLF66Z............................... ZEBRA PATTERN............................ $119.95
BLF66V............................... VOODOO PATTERN......................... 119.95
DESERT IRONWOOD EXHIBITION GRADE
POLYESTER PEARL
Ironwood is one of our favorite choices to compliment these beautiflul
Damascus blades. There are two grades of Ironwood, Select 1 and Select
2. Select 2 has more pattern and grain than Select 1. It’s your choice.
BLACK CHERRY
WOASE2-Select 2
WOASE1-Select 1
These are examples only. Patterns vary.
CAT. NO.
ITEM
PRICE
WOASE1S........................ SCALES............................................... $25.00
WOASE1B........................ BLOCKS................................................ 25.00
WOASE2S........................ SCALES................................................. 40.00
WOASE2B........................ BLOCKS................................................ 40.00
EMERALD GREEN
ANTIQUE GOLD
PURPLE PASSION
This material is pure polyester and it comes in beautiful colors and looks
similar to mother of pearl. It gives an elegant look to any Damascus blade
and looks nice with a white spacer placed underneath. It polishes with
Jackson 51 white rouge.
Four colors of polyester pearl are featured on this page. For more colors
see page 16 of the catalog. Black cherry and purple passion also come in
cylinders for the hidden tang knives. Cylinders are 1-1/2” in diameter and
4-1/2” long. The scales are 1-1/2” wide x 5” long x 3/8” thick.
CAT. NO.
ITEM
SIZE
PRICE
POL10S......... BLACK CHERRY SCALES............... 3/8” thick............... $8.95
POL10C-4..... BLACK CHERRY CYLINDER............ 4-1/2” long............. 10.95
POL14S......... EMERALD GREEN SCALES.............. 3/8” thick................. 8.95
POL20S......... ANTIQUE GOLD SCALES................ 3/8” thick................. 8.95
POL22S......... PURPLE PASSION SCALES............ 3/8” thick................. 8.95
POL22C-4..... PURPLE PASSION CYLINDER......... 4-1/2” long............. 10.95
fax (713) 461-8221
71
Camp & Kitchen
SANTOKU BLADES WITH INDENTATIONS
TRADITIONAL CHEF’S CHOPPER BLADE
13” overall length, 8” blade, 1-7/8” wide, 440C stainless steel, hollow
ground, highly polished, sharpened to a fine edge.
CAT. NO.
ITEM
PRICE
BL575C................... BLADE W/CRYO (-305F).............................. $17.45
Slice, dice, chop and cut with our new line of Santoku style kitchen
blades. These AUS8 stainless steel blades have been cryogenically
treated to improve edge holding. They have indentations on both sides
of the blade to reduce friction for more efficient cutting and to keep
particles of food from sticking to the blade when cutting fruits and
vegetables. All three blades will make a nice set to make for yourself or
someone else.
BL590C
TRADITIONAL 8” CARVING BLADE
BL591C
12-3/4” overall, 8” long blade. Three holes take 5/32” pin material, 440C
stainless steel, hollow ground and highly polished.
CAT. NO.
ITEM
PRICE
BL582C................... BLADE W/CRYO (-305F)............................... $13.95
TRADITIONAL CARVING FORK
BL592C
SANTOKU CHEF BL592C
The blade dimensions of the Chef are: 11-3/4” overall, 7” blade length,
0.095” thick. Use 1/8” pins for all holes or 7/32” Mosaic Pin for center
hole.
SANTOKU MID-SIZE BL591C
11-3/4” overall, 7/8” wide fork. Great BBQ fork. 440C stainless steel, highly
polished. Takes 5/32” pin material.
CAT. NO.
ITEM
PRICE
BL583.........................FORK ONLY................................................ $13.95
TRADTIONAL COOK’S BLADE
The blade dimensions of the Mid-Size are: 9” overall, 5” blade length,
0.056” thick. Use 1/8” pins for all holes or 7/32” Mosaic Pin for center
hole.
SANTOKU MINI BL590C
The blade dimensions of the Chef are: 7” overall, 3” blade length, 0.056”
thick. Use 1/8” pins for all holes or 7/32” Mosaic Pin for center hole.
CAT. NO.
ITEM
PRICE
BL590C................... MINI BLADE W/CRYO (-305F)...................... $11.95
BL591C................... MID-SIZE W/CRYO (-305F)............................. 14.95
BL592C................... CHEF BLADE W/CRYO (-305F)...................... 17.95
8” overall, 4” blade, 3 holes take 3/32” pin material. Made of 440C stainless
steel. Hollow ground and highly polished.
CAT. NO.
ITEM
PRICE
BL581C......................BLADE W/CRYO (-305F).............................. $6.95
SUPER CHEF’S BLADE
diamondstone 2-stage
This sharpener is a quick and
easy way to sharpen your kitchen
knives. Diamond and ceramic
stones. The ceramic stones sharpen and hone and the white stones
give a finishing polish.
CAT. NO.
PRICE
DS2.................................. $25.95
10” blade, 14-1/2” overall, 2” wide, satin finished, hollow ground, 440C
stainless steel. 5/32” holes for pin material.
CAT. NO.
ITEM
PRICE
BL576C......................BLADE W/CRYO (-305F)............................ $21.45
FAVORITE CHEF’S SANTOKU WITH STRAIGHT EDGE
SUPER CHEF’S CARVER BLADE
12-3/4” overall length, 8” blade 1-1/16” wide, satin finished. 5/32” holes
for pin material.
CAT. NO.
ITEM
PRICE
BL577C......................BLADE W/CRYO (-305F)............................ $18.95
72
This blade is a great addition to your set of kitchen knives. It is used most
frequently for chopping, slicing, and dicing of fruits and vegetables. The
blade dimensions of the Chef are: 10-3/4” overall, 6” blade length. Use
5/32” pins for all holes. The blade is made of 8A high carbon stainless and
has been cryogenically treated.
CAT. NO.
ITEM
PRICE
BL547C................... BLADE W/CRYO............................................ $15.95
fax (713) 461-8221
FAVORITE COOK’S BLADES
Camp & Kitchen
STEAK BLADE
Sample of Blade 529 finished with Spalted Maple Burl handle
Voted best kitchen blades by the staff at Texas Knifemaker’s.
9” overall length, 4-3/4” blade, 5/8” wide and 1/16” thick,
satin finished blade with 2-1/2” of serrations at the tip.
Handle holes are for 1/8” pins with a larger center hole and
end slot for easy assembly. A great stainles steel steak knife
blade. Buy a dozen and save.
CAT. NO.
ITEM
PRICE
BL477.................BLADE ONLY.......................... $5.25/EA.
BL477C..............BLADE W/CRYO (-305F).......... 8.75/EA.
BL477DOZ.........BLADES ONLY..................... 55.00/DOZ.
BL477DOZC......BLADES W/CRYO (-305F)... 97.00/DOZ.
BL529 FAVORITE COOK’S
BL531 FAVORITE MID SIZE CHEF
UTILITY/BONING BLADE
BL476 FAVORITE UTILITY PARING
FAVORITE COOK’S
12-1/4” overall length, 3/32” thick, 1-5/8” wide and a 7-3/4” blade. Fine satin finish and
flat ground superior 8A high carbon stainless steel. Holes in handle are for three 5/32”
diameter pins or two large holes for bolts.
CAT. NO.
ITEM
PRICE
BL529...................................... BLADE ONLY........................................................ $15.95
BL529C................................... BLADE W/ CRYO (-305F)....................................... 19.45
FAVORITE MID-SIZE CHEF
10-1/2” overall length, 6” blade, 1-3/8” wide maximum. Three holes for 5/32” pin material
and two larger holes for bolts.
CAT. NO.
ITEM
PRICE
BL531...................................... BLADE ONLY........................................................ $13.95
BL531C................................... BLADE W/CRYO (-305F)........................................ 17.45
6” long blade, 3/32” thick with three 5/32” diameter holes
for pins. Satin finished and hollow ground.
CAT. NO.
ITEM
PRICE
BLSUB6C...........BLADE W/CRYO (-305F)..............$19.45
CLIP POINT PARING BLADE
FAVORITE UTILITY PARING
7-1/2” overall length, 7/8” wide, 3-1/2” long blade and 1/16” thick 440 stainless steel.
Fine satin finish. The handle is punched with holes for three 1/8” pins and two larger
holes for bolts.
CAT. NO.
ITEM
PRICE
BL476.......................................BLADE ONLY......................................................... $8.95
BL476C....................................BLADE W/CRYO (-305F)....................................... 12.45
CHEF/COOKS KNIFE BLADE
CAT. NO.
ITEM
PRICE
BLSCP3............ BLADE ONLY.................................$11.95
BLSCP3C...........BLADE W/CRYO (-305F)............... 15.45
3” PARING BLADE
This blade has an overall length of 13-1/4” with a blade length of 8”. It is 3/32” thick with
three 5/32” diameter holes for pins. Satin finished and flat ground.
CAT. NO.
ITEM
PRICE
BLSCK8...................................BLADE ONLY....................................................... $23.95
BLSCK8C.................................BLADE W/CRYO (-305F)....................................... 27.45
CAT. NO.
ITEM
PRICE
BLSSP3.............BLADE ONLY................................$11.95
BLSSP3C.......... BLADE W/CRYO (-305F).................15.45
SLICER/CARVER BLADE
UTILITY/STEAK BLADE
9” long blade, 3/32” thick with three 5/32” diameter holes for pins. Satin finished and
hollow ground.
CAT. NO.
ITEM
PRICE
BLSSC9.................................. BLADE ONLY........................................................ $19.95
BLSSC9C................................ BLADE W/CRYO (-305F)........................................ 23.45
CAT. NO.
ITEM
PRICE
BLSUS4.............BLADE ONLY................................$11.95
BLSUS4C...........BLADE W/CRYO (-305F)............... 15.45
fax (713) 461-8221
73
440 STAINLESS STEEL BLADES
COMPETITION COOK-OFF LARGE CHEF’S BLADE
COMPETITION COOK-OFF BLADES
These blades are of superior quality and are made of
440C stainless steel. The handle of the Competition
blades fits the shape of your hand for maximum comfort.
The blades are satin finished. They are cryogenically
treated, which increases their edge holding. Plus, they
are sharpened and ready for you to customize with your
choice of handle material.
COMPETITION COOK-OFF
STEAK BLADE
Camp & Kitchen
This blade is 14” overall with a 8-1/16” X 2” blade. The pinholes take 5/32” pin material. Cryogenically treated.
CAT.NO.
ITEM
PRICE
BL584C................... BLADE W/CRYO (-305F).................................................$17.95
COMPETITION COOK-OFF SMALL CHEF’S BLADE
This steak blade has a 2” false edge. Use 1/8” pin material for
the pinholes. The blade is 4-7/16” long X 11/16” wide, and the
knife is 8-3/4” overall. Cryogenically treated.
The blade is satin finished, not serrated and has an overall length of 10-7/8” with a
5-1/2”long X 1-3/8” wide blade. The pinholes take 5/32” pin material. Cryogenically
treated.
CAT.NO.
ITEM
PRICE
BLSK1..................... BLADE W/CRYO (-305F)................$8.95
CAT.NO.
ITEM
PRICE
BL585C................... BLADE W/CRYO (-305F)................................................. $11.95
COMPETITION COOK-OFF PARING BLADE
COMPETITION COOK-OFF
SERRATED CHEF’S BLADE
This is a handy little knife for the kitchen. It is 7-1/8” overall,
with a 3-1/4” X 11/16” blade, and 3 holes for 1/8” pin material.
Satin finished, flat ground, 440C stainless steel. Cryogenically
treated.
CAT.NO.
ITEM
PRICE
BL578C................... BLADE W/CRYO (-305F)............... $8.95
This serrated, satin finished blade is 10-3/4” overall, and the blade length is
5-5/8” long X 1-1/2” wide. The pinholes take 5/32” pin material. Cryogenically
treated.
CAT.NO.
ITEM
PRICE
BL586C................... BLADE W/CRYO (-305F)................................................. $11.95
THE TRAIL RIDER
COMPETITION COOK-OFF CARVER
An oversized steak blade with a substantial handle for cutting
big steaks. This 440C stainless, satin finished, serrated steak
blade is 10-1/4” overall with a 5” blade, 1-1/8” width and 5/32”
pin holes.
CAT.NO.
ITEM
PRICE
BL729C................... BLADE W/CRYO (-305F)............... $8.95
Great BBQ Brisket Knife. 440C stainless steel. The blade is hollow ground, satin
finished. It is 15” overall with a 9-1/4” blade, 3 holes for 5/32” pin material. Cryogenically treated.
CAT.NO.
ITEM
PRICE
BL579C................... BLADE W/CRYO (-305F).................................................$17.95
COMPETITION BREAD SLICING BLADE
COMPETITION CLEAVER
15-1/2’ overall with a 9-1/8” long blade. The blade is 1-1/16” wide and
serrated. Three 5/32” diameter pins will fit the holes. Satin finished and
flat ground. Cryogenically treated. Attention fishermen, try as a stout fillet
knife.
CAT.NO.
ITEM
PRICE
BL587...................... BLADE ONLY................................................ $12.50
BL587C................... BLADE W/CRYO (-305F)................................ 16.00
Stainless. Overall length of 11-3/4” with a 3” wide by 6” long blade and a
1/8” thickness. The hole sizes are: 1 @ 5/32”, 1 @ 1/4”, 1 @ 3/16” x 1/4”.
Satin finished and hollow ground.
CAT.NO.
ITEM
PRICE
BLCLEV.................. BLADE W/CRYO (-305F)............................... $19.95
COMPETITION COOK-OFF FORK
12” overall, 3-5/8” x 1” fork, 3 holes for 5/32” pin material. Satin
finished. 440C stainless steel.
CAT.NO.
ITEM
PRICE
BL580...................... FORK ONLY.....................................$13.95
74
fax (713) 461-8221
440 STAINLESS STEEL BLADES
Camp & Kitchen
TEXAS BBQ FORK
13” overall length, with 5” by 1-1/4” forks, and 5/32” diameter holes for
pins. Perfect for brisket at your next BBQ.
CAT.NO.
ITEM
PRICE
BL708BBQ................ FORK ONLY................................................. $13.95
ARTIC ULU BLADES
Invented by the native Alaskan people over 5000 years ago, the Alaskan
ULU (OO-loo), was used primarily to clean and skin fish. Today, people find
them very useful in the kitchen for cutting and dicing and also out in the
field. Originally the handles were made of bone, ivory or wood inscribed
with distinctive designs, but today many materials are available to use on
the handles. Use your imagination, and make several. We carry two styles
of blades to choose from. They are stainless steel, high carbon, mirror polished blades with 6” cutting edges and oversize 3/16” holes. These blades
have been cryogenically treated to increase their edge holding ability.
COOKS FORK
Large strong tines, 3/32” thick, 10-1/2” overall, 3-3/4” fork length, with four
5/32” diameter holes for pins. Satin finished.
CAT.NO.
ITEM
PRICE
BLFORK.................... FORK ONLY................................................. $16.95
THE HAMMER HAWK
CAT.NO.
ITEM
PRICE
BLULU1.................... FANTAIL BLADE W/DEEP............................. $8.95
o
BLULU2.................... BROADTAIL BLADE W/DEEP......................... 8.95
Hand forged. Unbeatable for driving tent stakes and other camp chores
as well as throwing.
CAT. NO.
ITEM
PRICE
BL301..................... TOMAHAWK................................................... $26.95
BL301H.................. EXTRA HICKORY HANDLE............................... 3.95
PROFESSIONAL LETTER OPENER
THE BLACK HAWK
BLL01 example above is shown with Star Spangled Banner polyester
pearl handle material, Cat. No. POL26S.
9-5/8” overall length, 5-1/8” long blade, 1/16” thick hardened 6A high carbon
stainless steel with a 3/4” wide handle and 3/32” diameter holes for pins.
Highly polished and RC 56 hardness too. Looks terrific when dressed up
with Water Buffalo, Polyester Pearl or just about anything you can dream
up. Beveled on one side of the blade for easy cutting in either direction,
like a quality letter opener should. The 4” length handles fit just great.
CAT.NO.
ITEM
PRICE
BLL01..................... OPENER ONLY................................................$8.95
BLL01C................... OPENER WITH DEEP CRYO TEMP................12.45
Cast from a steel alloy. Weighs 1-3/4 lbs. with a 19” hickory handle. Ideal
for camping, backpacking and throwing.
CAT. NO.
ITEM
PRICE
BL300..................... TOMAHAWK................................................... $24.95
BL300H.................. EXTRA HICKORY HANDLE............................... 3.95
WOOD CARVER 4 PIECE SET
EXECUTIVE LETTER OPENER
This letter opener is made of high polished stainless steel and is 8-1/4”
overall. Use 3/32” pin material.
CAT.NO.
ITEM
PRICE
BL037...................... OPENER ONLY............................................... $8.95
Four piece wood carver blades made from high carbon stainless steel
and cryogenically treated and double tempered for extra edge holding.
(Sold in sets only).
CAT.NO.
ITEM
PRICE
BL763C................... 4 PIECE SET W/CRYOGENIC...................... $19.95
TEMPERING (-305F)
fax (713) 461-8221
75
CARBON STEEL KNIFE BLADES
This line of blades is suitable for kitchen and buck skinners. All
patterns are old, proven classics that date back to the time when
a family purchased one or two knives and then used them for everything. The knife collectors will recognize the Russell trademark,
which has been used since 1834. These blades are of high quality
carbon steel, flat ground for ease in sharpening and cutting. No
frills and nothing wasted on cosmetics, just good usin’ knives.
PARING BLADE
Camp & Kitchen
CAMP KNIFE BLADE
5” long blade, 9” overall, .094” thick, 1-1/8” wide, very sturdy, three
5/32” diameter holes.
CAT.NO.
PRICE
BLCAM.......................................................................................... $12.95
RUSSELL GREEN RIVER BLADE
Paring knife, spear point, 3-1/4” blade, 7-1/4” overall, .057” thick, with three
5/32” diameter holes for pins or rivets.
CAT.NO.
PRICE
BL033................................................................................................$8.95
PACIFIC PATCH PARING BLADE
4-7/8” long blade, 9” overall, .088” thick, 1” wide, spear point, also known
as Danby’s knife, three 5/32” diameter holes for pins and rivets.
CAT.NO.
PRICE
BLRGR...........................................................................................$12.95
SHEEP SKINNER BLADE
3-1/2” long blade, 6-3/4” overall, .074” thick and three 5/32” diameter
holes.
CAT.NO.
PRICE
BL035................................................................................................$8.95
RIPPER BLADE
9-5/8” overall length , .133” thick, 1-1/4” wide, 5-1/4” long blade curved
upward for maximum skinning, three 5/32” diameter holes for pins and
rivets. This is an excellent skinning blade.
CAT.NO.
PRICE
BLSSK........................................................................................... $12.95
BONING BLADE
4” long blade, 8-3/4” overall, .075” thick, 3/4” wide spear point with three
CAT.NO.
PRICE
BL040................................................................................................$8.95
SHEATH KNIFE BLADE
6” long blade,10-1/2” overall, .115” thick, 1” wide, very sturdy with three
5/32” diameter holes for pins and rivets.
CAT.NO.
PRICE
BLBON.......................................................................................... $ 12.95
BUTCHER BLADE
4-1/2” long blade, 8-1/2” overall, .085” thick, 1-1/4” wide and three
CAT.NO.
PRICE
BL045..............................................................................................$12.95
BUFFALO SKINNER
7” long blade, 11-1/2” overall, .093” thick, 1-1/4” wide, a good size butcher
knife blade.
CAT.NO.
PRICE
BLBUT........................................................................................... $14.95
TEXAS BUTCHER BLADE
5” long blade, 9” overall, .138” thick, 1-1/4” wide, three 5/32” diameter
holes for pins and rivets. This one is the real skinner blade.
CAT.NO.
PRICE
BLBUF........................................................................................... $12.95
76
15-1/8” overall carbon steel blade. Blade is 10” long, .108” thick with a
maximum width of 1-5/8”.
CAT.NO.
PRICE
BLBUTEX....................................................................................... $19.95
fax (713) 461-8221
CARBON STEEL AND LAMINATED KNIFE BLADES, ETC.
SOLIGEN CARBON STEEL KNIFE BLADES
LAMINATED STEEL BLADES
The following knife blades are all high carbon German made hunting
knife types that we are sure you will enjoy finishing. They are also
hidden tang type, which allows more individual latitude in fashioning the guard, handle and pommel. Gives it your personal touch.
BL601
BL600
BL111
SUPREME SKINNER
9-1/2” overall length, 5” long blade, 5/32” thick thumb grooves, 1-1/4” wide,
hollow ground, and nicely upswept. Usually they come threaded 10/24 for
tang nut #1. FITS SHEATH #5
CAT. NO.
ITEM PRICE
BL170 . ................... BLADE ONLY................................................ $29.95
LARGE DEEP BELLY SKINNER
9-1/4” overall length, 5-1/4” long blade, 5/32” thick, 1-1/4” wide, nice clip
point on an old time shape for those big skinning jobs. False edge at top
and flat ground satin finish set this off as a good-looking skinner blade.
CAT. NO.
ITEM PRICE
BL147...................... BLADE ONLY................................................. $29.95
BL600 and BL601 are composed of 3 laminations of steel. The center
is razor blade hard and the outer laminations are softer and protective of
the edge bearing center. This ingenious design works to give the blade
a lasting edge with increased flexibility. The center lamination registers a
59 on the Rockwell “C” scale and therefore stays sharp for a long, long
time. It also extends through the entire blade so the edge won’t wear off
with repeated sharpening. These blades have a correctly curved section
for skinning and a straight section for slicing.
BL111is not laminated for a reason. A blade of this size (2-11/16” long)
needs to be thin to be useful. Laminating a blade this small would make it
too thick. What you have in the BL111, or what is called“The Runt”, is the
smallest blade of their line. It is razor blade hard and compact making it a
good choice for patch knives for muzzleloaders, trout knives for fisherman,
boot knives, small game knives, or wood carvers.
CAT. NO.
ITEM
PRICE
BL600........................ NORSEMAN 3-1/4” long blade.................... $19.95
BL601........................ VIKING 3-3/4” long blade.............................. 21.95
BL111........................ THE RUNT 2-11/16” long blade..................... 16.95
LAMINATED CARBON STEEL BLADES
BL607
SMALL DEEP BELLY SKINNER
BL608
8-1/2” overall length, 4-1/2” long blade, 1/8” thick, 1” wide, flat ground
and satin finished blade. Same as BL147 above, but smaller. Tang nut
#1. FITS SHEATH #7.
CAT. NO.
ITEM PRICE
BL146 . ................... BLADE ONLY.................................................$24.95
DROP POINT UTILITY BLADE
8-1/4” overall length, 5” long blade, 5/32” thick, 1-1/8” wide, flat ground
and satin finished. Tang is threaded 10/24 for tang nut #1. FITS
SHEATH #8.
CAT. NO.
ITEM PRICE
BL132...................... BLADE ONLY................................................ $24.95
The “Little Swede” and the “Big Swede” are laminated carbon steel baldes
from Sweden. The blade is a three part laminate with a core of high carbon
steel protected by sides of lower carbon outer steel. The core of these
laminated blades is very hard (61-62) Rockwell C. The “Big Swede” has
a blade length of 4-1/4” and is 7/8” wide and 0.100” thick and has a 4-1/4”
long hidden tang. The “Little Swede” has a blade length of 3-3/4” and is
5/8” wide and 0.105” thick and has a 3-7/8” long hidden tang..
CAT. NO.
ITEM
PRICE
BL607........................ BIG SWEDE 4-1/4” long blade.................... $22.95
BL608........................ LITTLE SWEDE 3-3/4” long blade................. 17.95
CAST IRON SPEAR POINT
13-1/2” overall length and 2-1/2” maximum width. Tang is 3/16” thick and
15/16” wide, 3-1/2” long with two indentations for holes to be drilled out.
Cast iron with four ribs and very tough. Weighs 1 lb. 6 oz. Maximum thickness through ribs is 7/16”.
CAT. NO.
ITEM PRICE
BLSP1..................... BLADE...........................................................$29.95
fax (713) 461-8221
77
STICK & CANE MAKING SUPPLIES
BRASS STAFF TIP WITH STEEL ICE SPIKE
WATER BUFFALO HANDLES
WBHAND1
WBHAND2
WBHAND3
Beautiful carved Water Buffalo Horn handles for your walking sticks.
Since the handles are a natural material, no two are exactly alike. They
are usually a solid black or black with a few white striations.
CAT. NO.
SIZE
PRICE
WBHAND1......... 5” long x 1” diameter at grip................................ $14.95
WBHAND2......... 5” long x 1” diameter at grip.................................. 14.95
WBHAND3......... 5” long x 1” diameter at grip.................................. 14.95
ROYAL BRASS CANE HEAD
The Royal brass cane head is made of solid
brass with a carved pattern on the surface.
The cane head comes with an internally
threaded 1” diameter collar for screwing onto
the shaft of your cane. If you want your cane
to be segmented, a 1” cane joint is available
separately. Instructions are included. Use a
waterproof epoxy.
CAT. NO.
SIZE
PRICE
BRHAND1.......... 5” long x 1” diameter at grip................................ $18.95
NICKEL SILVER, BRASS & COPPER COLLARS
These beaded collars come in nickel silver, brass and copper high polished finishes. They make an elegant addition to any cane or stick.
CAT. NO.
FINISH & SIZE
PRICE
COLNS21........NS - 21mm ID x 24.5mm high X 25.08mm OD........ $8.95
COLNS23........NS - 23mm ID x 24.1mm high x 27mm OD................ 8.95
COLNS25........NS - 25mm ID x 25.25mm high x 29.2mm OD........... 8.95
COLBR21........Brass - 21mm ID x 24.5mm high x 25.08mm OD...... 3.95
COLBR23........Brass - 23mm ID x 24.1mm high x 27mm OD........... 3.95
COLBR25........Brass - 25mm ID x 25.25mm high x 29.2mm OD...... 3.95
COLCO23.......Copper - 23mm ID x 24.1mm high x 27mm OD......... 5.95
BRASS JOIN
Brass join. Made from cast brass, turned,
threaded and polished. Threaded 3/8” on one
side and 5/16” on the other side. Comes in
3/4” and 1” diameter.
CAT. NO.
SIZE
PRICE
JOIN1................. 1” diameter........................................................... $6.95
JOIN2................. 3/4” diameter.......................................................... 6.95
MAKE YOUR OWN WALKING STICKS
Discover the world of crafting canes and staffs.
Learn from woodworker and author, Charlie
Self, how to make simple creations or create a
fancy "one of a kind" work of art. Fifteen projects are included in the book with step-by-step
instructions, helpful sidebars, and full-color
photographs. We like this book a lot, especially
the excellent pictures and explanations for stick
making. Soft cover with 141 pages in color.
CAT. NO.
ITEM
PRICE
PUB40................ BOOK................................................................. $17.95
78
CAT. NO.
BRTIP1
This walking stick tip not only protects your wood
from scuffing and wear, but also adds elegance to
your project. The solid brass walking staff tip will
fit shafts with an end diameter of 3/4” or larger. Included with the brass tip (1-1/4” long) is a rubber tip
(5/8” long) which comes with a fixing screw. Also, for
icy, wet or rugged conditions, you can interchange
a stainless steel tip (3/4” long) with the rubber tip.
Instructions are included..
ITEM
PRICE
Brass Staff Tip, Rubber Tip, Stainless Steel Tip ..... $24.95
ALPINE SPIKE
The alpine spike is a polished steel spike that
can be attached to the end of your staff or cane.
Internal diameter of ALSPIKE1 is 7/8”, inside
depth is 1” and overall length is 2-1/4”. Internal
diameter of ALSPIKE2 is 15/16”, inside depth
is 1-1/8” and overall length is 2-3/8”. Great for
rocky, rugged conditions or icy terrain. Rubber
tip optional.
CAT. NO.
SIZE
PRICE
ALSPIKE1.......... 7/8” x 1” x 2-1/4”...................................................$8.95
ALSPIKE2.......... 15/16” x 1-1/8” x 2-3/8” .........................................8.95
RUBBER TIP
Rubber ferrule fits over the alpine spike for
nonrugged terrain. The tips are 1-5/8” high and
1-1/8” diameter at the base.
CAT. NO.
SIZE
PRICE
RUBTIP1............ 1-5/8” high x 1-1/8” base...................................... $2.95
FERRULES (END CAPS)
Brass ferrules without steel tips. Lacquered antique finish that gives a grey/brown color. This
finish can be rubbed or buffed off to give a bright
brass finish. Taper the end of the stick to get a
tight fit and secure with waterproof epoxy or
pins.
CAT. NO.
SIZE
PRICE
BRTIP2............... 7/8” high x 1” (25mm) I.D (inside opening)........... $1.95
BRTIP3............... 7/8” high x 13/16” (21mm) I.D (inside opening)..... 1.95
BRTIP4............... 7/8” high x 3/4” I.D (inside opening)....................... 1.95
BRTIP5............... 7/8” high x 7/8” I.D (inside opening)....................... 1.95
BRTIP6............... 7/8” high x 1-1/8” I.D (inside opening).................... 1.95
ZINC COUPLER
This zinc coupler is turned, threaded
and polished. The internal thread and
screw is 1/4” - 20. Overall assembly
is 2” and each piece is 1”. They are
installed by drilling a 7/16” diameter
hole into the end of each piece to be
CAT. NO.
PRICE
joined. Glue the coupler in place usZTHREAD............................$6.95
ing a water resistant epoxy.
WATER BUFFALO SPACER
This is a nice spacer to use on your walking stick or cane.
1” diameter x 1-1/2” long. Usually black but sometimes
there are a few white striations.
CAT. NO.
ITEM
PRICE
WBSP23............. SPACER...................................... $3.25
fax (713) 461-8221
Heat Treat and Cryo
FOR OFFICE USE ONLY
Date____________
paid
Please Circle:
cUST. I.D. nO. (if known)____________
10649 Haddington, #180
Houston, TX 77043
return after heat treatment to:
pickup
ship
DAYTIME PHONE (MUST BE INCLUDED):
Method of Payment:
DISCOVER
C.O.D.
USA only
CARD
MASTERCARD
Check or Money Order
VISA
AMERICAN
EXPRESS
Month / Year
ExpirationDate
*
Credit Card Number
3 Digits on Back of Card
or 4 Digits on Front of Card if Am. Ex.
approval signature:______________________________________
please read the following:
1. Blades must have a name or logo permanently stamped or etched on blade or tang. If there is not name or logo, please include
an outline of your blades on the back of this form or a separate piece of paper to help us keep up with your blades.
2. Please do not use duct tape on blades or packaging. Maximum overall length is 20 inches.
3. Please do not attach anything to blade that will melt below 2500 F.
4. Blades must be clean. Please protect points from damage during shipping to TKS.
5. All blades must be in our office by 5:00 p.m. on Monday to be entered for heat treatment Tuesday morning. We make every effort
to ship the blades that have been heat-treated the following Tuesday.
6. Our guarantee is that every possible effort will be made to give each blade the best combination of hardness and toughness
through the proper use of equipment. However, if a blade is damaged due to our handling or equipment malfunction, our liability
is limited to the replacement of an equal amount of the same steel used in the damaged item. Any further responsibility will not
be accepted nor will we be responsible for warpage due to unequal grinding or grinding the blade too thin. We also reserve the
right to refuse any blade that could have serious heat treating or warpage problems we could not correct.
heat treating and tempering cost:
List quantities of each type of steel in the space provided.(Air Quench Only)
440C___ ,440V___,154CM___, ATS34___, A-2___, D-2___
QUANTITY
Overall lengths less than 10 inches...1 to 7 blades @ $5.50 each................................ Overall lengths less than 10 inches...8 or more blades @ $4.95 each.......................... Overall lengths of 10 to 20 inches...All blades @ $10.00 each.....................................
440C___ ,440V___,154CM___, ATS34___, A-2___, D-2___
All springs, rockers, and spring holders for folding knives @ $4.00 each..................
Cruwear___, Vascowear___, BG42___, CPM10V___, and other exotic steels
All blades of this material will cost $15.00 for each blade........................................
extra tempering sequence:
Double draw (temper) of steel other than D-2, A-2, 440 V or triple draw for Cruwear and Vascowear at customer’s request for hardening to different hardness than we normally
attain will be an extra charge of $4.00 per item or blade..............................................._________
sub-zero quench: (-305 degrees F) @ $4.00 each....................................................... _________
*UPS Add’l insurance (over $100 value)
U.S.P.S. Priority (2 lbs or less). *U.S.P.S. Add’l insurance
Total Shipping Charges
$ 7.95 minimum
$ 0.50 per $100 extra
$ 7.95 minimum
$100.00 = $2.30 $200.00 = $3.35
$300.00 = $4.40
return of this form completed will
expEDIte the return of your blades
_________
_________
Total for Merchandise & Services
SHIPPING CHARGES
UPS (2 lbs. or less) Includes ins. of $100.00.
PRICE
$
important!
*Additional Insurance Charges
TX Residents add 8.25% Sales Tax
TOTAL AMOUNT
Value of blade(s) $__________________
So your blades can be insured properly.
fax (713) 461-8221
79
Order Form
Date:___________________
Texas Knifemaker’s Supply
10649 Haddington, #180
Houston, TX 77043
Date Received
Billing address:
Name
Address
City, State, Zip
Phone(
)
E-mail Address
QTY.
Cust. I.D. #
Gathered by
Checked By
Checked By
DESCRIPTION
item price total price
SUBTOTAL
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Shipping Charges $7.95 Minimum (Taxable)
IMPORTANT: When ordering steel please allow additional shipping charges.
TX Residents add 8.25% Sales Tax
Houston Residents add 8.25% Sales Tax
WHICH ACTION DO YOU PREFER FOR OUT OF
STOCK ITEMS?
CREDIT MEMO TOWARD FUTURE ORDER
REFUND (REFUNDS FOR PURCHASES PAID FOR
WITH PERSONAL CHECKS MAY TAKE UP TO 28 DAYS FOR PROCESSING.)
TOTAL
Method of Payment:
Check or
Money Order
VISA
ANY RETURN MUST BE MADE WITHIN 10 DAYS OF DELIVERY
OR ITEMS WILL BE SUBJECT TO A 15% RESTOCKING FEE.
NO RETURNS AFTER 30 DAYS
AMERICAN
EXPRESS
DISCOVER
CARD
Order Toll Free (888) 461-8632
order ON-LINE AT www.texasknife.com
80
C.O.D.
USA only
MASTERCARD
*
Credit Card Number
CHECKS RETURNED FOR ANY REASON WILL BE CHARGED
$ 25.00
Thank you for your order!
Packed By
Shipping Address:
(if different from billing address)
Name ________________________________________
Address ______________________________________
City, State, Zip _________________________________
Phone (____)___________Fax (____)____________
Fax(____)
CAT. NO.
Date Shipped
Enclose Check or Money Order or will ship
C.O.D. USA only - UPS C.O.D. Fee $9.00
Foreign Orders must be paid in Advance VISA/
MC or cashier’s check in U.S. funds
Month / Year
Expiration Date
*Three digits
on back of
credit card.
*American Express - Last
four digits on
front of card
Cardholder’s Signature
fax (713) 461-8221
Paper Based Micarta
Linen Based Micarta
Canvas Based Micarta
ORDERING AND POLICY INFORMATION
Technical Help
Please call us at 713-461-8632 if you have questions. Our sales people will be glad to answer questions on how to make knives, use our products or answer
any shipping questions you may have. Also you may find help on our internet site at www.texasknife.com.
Fax
You may fax your order to us 24 hours a day at 713-461-8221.
Hours for ordering
Our hours for ordering are 8:00 a.m. until 5:00 p.m. (CST) Monday through Thursday, 8:00 a.m. until 3:00 p.m. Friday, and 9:00 a.m. until 12:00 p.m. Saturday.
We are closed Sunday and the following holidays: New Year’s Day, Memorial Day, July 4th, Labor Day, Thanksgiving and Christmas.
Payment
We accept checks, money orders, and cashiers checks in U.S. funds, VISA, MasterCard, Discover, and American Express. There is a $25.00 fee for returned
checks.
Shipping
Our goal is to ship within 24 hours of receiving your new order. We ship UPS whenever possible, so please give us a street address or route and box number.
We will also ship COD; however, orders shipped COD via UPS will need to be paid by check or money order only. UPS will no longer accept cash. Post office
box addresses will be shipped United States Postal Service Priority mail.
Back Orders
We DO NOT backorder unless you specifically request that we do so. On back orders, you pay shipping but there is no handling charge. You may indicate
a second or third choice of substitution on your order form. When a product is out of stock and you have paid by check, cash or money order, we will issue a
credit memo or refund. Please indicate on the order form whether you prefer a credit to your account or a refund. If a personal check is used to pay
for the purchases, it may take up to 28 days for processing before a refund is issued.
Returns
If you have a problem with our merchandise or if a question should arise, please call a member of our staff who will assist you with that problem. Returns
or exchanges must be approved and returned to us within 10 days of delivery or items will be subject to a 15% restocking fee. No returns will be accepted
after 30 days of purchase. A copy of the original invoice must accompany any return. We will not accept any COD return packages. Items must
be returned by regular UPS or regular mail.
Catalogs
Catalogs in the US are $4.00 prepaid. International catalogs are $10.00 prepaid.
International Orders
Please call for shipping charges. We ship Parcel Post Air or UPS, whichever you prefer, and charge actual shipping and insurance charges plus a $1.00
handling fee.
Equipment
Equipment must be prepaid with VISA, MasterCard, Discover, or American Express.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE

product list - Texas Knifemaker`s Supply

Transcription

Similar documents

Nordic Plow for Dixie Chopper Zee 2

pbskids.org/catinthehat

uEST FoRCouycttAcrrox

kinder 2015 16 public - Fulton County Schools

New Products 2011 New Products 2011

Specalog for 304C CR Mini Hydraulic Excavator, AEHQ5682-02

Cats Live Longer, Healthier Lives Indoors

Caloosa Humane Societ

Don`t hatchet your counts before they

MODEL LM 1 - Log Master Portable Saw Blade