Horse Stalls - Our CO-OP
Horseman’s Choice Horse Stalls
Set-up of stall is simple and quick. Portable, free-standing stalls can easily
be set up in various row configurations with easy-to-use connectors. Wall
brackets are available if stalls are to be attached to a current wall. Lower 4’
of stall is to be filled with 2” customer-supplied lumber.
Heavy gauge 2” round tube framing is used for extra strength and stability,
and 1/2” solid vertical rods spaced 3” apart allow for better ventilation and
viewing of the horse than competitors’ vertical tube dividers. No sharp
edges to injure animals. Each stall front comes with a 4’ sliding door and
2’ feeder door. Feeder door swings out easily and is low enough to allow
even a child to use. Sliding door has rollers on top which allow the door
to glide easily with minimal effort. Optional Corner Feeders (#15574 and
#15575) can be attached to allow horse to be fed from outside the stall.
Finished with Behlen’s Diamond Kote paint — a high solids, baked-on
polyester enamel. This finish is harder, smoother, glossier and more chip resistant, corrosion-resistant, and fade-resistant than conventional paints.
Available in gray or in galvanized finish.
DIRECT SHIP ONLY!
Horse Stalls 7' High - gray or galvanized finish
10' Front Panel with door
10' Stall Panel with bars
10' Solid Panel
12' Front Panel with door
12' Stall Panel with bars
12' Solid Panel
Wt. / Lbs.
Wt. / Lbs.
Stall Connectors - black only
Wall Connectors (pair)
2-Way Connectors (pair)
3-Way Connectors (pair)
4-Way Connectors (pair)
Horse & Pet Catalog 87