Jaguar XK120-140-150 1949-1961

Transcription

READING TIP
when browsing through
this catalogue it is easier
using two-up view
(viewing the left & right side next to each other)!
FOR BEST RESULTS
DO NOT
PRINT THIS PAGE!
This page will interfere with the
correct page order when printing
recto-verso.
The illustrations and photo’s in our catalogues and on our website are protected.
It is illegal to copy these in any way or by any means.
You are permitted to print the pages for personal use only.
Quality Parts & Service
JAGUAR XK
120-140-150 • 1949-1961
PARTS & ACCESSORIES CATALOGUE
T h i r d E d i t i o n • 19 0 . 6 9 4 Quality Parts & Service
JAGUAR XK
120-140-150 • 1949-1961
fill your customer number
in for easy ordering
www.angloparts.com
please visit our website for all contact information
Anglo Parts Shops
MAIN BRANCH BELGIUM
HOLLAND • ITALY • GERMANY
Authorized Anglo Parts Dealers
FRANCE • HOLLAND • SPAIN
SWEDEN • FINLAND
CZECH REPUBLIC • SLOVAKIA
LUXEMBOURG • POLAND • HUNGARY
All Rights reserved. No part of this publication may be reproduced or absorbed
in any catalogue or information system by any means, Mechanical, photographic,
electronic or otherwise, without prior express written consent of Anglo-Parts n.v.
Third Edition
•
19 0 . 6 9 4
•
Updated December 2007
•
© Anglo Parts nv 2007
Important information
IMPORTANT POINTS
The general policies of our business are printed on the reverse side of our invoices and are on our website. Updates are printed in the most recent catalogues and price lists and are
updated on the website. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed
all previous. Please read below, the most important points.
OUR SALESMEN
We are not trained automotive technicians and cannot be held responsible for errors we say or write, we are enthousiasts who like to help. For technical information, we recommend you
use the books listed in this catalogue.
OUR CATALOGUES/WEBSITE
We have made every effort to make sure that the information in our catalogues and on our website is correct. We cannot be held liable or responsible if any mistake or inaccuracy exists in
specification, pricing or part number. We have the right to correct any error. The illustrations and photos in our catalogues and on our website are only representations, products supplied
may vary from illustrations and photos, but will function the same way with similar quality.
OUR PART NUMBERS & PRICES
All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity
you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed
on the website or in our price lists. Information will be sent to you on request. Prices shown on the website and in the price lists are for one item and information only and are subject to
change without prior notice. Prices on the website can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this
is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for
washers, etc. The condition of the part we sell is indicated on the website and in the price list. The following codes will appear on the website in the catalogue parts lists and on the price
lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently
NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required
can vary from application to application. USE - the part number has been replaced by an other part number indicated.
ORDERS
Orders are welcome through the WEBSITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch.
For orders not made through our Website, can we please ask you to prepare the following, using our ORDER FORM.
- Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscale (for Italian customers only) or VAT number for
european companies.
- Specify if shipping address is different.
- CAR TYPE INFORMATION, make, model, year build etc.
- Provide Anglo Parts PART NUMBERS only.
- Indicate the quantity desired and parts description.
- Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank.
- Once an order placed, we put this in the computer system and the processing of lables, lists and checking lists will follow. Changing an order already placed, will hold up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to sending it to us. This will help us deliver the parts in time. Thank you for your understanding.
PAYMENTS
CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number ( mostly 16 figures ), expiring
date and name as appears on the card.
BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice
(Not for Website) number and our bank references. Please note the invoice number and your customer number with any payment you make.
SHIPMENT
NATIONAL: We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used.
INTERNATIONAL:We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and
fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted.
Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made
within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.
RECEIVING YOUR GOODS
For all shipments, on arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in accordance
with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the transport company
immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the final check must be made
by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait to check the goods until you
actually need them and report problems within three days of receiving the goods.
WARRANTY
Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods
for approval but we are not able to inspect each individual product. It is the responsability of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical
parts must be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and
reasonable warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty
installation or parts being used for rally or competition. All products for warranty claim must be returned to the shop where you bought them by using the following procedures: the value
must be over 8 euro, the goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled
the part, our responsibility for it has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate
when we have received the goods back from you in undamaged condition. During the return these goods should not be damaged by poor packing or by transport. The warranty period
for reconditioned parts is limited to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original
equipment manufacturer or by Anglo Parts nv for a period of one year starting from the date on the invoice.
RETURNS
If you receive an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be
accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels
etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of
arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do
not refund the value of credit notes.
SURCHARGE - CORE DEPOSITS
A surcharge will be added to the price for parts offered on an exchange basis. The surcharge price can be seen on the website in the catalogue parts lists and is listed in our pricelist near
the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained
of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old
unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please
make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately
check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is
the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system.
In this latter example we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.
BACKORDERS
Goods which are not in stock at the time of your order will be kept in backorder. We will inform you when these are available again and parts will be reserved for you for a period of
fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you
can also specify “No Backorders” or ask us to cancel all previous backorders. When a part you had on backorder becomes obsolete, we will let you know as well. If you decide to take
this part in used condition, please ask us and we will do our best to obtain it, if possible.
©
V a n
G e s t e l
XK140 FHC
Fixed Head Coupé 1954-’57
B & C
2 0 0 2
XK150 OTS
Open Two Seater 1957-’60
XK150 DHC
Drop Head Coupé 1957-’61
XK150 FHC
-S- Type 3.8cc
Special equipment Oct.1959-on
1
Belangrijke informatie
BELANGRIJKE PUNTEN
De verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze website. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze
website bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal
alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.
ONZE VERKOPERS
We zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken
uit de lijst in de katalogus aan.
ONZE KATALOGI
Geen inspanning was ons te groot de juiste informatie in onze katalogi en op onze website te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden
i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze website zijn slechts
voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.
ONZE ONDERDEELNUMMERS EN PRIJZEN
Alle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagt
kan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen
die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze website. De prijzen in onze prijslijsten
en op onze website zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W.
vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162
voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de website vermeld of kan worden herkend aan het nummer. De volgende kodes zullen
in de prijslijst en op de website naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden
aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant.
A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.
BESTELLINGEN
U kan altijd bestellen via onze website, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze website gebeuren gelieve rekening te
houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt:
- uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven;
- specifieer als het leveringsadres verschilt;
- informatie over de auto, merk, model, bouwjaar, enz.;
- gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken;
- geef het aantal stukken aan en beschrijf de onderdelen;
- duid de betaalwijze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD.
- Eens uw bestelling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil
wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken, vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.
BETALINGEN
Kredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD.
Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden.
Bank: (Niet voor bestellingen via onze website) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)
VERZENDING
Nationaal: We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt.
Internationaal: We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u
in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko
op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen
tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van de bestelling
ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op risiko van de koper.
ONTVANGST VAN DE GOEDEREN
Gelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de
vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur
en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer
tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij
ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen tot
u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.
DE WAARBORG
Bijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk
zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische
produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing.
De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een
komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten
naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten
bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald,
zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd
door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.
TERUGZENDEN
Wanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde
van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers,
zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met
de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en
de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.
SUPPLEMENT
Een supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze website naast het betrokken onderdeelnummer
en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie
en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u
ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen.
Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen.
Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met
het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor
ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van
de krukas terugbetalen.
BACKORDERS
De goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “backorder”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren
de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze
onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen backorders” of ons vragen alle vorige te annuleren. Als een onderdeel in “backorder” niet meer kan
worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.
2
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Informations importantes
Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.
LES POINTS IMPORTANTS
Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous,
vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes.
Vieillez lire les points les plus importants, mentionnés ci-dessous.
NOS VENDEURS
Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider.
Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.
NOS CATALOGUES
Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la
spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.
NOS NUMEROS DE PIECE ET LES PRIX
Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être
différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces
non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent
seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix.
Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates.
L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme
nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du
siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le
numéro de pièce a été remplacé par le numéro indiqué.
Vous pouvez
-
-
-
-
-
-
LES COMMANDES
toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande:
votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises;
spécifiez si l’adress de livraison est différente;
informations sur la voiture: la marque, le modèle, l’année de construction, etc.;
utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement;
donnez le nombre des pièces et décrivez les;
indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur.
Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.
La carte de crédit:
La Banque:
National: International: LES PAIEMENTS
Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte.
Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. (Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)
L’EXPEDITION
nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit.
nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que
la TAXE si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien
les produits et la risque d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés
ou perdus pendant le transport. Il faut introduire les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel
d’emballage pour vérification. Nous n’assurons pas le transport de verre et le transport se passe au risque de l’acheteur.
LA RECEPTION DES PRODUITS
Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement
en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur.
Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des
produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les
produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.
LA GARANTIE
Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les
produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques
pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces
est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la
suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin
d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les
produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit
d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris
en considération de vérification.
LA REEXPEDITION
Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez
noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits
au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a
déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du
pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.
LE SUPPLEMENT
Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé
en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez
aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec
votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au
paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les
points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité,
est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un
arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).
LES “BACKORDERS”
Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “backorder”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous
vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont
plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de backorders”, ou bien nous demander d’annuler tous les “backorders” précédents. Si nous ne pouvons plus livrer
une pièce en “backorder”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.
©
V a n
G e s t e l
XK140 FHC
B & C
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
3
Wichtige Auskünfte
1. EINFÜHRUNG
Die Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die
Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit
Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen
Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockheed, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn
Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster
Stelle stehen sollten.
2. ALLGEMEINE GESCHÄFTSBEDINGUNGEN
Wir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind.
Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese.
Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf
die Verträge.
3. TECHNIK
Für technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen,
diese dienen lediglich der Darstellung unserer Waren.
4. KATALOG
Wir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der
Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche
entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder
nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen
als solche bezeichnet werden.
5. ERSATZTEILNUMMERN UND PREISE
Alle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des
jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie
die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile
stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise
beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils
an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die
folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert,
und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf
der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die
Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.
6. AUFTRAGSERTEILUNG
Sie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre KundenNummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich).
- Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht.
- Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw.
- Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden.
- Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an.
- Geben Sie die Art der Zahlungsweise an.
- Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.
7. ZAHLUNGSWEISE
Sobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer
und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen
Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die
Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.
8. VERSENDUNG
Da der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung
beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware,
die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher
bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für
den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie
den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden.
Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die
letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.
9. RÜCKSENDUNGEN
Wenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen
erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine
Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe,
Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit
denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die
Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.
10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASIS
Für Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden
Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis
wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem
Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus
dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den
Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen
diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen
aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch
wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten.
Insoweit führen wir eine Schätzung durch.
11. NACHLIEFERUNGEN
Waren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das
Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine
Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil
nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender
Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.
4
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Allgemeine Verkaufs- und Lieferbedingungen
Allgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar
1.
Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich
zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im
Einzelfall nicht ausdrücklich widersprochen wurde.
2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern
noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines
Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts
zurückzugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”).
Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet werden,
nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)
3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat
der Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren
Verzugsschadens bleibt vorbehalten.
4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich, spätestens
innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben bei uns geltend
zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir lediglich zur Nachbesserung
bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir behalten uns die Überprüfung etwa
gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor dessen Prüfungsergebnis vorliegt. Nach
endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt. Gewährleistungsansprüche entstehen nicht,
wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder
nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den Liefergegenstand sowie Schäden aus sportlichen
Einsätzen.
5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind
ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.
6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit
dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen
Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretungen)
unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.
7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung
einer Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen
ein Einbauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile
abzüglich einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.
8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser
Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das
entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine
Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils
wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.
9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei
Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung
für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.
10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich
das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine
Anwendung.
11
Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadurch
die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der der
wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen
Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.
12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich
für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.
©
V a n
G e s t e l
XK140 FHC
B & C
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
5
Informazioni importante
INFORMAZIONI IMPORTANTI
Le condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di
vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.
I NOSTRI VENDITORI
Non sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri
tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.
I CATALOGHI
Ci impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o
mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso.
Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime.
La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da
moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata.
I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi
possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa.
Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come:
SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile.
LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione).
USE: il numero di articolo è stato sostituito dal numero indicato.
ORDINI
Accettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue:
- indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte;
- specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione;
- completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc.
- usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine.
- indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi.
- indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.
PAGAMENTI
Carta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre,
la scadenza, il badge code ed il nome del “titolare” della carta.
Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso,
sarà nostra premura spedire il materiale non appena arrivato il pagamento.
Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.
SPEDIZIONE
Effettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura,
essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine
di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare
comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale
fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.
RICEVIMENTO DELLA MERCE
Siete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale:
firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto.
Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi
meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.
GARANZIA
Anglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima
del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del
montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo
valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati
per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di
7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un
montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.
RISPEDIZIONE
Accettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene
detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro).
Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.
SUPPLEMENTO
Alcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio.
Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico
vostro.
BACKORDERS / ORDINI ARRETRATI
I prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede,
provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale
da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o
tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.
6
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
How to read and use the part number lists
GB
ILL n°.
Part n°.
QTY
DESCRIPTION
illustration number
Part number
Quantity required
Part description
Illustration number
Exceptions: If a part has no
illustration number it is because
there are several kinds of the part
in question.
e.g. Left and right hand
door panel.
Part number
Exceptions: A part number
may be missing if the part
is no longer obtainable or in
production.
Necessary quantity:
ATTENTION: indicated here is the
quantity of units necessary and not the
quantity of units which are supplied per
order/delivery.
Our parts are sold per unit.
Part description
With dimensions of screws, bolts, cables, etc.
Information about carburetters, electricity etc.,
details about books giving more information
about the part itself: original, reproduction,
reconditioned, etc.
Onderdeelnummer
Uitzonderingen: Een onderdeelnummer kan onbreken
waarneer dit stuk niet meer te
verkrijgen of in produktie is.
Nodige Hoeveelheid
LET OP: Hier wordt de hoeveelheid
stuks die nodig zijn vermeld en niet de
hoeveelheid stuks die worden geleverd
bij bestellingen. Onze onderdelen
worden verkocht per stuk.
Onderdeel beschrijving
Met maten van schroeven, bouten, kabels enz.
Informatie over carburateurs, elektriciteit enz.
Details over boeken die meer informatie geven.
Informatie over het onderdeel zelf: origineel,
reproduktie, gerestaureerd enz.
Numéro de la pièce
Exceptions: Si ce numéro n’est
pas indiqué, c’est parce que
cette pièce n’estplus disponible
ou qu’elle n’est plus en
production.
Quantité nécessaire:
ATTENTION: Sous cette rubrique,
on mentionne la quantité de pièces
qu’il faut et non la quantité de pièces
livrées lors de la commande. Nos pièces
détachées se vendent à l’unité.
Description de la pièce:
Comporte les dimensions des vis, écrous, câbles
etc. Des reseignements au sujet de carburateurs,
électricité etc., des détails concernant des livres
informatifs. Des renseignements au sujet de
la pièce même: pièce d’origine, reproduction,
pièce révisée etc.
Nummer des Ersatzteils:
Ausnahmefall: Mangelt diese
Nummer, dann ist dieser
Einzelteil nicht mehr verfügbar
oder wird er nicht mehr
hergestellt.
Benötigte Menge:
Achtung! Unter diesem Titel wird
die Menge der benötigten Einzelteile
angegeben, sondern nicht die Menge
der bei Bestellungen gelieferten
Einzelteile. Unsere Einzelteile werden
stückweise verkauft.
Beschreibung des Ersatzteils
Betrifft die Abmessungen der Schrauben,
Mutter, Kabel, usw.; Auskünfte über Vergaser,
Elektrizität, usw. Einzelheiten über InfoBücher, Auskünfte über den Einzelteil selbst:
Originaleinzelteil, Reproduction, überholter
Einzelteil usw.
in produzione.
Quantità necessaria
AVVERTENZA: La quantità di pezzi
necessari è data, e non la quantità di
pezzi consegnati dopo ordinazioni. I
nostri componenti vengono venduti
al pezzo.
Descrizioni componenti
Con misure di vite, bulloni, cavi ecc. Informazione
su carburatori, elettricità ecc. dettagli su libri che
danno ulteriore informazione. Informazione
sul componente stesso: originale, riproduzione,
revisionato ecc.
NL
Illustratie nummer
Uitzonderingen: Een onderdeel
heeft geen Illustratie nr. omdat
er meerdere soorten van het
bestaande stuk zijn.
vb. Links en rechts deurpaneel
F
Numéro illustration
Exceptions: Si une pièce détachée
ne comporte pas de numéro
d’illustration, c’est que la pièce
existe en plusieurs versions.
Exemple: Panneau de
porte gauche - droite.
D
Abbildungsnummer:
Ausnahmefall: Wenn ein Einzelteil
keine Abbildungs-nummer hat,
ist das, weil der Einzelteil in
mehreren Fassungen besteht.
Beispiel: Linke - rechte
Türfläche.
I
Numero illustrazione
Eccezioni: Un componente non
ha un numero illustrazione
perchè ci sono vari tipi del pezzo
esistente.
P. es. Pannello porta destro e
sinistro.
©
V a n
G e s t e l
XK140 FHC
B & C
Numero componente
Eccezioni: Può succedere che
non c’è un numero componente
quando il pezzo non è più
disponibile o quando non è più
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
7
Unit serial numbers, production dates & car numbers
ENGINE NUMBER
Unit serial numbers XK120. 140 & 150
GEARBOX NUMBER
REAR AXLE NUMBER
Stamped on the right-hand side
Stamped on the LH rear top of the
Stamped on the top
of the cilinder block above oil filter.
main casing and the top cover.
side of the nose piece.
Prefix
Prefix
Prefix
XK120 W, F
XK140 G
XK150 V, VA
XK120 SH, JH, JL & SL
XK140 JL, SL, JLE,
AUTOMATIC DG.200A & DG.250/MJ
XK150 JL CR, JL JS, M, JLS CR, JLS JS AUTOMATIC DG.250/MJ
XK120 (ENV, JHS)
2HA, 4HA
XK140 4HA
XK150 4HA
Production dates, car numbers
OTS= Open two seater, FHC= Fixed head coupe, DHC= Drop head coupe
XK120 OTS RHD 660001on LHD 670001on XK140 OTS RHD 800001on LHD 810001on XK150 OTS RHD 820001on LHD 830001on
FHC RHD 669001on LHD 679001on
FHC RHD 804001on LHD 814001on
FHC RHD 824001on LHD 834001 & 847001on
DHC RHD 667001on LHD 677001on
Total production 12045 Total production 8937 Total XK production 30364
Identification numbers
XK120
OTS RHD
OTS LHD
FHC RHD
START
SEPT 1949
670012
OCT 1949 660009
JAN 1950 660038 670113
JAN 1951 660656 671100
JUL 1951
NOV 1951
669002
JAN 1952
671856
JAN 1953 661049 673538 669005 JAN 1954 661163 674867 669127 END
JUL 1954
AUG 1954 661176 676438
XK140
START
SEP 1954
OCT 1954 JAN 1955 JAN 1956 END
OCT
NOV
MAR
MAY
1960 1960
1961
1961
8
DHC RHD
DHC LHD
679020
679308 680727
681353 669195
681485
667001
667194 677003
678136
667295 678472
OTS RHD OTS LHD FHC RHD FHC LHD DHC RHD DHC LHD
800001 800009 800067 810002
810090 810879 812072 804006 804011 804621 814003 814011 815325 807004 807018 807358 817002
817194
818309
815966 807480 819311
FHC LHD DHC RHD DHC LHD
END
OCT 1956 800074
NOV 1956
JAN 1957
813282
XK150
START
MAR 1957
AUG 1957
SEP 1957
NOV 1957
JAN 1958
OCT 1958 JAN 1959 JAN 1960 FHC LHD
Total production 9382
OTS RHD OTS LHD 804843
FHC RHD 834005
824024
830001
830007 824202 835160 820003
820023 831993 824770 836046 820067 832117 825128 836708 837001
827001
827004 827280
827285 827506 838114
838675
820093
832174
847095
827663
825369
©
V a n
839010
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Index
A
Accelerator pedal
Air filter
Alternator kit
Anti Roll UPRATED ,
fast road and rally
Anti-Roll bar
AUTOGLYM Products
30
30,81
84
84
40
89
B
Badges
66,67,77
Battery
51
Battery switch
51
Body fittings, handles
& boot lid fittings
70
Body hardware, bootparts
& vent box
64
Body modification, seats
& steering wheels
86
Bonnet Hinges, Catches & Props
65
Bonnet straps LE MANS
86
Books “Factory Owners handb.“
96
Books “Factory Parts Catalogues“
95
Books “Factory Workshop man.“
94
Books “Jaguar”
97,98,99,100,101
Books “ORGINAL” -series
93
Brake callipers
46,85
Brake cylinder, Master
44
Brake disc IMPROVED
85
Brake drum
46
Brake Fluid
44,85
Brake pads “GREEN STUFF”
85
Brake parts
46
Brake pipe set
44
Brake shoe
46
Brake, servo GIRLING
& LOCKHEED
44
Bumpers
66,67
C
Cable handbrake
Cable Choke
Cam cover
Camshaft, exhaust, inlet
Car cover
Carburattor service kit
Carburattor tools
Carburattor, rebuilding kit
Carburattors, new
Carburrattor gasket kit
Carburrattor oil, damper
Carburrattor WEBER
Carpet and trim components
Chain tensioner
Chassis
Choke Cable
Cleaning & body care products
Clutch kit
Clutch system
Clutch, Master Cylinder
Clutch, Pipe Kit
Clutch, Plate
Clutch, Slave Cylinder
Con rod
Con rod, bearing set
Control box
Cooiling Improvements
©
V a n
G e s t e l
XK140 FHC
48
53
10,78
10,78
88
25
25,81
25
24,29
25
25
81
75
16
39
53
89
33
33
33
33
33
33
14
14
52
80
B & C
C continued
Cooling and heater products
Cover Car
Crankshaft
Cylinder head
Cylinder head, gasket
32,80
88
14
10
10
D
Dashboard instruments
and components
Distributor
Door area & boot lid seals
Door windows, fittings OTS
Door windows,fittings
Coupé - DHC & FHC
Dynamo
53
50
72
68
69
52
E
Electrical components
Engine bearings
Engine mountings
Engine tuning & accessory parts
Exhaust manifold gasket
Exhaust manifold,fixing kit
Exhaust system
Exhaust valve
Exhaust, fitting kit
Exhaust, mounting
Exhaust, pipe
52
14
18
78,79
10
12
37
12
37
37
37
F
Fan, belt, waterpump
Flywheel , ring
Flywheel assembly
Front disc brake conversion kit
Front Lamps
Front shock absorber, KONI
Front shock absorber, std
Front suspension
Front suspension, bushing kit
Fuel Tanks
Fuel, filter
Fuel, pipes, hoses & lines
Fuel, pumps
Fuse box
21
14
14,78
85
56
40,87
40
40
40
31
31
31
31,81
52
G
Gasket , thermostat
Gasket set, cylinder head
Gasket set, engine
Gasket, manifold
Gearbox 5-SPEED conversion kit
Gearbox Borg Warner kit
Gearbox mountings
Gearbox parts
Gearbox Toyota Supra
Gearbox, gasket set
Grease gun
22
10
14
22
83
83
18
34
83
34
49
H
H6 Carburattor parts
H8 Carburattor parts
Handbrake parts
Handles
HD6 Carburattor parts
HD8 Carburattor parts
HEAT REDUCTION Products
26
26
48
70
28
28
82
H continued
Heater
Heater valve, hoses
Hoods & Tonneau covers
Horn
Horn push assembly
I
I.D. plates Stickers,badges
Ignition system
Improved braking
Inlet manifold, fixing kit
Inlet manifold, gasket
Inlet valve
Inner body panels
32
32
74
52
42
77
50
85
12
10
12
59,61,63
K
KENLOW fan kit
KONI , shock absorbers front
80
84
L
LEAD replacement lubricants
Leather care CONNOLLY
Lights
Locks LUMENITION
91
89
55
70
50
M
Main bearing set
Manifold
Manifold, inlet
Master brake cylinder,
brake pipe, & servo
Mirrors
Miscellaneous items
14
22
22
44
76
76
O
Oil cooler kit
Oil dipstick
Oil filler caps ASTON,MONZA
Oil filter & system
Oil pump
Oil seal conversion kit
Outer body panels Overdrive
Overdrive,gasket & seal kit
Overdrive,rebuild
Overdrive,solonoid assembly
P
79
18
78
20
19
14
58,60,62
36
36
36
36
PENRITE Oil information
Pistons
Power steering conversion kit
Practical Accessories & safety products
Propshaft assembly
Pulley
Pulley for fan
R
Radiator Grill
Radiator, Aluminium
Radiator, hoses
Rally instruments, Tripmasters
& warning lights
Rear axle, ENV
Rear axle, Salisbury
Rear Lamps
34
14
84
90
34
14
21
66,67
32,80
32
92
38
38
57
R continued
Rear shock absorber KONI, SPAX
Rear shock absorber std
Rear Spring
Rear sunspension & axle
Ring set
S
Seats and components + trim 75
Seats, Bucket 86
Servo unit LOCKHEED
85
Spanners & other tools
49
Spark plug, CHAMPION, NGK
50
SPAX , shock absorbers 84
Speedo Cable
53
Spot & fog lamps
55
Starter motor
52
Starter motor LIGHTWEIGHT
84
Steering box 42
Steering rack
43
Steering Wheel
42,43,86
Steering wheels MOTO-LITA
86
Steering XK120
42
Steering XK140 - XK150
43
Stone guards
55
SU carburetters & Tuning tips
25
SU synchronizer
25
SU tool kit
25
Sump guard
79
Suspension improvements
84
Switch for Ignition,overdrive,
lights,wiper,starter,heater….
53
Switches and cables
53
T
Tacho Cable
Thermostat
Thermostat housing
Timing chain
Tonneau covers
Trim kits & seats
XK150 DHC
XK150 FHC
53
22,32,80
22
16
74
75
W
Washer jets, bottle ,tubing sets
Water pump
Water pump kit UPRATED
WEBER carburettors
Wheel cylinder front,rear
Wheel ‘D’ type Wheels & tools
Wheels Special
Windscreen,washer &
wiper installation
Windscreens, rear window
& rear quarterlight Wing cover Jaguar
Wiper arm, blade, motor,
Wire set
Wire Wheel
Wire wheel hub
Wire wheel, competition
Wiring loom
Wiring loom,battery & electrical Walnut verneerd wood sets
& hood fittings
2 0 0 2
XK150 OTS
38,84
38,84
38
38
14
-S- Type 3.8cc
54
21
80
81
46
87
49
87
54
71
34
54
50
49
40
87
51
51
73
9
Cylinder head
10
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Cylinder head
Partn°
Description
187.014 Primer for aluminium
187.143 Green, 3.4 ‘B’ Type XK120-140-150
187.144 Blue, 3.8
187.145 Red, ‘C’ Type
187.146 Gold, 3.4 or 3.8 Straight port -S- Type
ILL N° PART N° QTY DESCRIPTION
APPLICATION
ILL N° PART N° 1 012.815 1 Cylinder head
XK120 up to W4690
012.816 1 Cylinder head
XK120 & 140 from W14691
012.817 1 Cylinder head, ‘C’ type
(Red if XK140)
012.818 1 Cylinder head 3.4L, light blue
XK150 till mid ‘59
012.819 1 Cylinder head 3.4L, light blue
XK150 from mid ‘59, ‘B’ type
012.820 1 Cylinder head 3.8L, dark blue
XK150 from end 1959, ‘B’ type
018.057 1 Cylinder head 3.8L ‘straight port’
XK150-S- , orange
2 012.821 1 RH cam cover ( only 8 fixing holes )
XK120 up to W4690
012.823 1 RH cam cover
XK120 from W4691 to W5652
012.825 1 RH cam cover
XK120 & 140 from W5653-on
012.829 1 RH cam cover ‘C’ type
012.825
1 RH cam cover
XK150
3 012.822 1 LH cam cover ( only 8 fixing holes )
XK120 up to W4690
012.824 1 LH cam cover
XK120 from W4691 to W5652
012.826 1 LH cam cover
XK120 & 140 from W5653-on
012.830 1 LH cam cover ‘C’ type
012.827
1 LH cam cover for mechanical rev.
XK150 up to approx. mid ’59
012.828 1 LH cam cover for electric rev.drive
XK150 from approx. mid ‘59
4 016.581 1 RH cover gasket, all 3.4 L.
XK120,140 & 150 with mechanical rev.
016.582 1 RH cover gasket, 3.8 L.
XK150 with electric rev.counter drive
5 016.581 1 LH cover gasket, both 3.4 & 3.8L
XK120,140 & 150
6 012.779 1 Oil filler cap, polished aluminium
7 168.201 1 Seal, filler cap
8 012.832 1 Dome nut & washer kit ( 52 pieces )
on cam covers & breather cover
9 161.652 26 Cam & breather cover nuts
Polished chrome
10 168.195 26 Copper washer
11 012.833 1 Cylinder head nuts & washer kit
12 161.651 14 Cylinder head nut
Polished chrome
13 163.241 14 ‘D’ Washer, bright chrome XK120
163.241 10 ‘D’ Washer, bright chrome
XK140 & 150
14 163.242 4 Round washer, bright chrome
XK140 & 150
15 012.834 1 Inlet camshaft, reprofield
XK120 standard
012.836 1 Inlet camshaft, 3/8” lift, reprofield
XK120 special and all XK140
012.639 1 Inlet camshaft, reprofield
XK150 and -S 16 012.835 1 Exhaust camshaft, reprofield
XK120 standard
012.837 1 Exhaust camshaft, 3/8” lift, reprofield XK120 special and all XK140
012.638 1 Exhaust camshaft, reprofield
XK150 and -S 17 012.808 1 or 2 Oil thrower
18 086.623 1 Shaft for rev. counter adaptor
XK120, 140
19 016.593 1 Oil seal
XK120, 140
20 016.599 2 Gasket, adaptor or blanking plate
XK120, 140
21 086.622 1 Rev. counter adaptor, mechanical
XK120, 1
©
V a n
G e s t e l
XK140 FHC
B & C
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
162.555
168.195
162.689
168.032
016.594
012.838
086.626
168.032
016.593
086.627
174.102
165.508
016.600
086.628
164.023
165.509
016.601
012.809
012.810
172.881
016.602
086.624
174.103
164.007
165.498
016.574
016.575
016.576
016.577
016.580
016.578
016.579
016.586
016.587
016.588
016.594
016.596
011.914
011.915
062.211
172.605
011.912
QTY DESCRIPTION
4
4
1
1
1
1
1
1
1
1
1
2
1
1
2
2
1
1
1
1
1
1
1
3
3
1
1
1
1
1
1
1
2
1
3
2
2
1
1
1
1
1
APPLICATION
Screw, adaptor or blanking plate
Washer, copper
Screw, oil thrower plate
XK150
Washer, copper
XK150
Sealing ring
XK150
Flanged blanking pate
Shaft, coupling
Early XK150 & mechanical rev.
Washer, copper
Oil seal on shaft
Adaptor plate for rev. box
Locking plate
Screw, adaptor plate to cyl. head
Gasket Early XK150 & mechanical rev.
Rev. counter box, on inlet camshaft
Washer spring
Screw, Allen head for rev. box
Seal between cover and rear bearing cap XK150 electric rev. drive
Adaptor piece
XK150 electric rev. drive
Driving dog
Circlip, driving dog to adaptor
‘O’ Ring
Generator for electric rev. counter
Locking plate
Washer, spring
Screw, allen head
CYLINDER HEAD GASKET SET
All 3.4 engines XK120, 140, 150
3.8 eng. XK150
3.4 eng. XK150 S
CYLINDER HEAD GASKET
3.8 eng. XK150 S
Bottom gasket set ( less oil seals )
All
Gasket, 3.4 eng. cylinder head
Gasket, 3.8 eng. cylinder head Gasket, exhaust manifold
All
Gasket, inlet manifold
All exept XK150S
Gasket, inlet manifold ( not illustrated ) XK150 S only
Sealing ring, at end of covers
Use only one for XK150 elec. rev
Gasket, breather cover
Baffle on breather
Breather housing
Breather pipe
Clamp, upper
Clamp, lower
XK120
Text continues next page >>>
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
11
Cylinder head
12
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Cylinder head
200.839
Cam alignment tool
56 011.913 1 Clamp, lower
57 167.294 4 Stud, breather cover
58 167.296 4 Stud, timing cover
59 167.293 6 Stud, head covers at front
60 167.304 16 Stud, cam bearing cap & cover
61 012.839 16 Ring-dowel on stud
62 163.252 16 Washer ‘D’
63 164.002 16 Washer, spring
64 161.002 16 Nut
65 011.863 3 Plug on top of cylinder head
66 168.198 3 Washer, copper
67 012.840 1 Kit, inlet manifold fixing
brass nuts)
012.841 1 Kit, inlet manifold fixing
brass nuts)
012.842 1 Kit, inlet manifold fixing
68 167.267 1 Stud kit, inlet manifold
167.352 1 Stud kit, inlet manifold 167.268 1 Stud kit, inlet manifold
167.269 1 Stud kit, inlet manifold
167.285 18 Stud, inlet manifold, stainless steel
70 161.030 19 Nut, brass
161.002 19 Nut, steel
71 012.843 1 Kit, exhaust manifold fixing
72 167.280 16 Stud, exhaust manifold
167.281 16 Stud, stainless steel, exhaust manifold
74 161.030 16 Nut, brass
75 011.878 1 Oil pipe assembly
76 165.415 3 Banjo bolt
78 011.916 2 Core plug
79 ………. 6 Exhaust valve seat for lead free
………. 6 Exhaust valve seat for lead free
………. 6 Inlet valve seat 80 012.807 12 Tappet guide
81 012.761 6 Inlet valve guide 46.43mm lenght
012.762 6 Inlet valve guide, bronze
012.763 6 Inlet valve guide 47.22 mm lenght
012.764 6 Inlet valve guide, bronze
012.765 6 Exhaust valve guide, 49.61mm
012.766 6 Exhaust valve guide, bronze
©
V a n
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° XK140-150
82
83
84
85
86
87
88
89
90
91
Not for early XK120 before W4690
XK120 (57 pieces and using XK140 (54 pieces and using XK150 & S (54 pieces with brass nuts)
XK120 ( 19 studs ) early
XK120 with spacer/heat blocks fitted
XK140 ( 18 pieces )
XK150 & 150S ( 18 pieces )
XK150 & 150S
Using brass nuts
For 36.57 mm exh. valve ‘49-‘60
For 41.30 mm exh. valve ’51-’79
For 44.5 mm inlet valve‘49-’54
Fit and ream
Oversize +0.005” XK120-140 ‘49-’57
As above but made from bronze
Oversize 0.005” XK150 ‘57-’60
Oversize+0.005” all
QTY DESCRIPTION
012.757 6
012.758 6
012.759 6
012.760 6
012.760 6
012.773 12
012.756 1
012.767 12
012.774 12
012.775 24
012.806 12
012.780 A/R
012.781 A/R
012.782 A/R
012.783 A/R 012.784 A/R
012.785 A/R
012.786 A/R
012.787 A/R
012.788 A/R
012.789 A/R 012.790 A/R
012.791 A/R
012.792 A/R
012.793 A/R
012.794 A/R
012.795 A/R
012.796 A/R
012.797 A/R
012.798 A/R
012.799 A/R
012.800 A/R
012.801 A/R
012.802 A/R
012.803 A/R
012.804 A/R
012.805 A/R
012.844 1
015.717 1
Inlet valve, 44.5mm, 30°, 104.3 mm L. XK120 - 140
Exhaust valve 36.57mm, 45°, 102.24 L XK120 - 140 for standard head
Inlet valve, 44.5mm, 45°, 105.60 L.
XK150 and 150S
Exhaust valve, 41.3mm, 45°, 103.70 L. XK120 - 140 C type head
Exhaust valve, 41.3mm, 45°, 103.70 L. XK150 - 150S
Cupped washer, spring seat
Valve spring set
Seal valve stem
If required
Collar, valve stem
Cotter, valve stem
Tappet
Valve adjusting shim, .085”, A
Valve adjusting shim, .086”, B
Valve adjusting shim, .087”, C
Valve adjusting shim, .088”, D
Valve adjusting shim, .089”, E
Valve adjusting shim, .090”, F
Valve adjusting shim, .091”, G
Valve adjusting shim, .092”, H
Valve adjusting shim, .093”, I
Valve adjusting shim, .094”, J
Valve adjusting shim, .095”, K
Valve adjusting shim, .096”, L
Valve adjusting shim, .097”, M
Valve adjusting shim, .098”, N
Valve adjusting shim, .099”, O
Valve adjusting shim, .100”, P
Valve adjusting shim, .101”, Q
Valve adjusting shim, .102”, R
Valve adjusting shim, .103”, S
Valve adjusting shim, .104”, T
Valve adjusting shim, .105”, U
Valve adjusting shim, .106”, V
Valve adjusting shim, .107”, S W
Valve adjusting shim, .108”, X
Valve adjusting Shim, .109”, Y
Valve adjusting Shim, .110”, Z
Adjusting shim assortiment BOX
Cam bearing set
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
APPLICATION
-S- Type 3.8cc
13
Pistons, crankshaft and engine bearings
14
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Pistons, crankshaft and engine bearings
APPLICATION
1 Info: Pistons and cylinder bore sizing
Pistons are supplied in sets of six and come complete with piston rings and piston pin.
It is recommended that all pistons are measured prior to final bore finishing adding the
Appropriate clearance as per the manufacturer’s specifications.
Piston Ring Sets. We supply ‘Grant’ or ‘Deves’ replacement sets manufactured in the USA.
014.660 1 Piston set, STD 3.4, XK120 - 140, 4 ring piston
014.662 1 Piston set, +020”
Compression ratio 8-1
014.663 1 Piston set, +030”
Standard bore 3.267” or 83mm
014.664 1 Piston set, +040”
014.666 1 Piston set, +060”
014.897
014.892
014.894
014.896
1
1
1
1
Piston set, STD
Piston set, +020”
Piston set, +040”
Piston set, +060”
3.4, XK120 - 140, 3 ring piston
014.670
014.672
014.673
014.674
1
1
1
1
Piston set, STD
Piston set, +020”
Piston set, +030”
Piston set, +040”
3.8, XK150, 3 ring piston
Standard bore, 3.425” or 87mm
014.680
014.682
014.683
014.684
1
1
1
1
Piston set, STD
Piston set, +020”
Piston set, +030”
Piston set, +040”
3.8, XK150, 3 ring piston
2 014.690 1 4 Ring set, STD
3.4 engines, 83mm standard bore
014.692 1 4 Ring set, +020”
2 comp 2mm and 2 oil 4mm
014.693 1 4 Ring set, +030”
Fits either original 3 ring Hepolite or 4 ring County
pistons
014.694 1 4 Ring set, +040”
Will NOT fit Brico pistons with
014.696
1 4 Ring set, +060”
shallow oil grooves.
014.700 1 4 Ring set, STD
3.4 engines, 83mm standard bore
014.702 1 4 Ring set, +020”
Fits Hepolite piston 11546, some
014.703 1 4 Ring set, +030”
original pistons and County CP410.
014.704 1 4 Ring set, +040”
014.706 1 4 Ring set, +060”
014.710 1 3 Ring set, STD
014.712 1 3 Ring set, +020”
014.713 1 3 Ring set, +030”
shallow
014.714 1 3 Ring set, +040”
014.716 1 3 Ring set, +060”
3.4 engine XK150, 83mm standard bore
Fits original Brico pistons with 014.720 1 3 Ring set, STD
014.722 1 3 Ring set, +020”
014.723 1 3 Ring set, +030”
014.724 1 3 Ring set, +040”
pistons
014.726 1 3 Ring set, +060”
3.8 engine XK150, 87mm standard bore
Fits Hepolite 18393, 16586 or 20615
Fits County CP411 or CP411A ©
V a n
G e s t e l
XK140 FHC
B & C
Oil grooves and Hepolite R2556 pistons.
APPLICATION
Our piston liners are parallel boring type, semi finished bore less 1mm.
Fitting instructions: measure each liner and machine cyl. block with appropriate interference fit.
3 014.669 6 Piston liner 3.4 eng.
Nominal :
3.267 x 3.393 x 6.978”
014.679 6 Piston liner 3.8 eng.
Nominal :
3.425 x3.562 x 6.980”
Diameter 69.837/69.850mm
4 015.700 1 Main bearing set, STD
015.701 1 Main bearing set, .010”
5 015.719 1 Thrust washer set
6 015.710 1 Con rod bearing set, STD
Diameter 52.984/53.00mm
015.711 1 Con rod bearing set, .010”
7 013.593 6 Con rod
XK120
013.594 6 Con rod with oil feed to end bush
XK140 - 150 not new, reconditioned
8 013.180 6 Small end bush
All
9 165.499 12 Bolt, con rod
10 161.669 12 Nut, self locking type
11 016.580 1 Conversion gasket set, bottom
Less front oil seal
12 016.725 1 Sump gasket ( two halfs )
XK120 - 140
13 016.585 1 Cork seal at rear of sump
XK120 - 140, early 150
016.618 1 Late type rear oil seal
XK150 late
14 016.572 1 Rope seal at front of sump
XK120, 140 (in two halfs)
016.573 1 Seal at from of sump
XK140, 150 from eng.G1908
15 011.917 1 Oil seal conversion kit
Need to machine crank to 75 mm
16 016.859 1 Oil seal only
17 013.620 1 Crankshaft
XK120 eng. W1001 to W1746
013.621 1 Crankshaft
XK120 eng. W1747 to W2645
013.622 1 Crankshaft
XK120, 140, 150 from
W2646 on
18 011.124 1 Spigot bush
19 172.888 2 Dowel pin, flywheel to crankshaft
20 011.876 2 Dowel, clutch to flywheel
21 165.539 6 Screw, flywheel to crankshaft
XK120 to eng.W2645
22 174.104 2 Locking plate
XK120 to eng W2645
23 165.430 10 Screw, flywheel to crankshaft
XK120, 140, 150 from
W2646 on
24 174.100 1 Lock plate
XK120, 140, 150 from
W2646 on
25 165.500 6 Screwed plug in crankshaft journals
XK120, 140, 150 from
W2646 on
26 172.886 4 Key, woodruff 27 011.918 1 Flywheel assembly, rebuild
XK120 to eng. W2645
011.877 1 Flywheel assembly, rebuild
XK120 eng. W2646 to W8274
011.877 1 Flywheel assembly, rebuild
XK140 , 150
28 011.866 1 Ring gear for flywheel
To be machiened to fit !
29 013.613 1 Gear, oil pump drive
30 013.614 1 Gear, timing
31 013.626 1 Oil thrower
32 011.932 1 Distance piece
33 011.928 1 Cone
XK120
34 011.903 1 Damper assembly
011.904 1 Damper assembly
XK140 & XK150
35 011.872 1 Pulley, 1949-‘54
XK120
011.873 1 Pulley, 1954-‘57
XK140
011.873 1 Pulley, 1957-Jun.’59
XK150 V1001 to V5732
011.873 1 Pulley, 1957-Jun.’59
XK150S VS1001 to VS1522
011.874 1 Pulley, June 1959- on, ½” belt
XK150 V5733 - on
36 163.253 1 Washer, special
011.927 A/R Shim
XK120
37 174.099 1 Locking plate
013.625 2 Distance piece, under locking plate
XK120
38 162.128 4 Bolt, pulley to damper
39 164.031 2 Washer, shakeproof
40 011.926 1 Jaw, for starting handle, to Jan’50
XK120 W1001 to W4816
41 165.538 1 Bolt, securing damper
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
15
Timing chains and dampers
16
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Timing chains and dampers
300.522
20W/50 Classic
Castrol Oil 4.5L.
300.501
20W/60 Classic
Penrite Oil 5L.
200.873
Chain adjusting tool
1 012.768 2
2 012.848 2
5 013.683 2
6 165.556 8
7 013.685 2
8 013.686 2
9 013.605 1
10 012.769 1
11 013.694 1
12 013.695 1
13 013.696 1
013.697 1
14 174.106 1
164.099 1
15 161.675 1
161.676 1
16 013.691 4
013.692 2
17 013.693 4
013.693 2
18 013.606 1
19 013.607 1
20 013.725 4
21 013.604 1
22 012.770 1
23 012.771 1
24 172.897 1
25 012.772 1
26 013.698 1
27 172.898 1
28 013.730 A/R
29 013.608 1
30 013.610 1
31 013.611 1
32013.709
1
171.082 1
33 013.710 1
013.712 1
34 013.711 1
013.713 1
35 013.702 1
013.703 1
36 013.704 1
37 013.705 1
38 013.706 1
39 016.621 1
40 162.029 2
164.007 2
41 013.612 1
162.605 2
ILL N° PART N° QTY ©
V a n
APPLICATION
Sprocket for camshaft
Adjusting plate assembly
Circlip
Screw, socket to campshaft
Star washer
Circlip
Upper timing chain
100 links
Idler sprocket, 21 teeth
Eccentric shaft
Plug, screwed
Adjustment plate, goes with double pins XK120 W1001 to W2330
Adjustment plate, single pin type
W2331 - on
Washer, locking
XK120
Washer, shakeproof
XK140 & 150
Nut
XK120
Nut
XK140 & 150
Pin, plugner
XK120 W1001 to W2330
Pin, plugner
W2331 - on
Spring for plugner pin
XK120 W1001 to W2330
Spring for plugner pin
W2331 - on
RH upper damper
Late type supplied
LH upper damper
Late type supplied
Distance piece
Lower chain
82 links
Intermediate sprocket, 20 teeth
Supersedes by 012.773
Intermediate sprocket, 28 teeth
Supersedes by 012.773
Key
Intermediate sprocket assembly
Shaft
Circlip
Shim
Intermediate guide,1955-on
From G4431-on
LH lower damper
Late type supplied
Tensioner blade, XK120
Spring, XK120 & 140
W1001 to W2213
Spring, XK120 & 140
W2214 to G4430
Pin, retaining spring in blade, upper
XK120 to eng.W4051
Pin, retaining spring in blade, upper
XK120 & 140 W4052 to G4430
Pin, retaining spring in blade, lower
XK120 to eng. W4051
Pin, retaining spring in blade, lower
XK120 & 140 W4052 to G4430
Oil spray bracket
XK120 to W3486
Oil spray bracket
XK120 & 140 W3487 to G4430
Ball, oil spray valve
W3487 - on
Seat for ball
W3487 - on
Spring
W3487 - on
Gasket
Screw
washer, shakeproof
Hydraulic chain tensioner
G4431 - on
Bolts, tensioner fixing
DESCRIPTION
APPLICATION
G e s t e l
XK140 FHC
B & C
Oil capacity
XK120 12L.
XK140 10.75L.
XK150 7.50L.
42 174.110 1 Tab washer
43 011.980 1 Filter gauze
44 011.889 1 Timing cover, XK120
oil seal)
011.890 1 Timing cover, XK120 & 140
011.891 1 Timing cover, XK140
017.003 1 Timing cover, XK150
45 016.572 1 Oil seal, 2 ropes
46 016.573 1 Oil seal
47 016.622 1 Gasket, timing cover, front
016.591 1 Gasket, timing cover, front
016.592 1 Gasket, timing cover, front
48 162.008 1 Bolt, 5/16”UNF x 1.1/2”
49 162.081 2 Bolt, 5/16”UNF x 1.3/4”
162.081 1 Bolt, 5/16”UNF x 1.3/4”
50 162.088 1 Bolt adjusting link, 5/16”x 2”
51 162.025 6 Bolt for waterpump, 5/16” x 2.3/4”
162..474 2 Bolt for waterpump, 5/16” x 3.1/4”
52 167.310 3 Stud for waterpump
53 167.282 2 Stud for cylinder head
54 167.311 4 Stud for sump
55 167.312 3 Special stud
167.313 1 Special stud
167.314 5 Special stud
161.026 5 Nut, 3/8”UNF on studs
56 162.048 4 Bolt, 3/8”UNF x 1.5/8”
162.066 1 Bolt, 3/8”UNF x 1.1/2”
162.066 5 Bolt
57 164.006 5 Washer, spring 3/8”
58 164.002 19 Washer, spring 5/16”
59 161.002 9 Nut, 5/16” UNF
60 081.676 1 Adjusting link, dynamo
081.678 1 Adjusting link, dynamo
61 081.677 1 Distance piece
62 167.309 4 Stud in rear bracket
64 161.019 4 Nut
65 165.557 4 Bolt, long
165.558 2 Bolt, short
67 013.687 1 Front mounting bracket
013.688 1 Front mounting bracket
68 013.689 1 Rear mounting bracket
013.690 1 Rear mounting bracket
69 165.558 2 Bolt, rear bracket to block
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
W1001 to W1913 (for 2 halfs W1914 to G1907 (for 2 halfs oil seal)
G1908 - on (for circular
oil seal)
XK120 & 140 to G1907
XK140 & 150 from G1908 - on
XK120 W1001 to W1913
XK120 & 140 to G1907
XK140 & 150 G1908 - on
XK120 from W1914 - on
XK140 & 150
XK120 use 6, XK140 & 150
use 4
XK140 & 150 only
XK120 W1001 to W1913
XK120 W1001 to W1913
XK120 W1914 - on
XK140
XK140
XK150
XK120, 140, 150 to V5732
XK150 from eng. V5733 - on
XK120 W1001 to W1913
XK120, 140 & 150 from W1914
XK120 W1001 to W1913
XK120, 140 & 150 from W1914
17
Engine block parts and engine mountings
APPLICATION
1 167.265 13 Stud, plain
2 167.266 1 Stud, dowel
3 167.279 A/R Repair stud, with 9/16” UNF block and thread
4 011.862 6 Plug, oil gallery
6 011.916 2 Core plug, small
XK120 at both sides
011.916 1 Core plug, small, RH side only
XK140 & 150
7 011.377 7 Core plug, large 1.3/4”
8 011.923 1 Plug 1”, sealing aperture for heater
Not used on early XK120
9 011.863 1 Plug, oil gallery rear, 7/8”
10 168.198 1 Copper sealing washer
11 011.921 1 Tab, water drain
12 165.415 1 Banjo bolt, oil pipe ( standard lenght )
165.416 1 Banjo bolt, oil pipe ( 7/16” longer )
14 011.909 1 Oil dipstick, high level = 8.1/16”
XK120 to W2057 ‘49-’50
011.892 1 Oil dipstick, high level = 8.11/16”
XK120 W2058 - on
011.910 1 Oil dipstick
XK140 G1001 to G1907
011.893 1 Oil dipstick, 52cm
XK140 G 1908 - on
011.911 1 Oil dipstick, 36.8cm
XK150 to V5059 & VS1303
011.893 1 Oil dipstick, 52cm
XK150 V5060 & VS1304 - on
15 011.894 1 Felt for dipstick
All
16 010.434 1 Sump, aluminium, flat base
XK120 to W2057 (16.5L.total)
010.430 1 Sump, aluminium, stepped base
XK120 W2058-on (13.5L. total )
010.431 1 Sump, steel
XK140 G1001 to G1907
(12.5L. total)
XK140 G1908 - on
(12.5L. total)
XK150 ( 8.5 L. total )
17 011.958 1 Ignition timing pointer
On steel sumps only
18 011.864 1 Sump plug
017.141 1 Magnetic sump plug
19 168.197 1 Sealing ring
20 162.045 1 Screw 5/16”UNF x 5/8” short
162.005 25 Screw 5/16”UNF x ¾” long
21 164.002 26 Washer, spring 5/16”
22 086.621 1 Oil level sending unit
XK120 to W 6130
011.934 1 Blanking plate
XK120 W6130 - on
18
ILL N° PART N° 23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
016.024
……
013.648
013.676
011.917
016.859
086.619
086.620
011.879
011.900
011.869
161.074
011.945
011.901
011.902
011.871
011.871
165.419
011.953
011.966
011.897
011.898
011.870
011.899
011.960
011.961
011.962
011.963
011.964
011.965
011.981
011.871
011.966
165.503
027.305
QTY DESCRIPTION
1
6
1
1
1
1
1
1
1
1
2
4
2
1
1
2
1
3
1
2
1
1
1
2
1
1
1
1
1
1
1
4
2
4
1
APPLICATION
Gasket
Screw
Filter basket inside the oil sump
Filter basket inside the oil sump
Oil seal conversion kit
Oil seal only
Oil pipe to gauge, original
Oil pipe to gauge, non original
Flexible pipe
Front eng. plate, early type
Engine mounting
Nut for mounting studs, 5/16”BSF
Packing piece, RHD only
RH Bracket, front
LH Bracket, front
Engine mounting, front Engine mounting, rear
Screw, mounting to bracket
Spacer for eng. stabiliser bolt
Packing piece, RHD cars only
Rear eng. bracket, LHD cars
Rear eng. bracket, RHD cars
Rear engine & gearbox mounting
Rear engine & gearbox mounting
RH Bracket, front
LH Bracket, front
RH Bracket, front
LH Bracket, front
RH Bracket, rear
LH Bracket, rear
Bracket, rear, pair Engine mounting, front or rear
Packing plate, rear
Screw, mounting to bracket
Overdrive buffer
©
V a n
XK140
XK150
Cranckshaft needs machining
Made from rigid copper
Made from flexible
From guage pipe to oil filter
XK120 up to Dec.1951
XK120 after Dec.1951
Stabilizer RH side
½” UNF ( ill. No 42 )
Rear
Fixed Head or Drop Head Coupé
Left Hand Drive cars
Right Hand Drive cars
XK120 early type
XK120 late type
XK140 G1001 to G1907
XK140 G1001 to G1907
XK140 & XK150 from G1908
XK140 & XK150 from G1908
XK140
XK140
XK150
XK140 & XK150
XK140 & XK150
½” UNF
XK140 & XK150
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Oil pumps
ILL N° PART N° APPLICATION
1 013.617 1 Drive shaft betw. distributor and oil pump XK120 coupling shaft
2 172.880 1 Key, Woodruff 50
XK120 Washer on top of bush 4013.619
1 Bush on drive shaft
XK120
5 013.616 1 Driving gear, oil pump & distributor
XK120
6 174.101 1 Special locking washer
XK120
7 161.671 1 Nut
XK120
8 013.634 1 Coupling shaft
XK120
9 013.627 1 Oil pump complete
XK120 W1001 to W2760
013.599 1 Oil pump complete
XK120 W 2761 - on
10 013.639 1 Filter for oil sump
XK120
11 013.638 1 Oil pipe from pump
XK120
12 016.612 1 Gasket, elbow to pump
XK120
13 016.611 1 Gasket, under outlet flange
XK120
14 016.610 1 Gasket, between pump body and cover XK120
15 013.631 1 Spindle for driven gear
XK120
16 013.636 1 Spindle for driving gear
XK120 W2761 - on
17 172.891 1 Key
XK120 W2761 - on
19 013.629 1 Gear driving ( incl. shaft )
XK120 W1001 to W2760
21 013.883 1 Replacement gear set
XK120 W1001 to W2760
013.650 1 Replacement gear set
XK120 W2761-on
30 013.617 1 Drive shaft between distributor and
XK140 up to W1907
coupling shaft
31 172.880 1 Key
XK140 up to W1907
32 013.619 1 Bush on drive shaft
XK140 up to W1907
33 013.633 1 Washer
XK140 up to W1907
34 013.616 1 Diving gear, oil pump & distributor
XK140 up to W1907
XK140 up to W1907
36 161.671 1 Nut
XK140 up to W1907
37 013.634 1 Coupling shaft
XK140 up to W1907
38 013.600 1 Oil pump assembly
XK140 up to W1907
39 013.661 1 Pipe from sump to pump
XK140 up to W1907
40 016.611 1 Gasket, flange to pump
XK140 up to W1907
41 013.662 1 Clip, pipe to strut
XK140 up to W1907
42 013.663 1 Strut, on bearing cap
XK140 up to W1907
43 013.664 1 Sealing plate
XK140 up to W1907
44 013.665 1 Spring
XK140 up to W1907
45 011.862 2 Plug
XK140 up to W1907
46 164.095 2 Locking washer
XK140 up to W1907
47 013.660 1 Oil pipe from pump to block
XK140 up to W1907
XK140 up to W1907
48 016.611 2 Gasket, flange end
©
V a n
G e s t e l
XK140 FHC
B & C
QTY DESCRIPTION
49 013.654 1 Spindle for driving gear
XK140 up to W1907
50 172.891 1 Key
XK140 up to W1907
51 013.651 1 Gear set, driving and driven gears
XK140 up to W1907
52 013.655 1 Spindle for driven gear
XK140 up to W1907
55 013.658 1 Relief valve
XK140 up to W1907
56 013.659 1 Spring
XK140 up to W1907
57 013.657 1 Stop
XK140 up to W1907
58 016.616 1 Gasket
XK140 up to W1907
60 013.618 1 Drive shaft between distributor and
XK140 & 150 from W1908 -on
coupling shaft
61 172.880 1 Key
XK140 & 150 fom W1908 - on
62 013.671 1 Bush on driven shaft
XK140 & 150 from W1908 - on
63 013.633 1 Washer
XK140 & 150 from W1908 - on
64 013.616 1 Driving gear for oil pump & distributor XK140 & 150 from W1908 - on
and drive shaft for distributor
XK140 & 150 from W1908 - on
66 161.671 1 Nut
XK140 & 150 from W1908 - on
67 013.615 1 Coupling shaft, driving gear in pump
XK140 & 150 from W1908 - on
68 013.601 1 Oil pump complete, orginal type
XK140 & 150 from W1908 - on
013.602 1 Oil pump complete, later type
Perfect alternative for 013.601
order adaptor No 013.666 to connect the XK140-150 small diameter pipe to the large inlet port of this pump.
69 013.670 1 ‘O’ Ring, pump outlet
XK140 & 150 from W1908 - on
70 013.672 1 Oil pipe, pump to block
XK140 & 150 from W1908 - on
71 016.611 1 Gasket
XK140 & 150 from W1908 - on
72 013.670 1 ‘O’ Ring for original pump, inlet
XK140 & 150 from W1908 - on
016.629 1 ‘O’ Ring to go with later type pumps
goes on pump 013.666
73 013.673 1 Oil pipe, sump to pump
XK140 from W1908 - on
013.678 1 Oil pipe, sump to pump
XK150
74 013.662 2 Clip
XK140 & early150 from W1908 - on
75 013.674 1 Strut on pump
XK140 & early150 from W1908 - on
76 013.675 1 Strut on bearing cap
XK140 & early 150 from W1908 - on
77 013.664 1 Sealing plate
XK140 & 150 from W1908 - on
78 013.665 1 Spring
XK140 & 150 from W1908 - on
79 013.668 1 Rotor kit, inner & outer
XK140 & 150 from W1908 - on
2 0 0 2
XK150 OTS
XK150 DHC
APPLICATION
XK150 FHC
-S- Type 3.8cc
19
Oil filter system
1 011.884 1 Early filter element, 13.6 cm long
011.885 1 Felt filter element, 11.4 cm long
011.886 1 Paper filter element, 11.4 cm long
2 168.205 1 Seal, rubber, canister to head
168.213 1 Seal, rubber, canister to head, 5mm
168.214 1 Seal, rubber, canister to head, 3mm
3 171.083 1 Spring
011.970 1 Spring
4 163.255 1 Washer on top of spring
163.258 1 Washer on top of spring
5 168.203 1 Washer, felt
168.212 1 Washer, felt
6 011.937 1 Pressure plate, upper
011.971 1 Pressure plate, upper
7 172.893 1 Circlip, lower plate
172.895 1 Circlip, lower plate
8 172.894 1 Circlip, upper plate
9 011.939 1 Pressure plate, upper
10 168.206 1 Washer, felt
11 011.940 1 Balance valve assembly
12 165.543 1 Bolt through filter
165.544 1 Bolt through filter
165.550 1 Bolt through filter
13 163.256 1 Steel washer
168.207 1 Washer, rubber
168.215 1 Washer, rubber
14 016.613 1 Gasket
15 165.549 1 Union, oil pipe flexible
16 168.204 1 Washer, fibre
163.259 1 Washer, fibre
163.260 1 Washer, fibre
17 168.208 1 Washer, fibre, relief valve sealing
18 013.643 1 Relief valve body
19 013.644 1 Valve
20 013.645 1 Spring
22 161.673 1 Nut, locking
23 013.646 1 Housing for relief valve spring
20
APPLICATION
ILL N° PART N° XK 120 W1001 up to W4382
XK120 & 140 from W4383
XK 120 & 140 from W4383
XK120
XK140 G1001 to G1907
XK140 G 1908 - on
XK120
XK140
XK120
XK140
XK120
XK140
XK120
XK140
XK120
XK140
XK120 & XK140
XK120 & XK140
XK120 & XK140
XK120 & XK140
XK120 W1001 to W4382
XK120 W4383 - on
XK140
XK120 & XK140 up to G1907
XK120 & XK140 up to G1907
XK140 G1908 - on
XK120 & XK140
XK120 & XK140
XK120
XK140 G1001 to G1907
XK140 G1908 - on
XK120 & XK140 from
G1908 - on
XK120 & XK140 from
G1908 - on
XK120 & XK140 from
G1908 - on
XK120 & XK140 from
G1908 - on
XK120 & XK140 from
G1908 - on
XK120 & XK140 from
G1908 - on
XK120 & XK140 from
G1908 - on
24 161.672 1 Nut, dome head
25 162.873 2 Fixing bolt, long
26 162.520 2 Fixing bolt, short
28 163.001 4 Washer, steel, plain
29 011.937 1 Canister, long type, early
011.942 1 Canister
011.969 1 Canister
30 011.740 1 Oil filter element, paper version, 5.8cm
31 016.010 1 Sealing ring, may come with element
32 011.984 1 Canister 33 011.985 1 Spring at bottom
34 011.986 1 Washer at top of spring
35 168.217 1 Washer, felt, under pressure plate
36 011.987 1 Pressure plate
37 165.553 1 Bolt through canister
38 016.043 1 Washer, rubber
39 011.988 1 Clip on bolt
40 011.989 1 Filter head 41 011.990 1 Adaptor, hose to sump
42 168.218 1 Sealing washer
43 011.991 1 Clamping plate on head
44 011.992 1 Anchor insert
45 013.677 1 Hose between cleaner & sump
46 172….
2 Clamp, hose
47 011.993 1 Plug in head
49 011.994 1 Union piece for flexible hose
51 011.995 1 Relief valve
52 011.996 1 Spring for relief valve
53 011.997 1 Dome nut, retainer
54 011.998 1 Stop pin
55 168.221 1 Washer under dome nut
56 017.002 1 Drain plug
57 168.222 1 Washer for drain plug
58 016.619 1 Gasket, cleaner head to block
59 162.481 1 Bolt, cleaner to block, 1.5/8”
162.081 1 Bolt, cleaner to block, 1.3/4”
61 163.001 4 Washer, steel
QTY DESCRIPTION
APPLICATION
©
V a n
XK120 & XK140 from
G1908 - on
XK120 & XK140
XK120 & XK140
XK120 & XK140
XK120 & XK140
XK120 W1001 to W4382
XK120 W4382 - on
XK140
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Water pumps
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
©
QTY DESCRIPTION
061.356 1 Water pump assembly
016.590 1 Gasket
061.358 1 Greaser
………. 1 Adaptor, by-pass
………. 1 Washer, fibre
062.222 1 Hose, by-pass
061.359 1 Spindle
061.360 1 Spindle
061.361 1 Bush for spindle
061.362 1 Seal on spindle
061.363 1 Seal on spindle
061.364 1 Front bearing
061.367 1 Rear bearing
061.365 1 Collar for front bearing
061.366 1 Circlip, front bearing retaining
061.368 1 Circlip in fan hub, rear bearing
061.369 1 Felt washer, front
061.370 1 Disc washer, front
061.372 1 Disc washer, rear
061.371 1 Felt washer, rear
061.373 1 Impeller front half
061.374 1 Impeller rear half
061.376 1 Impeller
061.377 1 Impeller
061.378 1 Pin
061.379 1 Dog, driving
061.380 1 Circlip, dog driving
061.381 1 Hub for fan
061.330 1 Pulley for fan
061.339 1 Fan, 5 blade
061.382 1 Grease nipple
174.111 1 Lock tap for nipple
162.203 5 Screw fan to hub
164.029 5 Washer, shakeproof
061.334 1 Fan belt
061.331 1 Pulley & hub assembly
061.343 A/R Balance piece
061.340 1 Fan, 6 blade
162.033 4 Screw, fan fixing
V a n
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° XK120 W1001 to W1050
XK120 W1051 to W1900
XK120 W1901 to W2669
XK120 W2670 to W5464
XK120 W5465 - on
XK120
XK120
XK120
XK120
XK120
XK120 W1001 to W1050
XK120 W1051 - on
XK120
XK120 W1001 to W1050
XK120 W1051 - on
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120 W1001 to W1050
XK120 W1001 to W1050
XK120 W1051 to W5464
XK120 W5465 - on
XK120 W1051 - on
XK120
XK120
XK120 W1001 to W5464
XK120 W1001 to W5464
XK120 W1001 to W5464
XK120
XK120 W1001 to W5464
XK120 W1001 to W5464
XK120 W1001 to W5464
XK120 W1001 to W5464
XK120 W5465 - on
XK120 W5465 - on
XK120 W5465 - on
XK120 W5465 - on
35
36
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
QTY DESCRIPTION
061.335 1 Fan belt
016.590 1 Gasket, pump to block
061.329 1 Repair kit
061.352 1 Carrier for pulley
061.332 1 Pulley
061.341 1 Fan, 8 blade
162.005 4 Fan & pulley fixing screw
164.060 4 washer, shakeproof
165.431 1 Screw, bearing retaining
161.362 1 Nut, locking
061.353 1 Elbow, heater connection
016.617 1 Gasket, water elbow
162.208 2 Screw, elbow fixing
062.215 1 Hose, to heater, return pipe
172….. 2 Clip
061.336 1 Fan belt
XK120 W5465 - on
XK120 W5465 - on
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
016.590 1 Gasket, water pump
061.329 1 Repair kit
061.354 1 Carrier for pulley
061.332 1 Pulley for fan, 02-’57 to 06-‘59
061.332 1 Pulley for fan, ’58 to 06-‘59
061.333 1 Pulley for fan, June 1959-on
061.342 1 Fan, 12 blade
162.022 4 Screw, fan & pulley fixing
165.431 1 Screw, bearing retaining
161.362 1 Nut, screw locking
061.353 1 Elbow, heater hose connection
016.617 1 Gasket
162.208 2 Screw, elbow to pump
061.336 1 Fan belt, ’57
061.337 1 Fan belt, ’58 to 06-’59
061.337 1 Fan belt, ’58 to 06-’59
061.338 1 Fan belt, 06-’59 to 04-‘61’
061.338 1 Fan belt, ‘59-’61 3.8 eng.
XK150
XK150
XK150
XK150
XK150 V1001 to V5732
XK150 VS1001 to VS1522
XK150 V5733 & VS1523 - on
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150 V1001 to V1597
XK150 V1598 to V5732
XK150 VS1001 to VS1522
XK150 V5732 & VS1522 - on
XK150 VA1001 & VAS1001- on
2 0 0 2
XK150 OTS
XK150 DHC
APPLICATION
XK150 FHC
-S- Type 3.8cc
21
Manifolds
22
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Manifolds
200.867
BSF Tap & die set
17 pieces
• 200.868
UNF Tap & die set
17 pieces
1 011.880 1
2 016.587 1
3 012.811 1
4 086.635 1
5 165.562 2
6 012.812 1
7 086.625 1
8 016.484 1
9 165.561 3
10 016.598 1
11 017.017 4
12 168.197 4
13 167.318 1
167.319 1
167.320 1
161.002 3
164.002 3
14 017.018 1
15 016.634 1
16 167.321 4
161.019 4
164.019 4
17 101.964 1
18 101.990 1
19 168.225 2
20 101.991 1
101.992 1
21 011.881 1
22 016.587 1
23 017.019 2
24 017.017 1
25 168.197 1
26 165.418 2
27 017.020 1
168.197 1
28 017.021 1
012.813 1
29 016.597 1
30 018.042 1
012.013 1
012.057 1
012.085 1
31 167.322 2
32 164.002 2
33 161.002 2
34 086.625 1
35 016.484 1
36 165.561 3
37 164.016 3
38 101.968 1
39 016.628 1
40 167.322 2
41 161.679 2
42 164.002 2
43 101.991 1
44 101.993 1
45 101.994 1
©
V a n
Inlet manifold
Gasket, manifold late type
Water outlet & thermostat housing
Thermostat, starter
Screw for thermostat
Water outlet & thermostat housing
Thermostat, starter
Gasket
Screw for thermostat
Gasket, water outlet
Plug in inlet manifold
Washer, copper
Stud, water outlet
Stud, water outlet
Stud, water outlet
Nut
Washer, spring
Flange for starting pipe
Gasket
Stud
Nut
Washer, spring
Starting pipe
Banjo bolt
Washer, copper
Anti blow-back valve
Spring for valve
Inlet manifold
Welch plug
Brass plug, underneath
Washer, copper
Chrome plated plug
Adaptor, temp. gauge
Washer, copper
Water outlet
water outlet
Gasket, water outlet
Original style 72° thermostat with the
bypass choosing system once the
thermostat is open
Thermostat, 74°C
Thermostat, 82°C
Thermostat, 88°C
Stud, water outlet
Washer, spring
Nut
Thermostat, starter
Gasket
Screw, UNC
Washer, shakeproof
Pipe, starting
Gasket, starting pipe
Stud
Nut
Washer, spring
Anti blow-back valve
Spring, tension
Sleeve
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° XK120
XK120
XK120 W1001 to W1250
XK120 W1001 to W1250
XK120 W1001 to W1250
XK120 W1251 - on
XK120 W1251 - on
XK120 W1251 - on
XK120 W1251 - on
XK120
XK120
XK120
XK120 W1001 to W1250
XK120 W1251 - on
XK120 W1251 - on
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120 W2449 - on
XK120 W2449 - on
XK140
XK140
XK140
XK140
XK140
XK140
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
XK140 up to May 1955
XK140 from May 1955 - on
Aftermarket
Aftermarket
Aftermarket
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK140
011.883
011.882
016.587
017.023
016.637
……….
………..
161….
063.390
168.197
017.020
168.197
012.814
167.084
167.317
164…
161…
101.996
101.997
101.998
161.266
101.989
108.003
172…
161.678
081.679
017.010
017.015
016.631
167.316
161.019
164.012
062.224
172.039
054.526
172.905
016.630
167..
164
161
108.004
017.008
016.588
110.299
110.300
016.586
161.030
164.002
167.280
167.281
016.589
167.288
167.289
167.290
200.475
200.476
164.006
161.006
QTY DESCRIPTION
APPLICATION
1
1
1
1
4
8
8
8
1
1
1
1
1
1
1
2
2
1
1
1
1
1
2
4
2
1
1
1
1
2
2
2
1
2
1
2
6
12
12
12
1
1
3
1
1
2
16
16
16
16
2
8
8
8
1
1
8
8
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150S only
XK150s only
XK150S only
Inlet manifold, early
Inlet manifold, late
Water outlet pipe
Gasket, manifold to pipe
Stud
Washer, spring
Nut
Adaptor for heater system
Washer, copper
Adaptor, temp. gauge
Wahser, copper
Water outlet elbow
Stud
Stud
Washer, spring
Nut
RH starting pipe into manifold
LH starting pipe into manifold
Starting pipe to carburettor
Olive
Tubing nut
Hose, connector
Clip
Sleeve nut, coil bracket
Bracket, ignition coil
Air balance piece
Adaptor, brake servo
Gasket
Stud
Nut
Washer, spring
Hose, adaptor to vacuum pipe
Clip
Vacuum pipe, servo
Clip, vacuum pipe
Gasket
Stud
Washer, spring
Nut
Starting pipe ass.
Inlet manifold set
Gasket, manifold to cylinder head
Exhaust manifold, front
Exhaust manifold, rear
Gasket, manifold to cylinder head
Brass nut, deep
Washer, spring
Stud, into cylinderhead UNF/UNC
Stud, into cylinderhead UNF/UNC
Gasket, down pipe
Stud, downpipe, 3/8”UNF
Stud, downpipe, 3/8”UNF
Repair stud, 7/16”x3/8”UNF
Tab to clean theads, 3/8”UNF
Tab to use repair stud, 7/16”UNF
Washer, spring
Nut, brass, deep 2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
made from steel, original
made from stainless steel made from steel, original
made from stainless steel
to repair the manifold
drill 9.9mm (drill No200.563)
3/8”UNF
23
Carburettor service kits & tools
24
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Carburettor service kits & tools
12
14
11
10
15
13
9
16
1 102.937 2
107.050 2
2 102.938 2
107.051 2
3 102.939 2
107.052 2
4 102.258 2
5 102.713 2
102.714 3
6 102.710 2
102.711 3
7 102.712 2
102.512 3
8 102.316 2
102.316 3
9 198.015 1
©
V a n
Gasket pack, one H6 1.3/4”
Gasket pack, one H8 2”
Service kit, one H6 1.3/4”
Service kit, one H8 2”
Rebuilding kit, one H6 1.3/4”
Rebuilding kit, one H8 2”
Sundries kit for one H6 or H8
Gasket pack, one HD6 1.3/4”
Gasket pack, one HD8 2”
Service kit, one HD6 1.3/4”
Service kit, one HD8 2”
Rebuilding kit, one HD6 1.3/4”
Rebuilding kit, one HD8 2”
Sundries kit, one HD carburettor
Sundries kit, one HD carburettor
Carburettor cleaner spray
for restoration and maintenance
G e s t e l
XK140 FHC
B & C
APPLICATION
XK120 & XK140
competition
XK120 & XK140
competition
XK120 & XK140
competition
XK120 & XK140
XK150
XK150 -SXK150
XK150 -SXK150
XK150 -SXK150
XK150 -S-
10 330.070 1
11 102.302 1
12 102.216 A/R
13 200.572 1
14 190.225 1
15 102.278 2
102.707 3
16 102.275 1
102.401 1
125ml carburettor oil
SU tool kit, 3 piece
Grose Jet: Improvement for the standard
needle and seat. This efficient fuel
cut-off is based on a ball system.
Carburettor synchronizer
Book, SU carburettors
For maintaining, tuning and restoration.
Also includes SU fuel pump repair.
Oversize shaft H6 or HD6
Oversize shaft HD8
Reamer tool for OVERSIZE shafts only.
This tool can be used on all SU’s: H, HD, HS types.
Once you have this tool, you can easily repair worn out
carburettors when an oversize shaft is required.
Reamer tool for STANDARD shaft to be used with bushes 102.113
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
APPLICATION
-S- Type 3.8cc
25
H6 and H8 carburettor parts
26
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
H6 and H8 carburettor parts
SU 2” H8 sandcast
carburettors for
XK120-140 ‘C’ type
specification
reproduced to original
specifications from factory drawings.
With genuine SU needles, jets, etc.
Complete with throttle lever, linkage
and choke interconnection.
1 102.177 2
102.979 2
2 102.080 2
3 102.010 2
102.983 2
4 102.012 6
102.272 6
5 102.360 2
102.982 2
6 102.932 2
102.314 2
107.057 2
107.053 2
102.959 2
107.010 2
107.054 2
102.969 2
102.971 2
102.970 2
102.959 2
102.972 2
102.981 2
107.055 2
107.056 2
7 016.250 4
8 016.261 2
7 016.485 6
8 101.628 4
9 016.222 2
016.487 2
10 102.329 1
11 102.936 2
102.501 2
12 102.093 2
13 102.091 2
14 102.629 2
102.278 2
107.001 2
102.707 2
15 102.113 2
16 102.265 2
102.841 2
17 102.050 4
18 102.077 2
19 102.075 2
102.370 2
20 102.076 2
21 102.078 2
22 102.071 2
102.989 2
23 102.389 2
102.216 2
102.990 2
24 102.330 2
102.992 2
25 102.074 2
26 102.068 2
102.986 2
27 102.334 2
102.988 2
28 102.079 2
29 102.080 4
©
V a n
Oil damper with solid brass cap
Oil damper with solid brass cap
Washer, fibre
Spring
Spring
Screw, zinc plated
Screw, brass
Screw, needle locking
Screw, needle locking
Needle, RB, standard
Needle, RF, standard
Needle, RG, weak
Needle, 53, rich
Needle, WO2, standard
Needle, WO3, weak
Needle, WO4, rich
Needle, SJ, standard
Needle, LBA, weak
Needle, SA, rich
Needle, WO2 for pancake airfilters
Neddle, SR for single airfilter
Needle, VR, standard
Needle, VE, weak
Needle, 75, rich
Gasket 1.3/4” carb. to manifold
Insulator 1.3/4” carb. to manifold
Gasket, 2” on each side from insulators
Insulator, 2”
Gasket, aircleaner side, 1.3/4”
Gasket, aircleaner side, 2”
Union for vacuum pipe, ignition
Jet bearing kit
Jet bearing kit
Cork seal, small
Cork seal, large
Shaft, standard size
Shaft, oversize
Shaft, standard size
Shaft, oversize
2 Bushes to repair for standard shaft
use reamer tool 102.401
Disc 1.3/4”
Disc, 2”
Screw, disc locking
Brass banjo & overflow pipe
Nut, cap made from solid brass
Nut, cap
Washer, upper, aluminium
Washer, lower, fibre
Gasket, lid float chamber
Gasket, lid float chamber
Needle and seat
Grose jet, see previous page
Needle and seat
Lever
Lever
Pin for lever
Fload
Fload
Lid, float
Lid, float
Banjo bolt
Washer, fibre
G e s t e l
XK140 FHC
B & C
Part nr.
Description
102.975
Pair carburettors 2” Sandcast
108.584
XK120 manifold for 2”
108.585
XK140 manifold for 2”
101.972
Fuel feed pipe
Spare parts
102.984
Jet
107.144
Needle & seat
APPLICATION
ILL N° PART N° H6
H8
30 102.082
31 102.724
102.724
102.986
32 102.934
33 102.195
102.994
34 102.061
102.080
35 102.245
36 102.244
37 102.945
38 102.946
39 102.944
40 102.953
41 102.952
42 102.947
43 102.948
44 102.949
45 102.950
46 107.058
47 102.929
102.930
48 102.769
49 102.946
50 102.961
51 102.762
52 102.964
53 102.080
54 102.079
55 102.761
56 102.963
57 102.772
58 102.773
59 102.774
60 102.751
61 102.328
62 102.044
63 102.045
64 102.933
65102.627
66 102.933
102.439
67 102.218
68 102.627
69 102.324
70 102.047
71 102.954
72 102.955
73 102.973
74 102.955
75 101.965
76 101.966
77 101.967
78 171.084
79 101.964
80 101.968
81 016.628
82 101.962
101.972
83 101.963
101.973
84 107.132
H6
H8
H6
H8
XK120 1949-’50
XK120 1951-’54 Roadster
XK120 FHC & DHC
XK120 FHC & DHC
XK120 FHC & DHC
XK140 standard head
XK140 standard head
XK140 standard head
XK140 ‘C’ head
XK140 ‘C’ head
H8
H8
H8
H6
H6 should be fitted to all types
H8
H8
H6
H8
H6
H8
H6
H6
H8
H8
H6 Ream body bosses to 9.5mm
H6
H8
H6
H8
H6
H8
H6
H6
H8
H6
H8
H6
H8
H6
H8
QTY DESCRIPTION
2
1
2
2
1
1
2
2
2
4
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
1
1
1
1
1
2
1
1
2
1
1
1
1
2
2
1
1
1
1
1
1
1
1
Filter in lid
Front float chamber
H6 XK120 ‘49-’50
Front or rear float chamber
H6 XK120 ‘50-on
Front or rear float chamber
H8
Rear float chamber & starter housing
H6 XK120 W1001 to W4095
Banjo bolt H6
Banjo bolt
H8
Washer, upper
H6
Washer, upper
H8
Washer, fibre
H6 & H8
Washer, intermediate
H6 & H8
Washer, aluminium
XK120 ‘49-’50
Washer, fibre
XK120 ‘49-’50
Bolt, rear float chamber (32)
XK120 ‘49-’50
Washer, fibre on jet
XK120 ‘49-’50
Thermostat jet
XK120 ‘49-’50
Solonoid
XK120 ‘49-’50
Plugner & valve
Spring
Circlip, solonoid cover securing
XK120 ‘49-’50
Fixing kit, screws & spring finger
Starting needle No8, weak
H6
Starting needle No4, rich
H6
Spring
H6
Washer, fibre to carb.body
H6
Holding up Bolt
Thermo & Float Chamber
Washer to thermo body
Connecting arm
Washer, fibre
Bolt, arm to thermo
Jet for thermo
Body, thermostat
Solonoid assembly
Cover, bakelite
Strap
Screw
Lever, throttle stop
Adjusting screw
Spring, adjusting screw
Lever on throttle spindle
Connecting shaft, cut to lenght
Lever on connecting shaft
XK120
Lever on connecting shaft
XK140
Ball-pin
Coupling shaft, cut to lenght
Coupling piece, incl. bolts
Lever on front carburettor
XK140
Flexible shaft, rear carburettor
2.1/8”
Adaptor for flexible shaft
Flexible on rear carburettor
RHD FHC 3.1/2”
Coupling
Operating shaft to scuttle bracket
XK140 LHD FHC
Ball-pin
XK140 LHD FHC
Bracket, return spring
Return spring
Starting pipe
XK120
Starting pipe
XK140
Gasket
Feed pipe assembly
H6
Feed pipe assembly
H8
Flexible pipe
H6
Flexible pipe
H8
Valve kit
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
APPLICATION
-S- Type 3.8cc
27
Carburettor parts HD6 & HD8 XK150 & XK150S
28
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Carburettor parts HD6 & HD8 XK150 & XK150S
Please note:
The quantity required for parts
not being specified HD6 or HD8
are the quantity as used for one pair
HD6 and should be altered to suit the triple
HD8. Levers and linkages shown on this page
are for HD6 carburettors.
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
©
QTY DESCRIPTION
016.222 2 Gasket, air intake, 1.3/4”
016.487 3 Gasket, air intake, 2”
016.250 4 Gasket, 1.3/4”
016.485 6 Gasket, 2”
016.261 2 Insulator, 1.3/4”
101.970 3 Insulator, 2”
107.008 2 Damper with solid brass cap
107.033 3 Damper with solid brass cap
102.080 A/R Washer, fibre
102.012 6 Screw, zinc plated
102.272 6 Screw, solid brass
102.010 2 Spring
102.983 3 Spring
102.011 2 Washer under spring
107.034 3 Washer under spring
107.009 2 Needle, TL, standard
102.969 2 Needle, SJ, weak
107.010 2 Needle, WO3, rich
107.035 3 Needle, UE
102.007 2 Screw, needle locking
102.754 2 Slow running adjustment kit
102.756 1 Gasket
102.012 2 Screw
164.015 2 Washer, spring
107.030 1 Adaptor for push-on connector
102.755 1 Adaptor plate
102.329 1 Union for vacuum, ignition advance
102.746 2 Bearing kit, jet
102.745 2 Housing for jet
102.742 2 Jet assembly & diaphragm 0.100”
102.833 2 Jet assembly & diaphragm 0.125”
102.741 2 Spring, diaphragm
102.044 2 Adjusting screw
102.045 2 Spring
102.767 8 Bolt, chamber mounting
107.012 1 Front float chamber
107.011 1 Rear float chamber
107.012 1 Front float chamber
107.011 2 Centre & rear float chamber
102.068 2 Float
102.330 2 Lever
102.074 2 Pin
102.315 2 Needle & seat
102.389 2 Needle & seat with viton head
102.216 2 Grose jet
102.071 2 Gasket
V a n
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° HD6
HD8
HD6
HD8
HD6
HD8
HD6
HD8
32 102.332 1
102.331 1
102.331 2
33 102.077 2
34 102.075 2
35 102.078 2
36 102.076 2
37 102.079 2
38 102.080 4
39 102.082 2
40 102.629 2
102.840 3
41 102.113 2
42 102.748 3
43 102.265 2
102.841 3
44 102.050 4
45 102.760 1
107.037 1
46 102.761 1
47 107.059 1
48 102.768 1
102.929 1
49 102.770 1
50 102.766 1
51 102.079 1
52 102.765 1
53 102.763 1
54 102.764 1
55 107.014 1
56 102.773 1
57 102.774 1
58 103.286 1
59 107.026 2
60 171.085 2
61 102.780 1
62 102.046 1
63 107.022 2
64 102.048 2
65 164.015 2
66 161.072 2
67 102.855 1
102.627 1
68 102.324 3
69 102.055 6
70 102.056 6
71 102.057 6
72 107.024 1
HD6
HD6
HD6
HD8
HD6
HD8
HD6
HD6
HD6
HD8
HD6
HD8
HD6
HD6
HD8
HD8
HD6 , for HD8 use 3 pieces
QTY DESCRIPTION
Lid, front carburettor
Lid, rear carburettor
Lid, centre & rear carburettor
Overflow pipe, cut to lenght
Cap nut, brass
Washer, fibre
Washer, aluminium
Banjo bolt
Washer, fibre
Filter
Shaft, standard
Shaft, standard
Repair bush, ream body to 9.5mm
Seal kit for one carburettor shaft
Disc 1.3/4”
Disc, 2”
Screw
Thermostat body
Thermostat body
Jet, acceleration needle
Dust shield fixing kit
Acceleration needle
Acceleration needle
Spring
Washer kit
Banjo bolt
Banjo bolt
Bracket
Connecting arm
Solonoid assembly
Cap, solonoid
Strap
Screw, clamping
Bracket, return spring
Throttle return spring
Lever, throttle stop
Pin
Lever, throttle return spring
incl. bolt, nut & washer
Bolt
Washer, spring
Nut
Connecting rod, 4.7cm
Connecting rod, 9.5cm cut to lenght
Coupling assembly
Bolt
Washer, plain
Nut
Lever to throttle control rod
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
HD6 or HD8
HD6
HD8
HD6
HD8
HD6 ( for HD8 use 6 pieces )
HD8
HD6
HD8
HD6
HD8
HD6
HD8
29
Air filters & accelerator pedal
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
101.135
101.135
108.007
108.008
172.910
108.013
172.911
101.043
063.017
108.017
108.019
108.018
172.268
108.021
016.222
101.135
108.010
108.009
108.116
101.069
108.118
108.117
108.115
108.120
016.222
30
QTY DESCRIPTION
2
1
1
1
1
1
2
1
1
1
1
1
4
2
2
2
1
1
1
1
2
1
1
1
2
LHD Air filter assembly
RHD Front air filter
RHD Rear air filter
Air cleaner assembly
Clip, air cleaner to elbow
Elbow, at bottom of wing valance
Clip, air hose ends
Clamp, air hose to body
Air hose, elbow to branch
Branch, air intake
Short, front, hose
Long, rear, hose
Clip
Adaptor, hose to carburettor
Gasket
1.3/4” Air cleaner assembly
2” Air cleaner, front
2” Air cleaner, rear
Air cleaner assembly, reproduction
Replacement element for reproduction
Front bracket
Rear bracket
Coupling seal
Air intake casting
Gasket, 1.3/4”
APPLICATION
ILL N° PART N° XK120 OTS
XK120 OTS
XK120 OTS
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK120 DHC & FHC
XK140 OTS
XK140 with ‘C’ head
XK140 with ‘C’ head
XK140 & XK150 LHD
Will not fit original air cleaner
22
23
24
25
108.108
108.114
108.113
108.128
108.129
016.487
1
1
1
1
1
3
Connecting hose
Air intake
Replacement element only
Gasket, 2”
XK150 RHD
XK150 RHD
XK150 RHD
XK150 -SXK150 -SXK150 -S-
30
31
32
33
34
35
40
108.046
108.181
108.048
108.074
108.050
027.352
108.051
108.133
108.133
108.134
108.050
108.137
108.271
108.586
108.277
108.587
108.588
101.943
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
LHD Accelerator pedal
LHD Accelerator pedal
RHD Accelerator pedal
RHD Accelerator pedal
Rubber pad, accelerator 17x3.8cm
Felt bush, accelerator pedal
Fulcrum bush
Accelerator pedal
Accelerator pedal
Roller for accelerator pedal
Linkage set, LHD
Linkage set, LHD
Linkage set, LHD
Linkage set, LHD
Linkage set, LHD
One link only, universal
XK120
XK140
XK120
XK140
XK120 & 140
XK140 & 150
XK120 & 140
XK150 S LHD & RHD
XK150 RHD
XK150 S all
XK150 LHD
XK140 & XK150 LHD
QTY DESCRIPTION
APPLICATION
©
V a n
XK120
XK140 OTS, DHC
XK150 LHD early manual
XK150 late
XK150-SG e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
XK fuel tanks, fuel pumps & fuel lines
1 100.069 1
100.070 1
2 108.227 1
3 168.256 1
4 108.212 1
5 138.158 1
6 134.790 1
7 100.071 1
100.108 1
100.107 1
100.109 1
8 139.153 1
9 121.089 A/R
10 172.966 5
172.966 8
11 172.978 1
172.979 1
12 101.977 1
108.247 1
101.983 1
108.248 1
13 101.986 2
14 168.223 4
15 101.652 1
©
V a n
Aluminium fuel tank
Aluminium fuel tank
Filter for bottom for steel tank
Gasket for filter
Filler hose
Petrol tank support tray
Set of 4 rods
Aluminium fuel tank
Heavy duty steel tank, breather
in pillar neck
Heavy duty steel fuel tank with
breather pipe
Aluminium fuel tank
Fuel tank fixing kit
Black felt strip, 33 x 4 mm
Clip, pipe to chassis
Clip, front pipe to dash
Clip, rear pipe to bumper bracket
Fuel filter assembly
Fuel filter assembly with push-on
connectors
Fuel filter element, 38 mm dia.
Fuel filter element, 50 mm dia.
banjo bolt
Washer, fibre
Fuel pump asembly
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° XK120 OTS & FHC
XK120 DHC
All
All
XK120
XK120
XK120
XK140 & 150
XK140 - (early) 150
16 108.231 1 Mounting kit for one pump
17 107.093 2 Banjo bolt
18 102.080 4 Washer, fibre
19 101.002 1 Rubber cover for fuel pump
20 108.214 1 Tank sending unit 108.216 1 Tank sending unit
21 016.024 1 Gasket, cork
22 165.751 6 Screws for original tank
6 Screw for reproduction tank
30 108.222 1 Fuel pipe set, 3 pieces
32 108.225 1 Fuel pipe kit, 3 pieces
33 101.963 1 Fuel hose, flexible
34 101.985 1 Fuel pipe to filter
35 101.976 1 Fuel hose, flexible, coming from filter
37 108.238 1 Fuel hose, flexible, from rear
38 108.239 1 Fuel hose, flexible, to front
39 101.963 1 Fuel hose, flexible, to filter
101.963 1 Fuel hose, to carb.feed pipe
40 101.962 1 Carburettor feed pipe
41 101.974 1 Carburettor feed pipe, 1.3/4” carb. 42 101.975 1 Carburettor feed pipe, 1.3/4” carb.
43 108.374 1 Carburettor feed pipe, 2” carb.
44 108.321 A/R Nipple, pipe to pump
45 108.322 A/R Cone end piece, fuel pipe
46 108.233 1 Ventilation hose
XK150 Oct. 1959-on
XK150 Oct. 1959-on
XK140 & XK150
Sold by the running meter
XK120 & 140
XK150
XK120 & 150
XK150 When fitted (original)
Replacement Type
150’S’ use 2 pumps
QTY DESCRIPTION
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
150’S’ use 2 kits
150’S’ use 4 bolts
150’S’ use 8 washers
XK120
XK140 & 150
XK120
XK140 & early 150
XK150
XK150
XK150
XK150
XK150’S’ (no hoses !)
XK150’S’
XK150’S’
XK150’S’
XK120 & 140
XK120 & 140
XK150 when no filter is fitted
XK150 cars with fuel filter
XK150’S’
Pipe repair piece
To be soldered on the fuel pipe
XK150 Oct. 1959-on
31
Cooling and heater products
Universal hose 86cm long
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
40
41
060.068
061.415
134.791
134.792
121.061
232.293
061.417
168….
061.418
012.013
018.042
016.595
062.237
062.222
062.239
062.005
017.020
060.070
060.072
061.415
061.419
061.421
041.760
061.422
011.921
134.795
136.489
062.244
062.245
062.247
062.246
061.423
061.424
061.425
061.426
062.214
060.074
061.419
32
QTY DESCRIPTION
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
1
2
1
1
1
1
1
1
1
1
2
1
1
1
Aluminium radiator
Filler cap, reproduction
Tie down rod
Steady rod
Pad, radiator to shassis (set)
Radiator drain panel
Drain tap
Washer, fibre
Thermostat housing
Thermostat 74°C, thermostat
By pass type, OE
Gasket, housing to radiator
Top hose
By pass hose
Bottom hose
Overflow pipe
Adaptor, thermo gauge
Aluminium radiator, smooth top
Aluminium radiator, ribbed top
Cap 4lbs, repro
Cap 7lbs, repro
Pair radiator brackets
Mounting bush
Distance piece
Drain tap
Steady bracket
Fan cowling
Top hose , 17cm long, 3 bow
Top hose, 21cm, 2 bow
Lower hose to pump
Lower hose to pipe
Water pipe
Lower clip
Upper clip
Packing
By-pass hose
Radiator, aluminium
Filler cap
APPLICATION
42 061.427 1 RH Bracket
061.428 1 LH Bracket
43 136.492 1 Cowl, top
44 136.493 1 Cowl, lower
45 061.417 1 Drain tap
46 172.075 2 Clip, overflow
47 062.250 1 Top hose, 30 cm
48 062.246 1 Bottom hose to pipe
49 061.429 1 Water pipe
50 061.425 1 Pipe clamp
51 061.426 1 Packing
52 062.251 1 Hose to pump
53 063.005 1 Overflow hose
54 061.446 1 Aluminium expansion tank
061.447 1 Aluminium expansion tank
60 063.188 1 Heater matrix, reproduction
61 063.483 1 Heater matrix, reproduction
62 142.108 2 Defroster outlet, chrome
63
A/R Air hose, see our Tool catalogue
64 062.218 1 Return pipe
063.561 1 Set of 4 steel heater pipes
65 063.391 1 Heater valve, less knob
66 063.392 1 Knob
67 063.444 1 Bracket, heater valve
68 063.485 1 Heater valve
69 168.100 1 ‘O’ Ring
70 172.056 1 Cable connector
71 162.135 1 Screw
72 142.185 1 Surround, heater control panel
73 063.473 1 Knob, heater control
74 061.344 2 Banjo, two when heater is fitted
75 165.501 1 Banjo bolt, when heater is not fitted
76 165.502 1 Banjo bolt, when heater is fitted
77 062.327 1 Long heater hose, cut to length required
78 172.039 A/R Clamp for heater hose
79 061.479 1 Clamp set ( except for heater hoses )
061.480 1 Clamp set ( except for heater hoses )
Cut into 4 pieces
Bolts on radiator
Aftermarket
Orignal with sleeve
Early XK140 - Not illustrated
Late XK140 - Illustrated
Early XK140 to OTS 822423
Late XK140
Early XK140 ’54-‘55
Late XK140 ’55-‘57
XK140 & 150
XK150
QTY DESCRIPTION
APPLICATION
©
V a n
XK120 & 140 inprovement
XK150 improvement
XK120 & 140
XK150
XK120 & 140
XK150
XK120 & 140
XK120 & 140
XK120 & 140
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK120
XK120
XK120
16 to 25 mm
XK120 ( 6 pieces )
XK140 & 150 ( 8 pieces )
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Clutch system
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
©
021.118
021.131
021.120
021.132
021.119
021.091
021.095
021.002
200.846
027.336
027.313
027.311
027.353
027.306
027.312
027.313
171.119
171.118
027.349
027.327
027.372
054.637
027.341
171.089
027.332
027.348
027.333
027.350
027.352
172.917
174.138
027.321
027.343
172.886
163.247
027.322
027.323
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
Clutch kit, 3 pieces, 10” diaphragm
Clutch kit, 3 pieces, 9.1/2” diaphragm
Release bearing
Release bearing, diaphragm
Clutch cover
Clutch plate, 10”
Clutch plate, 9.1/2” Retaining clip
Clutch aligning tool
Fork, clutch operating
Taper pin, use 162.433
Operating shaft
Operating shaft
Bush in clutch housing
Operating lever
Taper pin, use 162.433
Return spring, hydraulic system
Anchor plate
Screw, spring to trunion
Adjusting rod, pedal to lever
Push rod, slave cylinder to lever
Barrel nut
Trunion
Spring
Pedal rubber 13.8 x 40 mm
Pedal rubber ….. x .. mm
Draught excluder, rubber
Draught excluder, rubber
Draught excluder, felt
Circlip
Lock tab set, bellhousing to gearbox
Cross shaft
Cross shaft
Woodruff key
Washer at spring end
‘O’ Ring
Shaft bearing
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° Original, illustrated
Improved type
32 027.328 1
33 027.329 1
34 171.090 1
35 027.324 1
36 027.325 1
37 171.087 1
38 027.340 1
39 027.326 1
40 172.009 1
41 171.091 1
42 171.093 1
43 027.407 1
44 027.360 1
45 027.362 1
46 172.919 1
47 027.368 1
48 171.094 2
49 027.369 1
50 053.513 1
51 052.163 1
52 052.331 1
53 085.074 1
54 052.704 1
55 137.446 1
56 053.235 1
57 052.585 1
58 052.584 1
59 161….
1
60 027.367 1
61 172.918 1
62 027.370 1
63 052.586 1
64 054.741 1
65 054.551 1
XK120 & 140
XK150
XK150
XK150
XK150
XK120 & 140
XK150
XK120 & XK140 OTS & DHC
XK140 FHC & all XK150
XK120
XK140 OTS & DHC
XK140 FHX & all XK150
XK140 & 150
XK120
XK140
XK120 & 140
XK140
XK120 & 140
XK120 & 140
QTY DESCRIPTION
Bearing housing
Rubber boot on housing
Spring behind bearing
‘O’ Ring
Washer, end of shaft
Spring on shaft
Distance collar, pedal to frame
Lever on pedal shaft
Clevis pin
Pedal return spring
Pedal return spring
Pedal mounting kit
Pedal bearing assembly
Grease nipple
Clevis pin
Lever, bell-crank
Spring
Anchor bolt
Reservoir & cap
Cap
Seal for cap
‘Girling’ lable
Clip, reservoir to bracket
Bracket
Clutch master cylinder 5/8”
Repair kit, 5/8”
Push-rod
Locking nut
Fork
Clevis pin
Clutch slave cylinder
Repair kit, slave cylinder
Clutch pipe kit LHD
Kit details:
1 connection hose and 4 pipes
High pressure hose
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK120 & 140
XK120 & 140
XK120 & 140
XK120 & 140
XK120 & 140
XK120 & 140
XK140
XK120 & 140
XK120 & 140
XK120 & 140
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
33
Gearbox parts
34
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Gearbox parts
159.328
Padded wing cover “Jaguar”
Penrite oil information
Jaguar XK120-140-150
Description
Partn° 5L.
Partn° 1L.
Engine XK120 Flat sump
16.50L.
HPR 20W/60
300.501
300.101
Engine XK120 Stepped sump
13.50L.
HPR 20W/60
300.501
300.101
Engine XK140
12.50L.
HPR 20W/60
300.501
300.101
Engine XK150
8.50L.
HPR 20W/60
300.501
300.101
Gearbox
1.50L.
Gear oil 30
300.511
300.111
Gearbox + overdrive
2.25L.
Gear oil 30
300.511
300.111
Axle XK120
1.70L.
Mild EP
300.516
300.116
Axle XK140
2.00L.
Mild EP
300.516
300.116
Axle XK150
1.50L.
Mild EP
300.516
300.116
XK120 1948-’51 non overdrive XK120 1952-’54 non overdrive XK140 1954-’57 non overdrive XK140 1954-’57 for overdrive XK150 1957-’61 non overdrive XK150 1967-’61 for overdrive 1 016.649 1 Gasket set
2 024.541 1 Magnetic drain plug & washer
3 024.702 1 Oil dipstick, non overdrive type
024.830 1 Oil dipstick, overdrive type
4 024.708 1 Bush for pivot jaw
5 024.712 1 Pin, selector lever
6 024.715 1 Double spring washer
7 161.111 2 Slotted securing nut
8 024.711 1 Spring/washer
9 024.713 1 Bush, horizontal
10 024.705 2 Flexible bushing, vertical
11 161.092 1 Nut, change speed
12 024.537 1 Gear lever, cranked
024.537 1 Gear lever, cranked
024.537 1 Gear lever, cranked
13 024.538 1 Gear lever, straight
024.538 1 Gear lever, straight
14 161.698 1 Locking nut, chrome plated
15 024.704 1 Gear lever knob
16 024.837 1 Gear lever knob
17 173.029 1 Clip, leater retainer
18 083.052 2 Switch for reverse or overdrive
19 168.233 3 Felt washer, stricking dog
20 016.654 1 Oil seal rear 031.014 1 Oil seal rear
21 016.653 1 Oil seal front, O.D. 60mm
016.656 1 Oil seal front, O.D. 47mm
22 023.281 1 Front bearing, pinion shaft
23 024.672 1 Bearing, main shaft
024.789 1 Bearing, main shaft
24 031.015 1 Bearing, rear extension
25 024.680 1 Bearing, speedodrive
26 024.178 82 Needle bearing, main shaft
27 024.734 1 Needle bearing assembly
28 024.751 58 Needle bearing, countershaft
29 024.749 1 Layshaft
30 024.727 2 Plugner, mainshaft
31 024.728 2 Spring under plugner
©
V a n
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° JH or SH type
JL type
JL or SL type
JLE type
JL type
JLS type
32 024.692 12 Spring under ball
33 024.691 12 Ball
34 168.231 1 Fibre washer in gearbox case
35 161.662 1 Nut, non overdrive
Parts below are not available new and we need your complete gearbox serial number
to identify the part required. Anglo Parts will try to find your required spare part in
secound hand but useable condition.
36 024.733 1 Constant pinion shaft
XK120 SH
024.817 1 Constant pinion shaft
XK140 SL
37 024.735 1 Pinion, constant
XK120 SH & XK140 SL
38 024.736 1 Oil thrower
XK120 SH & XK140 SL
39
1 Constant pinion shaft
40
1 Oil thrower
41
1 Nut, locking bearing to shaft
42
1 Sleeve, 3dr/top speed
43 024.770 1 Sleeve synchro 3rd/top speed
XK120 JH, 140 JL, JLE
1 Sleeve synchro 3rd/top speed
XK120 SH, 140 SL, 150
44
2 Washer thrust 2nd & 3rd gear
45
1 Gear 1st speed
46
1 Gear 2nd speed
47
1 Gear 3rd speed
48
1 Mainshaft
49
1 Sleeve, distance
50
1 Sleeve, synchro.2nd speed
51
1 Gear, speedodrive
52
1 Flange
53
1 Gear, reverse
54
1 Shaft, reverse
55
1 Laygear ( cluster )
56 024.752 3 Ring, retaining
57
1 1st Gear on countershaft
58
1 2nd Gear on countershaft
59
1 3rd Gear on countershaft
60
1 Wheel
, constant
61 134.724 1 Propshaft assembly 78.5cm (closed)
XK120 early
134.725 1 Propshaft assembly 93 cm (closed)
XK120 late
134.726 1 Propshaft assembly, non overdrive cars XK140 & 150
134.727 1 Propshaft assembly, overdrive cars
XK140 & 150
62 033.060 2 Propshaft bolting kit With ‘D’ head bolts
63 032.194 2 Universal joint assembly
64 032.046 2 Grease nipple only
65 061.382 1 Grease nipple
66 032.392 2 Flange
67 026.150 2 Pair felt bushes , dipstick
XK120 ( exept JL with radio )
XK140 OTS+FHC without radio
XK150 ( exept for very late once )
XK120 JL & radio
XK140 ( most with radio )
XK120-140 & early 150
Late XK150
When no overdrive is fitted
Overdrive ( not illustrated )
XK120-140 & 150 3.4
XK150 3.8
XK120 ’48-’51 JH & SH ONLY
1952-on
XK120 ‘48-’51 JH & SH ONLY
Non overdrive only!
First motion shaft
QTY DESCRIPTION
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
35
Overdrive
APPLICATION
Overdrive repair service:
We remanufacture your own unit, normally within two weeks. It is possible to have your
overdrive repaired to the original specification or to uprated competition spec.
All overdrives are rig tested and come with a six month warranty. Overdrive parts listed below
are the most common but other parts are available on request aswell.
1 020.185 1 Rebuild overdrive 28/1390
XK140 10-’54-on
020.181 1 Rebuild overdrive 28/1516
XK150 3.4
XK150’S’ 3.4
XK150’S’ 3.8
2 016.499 1 Gasket and seal kit
3 025.440 1 Spring set , 8 piece
025.386 1 Spring set, 12 piece
3.4
025.412 1 Spring set, 12 piece
3.8
4 081.281 1 Solonoid assembly
5 025.371 1 Adaptor, not supplied with overdrive
6 025.372 1 Steel washer behind g/box rear bearing
7 172.927 1 Circlip 1.3/8”
8 025.375 1 Operating cam
9 025.214 1 Circlip 1.7/8”
10 025.388 1 Bearing
11 025.216 1 Circlip 90mm
36
ILL N° PART N° 12
13
14
15
19
20
21
22
23
24
25
26
27
28
29
30
31
32
025.387
025.441
025.442
025.391
025.369
025.069
025.392
041.632
041.632
161.303
025.390
025.170
025.167
025.042
025.168
025.318
025.319
027.305
025.400
086.843
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
APPLICATION
Sliding member, exchange
1.1/2” Accumulator, complete
1.1/8” Accumulator, complete
Planetary carrier assembly
Complete UDC assembly
Bronze thrust washer
Annulus, exchange
Bearing, annulus
Bearing, rear end
Nut
Sungear
Filter
Plugner, oil pump
Spring
Body, oil pump
Operating piston, 3 ring type
Operating piston, 1 ring type
Overdrive buffer
Speedodrive assembly
Cable box
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Exhaust System
1 110.312 1
2 110.320 1
3 110.321 1
4 110.322 1
5 110.313 1
6 110.323 1
7 110.324 1
8 110.325 1
9 110.326 1
10 110.327 1
11 110.328 1
12 110.314 1
13 110.329 1
14 110.330 1
15 110.331 1
16 110.332 1
17 110.327 1
18 110.328 1
19 110.315 1
110.316 1
20 110.334 1
110.333 1
21 110.335 1
22 110.336 1
23 110.337 1
24 110.338 1
25 110.339 1
©
V a n
Exhaust system assembly, Single tail pipe system
Twin front pipe
Main silencer
Polished tail pipe
Exhaust system assembly,
Twin tail pipe system
LH Front pipe
LH Flexible section
RH Front pipe
RH Flexible section
Main silencer
Twin tail pipes, polished ends
Competition system assembly
Front manifold
Rear manifold
LH Link pipe
RH Link pipe
Silencer
Twin tail pipes
for cars with an manual gearbox
Exhaust system assembly, for cars with an automatic gearbox
RH Front pipe, for manual gearbox
RH Front pipe, for automatic gearbox
LH Front pipe
RH Silencer
LH Silencer
RH Tail pipe
LH Tail pipe
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° XK120 1948-‘54
26 110.317 1
110.318 1
27 110.340 1
28 110.341 1
29 110.319 1
30 110.342 1
31 110.343 1
32 110.344 1
33 110.345 1
36 110.348 1
37 110.349 1
38 111.221 1
111.222 1
111.223 1
39 111.209 1
40 111.214 1
41 111.011 A/R
111.193 A/R
111.067 A/R
111.296 A/R
42 136.514 1
136.830 1
43 111.066 A/R
44 111.099 A/R
45 111.217 A/R
XK120 1950-‘54
XK120
XK140-150
XK140-150
QTY DESCRIPTION
with straight thru’silencer
for manual gearbox
with straight thru’silencer
for automatic gearbox
RH Silencer, straight tru
LH Silencer, straight tru
Competition system assembly,
for manual gearbox cars only
Front manifold
Rear manifold
RH Link pipe
LH Link pipe
RH Large bore (2”) tail pipe
LH Large bore (2”) tail pipe
Exhaust fitting kit
Exhaust fitting kit
Exhaust fitting kit
Bracket, silencer
Bracket, twin tail pipe
48mm Clamp
54mm Clamp
58mm Clamp
62mm Clamp
One heat shield panel
One pair heat shield panels
Round exhaust mounting
Silencer mounting Tail pipe mounting
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK140-150
XK140-150
XK140-150
XK120 single line
XK120 dual line
XK140-150
XK120
XK120 twin tail pipe
XK120
XK140-150
XK120
XK140-150
XK140-150
37
Rear suspension & axle
38
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Rear suspension & axle
We are always happy to look for a good second-hand chassis.
At the moment (2004), a good second-hand is better than an incorrect new one.
1 032.789 1
2 032.810 2
3 032.809 2
4 032.790 2
5 032.790 2
6 032.780 1
7 032.784 1
8 032.118 1
032.119 1
10 161.705 1
11 032.837 1
12 032.838 1
13 016.214 2
016.620 2
14 016.659 2
15 032.853 A/R
032.854 A/R
032.855 A/R
16 032.851 2
17 032.875 2
18 161.683 2
19 163.262 2
20 032.852 2
21 032.850 2
22 134.728 2
23 032.116 1
032.117 1
032.120 1
032.121 1
24 167.054 10
161.044 10
164.021 10
25 032.860 2
26 161.664 20
27 032.835 1
28 032.826 1
29 032.827 A/R
032.828 A/R
032.829 A/R
30 032.831 A/R
032.832 A/R
032.833 A/R
©
V a n
Oil seal, front
Oil seal, side-outer
Oil seal, side-inner
Hub bearing
Bearing, diff.box
Bearing, pinion head
Bearing, pinion
RH Wire wheel hub
LH Wire wheel hub
Nut, pinion
Oil seal, front
Gasket, pinion seal
Oil seal, rubber
Oil seal, leather
Gasket, paper
Shim 0.003”
Shim 0.005”
Shim 0.010”
Oil seal, inner
Gearse nipple
Nut, 1” x 14 TPI
Washer
hub bearing
key
Half shaft, improved quality
RH Wire wheel hub, for conversion to wire wheels, also change the drums
LH Wire wheel hub, for conversion to
wire wheels, also change the drums
RH Wire wheel hub
LH Wire wheel hub
Sud for wire wheel hub
Flat nut, ½”UNF
Washer, spring
Nipple, 1/8 BSF
Wheel nut, disc wheels
Bearing, pinion head
Bearing, pinion
Shim, inner 0.003”
Shim, outer 0.003”
Shim, outer 0.005”
shim, outer 0.010”
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° ENV
ENV
ENV
ENV
ENV
ENV
ENV
ENV
ENV
31 032.866 1
032.867 1
032.869 1
032.870 1
32 165.650 10
33 174.125 5
34 032.818 2
35 032.820 A/R
032.821 A/R 36 032.843 2
37 032.845 2
38 032.816 2
39 016.658 1
40 172.929 2
50 042.984 2
042.985 2
045.012 2
51 041.951 1
52 041.793 4
041.807 2
53 032.908 2
54 032.907 2
55 042.987 2
56 042.988 1
042.989 1
57 042.990 2
58 041.802 4
59 041.806 2
60 042.994 1
042.995 1
61 041.796 2
62 042.993 2
045.058 2
042.838 2
63 041.801 4
041.507 4
64 041.760 4
041.992 4
65 042.986 1
66 045.165 1
67 032.858 2
XK120 & 140
XK120 & 140
XK150
XK150
QTY DESCRIPTION
Crown wheel & pinion 3.31:1
screw, 3/8”
Lock plate
Bearing, diff.casing
Shim, 0.005”
Shim, 0.010”
Thrust washer, side gears
Thrust washer, pinion mate gears
Drain plug
Gasket
Clamp brake pipe to axle
Complete spring, incl.fitted bushes
Complete spring, incl.fitted bushes
Uprated spring
Mounting kit for 2 springs
Bush for shackle & spring at shackle end
Bush at front of spring
Bump stop, upper
Rubber buffer in rebound strap
Rebound strap
RH Rebuild shock absorber
LH Rebuild shock absorber
Link assembly
Replacement bush, use a guiding
tool and an hydraulic press.
Taper wedge
RH Under plate
LH Under plate
Lock plate
Rear shock absorber, standard
Adjustable shock absorber, SPAX
Adjustable shock absorber, KONI Lower bush, standard
Polyurethane lower bush
Upper bush, standard
Polyurethane bush, upper
Set spring gaiters
Conversion bracket kit
telescopic shock absorbers ill.nr.62
Seal carrier
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
3/8” fixing holes
3/8” fixing holes
3/8” fixing holes
3/8” fixing holes
XK120 & 140
XK150
XK150
XK120 Only
XK120
XK120
XK120
XK120
XK120
XK140 & 150
XK140 & 150
XK140 & 150
XK140 & 150
XK140 & 150
Comes with shock absorber
Comes with shock absorber
XK120
39
Front suspension
1
2
3
045.080
Bushing kit,
polyurethane
045.059
Suspension bolting kit, 2 sides
40
045.079
Bushing kit, standard quality
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Front suspension
APPLICATION
1 045.059 1 Suspension bolting kit, 2 sides
Contains ill.Nr 4 to 30
2 045.080 1 Bushing kit, polyurethane
3 045.079 1 Bushing kit, standard quality
4 041.121 1 Split pin kit
5 161.682 4 Slotted nut, lower wishbone shaft
6 041.713 4 Washer, lower wishbone shaft
7 162.042 4 Bolt, lower wishbone to chassis
041.712 4 Bolt, shouldered head
161.025 8 Self locking nut
8 161.297 2 Slotted nut, shock absorber pin
9 041.736 2 Washer
10 162.124 2 Bolt, anchor bracket
11 161.026 2 Nut
13 161.297 4 Slotted nut, upper wishbone shaft
14 041.734 4 Washer, upper wishbone shaft
15 165.654 2/4 Bolt, top holes Early XK120 use 4, late use 2
162.638 2 Bolt, top holes
Later cars
162.674 4 Bolt for lower holes
16 161.017 4 Self locking nut, upper bolts
161.025 4 Self locking nut, lower bolts
17 165.854 4 Bolt, upper ball joint
18 174.129 4 Locking plates
19 161.026 4 Nut
20 162.691 8 Screw, cap housing
21 174.130 4 Lock plate
22 162.056 4 Screw, clamp
23 161.026 4 Nut
25 163.056 4 Washer, link, lower
XK120 & 140
041.714 4 Washer, link, lower
XK150
26 163.031 2 Washer
27 163.056 2 Washer, top
28 161.043 2 Slotted nut
29 162.276 2 Bolt, shock absorber
30 161.338 2 Self locking nut
31 041.732 8 Bush, upper wishbone
Standard quality
041.920 4 Bush assembly, polyurethane
Improved quality
32 041.733 8 Bush, lower wishbone
Standard quality
Improved quality
33 041.757 4 Bush, lower, link anti roll bar
Standerd quality
Improved quality
34 041.760 4 Bush, upper
Standard quality
041.922 4 Bush, upper, polyurethane
Improved quality
35 042.895 2 Link
36 042.893 1 Anti-roll bar, standard 5/8”
XK120 very early ’49-‘52
042.893 1 Anti-roll bar, standard 11/16”
All others
045.112 1 Uprated, fast road & rally anti-roll bar
045.042 1 Anti-roll bar, competition 7/8”
Comes with ‘D’ bushes
37 041.754 2 ‘D’ Bush, 5/8”
Standard quality
041.755 2 ‘D’ Bush, 11/16”
Standard quality
041.914 2 ‘D’ Bush, 11/16” polyurethane
Improved quality
38 041.756 2 Clamp
39 042.896 1 RH Anchor bracket
042.897 1 LH Anchor bracket
40 042.878 2 Lower shaft
41 042.879 2 Front lower lever
42 042.907 1 RH Rear lower lever
042.908 1 LH Rear lower lever
43 041.761 2 Flange, torsion bar
44 134.729 1 RH Torsion bar
XK120 steel wheel cars
134.730 1 LH Torsion bar
XK120 steel wheel cars
134.731 1 RH Torsion bar
All others
134.732 1 LH Torsion bar
All others
234.161 1 Pair uprated tension bars for road/rally
made from 599 Aircraft spec. steel
45 041.762 1 RH Lever
041.763 1 LH Lever
46 041.764 2 Adjusting nut
47 041.765 2 Trunion
48 041.766 2 Adjusting nut
©
V a n
G e s t e l
XK140 FHC
B & C
ILL N° PART N° 49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
162.069
161.026
164.006
162.481
164.002
161.026
042.873
042.902
041.885
042.876
042.877
042.884
041.194
041.737
042.885
041.194
041.222
041.724
165.656
041.767
041.768
041.744
032.860
042.882
042.888
042.889
162.037
162.036
162.276
041.736
161.043
042.890
041.713
161.682
041.752
161.297
041.753
041.751
041.750
041.749
041.748
042.891
167.334
061.382
042.188
042.189
042.190
042.191
167.054
161.044
165.442
161.032
042.211
042.212
042.892
042.836
045.056
042.991
042.837
042.839
045.057
041.801
041.507
041.760
041.922
041.771
162.029
164.012
161.019
041.735
QTY DESCRIPTION
2
2
2
2
2
2
2
2
A/R
2
2
2
2
A/R
2
2
4
2
8
A/R
A/R
2
2
2
1
1
4
4
4
8
8
2
2
2
2
2
2
2
2
2
2
2
10
2
1
1
1
1
10
10
10
10
1
1
2
2
2
2
2
2
2
4
2
4
4
2
4
4
4
2
Bolt
Nut
Washer, spring
Bolt, lever to chassis
Washer, spring
Nut
Upper shaft
XK120
Upper shaft
XK140 & 150
Camber adjusting plate
Front, upper arm
Rear, upper arm
Upper ball joint assembly
Rubber dust cap, only
Castor adjusting plate
Lower ball pin kit
Rubber dust cap
Clip for dist caps
Dust cap retainer plate
Screw
Shim 0.005” thick
Shim 0.010” thick
Cap
Grease nipple
Stub axle
RH Steering arm
LH Steering arm
Bolt steering arm, drum brake cars
Holes to be drilled !
Bolt, steering arm, disc brake cars
Lower bolts, caliper plate to axle
Washer
Slotted nut
Stub axle shaft
Washer, rear end
Slotted nut, rear end
‘D’ Washer, front
Slotted nut, front
Grease cap
Outer bearing
Inner bearing
Cover plate for gearse retainer
Grease retainer, felt seal
Front hub
Steel wheels
Stud
Steel wheels
Grease nipple
RH Wire wheel hub, drum brake cars
XK120 & 140
LH Wire wheel hub, drum brake cars
XK120 & 140
RH Wire wheel hub, disc brake cars
XK150 & conversions
LH Wire wheel hub, disc brake cars
XK150 & conversions
Stud, drum brake cars only
XK120 & 140
Nut, ½” UNF
XK120 & 140
Bolt, disc brake to hub
XK150 & conversions
Self locking nut, all metal
XK150 & conversions
RH Spinner, ‘Jaguar’
LH Spinner, ‘Jaguar’
Front shock absorber, standard
XK120 ( not illustrated )
XK120 ( not illustrated )
Front shock absorber, SPAX
Front shock absorber, standard
XK140 & 150
XK140
XK150
Front shock absorber, SPAX
XK140 & 150
Lower bush, supplied with shock absorber
Lower bush, assembly polyurethane
Upper pad, rubber
XK120 only !
Upper pad, polyurethane
XK120 only !
Bump stop
Bolt, bump stop
Washer, spring
Nut
Pin lower wishbone
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
APPLICATION
-S- Type 3.8cc
41
XK120 Steering
37
39
1 043.545 1 LHD Rebuild steering box
043.546 1 RHD Rebuild steering box
2 043.564 1 Oil seal, rocker shaft
3 043.556 28 Ball, between race and washer
4 043.553 14 Ball, between worm and main nut
5 043.571 1 Gasket set
6 165.654 2 Bolt for steering box & idler
7 161.017 2 Self locking nut
8 043.763 1 Idler repair kit: shaft & bush
9 043.589 1 Seal in bottom of idler housing
10 043.764 2 Pin and bush assembly, standard 043.839 2 Pin and bush assembly, uprated
original O.D. 23.2mm
043.840 2 Pin and bush assembly, uprated
oversize, O.D. 25.4mm
11 161.017 2 Self locking nut ½”
12 043.593 1 Track rod connecting tube
13 043.596 2 Clamp
14 043.594 1 LH Inner track rod end
15 043.595 1 RH Inner track rod end
16 043.602 1 PAIR Outer tierods, fixed length
17 041.194 6 Dust cap, rubber
18 041.222 6 Clip for dust cap
19 043.559 2 Gasket at bottom
20 043.760 1 Clamp, steering column
42
APPLICATION
ILL N° PART N° Exchange only
Exchange only
21 043.586 1
22 043.578 1
23 043.577 1
24 042.919 1
045.106 1
045.031 1
25 043.576 1
26 161.708 1
27 043.612 1
28 043.229 1
29 043.611 1
30 165.665 2
31 086.664 1
088.103 1
32 086.665 1
33 086.666 1
34 086.667 1
35 080.330 1
36 134.987 1
37 330.020 2
38 043.598 2
39 043.946 1
With rubber bonding
With ball joint in nylon
With ball joint in nylon
( MKII version )
Adjustable
A direct replacement for
the early 5 piece tierods
QTY DESCRIPTION
APPLICATION
Dust excluder
OTS
Retaining plate
OTS
Telescopic dust excluder
DHC & FHC
Original size steering wheel, black
Original size steering wheel, continental
white, ivory
16” Steering wheel, gives more comfort
for getting in and out the car.
Circlip, holds the steering wheel
Adjusting nut, steering wheel
Top washer, cup
Spring, column dust cover
Bottom washer, cup
Screw, grub, in steering wheel
Complete steering column control
with indicator switch & DOME push
Complete steering column control
with indicator switch & FLAT push
Horn buttom only
Chrome rim
Lever, indicator
Wiring, steering column
Stator tube, horn wire
Steering box lube, 500ml
Seal, levern track rod end
Bearing ball and race kit
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
XK140-150 Steering
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
©
QTY DESCRIPTION
043.636 1 LHD Rebuild steering rack
043.637 1 RHD Rebuild steering rack
043.634 2 Gaiter
172.605 2 Clip, large
172.039 2 Clip, small
043.644 2 Track rod end , incl.dust cap & nut
041.194 2 Dust cap only
043.596 2 Clamp
162.030 2 Bolt
164.002 2 Washer, spring
161.002 2 Nut
043.643 2 Inner ball joint assembly
043.635 2 Lock washer
043.618 1 Rack & pinion
043.641 2 Bush, in ends of pinion housing
043.622 2 Bearing, pinion housing
043.626 1 Oil seal
043.642 1 Bearing in end of rack tube
043.648 2 Lock washer, ball housing
043.645 A/R Shim 0.005”
043.629 1 XK140 Plugner, pinion housing
043.691 1 XK150 Plugner, pinion housing
043.697 1 Rack tube support
043.649 2 Rack mounting
043.026 2 XK140 Universal joint, lower column 043.026 1 XK150 Universal joint, lower column
043.656 2 XK140 Taper pin and nut
043.656 1 XK150 Taper pin and nut
043.131 1 XK150 Rubber coupling
V a n
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° With new rack & pinion
With new rack & pinion
25 162.662
164.108
26 162.481
27 043.687
28 043.729
043.730
29 043.761
30 043.762
31 042.920
32 161.666
33 174.131
34 163.278
35 165.665
36 043.688
37 043.229
38 043.611
39 043.671
40043.716
41 086.669
42 043.690
43 086.930
086.892
44 086.674
45 086.888
46 086.889
47 045.081
48 043.652
49 165.668
QTY DESCRIPTION
4
4
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
Cap screws, rubber coupling
Palnuts for 165.670
Bolt, use 5:16” nut
XK140 Draught excluder, firewall
XK150 LHD Column bracket
XK150 RHD Column bracket
XK140 Pair ball races, upper & lower
XK150 Pair improved plastic bushes
Steering wheel
Nut, steering wheel
Lock plate
Washer, plain
Brub screw
Small cup, upper
Spring, dust cover
Large cup, lower
XK140 Adjusting nut
XK150 Adjusting nut
XK150 Indicator switch
Pair split cones, steering whl.seating
XK140 Horn contact set
XK150 Horn contact set
Horn push assembly
Button, horn push
Black bezel
Outer tie & nut
Bridge piece, for your safety
Bolts, at rear
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
APPLICATION
-S- Type 3.8cc
43
Master brake cylinders, brake pipes & servo
44
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Master brake cylinders, brake pipes & servo
166.093
BSF Fastener kit, 2BA-1/4”-5/16”-3/8”
250 pieces
1 053.238 1
2 052.587 1
3 052.674 1
4 052.682 1
052.707 1
161.009 2
5 052.793 1
052.695 1
6 172.918 1
7 171.093 1
171.092 1
8 052.683 1
9 162.477 2
10 164.025 2
11 161.026 2
12 052.706 1
13 052.681 1
14 052.680 1
15 168.252 1
16 168.019 1
17 168.010 1
18 052.705 1
19 168.014 1
20 052.679 1
21 083.293 1
22 053.271 1
23 052.696 1
24 052.577 2
25 052.678 1
26 052.617 1
27 052.698 1
28 052.699 1
161.009 2
29 052.695 1
30 172.918 1
31 052.701 1
32 171.092 1
33 053.239 1
34 052.269 1
052.502 1
35 027.367 1
36 172.918 1
37 171.093 1
38 052.117 1
39 053.039 1
053.018 1
40 027.332 1
027.348 1
41 027.333 1
027350 1
©
V a n
Brake master cylinder
Repair kit
Push rod, goes into the cylinder
Adjustable rod
Adjusting rod, less nuts
Adjusting nuts
Fork end
Fork end
Clevis pin
Pedal return spring, 97mm
Pedal return spring
LHD Heat shield
Bolt
Washer, shakeproof
Nut
Connector when no banjo is fitted
Banjo bolt
Banjo to take male feed pipe
Washer, upper
Washer, lower
Washer, inner
Double banjo
Washer, outer
Banjo bolt to take brake switch
Brake light switch
Dual master cylinder, XK120
Modern replacement tandem cylinder
Repair kit for original cylinder
Tilt valve
Banjo
Banjo bolt
Push rod, in cylinder
Adjustable rod
Adjusting nut
Fork
Clevis pin
LHD Heat shield
Spring, pedal return
Master cylinder,Girling 7/8”
Repair kit for Dunlop, 7/8”
Repair kit for Girling, 7/8”
Fork
Clevis pin
Pedal return spring 97mm
Rubber grease
DOT 4 brake fluid, 1 liter
Sylicone brake fluid, 1 liter
Pedal rubber, 14cm long
Pedal rubber, 10cm long
Pedal draught excluder
Pedal draught excluder
G e s t e l
XK140 FHC
B & C
APPLICATION
XK120 & 140 single
XK120
XK140
XK140
XK120
XK140 + early 120
XK120
XK140
Use female pipe connection
When fitted
XK150
As fitted original
Replacement cylinder
XK120 & 140, exept 140 FHC
XK140 FHC & XK150
XK120
XK140
ILL N° PART N° QTY 42 027.352 1
43 172.917 1
44 027.360 1
45 027.361 1
50 053.513 1
51 053.514 1
52 052.163 1
53 052.331 1
54 052.704 1
55 053.513 1
56 053.286 1
57 052.774 1
58 054.644 1
59 054.805 1
60 054.614 1
054.644 1
61 054.644 2
62 054.805 2
63 054.644 2
64 054.697 1
65 054.805 1
66 054.698 1
67 050.302 1
053.082 1
68 053.284 1
69 052.771 1
70 054.454 A/R
71 054.615 1
054.616 1
054.617 1
054.619 1
054.616 1
054.621 1
054.622 1
72 172.126 7
73 172.976 8
74 052.694 1
75 052.693 2
052.776 1
052.780 1
76 054.519 3
054.742 3
77 054.520 2
054.521 1
054.790 1
78 168.010 3
168.254 1
79 164.034 3
80 161.013 3
81 164.032 5
82 161.009 5
DESCRIPTION
APPLICATION
Felt seal on stem
Circlip
Pedal bearing, roller
Sleeve & spacer
Supply tank, single outlet
Twin supply tank
Cap
Seal
Bracket
Supply tank
Polythene supply tank & cap
Filler cap & lever indicator
Upper pipe
Hose, intermediate
Lower pipe, male nipple
Lower pipe, female nipple
Upper pipe
Hose, intermediate
Lower pipe to cylinder
Upper pipe, for metal tank
Hose, cut to length
Lower pipe to master cylinder
Rebuild servo, Girling
Replacement servo, Lockheed
Reserve tank
Check valve
1 Meter vacuum hose
LHD Brake pipe set
RHD Brake pipe set
LHD or RHD Brake pipe set
LHD Brake pipe set
RHD Brake pipe set
LHD Brake pipe set
RHD Brake pipe set
In line connector
3 Way
5 Way, at front
3 Way, on rear axle
Standard brake hose
Stainless steel braided brake hose
Front brake hose, standard
Rear brake hose, standard
Set stainless steel brake hoses
Copper sealing washer
Copper sealing washer, rear hose
Large star washer
Large flat locking nut
Star washer
Locking nut
XK140 & 150
XK140 & 150
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
XK120 & 140 , single line
XK120, dual line
XK150
XK150 March 1960-on
LHD cars
RHD cars
XK120 dual line
XK150
XK150 exchange only
Not often fitted
XK120 single line
XK120 single line
XK120 dual line
XK140
XK140
XK150
XK150
XK120 & 140
XK150
XK120 & 140
XK150
XK150
XK120 & 140
XK120 & 140
XK150
XK150
XK150
XK120 & 140
XK150
XK120 & 140
XK120 & 150
XK150
XK150
45
Brake parts
46
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Brake parts
050.508 XK120 LHD
050.509 XK140-150 LHD
Complete conversion kit
To hydraulic clutch & servo brake
Will fit to all XK’s, welding is required
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
©
QTY DESCRIPTION
053.237 4
052.629 4
161.074 12
052.590 4
052.589 4
053.245 2
052.591 4
052.291 2
052.598 2
054.572 2
052.615 1
052.616 1
052.617 4
168.014 4
168.010 4
052.600 2
027.009 2
054.577 2
053.246 2
052.644 2
052.595 2
052.590 2
052.596 2
052.597 2
052.600 2
052.617 2
168.014 2
168.010 2
027.009 2
050.226 4
050.243 2
050.230 2
165.644 8
053.252 4
052.629 4
053.253 1
052.612 4
052.628 4
052.626 4
052.627 1
052.620 8
052.622 4
052.621 4
052.624 4
052.623 4
052.625 4
052.619 4
053.256 2
V a n
Front wheel cylinder
Seal kit, front wheel cylinder
Nut, 5/16” BSF
Mask
Cam, adjuster
Axle set, brake shoe lining & rivets
Spring, front
Spring, rear – long
Spring, rear – short
Bridge pipe between wheel cylinders
RH Banjo, front upper
LH Banjo, front upper
Banjo bolt
Washer copper, outer
Washer copper, inner
Banjo, lower
Bleed screw, front
Gauze screen, air scoop
Rear wheel cylinder
Seal kit, rear wheel cylinder
Rubber boot only
Mask, rear
Adjuster cam
Abutment
Banjo, rear
Banjo bolt, rear
Washer copper, outer
Washer copper, inner
Bleed screw
Brake drum, front or rear
Front brake drum
Rear brake drum, Salisbury axle
Screw, lockating drum to hub
Front wheel cylinder assembly
Seal kit, one whl.cyl.
Brake shoe lining kit, front
Spring, front
Peg ass.spring to back plate
Anchor pin, adjusting bar
Cipclip kit, 4 clips & washers
Friction pad
Outer plate
Inner plate
Tension spring
Bolt, with nut & washer
Ratchet spring
Bar
Rear wheel cylinder assembl
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° XK120 1948-‘51
43 052.619 4
44 053.256 2
45 052.644 2
46 052.595 2
47 053.253 1
48 052.618 4
49 052.613 2
50 052.614 2
51 053.254 1
053.255 1
52 052.631 2
60 053.093 4
61 053.269 4
053.364 4
62 053.095 2
053.495 2
63 053.260 2
64 053.288 2
65 052.270 2
052.710 2
052.836 2
66 052.576 2
67 041.722 4
68 054.605 4
69 052.669 8
70 052.670 4
71 165.515 4
72 164.007 4
73 161.019 4
74 050.244 4
050.361 4
75 042.918 2
76 032.886 1
77 053.276 1
053.277 1
78 053.096 1
79 165.730 4
80 165.440 4
81 052.721 2
82 052.720 2
83 165.450 2
84 052.666 2
85 052.648 A/R
86 165.446 4
87 165.448 4
16 hole type
Not wire wheel cars
Wire wheel cars
Wire wheel cars
XK120 & 140 1951-‘57
12 hole type
QTY DESCRIPTION
Bar
Rear wheel cylinder assembly
Seal kit, one wheel cyl.
Boot only
Brake shoe lining kit
Spring, brake shoe to backplate
Spring on wheel cylinder side
Spring on adjuster side
RH Adjuster
LH Adjuster
Adjuster wheel & screw
Front cylinder & piston 2.1/8”
Rear cylinder & piston 1.5/8”
as fitted from August 1957-on
Rear cylinder & piston 1.3/4”
fitted to pre-August’57 cars
Front or Rear square pad set
Square pad set, Green stuff
Round pad set, for pre-11-’58
Conversion pad set, if new
cylinders are fitted to pre-11-’58 cars
Seal kit for two cylinders
Screw & washer kit, Bleed screw & ball
Bridge pipe
Support plate
Pad retainers
Bolt
Washer, shakeproof
Nut
Brake disc, standard
brake disc, 12.7mm
Front mounting plate
Pair rear mounting plates
RH Handbrake calliper ass.
LH Handbrake calliper ass.
Bandbrake pad set & rivets
Bolt, thread at end
Bolt, thread near head
Tab plate
Retractor plate
Bolt, handbrake lever to carrier
Lever, handbrake
Shim .005 thick
Front calliper mounting bolt, drilled head
Rear calliper mounting bolt, drilled head
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
12 hole type
Square brake pad type
Also suitable for early cars
4 pieces in one set
4 pieces in one set
When early cyl.are fitted
2.1/8” front
1.5/8” late rear
1.3/4” early rear
16 bolts + 16 washers
Front & rear
Front & rear
Front & rear
Front & rear
Front & rear
Front & rear
Front & rear
For modified brakes only
Up to 11-‘58
From 11-’58 on
11-’58 on
47
Handbrake parts
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
173.029
054.624
054.628
054.627
054.626
054.630
054.654
054.655
054.683
054.684
054.763
054.720
054.660
054.689
172.971
172.972
054.569
054.570
054.690
171.103
054.640
054.638
054.571
172.929
172.009
48
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
2
2
Clamp for gaiter
Handbrake lever
Knob
Spring on rod
Rod & pawl
Ratchet
LHD Handbrake lever
RHD Handbrake lever
LHD Handbrake lever
RHD Handbrake lever
Spring rod end
Ratchet plate
Link piece
Link piece
Clevis pin, upper
Clevis pin, lower
Handbrake cable one piece
Spring, end of one piece cable
Retainer plate, spring
Compensator
Handbrake cable
Clip, cable to axle
Clevis pin
APPLICATION
All
XK120
XK120
XK120
XK120
XK120
XK140
XK140
XK150
XK150
XK140 & 150
XK140 & 150
XK140 & early 150
XK150 ( late )
XK140 & 150
XK140 & 150
XK120 ENV axle
XK120 & 140
XK150 early
XK120 & 140
XK120 & 140
XK120 – 140 & early 150
XK150 late
XK150 late
All
20 054.639 1
054.663 1
054.692 1
054.695 1
21 054.693 1
22 027.341 2
23 054.637 2
24 172.972 1
172.971 1
25 054.635 1
26 054.636 1
27 027.341 1
28 054.637 1
29 054.631 1
054.632 1
054.738 1
30 172.968 2
31 054.633 1
054.688 1
32 054.634 1
33 054.659 1
054.659 1
34 054.661 1
Axle
APPLICATION
Abutment bracket for single cable
XK120
XK140
XK150
Abutment bracket for twin cable
XK150
Compensator, twin cable
XK150 late
Trunion, twin cable to compensator
XK150 late
Adjusting nuts, twin cable
XK150 late
Clevis pin, compensator
Single cable type
Clevis pin, compensator, illustrated
XK150
Compensator rod
All
Spring
All
Trunion adjusting rod
All
Adjusting nut
All
LHD Shaft
XK120
RHD Shaft
XK120
Cross shaft
XK140 & 150
Key for levers
All
Lever, centre
XK140
Lever, centre
XK150
Spring
All
Operating lever
XK120
Lever, for handbrake link
XK140 & 150
Pair clamps, handbrake cable to rear
©
V a n
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Wheels & tools
1 046.128 5
2 161.664 20
3 152.044 15
4 141.927 4
5 141.928 4
6 046.037 5
046.036 5
046.151 5
046.150 5
7 047.100 5
8 047.099 5
9 161.476 5
10 047.
5
11 042.211 2
042.212 2
12 185.704 1
13 186.034 1
14 042.097 1
15 185.050 1
16 187.012 1
17 169.057 A/R
169.058 A/R
169.059 A/R
169.060 A/R
18 169.001 A/R
169.002 A/R
19 200.674 1
20 132.526 1
21 232.059 1
22 200.690 1
23 137.712 1
©
V a n
Disc wheel, 16 x 5.1/2”
Wheel nut
Stud for hub cap
Hub cap
‘Jaguar’ badge
Wire wheel, chrome plated 5 x 16”
60 spoke, standard
Wire wheel, painted silver, 5 x 16”
60 spoke, standard
Wire wheel, chrome plated, 6 x 16”
72 spoke, competition
Wire wheel, painted silver, 6 x 16”
72 spoke, competition
Protection band, wire wheel, 16”
Inner tube
Stainless steel valve cap
Please call for more information
RH Spinner ‘Jaguar’
LH Spinner ‘Jaguar’
Wooden tool, chrome protector
Always jack-up the car first.
High temp. copper grease
Hammer, leather/copper
Cleaning brush
Silicone spray
Use on clean & dry wheels
Short spoke & nipple for 046.036
Long spoke & nipple for 046.036
Short spoke & nipple for 046.037
Long spoke & nipple for 046.037
Nipple, bare metal
Nipple, chrome plated
Spoke spanner
Tire pump
Jack
Ratchet handle
Rubber boot, jack end
G e s t e l
XK140 FHC
B & C
24 159.485 1 Leather strap for jack
25 159.234 1 Tool roll, XK120
159.597 1 Tool roll, vinyl ( not illustrated )
XK140 & 150
Tools listed below are mostly reproductions of original’s
King Dick tools are not original but period style and very like.
26 200.834 1 Screwdriver ‘Jaguar’
27 200.858 1 Spanner, 1/8”x 3/16” BSF, Jaguar
200.633 1 Spanner, 3/16”x 1/4” BSF, King Dick
200.859 1 Spanner, 5/16”x 3/8” BSF, Jaguar
200.860 1 Spanner, 7/16”x 1/2” SAE, Jaguar
200.649 1 Spanner, 7/16”x 1/2” SAE, King Dick
200.861 1 Spanner, 9/16”x5/8” SAE, Jaguar
200.650 1 Spanner, 9/16”x5/8” SAE, King Dick
200.862 1 Spanner, ¾”x7/8” SAE, Jaguar
200.651 1 Spanner, 11/16”x3/4” SAE, King Dick
28 200.851 1 Box spanner 3/16”x 1/4” BSF
200.627 1 Box spanner 3/16”x ¼” BSF, King Dick
200.852 1 Box spanner 5/16”x 3/8” BSF
200.628 1 Box spanner 5/16”x 3/8” BSF, King Dick
200.853 1 Box spanner 7/16”x ½” BSF
200.854 1 Box spanner for spark plug
200.645 1 Box spanner for spark plug, King Dick
200.855 1 Box spanner for torsion bar ¾”SAE
200.856 1 Box spanner, 7/16”x ½”SAE
Text of ill.n° 28 continues in next column
200.642 1 Box spanner, 7/16” x ½” SAE, King Dick
200.857 1 Box spanner, 9/16”x 5/8” SAE
200.643 1 Box spanner, 9/16”x 5/8” SAE, King Dick
200.848 1 Box spanner, 3/4”x 7/8” SAE
200.644 1 Box spanner, ¾”x 11/16” SAE, King Dick
29 200.624 1 Short tommy bar
30 200.835 1 Long tommy bar
31 200.625 2 Tyre levers
32 200.844 1 Adjustable spanner, Jaguar
200.608 1 Adjustable spanner, King Dick
33 200.849 1 Pliers, Jaguar
200.610 1 Pliers, King Dick
34 200.838 1 Pouch, cam setting
35 200.842 1 Feeler gauge set, Jaguar
200.839 1 Cam setting gauge, Jaguar
200.451 1 10 Blade feeler gauge, Universal
36 200.841 1 Screwdriver for distributor &
spark plug gap gauge
37 200.630 1 Tire valve extractor
38 200.702 1 Gauge, tire pressure, Not original
39 152.105 1 ‘T’ Handle for budget locks
40 200.671 1 Grease gun, Tecalemit 3020, XK140 or 150
200.672 1 Grease gun, Tecalemit 3000, XK140 or 150
41 200.675 1 Grease gun, Tecalemit, XK120
42 200.676 1 Grease gun, Tecalemit GC3000/3020
43 172.987 2 Clip for jack ratchet handle
44 172.985 1 Clip for jack, small
172.986 1 Clip for jack, large
172.989 2 Clip for tire pump
172.991 2 Clip for 3000 or 3020 grease gun
For more - use our Toolcatalogue
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
49
Ignition system
Lumenition Optronic Ignition is an electric ignition conversion kit
principally for cars originally fitted with mechanical distributors
using contact points. The advantage of the Lumenition system
is that it contains no wearing parts, requires no adjustment or
maintenance during service and once ignition timing is set it
will remain permanently tuned. The engine will start better, last
longer and run more economically through improved efficiency.
There are only three components, very compact and simple to fit.
Power module
086.082
086.462
Fitting kit for DMBZ distributors
For XK120-140
We stock “Ignitor”
185.743
Aluminium spacer block
Spark plug wire holder, made from solid aluminium
1 081.693 1
2 081.706 1
1 081.694 1
2 081.706 1
1 081.695 1
2 081.707 1
1 081.696 1
2 081.708 1
1 081.697 1
2 081.709 1
1 081.698 1
2 081.710 1
1 081.699 1
2 081.711 1
1 081.700 1
2 081.709 1
1 081.701 1
2 081.709 1
1 081.702 1
2 1081.703
1
2 081.712 1
1 081.704 1
2 081.713 1
1 081.705 1
2 081.548 1
3 081.714 1
4 081.715 1
081.716 1
50
APPLICATION
Distributor DVXH6A 16-18° 40198
1949-’53 compr.7:1
Vacuum unit for above distributor
LU 418958
Distributor DKYH4A 16-18° 40249
1953-’54 compr.7:1
LU 418958
Distributor DVX6A 18-20° 40435A
1955-’57 compr.7:1
LU 421710
Distributr. DMBZ6A 17-19° 40578
1958-’60 compr.7:1
LU424374
1949-’54 compr.8:1
LU 419066
Distributor DVXH6A 14-16° 40436A
1955-’57 compr.8:1
LU 421720
Distributor DMBZ6A 17-19° 40576
1958-’60 compr.8:1
LU 421027
1955-’57 compr.8:1
LU 419066
Distributor DVX6A 13-15° 40293
1955-’57 compr.8:1
LU 419066
1955-’57 compr.9:1
NO Vacuum unit fitted on above
1959-’60 3.4 compr.9:1
LU 54412348
1960 3.8 compr.8:1
LU 54410709
Distributor DMBZ6 11-13° 40665
1960 compr.9:1
LU 421189
Cap, side entery
Not very commen
Cap, top entery 1949-’57
XK120 & 140 (DVX type)
Cap, top entery 1957-’61
XK150 (DMB type)
ILL N° PART N° 5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
081.167
081.072
081.161
081.128
081.509
081.717
081.017
081.052
016.614
086.631
086.132
081.194
139.098
139.100
139.092
081.679
081.964
081.965
081.674
012.058
012.389
080.223
080.224
081.951
081.950
081.949
081.658
081.481
081.148
• 081.988 Positive earth
• 081.989 Negative earth
QTY DESCRIPTION
7
7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
6
6
1
1
3
2
1
6
6
6
APPLICATION
Replacement nut, plastic
Brass washer
Rotor arm
Contact set 1949-’57
Contact set 1957-’61
Condensor, nut terminal
Condensor with wire
Earth lead
Cork sealing ring
Vacuum pipe, nipples at both ends
Vacuum pipe, nipple at one end
Ignition coil, screw-in cable
Bracket, not illustrated
Bracket, not illustrated
H.T. Wire set with straight end caps
H.T. Wire set with 90° end caps
Cable conduit
Spark plug, Champion
Spark plug, NGK
5 Meter ignition lead
5 Meter H.T. Lead, competition
Thin cable separator
Thick cable separator
Clip for cable separator
Champion HTC2 Straight cap
Champion 90° plug
Insulator assembly
©
V a n
XK120 & 140
XK150
XK120 & 140
XK150
XK120 & 140
XK150
XK120 & 140
XK140 with 2” carb.’C’Type
XK150 STD
XK150”S”
Copper core, black insulation
Copper core, yellow & black
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Wiring loom, battery & electrical connectors
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
©
QTY DESCRIPTION
080.326 1 XK120 LHD Wiring loom ’49-‘51
080.327 1 XK120 RHD Wiring loom ’49-‘51
080.328 1 XK120 LHD Wiring loom ’51-’54
080.329 1 XK120 RHD Wiring loom ’51-’54
080.330 1 XK120 Wiring for steering column
080.331 1 XK140 Wiring loom ’54- ‘57
080.332 1 XK140 Wiring for overdrive
080.333 1 XK140 Waring for overdrive
080.334 1 XK140 Automatic gearbox wiring
080.335 1 XK150 Wiring loom ’57-’59
080.337 1 XK150 Wiring loom ’57-’59
080.336 1 XK150 Wiring loom ’59-’61
080.338 1 XK150 Wiring loom ’59-’61
080.380 1 XK120 Battery cable set
080.383 1 XK150 Battery calble set (round heater)
080.384 1 XK150 Battery cable set (square heater)
080.009 1 Earth cable
121.517 1 Firewall grommet kit
082.159 2 Black battery, 6 Volt, dry charged
132.483 2 Batery cover, 139.096 4 Battery hook & nut
232.353 2 Battery bracket, to be went into the box
139.071 2 Battery clamping bar
082.152 1 Black battery, 12 Volt, dry charged
083.178 2 Battery terminal clamp, - pole
083.179 2 Battery terminal clamp, + pole
080.299 A/R 1 Meter black battery cable
080.133 A/R 5 Meter black battery cable
V a n
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° When no flashers are fitted
When no flashers are fitted
With flashers fitted
With flashers fitted
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Two relays type
Single relay type
Additional loom
Small rear lamp version
Automatic cars & small lamp
Large rear lamp version
Automatic cars & large lamp
1949-‘54
1954-’57 OTS & DHC cars
1954-’57 DHC cars only
1957 up to August ‘58
August 1958-on
XK120
XK140
XK150
XK120, 140 FHC & XK150
XK120
XK120
XK120
XK120
XK140 OTS & DHC
080.134
083.653
083.652
083.651
083.174
086.782
083.041
083.042
083.043
086.893
086.887
086.894
086.895
172.250
083.181
083.185
083.996
083.997
083.998
083.182
083.186
083.180
083.567
083.044
083.115
084.132
083.630
084.138
084.123
QTY DESCRIPTION
1
A/R
A/R
A/R
1
1
A/R
A/R
A/R
1
1
1
1
1
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
1 Meter earthing cable
Heatshrink tubing Straight terminal
Flag terminal
Battery switch
Battery switch
Single snap connector
Double snap connector
3 Way snap connector
Bracket for 5 way connector
Bracket for 10 way connector
Earth terminal
Female terminal, 6.3 mm blade
Female terminal 9.5 mm blade
Eylet terminal 3/16” hole
Eylet terminal ¼” hole
Eylet terminal 5/16” hole
Insulation for 083.181 or 083.187
Insulaton for 083.185
Solder type bullet terminal
Crimping type bullet terminal
Sleeve type bullet terminal
Bulb holder with earth wire
Bulb holder without earth wire
Bulb holder with earth connector
Bulb holder without earth connection
Bulb, dashboard lighting etc.
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
9.5mm ID x 32 mm long
F.I.A. approved
51
Electrical components
082.155
Starter motor
082.130
Fuse box & lid
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
082.127
082.155
082.128
082.170
081.075
083.119
122.013
082.079
081.585
081.586
161.503
081.948
081.945
081.991
081.953
011.895
081.676
084.151
086.630
162.379
082.140
084.005
083.162
082.130
084.006
086.713
52
QTY DESCRIPTION
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
9
1
2
1
1
1
1
APPLICATION
Rebuild starter motor 26062
Manual gearbox
New modern starter
XK manual gearbox
Rebuild starter motor 26097
Automatic transmission
New modern starter
XK automatic gearbox Brush set ( pair )
Solonoid
Boot, terminal
Rebuild dynamo C45 22462 or 22429
Brush set, 5/16” thick
Brush set, ¼” thick
Nut
Pulley & fan assembly
XK120
Pulley, 3/8” wide, up to june’59, 10mm XK140 & early 150
Pulley, ½” wide, from june’59-on, 13mm XK150 late
Fan
XK140 & 150
Dynamo mounting bracket
Adjusting bracket
9 Post control & fuse box
XK120
Cover only
Screw, terminal
Control box XK140 & 150
Five piece fuse set, 35amp
Five piece fuse set, 50 amp
Used on late XK150’s
Fuse box & lid (for 4 fuses )
all (XK140-150 no lid required)
Fuse box ( for 2 fuses )
XK140 & 150
Terminal block
XK150
ILL N° PART N° 20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
QTY DESCRIPTION
APPLICATION
139.090 1 Plinth for fuse boxes
139.099 1 Fuse box cover
139.094 1 Mounting plinth for relays
139.093 1 Mounting plinth for relays
167.360 1 Stud for fuse box covers
161.722 1 Knurled nut, fuse box cover
084.047 1 Horn, low note
084.048 1 Horn, high note
086.431 1 Horn, Altette, low note
086.432 1 Horn, Altette, high note
086.434 2 Sundries kit for above horns
086.193 1 Die cast horn, low note
086.194 1 Die cast horn, high note
135.739 2 Bracket for replacement horn
083.120 A/R Relay for horns, overdrive, lamps
084.008 1 Relay, combinated flasher/brake lamps
084.011 1 Flasher box
083.293 1 Brake light switch, screw terminal
083.052 1 Reverse light switch ( if fitted )
084.004 1 Brake light switch, lucar terminal
135.091 1 Bracket, dipswitch
084.010 1 Dipswitch
122.462 1 Rubber cap, dip switch
©
V a n
XK150
XK140 OTS & DHC
XK150
XK140 FHC
XK150 small rear lights
XK150 large rear lights
XK140 & 150
XK140 & 150
XK120
XK120
XK140 & 150, rebuild
XK140 & 150, rebuild
Alternative replacement type
Alternative replacement type
1949 to late 1959
All
All
cheep alternative for 083.293
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Switches & cables
086.953
Lever, early
1 086.683 1
2 083.035 1
3 086.686 1
086.687 1
086.689 1
4 086.704 1
5 086.699 1
6 086.953 1
166.043 1
7 086.703 1
8 086.667 1
9 083.039 1
10 088.030 1
11 086.695 1
12 086.670 1
13 166.064 1
14 086.671 1
15 165.948 1
16 083.034 1
17 086.685 1
18 086.702 1
19 086.679 1
086.691 1
20 086.693 1
086.705 1
21 086.912 1
22 086.679 1
086.680 1
086.681 1
083.034 1
23 086.693 1
086.743 1
086.706 1
24 083.408 1
086.694 1
083.408 1
25 083.599 1
©
V a n
Ignition switch
Barrel & two key’s
Lighting switch
Lighting switch, 3 position
Lighting switch, 4 position
Escutcheon O-S-H
Escutcheon O-S-H-F
lamp
‘T’ Shaped operating handle
Screw for 086.953
Operating handle, lighting switch
Operating handle, direction indicator
Direction indicator switch
Tapered escutcheon
Bezel, supplied in bezel kit, 5.8”
Operating handle
Screw
Operating handle
Screw for above
Interior light switch
Interior light switch
Knob, interior light switch
Panel light switch
Panel light switch, reostat
Knob, panel light switch
Knob, panel light switch
Sigar lighter
Wiper switch
Wiper switch
Wiper switch
Wiper switch
Knob, wiper switch
Knob, wiper switch
Knob, wiper switch
Heater fan switch
Heater fan switch
Heater fan switch
Knob, heater knob
G e s t e l
XK140 FHC
B & C
086.693
Knob
APPLICATION
ILL N° PART N° All
All
XK120 1949-‘52
XK120 & 140 1952-‘57
XK150
Off-side lamp-head lamp
Off-side lamp-head lamp-fog 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
XK120 1949-‘50
All cars 1951-on
XK120 on steering boss
XK140 & early 150 DHC-FHC
XK140 OTS
XK140 OTS
XK140 & early 150 DHC-FHC
XK120
XK140 & 150
XK120
XK120 1949-‘50
1951-’60 ( not illustrated )
XK120 1949-‘50
1951-‘57
Will fit all types
XK120 1949-‘50
XK120 1951-‘55
XK140
XK150
XK120 1949-‘50
XK120 1951-‘55
XK140 & 150
XK120 & 140
XK150 1958
XK150 1959-‘60
All
088.029
086.709
083.587
083.593
086.669
043.724
086.679
086.693
086.929
088.075
086.933
086.668
137.864
165.894
165.981
088.038
088.040
088.041
086.853
086.852
086.854
086.853
086.852
086.852
086.856
086.857
086.858
086.859
086.860
086.861
086.862
086.863
086.860
086.864
086.865
108.188
084.739
084.744
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Fuel / Oil gauge switch
Starter switch, push
Starter switch, push
Knob, starter switch
Indicator switch, fits to column
Pair cowls
Fog lamp switch
knob, fog lamp switch
Overdrive switch
Overdrive switch
“Overdrive in-out” Escutcheon
Switch for bootlight
Stricker plate for boot light switch
Antique bronze dash screw
Black plastic, dash screw
Dash bezel kit, seven pieces
Dash bezel kit, eleven pieces
Dash bezel kit, nine pieces
Speedo cable, 167cm
Speedo cable, 152cm
Speedo cable, 190cm
Speedo cable, 167cm
Speedo cable, 152cm
Speedo cable, 152cm Manual
Speedo cable, 144cm Manual+O/D
Speedo cable, 122cm Automitic
Speedo cable, 137cm Automatic
Tacho cable, 61cm
Tacho cable, 48cm
Tacho cable, 41cm
Tacho cable, 61cm
Tacho cable, 53cm
Tacho cable, 48cm
Tacho cable, 41cm
Tacho cable, 41cm Choke cable
“IGH” ignition warning light
“TRF” indicator warning light
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK120 1949-‘52
XK120 1949-‘50
1951-on
XK150
Late XK150
If fitted
XK140
XK150
XK140
XK150
XK120-140 OTS
XK120-140 DHC-FHC
XK150
XK120 LHD 1949-01/’52
XK120 LHD 02/’52-‘54
XK120 RHD 1949-05/’50
XK120 RHD 06/’50-01/’52
XK120 RHD 02/’52-‘54
XK140 & 150 all
XK140 & 150 all
XK140 all
XK150 all
XK120 all 1949-05/’50
XK120 OTS all 06/’50-on
XK120 DHC & FHC LHD
XK120 DHC & FHC RHD
XK140 OTS all
XK140 DHC all
XK140 FHC all
XK150 all
H8 Carb, 2” carb..
XK120-140
XK140
53
Windscreen, washer & wiper installation
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
086.814
086.815
086.816
086.817
086.910
062.279
086.911
086.849
083.055
063.562
083.056
086.618
083.294
082.134
082.135
082.135
082.136
082.137
082.138
082.139
083.200
083.024
086.715
54
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Complete bottle & bracket
Glass bottle only
Complete bottle and bracket
Glass bottle only
Vacuum take-off, manifold
Vacuum hose
Non return valve, vacuum
Switch, vacuum control
Tubing set for water washers, clear
Black tubing set for water washers ‘T’ Piece
Pair washer jets
Electrical pump, NOT ORIGINAL
Wiper motor CR 105° 75088
Wiper motor CRT 95° 75143
Wiper motor DR1 90° 75233
Wiper rack
Wiper rack
Wiper motor mounting block
APPLICATION
ILL N° PART N° XK120 & 140
XK120 & 140
XK150
XK150
XK120 & 140
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
XK120 1949
XK120 1950-‘52
XK120 1952 FHC
XK120 1952-‘54
XK140
XK150 LHD
XK150 RHD
XK120 & 140
XK150
XK120 & 140
139.095
133.344
122.048
086.883
086.884
122.419
087.081
087.082
087.079
086.921
122.476
142.214
161.751
087.088
087.087
087.079
086.921
122.476
142.214
083.021
087.087
087.088
087.080
QTY DESCRIPTION
1
3
3
2
2
2
1
1
2
2
2
2
2
1
1
2
2
2
2
2
2
2
2
APPLICATION
Bracket, wiper motor mounting
Mounting stud & rubber assembly
Mounting rubber, only
Wheelbox
Wheelbox
Grommet, wheelbox spindle
RH Wiper arm
LH Wiper arm
Wiper blade
Wheelbox assembly
Seal, bezel to body
Chrome bezel
Chrome nut
RH Wiper arm
LH Wiper arm
Wiper blade
Wheelbox assembly
Seal, bezel to body
Chrome bezel
Chrome nut
Wiper arm, LHD cars
Wiper arm, RHD cars
Wiper blade
©
V a n
XK120
XK150
XK150
XK120 OTS
XK120 DHC 1 FHC
XK120
XK120
XK120
XK120
XK140
XK140
XK140
XK140
XK140
XK140
XK140
XK150
XK150
XK150
XK150
XK150
XK150
XK150
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Spot & fog lamps
XK120
XK140-150
084.191
5” Fog lamp
084.731
Spot lamp 7”
084.193
5”Spot lamp
185.337
5” protector
185.684
Lamp protector 7”
142.131
5” Stoneguards
142.095
084.194
XK120 “Flame thrower”
Spare fog glass
pair brackets
084.880
Fog lamp 7”
084.196
Spare spot glass
141.409
162.381
142.220
Stoneguard 7”
©
V a n
G e s t e l
XK140 FHC
139.104 XK140-150
5” fog or spot lamp kit
B & C
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
161.121
55
Front lamps
1 084.964 1
2 084.788 2
3 084.789 2
4 084.790 2
5 084.796 2
284.088 2
084.965 2
6 084.791 2
7 084.794 2
8 084.793 2
9 165.494 2
10 084.792 2
11 141.931 2
12 084.855 2
13 084.204 2
14 084.438 2
084.772 2
15 084.859 1
16 084.805 2
17 084.806 2
18 084.157 2
19 084.808 2
20 084.811 2
21 084.857 2
22 084.856 2
23 084.807 2
24 084.809 2
25 084.810 2
56
Headlamp fixing kit
Rubber, lamp to body
Fixing ring to body
Wire rim, retaining light to inner rim
PF770 Tripot light unit
PF770 Tripot light unit, 7.3/4” repro
chrome plated
7” repro PF700 to be used with 084.859 with H4 lamp
Inner rim, retaining rim
Headlamp rim, excluded embellishers
Bottom embellisher, rim retainer
Securing screw
Upper embellisher
Headlight spears, fitted to the body
Backshell for bulb holder
Wiring adaptor
Headlamp bulb, vertical dip
Pair halogen headlamp bulbs
Pair conversion rims, PF770->7”
Seal, lamp to body
Headlamp bowl
Headlamp adjusting kit
Fixing rim, zinc plated
‘J’ Lamp, original
Bajonet adaptor for original J lamp
Clip for bulb, for original J lamp
Retaining plate for original J lamp
Retaining rim, chrome
Dust seal
APPLICATION
XK120
XK120
XK120
XK120
XK120
26
27
28
29
30
31
32
33
34
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
7.3/4” OE
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
084.813
084.793
165.494
084.814
141.931
084.438
084.772
084.812
084.052
084.774
084.800
084.801
084.758
084.113
122.512
165.473
084.760
084.761
084.759
084.938
084.074
084.063
122.460
084.816
084.751
084.872
084.062
084.817
084.818
QTY DESCRIPTION
2
2
2
2
2
2
1
2
2
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
APPLICATION
Headlamp rim, excluded embellishers
Bottom embellisher
Securing screw
Upper embellisher
Headlight spears, fitted on body
Headlamp bulb, vertical dip
Pair halogen lamps
Repro of ‘J’ light unit
Wiring and socket for repro lamp
Pair halogen bulbs for repro lamp
Bolt-on side lamp housing, chrome
Rubber pad
Sidelamp interior
Bulb, 4 W
Sealing ring, rubber
4Ba Fixing screw
Red warning marker
Spring clip
Side lamp, single filament
Side lamp, double filament
Bulb, 5W single filament
Bulb, 5/21W dual filament
Sealing ring
Amber flasher lamp
Clear flasher lamp
Rubber boot
Bulb, 21W
Amber lens & rim
Clear lens and rim
©
V a n
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK120 1949-09’52
XK120 1949-09’52
XK120 1949-09’52
XK120 1949-09’52
XK120 1949-09’52
All
Sept.1952-on
Sept.1952-on
XK140-150
XK120 10-’52 to ‘54
XK140-150
XK120 10-’52 to ‘54
Sept 1952-on
XK140-150
XK140-150 ( Italy )
XK140-150
XK140-150
XK140-150
XK140-150 ( Italy )
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Rear lamps
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
©
139.077
139.078
084.166
084.167
084.168
084.063
084.169
084.080
084.878
121.744
084.868
084.869
084.032
084.031
162.378
084.063
121.745
084.875
084.876
084.298
084.316
084.062
084.063
084.843
084.858
084.839
084.840
V a n
QTY DESCRIPTION
1
1
2
2
2
2
2
2
1
2
1
1
2
2
4
2
1
1
1
2
2
2
2
2
2
2
2
RH Plinth, tail & stop lamp
LH Plinth tail & stop lamp
Tail & stop lamp assembly
Boot only, rubber
Base and socket, double
Bulb 5/21W
Red lens, glass
Securing rim
Pair seals, under plinth
Seal, plinth to body
RH Plinth and lamp base
LH Plinth and lamp base
Seal, lens to plinth
Lens and reflector
Screw for lens, stainless steel
Bulb 5/21W
Pair seal, plinth to body
RH Plinth
LH Plinth
Contact and spring, single
Contact and spring, double
Bulb, flasher, 21W
Bulb, stop and tail, 21/5 W
Rubber seal, lens to tlinth
Plate for lenses
Amber lens, flasher
Red lens, flasher USA only
G e s t e l
XK140 FHC
B & C
APPLICATION
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK140 & 150 up to 10-‘59
XK140 & 150 up to 10-‘59
XK140 & 150 up to 10-‘59
XK140 & 150 up to 10-‘59
XK140 & 150 up to 10-‘59
XK140 & 150 up to 10-‘59
XK140 & 150 up to 10-‘59
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
XK150 late
24 084.874 2
25 084.842 2
26 084.841 2
27 165.468 2
28 084.873 2
29 084.344 2
30 084.644 1
31 084..861 1
32 122.513 1
33 084.069 2
34 084.062 1
35 084.865 1
36 084.863 1
37 084.864 1
38 084.755 1
39 121.743 1
40 084.333 2
41 084.298 1
42 084.879 1
084.849 1
44 084.854 1
45 084.853 1
46 084.848 1
Divider shield, between lenses
XK150 late
Chrome clip between lenses
XK150 late
Lens, stop & tail , red
XK150 late
Screw, chrome plated
XK150 late
Reflector
XK150 late
Bracket for reflector
XK150 late
Number plate & reverse lamp
XK120 & 140
Chrome cover & lens
XK120 & 140
Grommet, cable pass
XK120 & 140
Bulb, number plate lighting
Bulb, reverse light
Chrome housing, less lens
XK150
Reverse light lens
XK150
Seal for lens
XK150
Shroud and bulb holder assembly
XK150
Seal, lamp to boot lid
XK150
Contact set, small
XK150
Contact set, large
XK150
Bootlight assembly, less bulb
XK120 & 140
Interior lamp
XK150, not illustrated
alternative for XK120 FHC lamps
Lens for boot light
XK120 & 140
Chrome rim for boot light
XK120 & 140
Bulb, boot light
XK120 & 140
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
APPLICATION
-S- Type 3.8cc
57
XK120 Outer body panels
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
130.171
138.450
130.216
130.217
232.113
232.114
138.454
138.455
232.101
232.102
232.117
232.118
139.059
232.141
232.142
134.799
136.550
232.099
232.100
232.077
232.078
232.079
232.080
134.903
134.904
138.448
138.449
58
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Bonnet
Front fairing
RH Front wing
LH Front wing
RH Side, front wing
LH Side, front wing
RH Half front wing
LH Half front wing
RH Front lower section
LH Front lower section
RH Headlamp pod
LH Headlamp pod
Sidelamp housing, weld-on
RH Repair patch, sidelamp housing
LH Repair patch, sidelamp housing
Pair front wing braces
Front number plate panel
RH Splash plate
LH Splash plate
RH OTS Hinge face panel
LH OTS Hinge face panel
RH DHC & FHC Hinge face panel
LH DHC & FHC Hinge face panel
Pair OTS Seal channels
Pair DHC & FHC Seal channels
OTS Scuttle panel
DHC & FHC Scuttle panel
16
17
18
19
20
21
22
23
24
25
26
138.459
134.812
134.813
138.422
138.423
138.428
138.429
138.424
138.425
138.426
138.427
138.430
138.431
138.432
138.433
232.103
232.104
232.107
232.108
232.105
232.106
138.434
138.435
139.347
136.542
136.531
136.532
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
DHC Windscreen surround
DHC RH Water gutter
DHC LH Water gutter
OTS RH Door
OTS LH Door
OTS RH Door skin
OTS LH Door skin
DHC RH Door
DHC LH Door
FHC RH Door
FHC LH Door
DHC RH Door skin
DHC LH Door skin
FHC RH Door skin
FHC LH Door skin
OTS RH Shut face
OTS LH Shut face
DHC RH Shut face
DHC LH Shut face
FHC RH Shut face
FHC LH Shut face
RH Rear wing
LH Rear wing
Bolting kit for two rear wings
Copper wheel arch moulding
RH Spat cover
LH Spat cover
ILL N° PART N° 27
28
29
30
31
32
33
34
35
36
37
134.839
134.840
232.115
232.116
232.137
232.138
138.186
138.458
130.213
130.214
130.215
138.436
138.437
138.438
138.439
138.440
138.441
232.119
232.120
136.501
232.130
232.131
232.132
134.801
©
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
V a n
RH Brace bar, rear wing
LH Brace bar, rear wing
RH Rear wing repair panel
LH Rear wing repair panel
RH Rear splash panel
LH Rear splash panel
Boot lid assembly ( incl.wood )
Boot lid skin only
OTS Rear tonneau panel
DHC Rear tonneau panel
FHC Rear tonneau panel
OTS RH Tonneau side panel
OTS LH Tonneau side panel
DHC RH Tonneau side panel
DHC LH Tonneau side panel
FHC RH Tonneau side panel
FHC LH Tonneau side panel
RH Lower/side repair panel
LH Lower /side repair panel
Door, petrol filler
OTS Tonneau joint piece
DHC Tonneau joint piece
FHC Tonneau joint piece
Tie bar, front wings
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
XK120 Inner body panels
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
©
QTY DESCRIPTION
138.451 1 OTS LHD Bulkhead
138.452 1 DHC LHD Bulkhead
138.453 1 FHC LHD Bulkhead
138.419 1 Front toe board panel
232.083 1 OTS RH Side panel
232.084 1 OTS LH Side panel
232.085 1 DHC-FHC RH Side panel
232.086 1 DHC-FHC LH Side panel
232.087 4 OTS Hinge box
232.088 4 DHC-FHC Hinge box
137.706 1 Hinges pivot pin kit
139.074 4 OTS Hinge arm
136.629 4 DHC-FHC Hinge arm
137.703 A/R Shim, hinge adjusting
139.346 1 Screw kit, hinge to door
234.005 1 OTS RH Upper inner wing
234.006 1 OTS LH Upper inner wing
234.007 1 DHC-FHC RH Upper inner wing
234.008 1 DHC-FHC LH Upper inner wing
139.345 1 Fixing kit, Inner wing
232.089 1 RH Side panel, at front
232.090 1 LH Side panel, at front
232.095 1 OTS RH Lower inner wing
232.096 1 OTS LH Lower inner wing
232.097 1 DHC-FHC RH Lower inner wing
232.098 1 DHC-FHC LH Lower inner wing
234.009 1 OTS RH Sill
234.010 1 OTS LH Sill
234.011 1 DHC-FHC RH Sill
234.012 1 DHC-FHC LH Sill
V a n
G e s t e l
XK140 FHC
B & C
14 134.930 2
15 ………. 1
16 232.109 1
232.110 1
232.111 1
232.112 1
17 232.042 1
136.612 1
18 138.181 1
138.817 1
138.180 1
19 138.215 1
20 138.216 1
21 136.657 1
22 137.682 2
23 136.831 2
24 234.013 1
234.014 1
25 130.210 1
130.211 1
130.212 1
26 232.126 1
27 138.442 1
138.443 1
138.444 1
138.445 1
28 232.043 1
29 232.041 1
30 232.133 1
Seal retainer strip
See outer body panels
OTS RH ‘B’ Post
OTS LH ‘B’ Post
DHC-FHC RH ‘B’ Post
DHC-FHC LH ‘B’ Post
Gearbox cover, fibre glass
Gearbox cover, steel
OTS Propshaft tunnel
DHC-FHC Propshaft tunnel
Pair wooden floors OTS, not illustrated
RH Floor, metal DHC-FHC
LH Floor, metal DHC-FHC
Pair wooden floors, DHC-FHC
Cover plate, jack hole
Plate around jack hole, OTS
OTS early Dash support
OTS late Dash support
OTS Rear end
DHC Rear end
FHC Rear end
Boot hinge panel
OTS-FHC RH Inner wing
OTS-FHC LH Inner wing
DHC RH Inner wing
DHC LH Inner wing
Pair hood pivot post, OTS
Pair hood pivot post, DHC
DHC RH Quarter panel
ILL N° PART N° 31
32
33
34
35
36
37
39
40
41
42
43
44
45
46
232.134
232.135
232.136
136.526
138.446
138.447
232.121
232.353
232.122
232.127
232.128
136.528
136.624
232.123
232.139
232.140
232.124
232.125
138.160
138.158
139.127
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
QTY DESCRIPTION
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
DHC LH Quarter panel
FHC RH Quarter panel
FHC LH Quarter panel
Cover plate, filler pipe
OTS Battery box assembly
DHC-FHC Battery box assembly
Battery box only
Bracket, battery clamping
Front part of boot floor
Boot floor, steel wheel cars
Boot floor, wire wheel cars
OTS-FHC Wooden floor, pair
DHC Wooden floor, pair
OTS Parcel fhelf
OTS RH Side, parcel shelf
OTS LH Side, parcel shelf
DHC Parcel shelf
FHC Parcel shelf
Spare wheel tray
Fuel tank tray
Pair tank tray fillers
59
OTS
C
r FH
o
DHC
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
138.254
139.132
138.261
138.262
138.288
138.289
138.317
138.318
138.462
138.463
138.464
138.465
138.466
138.467
138.460
138.461
232.146
232.147
232.148
232.149
139.059
232.150
232.151
136.804
136.805
136.833
232.176
232.177
232.178
232.179
232.180
232.181
232.154
232.155
232.156
60
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
ILL N° PART N° Bonnet asembly
Front fairing
OTS RH Front wing
OTS LH Front wing
DHC RH Front wing
DHC LH Front wing
FHC RH Front wing
FHC LH Front wing
OTS RH Reapir panel, side
OTS LH Repair panel, side
DHC RH Repair panel, side
DHC LH Repair panel, side
FHC RH Repair panel, side
FHC LH Repair panel, side
RH Half of front wing
LH Half of front wing
RH Front piece, front wing
LH Front piece, front wing
RH Headlamp pod
LH Headlamp pod
Sidelight housing
RH Repair patch, under side lamp
LH Repair patch, under side lamp
RH Front panel, platform
LH Front panel, platform
Panel, front number plate
OTS RH Splash panel, front
OTS LH Splash panel, front
DHC RH Splash panel, front
DHC LH Splash panel, front
FHC RH Splash panel, front
FHC LH Splash panel, front
OTS RH Hinge face panel
OTS LH Hinge face panel
DHC RH Hinge face panel
QTY DESCRIPTION
232.157 1
232.158 1
232.161 1
14 134.904 1
15 138.469 1
138.470 1
16 138.468 1
17 234.019 1
234.020 1
234.021 1
234.022 1
18 138.485 1
138.486 1
19 138.487 1
138.488 1
20 138.489 1
138.490 1
138.493 1
138.494 1
21 138.491 1
138.492 1
138.495 1
138.496 1
22 232.188 1
232.189 1
232.190 1
232.191 1
232.192 1
232.193 1
23 138.497 1
138.498 1
24 139.347 1
25 136.542 2
26 136.531 1
DHC LH Hinge face panel
FHC RH Hinge face panel
FHC LH Hinge face panel
Pair Channels DHC or FHC
OTS Scuttle panel
DHC-FHC Scuttle panel
DHC Screen surround
DHC RH Roof gutter
DHC LH Roof gutter
FHC RH Roof gutter
FHC LH Roof gutter
OTS RH Door
OTS LH Door
OTS RH Door skin
OTS LH Door skin
DHC RH Door
DHC LH Door
FHC RH Door
FHC LH Door
DHC RH Door skin
DHC LH Door skin
FHC RH Door skin
FHC LH Door skin
OTS RH Shut face
OTS LH Shut fase
DHC RH Shut face
DHC LH Shut face
FHC RH Shut face
FHC LH Shut face
RH Rear wing
LH Rear wing
Rear wing fixing kit
Copper moulding, wheel arch
when no spats are fitted
RH Spat plate, disc wheel cars
ILL N° PART N° 27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
136.532
134.839
134.840
232.200
232.201
232.208
232.209
138.499
138.500
130.221
130.222
130.223
234.028
234.029
234.030
234.031
234.032
234.033
232.205
232.206
136.501
232.202
232.203
232.204
232.207
136.776
137.472
139.133
139.134
232.159
232.160
©
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
V a n
LH Spat plate, disc wheel cars
RH steady bar
LH Steady bar
RH Rear wing repair panel
LH Rear wing repair panel
RH Splash plate, rear
LH Splash plate, rear
Boot lid assembly
Skin, boot lid
OTS Tonneau panel
DHC Tonneau panel
FHC Tonneau panel
OTS RH Side, tonneau repair
OTS LH Side, tonneau repair
DHC RH Side, tonneau repair
DHC LH Side, Tonneau repair
FHC RH Side, tonneau repair
FHC LH Side, tonneau repair
RH Lower repair piece
LH Lower repair piece
Door, petrol filler
OTS Joining piece, tonneau
DHC Joining piece, tonneau
FHC Joining piece, tonneau
Panel below boot lid
Rear number plate panel
Vent door, outer piece only
RH Vent mechanism
LH Vent mechanism
RH Vent box
LH Vent box
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
FHC
DHC
OTS
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
©
138.479
138.480
138.481
138.482
138.483
138.484
138.344
232.184
232.185
232.186
232.187
139.126
137.706
139.136
139.137
137.943
232.162
232.163
232.164
232.165
232.166
232.167
136.683
136.684
232.168
232.169
138.472
138.471
138.473
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
4
1
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
OTS LHD Bulkhead
OTS RHD Bulkhead
DHC LHD Bulkhead
DHC RHD Bulkhead
FHC LHD Bulkhead
FHC RHD Bulkhead
Toeboard panel
OTS RH Bulkhead side
OTS LH Bulkhead side
DHC-FHC RH Bulkhead side
DHC-FHC LH Bulkhead side
Hinge box
Pin kit, hinges
OTS Arm, door hinge
DHC Arm, door hinge
FHC Arm, door hinge
OTS RH Top inner wing
OTS LH Top inner wing
DHC RH Top inner wing
DHC LH Top inner wing
FHC RH Top inner wing
FHC LH Top inner wing
RH Radiator side panel
LH Radiator side panel
RH Lower inner wing
LH Lower inner wing
RHD RH Lower inner wing
LHD LH Lower inner wing
OTS-DHC LHD Battery box
G e s t e l
XK140 FHC
B & C
ILL N° PART N° 13
14
15
16
17
18
19
20
21
22
23
24
25
26
QTY DESCRIPTION
138.476
138.474
138.478
232.170
232.171
232.172
232.173
232.174
232.175
232.182
232.183
234.024
234.025
234.026
234.027
232.194
232.195
232.196
232.197
232.198
232.199
134.930
138.290
232.008
137.682
136.831
138.298
138.299
232.369
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
2
1
1
1
OTS-DHC RHD Battery box
FHC LHD Battery box
FHC RHD Battery box
OTS-DHC LHD Door
OTS-DHC RHD Door
FHC LHD RH Door
FHC LHD LH Door
FHC RHD RH Door
FHC RHD LH Door
LHD Support bracket, batt.box
RHD Support bracket, batt.box
OTS-DHC RH Sill
OTS-DHC LH Sill
FHC RH Sill
FHC LH Sill
OTS RH ‘B’ Post
OTS LH ‘B’ Post
DHC RH ‘B’Post
DHC LH ‘B’ Post
FHC RH ‘B’ Post
FHC LH ‘B’ Post
Seal retainer strip
OTS-DHC Pair floorboards
FHC Pair floorboards
Jack hole cover plate
Plate, jack hole surround
Gearbox cover, steel
Turret, fibre glass
ILL N° PART N° 27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
130.188
130.218
130.219
130.220
138.505
138.506
136.753
137.852
232.043
232.041
139.139
139.140
139.141
139.142
138.502
138.503
136.737
136.752
138.508
232.211
232.212
138.507
138.509
136.737
232.016
232.210
232.378
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Floorpan
OTS Rear end assembly
DHC Rear end assembly
FHC Rear end assembly
RH Inner rear wing
LH Inner rear wing
Cover, filler neck
Spare wheel mounting bracket
OTS Pair pivot posts for hood
DHC Pair pivot posts for hood
DHC RH ¼ panel, rear
DHC LH ¼ panel, rear
FHC RH ¼ panel, rear
FHC LH ¼ panel, rear
OTS Rear diff.cover
DHC-FHC Rear diff.cover
Tray, back of spare wheel
Front part, spare wheel tray
OTS Parcel shelf
OTS RH Shelf side
OTS LH Shelf side
DHC Parcel shelf
FHC Parcel shelf
Tray, spare wheel
Inspection panel
Boot hinge panel
Pair tire tray corners
61
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
138.354
232.225
138.345
138.346
138.510
138.511
138.512
138.513
138.517
138.518
232.215
232.216
232.223
232.224
232.217
232.218
139.059
232.219
232.220
136.941
136.942
136.990
232.244
232.245
232.246
232.247
232.248
232.371
232.372
232.373
232.374
62
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
ILL N° PART N° Bonnet
Front fairing assembly
OTS RH Front wing
OTS LH Front wing
DHC RH Front wing
DHC LH Front wing
FHC RH Front wing
FHC LH Front wing
RH Side repair piece
LH Side repair piece
RH Half front wing
LH Half front wing
RH Quarter of front wing
LH Quarter of front wing
RH Headlamp pod
LH Headlamp pod
Side lamp housing
RH Path under side lamp
LH Path under side lamp
RH Plinth panel
LH Plinth panel
Front number plate panel
RH Splash plate, above batt.box
LH Splash plate, above batt.box
LH Splash plate & reservoir shield
RH Splash plate, check drawing
LH Splash plate, check drawing
18
19
20
21
22
23
24
25
26
27
28
29
232.375
138.515
138.516
138.514
232.226
232.227
232.228
232.229
232.230
232.231
232.232
232.233
137.722
136.944
139.145
139.146
139.147
139.148
137.472
136.943
138.519
138.520
138.521
138.522
138.523
138.524
138.525
138.526
232.260
232.261
232.262
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
RH Splash plate with hole
OTS Scuttle top
DHC-FHC Scuttle top
DHC Screen frame
OTS RH ‘A’ Post face
OTS LH ‘A’ Post face
DHC-FHC RH ‘A’ Post face
DHC-FHC LH ‘A’ Post face
RH early Vent box
LH early Vent box
RH late Vent box
LH late Vent box
Early gauze, flat
Late gauze, curved
RH early Mechanism
LH early Mechanism
RH late Mechanism
LH late Mechanism
Door, early ventilation
Door, late ventilation
OTS RH Door
OTS LH Door
DHC-FHC RH Door
DHC-FHC LH Door
OTS RH Door skin
OTS LH Door skin
DHC-FHC RH Door skin
DHC-FHC LH Door skin
OTS RH Shut face
OTS LH Shut face
DHC RH Shut face
ILL N° PART N° 30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
232.263
232.264
232.265
138.362
138.363
232.272
232.273
136.542
232.287
232.288
134.839
134.840
130.233
130.234
234.041
234.042
234.043
234.044
234.045
234.046
232.276
232.277
232.274
232.275
232.278
136.501
137.717
136.692
139.150
136.958
©
QTY DESCRIPTION
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
V a n
DHC LH Shut face
FHC RH Shut face
FHC LH Shut face
RH Rear wing
LH Rear wing
RH Rear wing repair
LH Rear wing repair
Wheel arch brass strip
RH Splash plate, rear
LH Splash plate, rear
RH Brace, rear wing
LH Brace, rear wing
OTS Tonneau panel
DHC-FHC Tonneau panel
OTS RH Tonneau side
OTS LH Tonneau side
DHC RH Tonneau side
DHC LH Tonneau side
FHC RH Tonneau side
FHC LH Tonneau side
RH Lower side repair
LH Lower side repair
OTS Tonneau joining
DHC-FHC Joining
Rear lower panel
Early petrol filler lid
Early hinge mechanism
Early filler box
Late filler lid & hinge
Late filler box
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
©
130.224
130.225
130.226
130.227
130.228
130.229
232.251
232.252
232.253
232.254
232.257
232.255
232.256
234.034
234.035
234.036
234.037
232.236
232.237
232.238
232.239
232.234
232.235
232.291
136.980
136.981
139.014
139.015
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
OTS LHD Bulkhead
OTS RHD Bulkhead
DHC LHD Bulkhead
DHC RHD Bulkhead
FHC LHD Bulkhead
FHC RHD Bulkhead
OTS RH Side, bulkhead
OTS LH Side, bulkhead
DHC-FHC RH Side, bulkhead
DHC-FHC LH Side, bulkhead
Dash side panel
RH Repair, bulkhead
LH Repair, bulkhead
OTS RH Top inner wing
OTS LHTop inner wing
DHC-FHC RH Top inner wing
DHC-FHC LH Top inner wing
OTS RH Inner wing, lower
OTS LH Inner wing, lower
DHC-FHC Inner wing, lower
DHC-FHC Inner wing, lower
RH Radiator side panel
LH Radiator side panel
Support bridge
RH Support bracket
LH Support bracket
RH Bracket, wing
LH Bracket, wing
G e s t e l
XK140 FHC
B & C
ILL N° PART N° 11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
QTY DESCRIPTION
232.240
232.241
232.243
232.242
232.006
232.007
232.009
232.370
232.008
137.682
136.831
138.527
232.258
232.259
139.002
137.706
139.368
232.270
232.271
234.039
234.040
134.930
232.266
232.267
232.268
232.269
130.230
130.231
1
1
1
1
1
1
1
1
1
2
2
1
4
4
4
1
1
1
1
1
1
2
1
1
1
1
1
1
RH Battery box, LHD cars
RH Battery box, -S- OTS only
RH Battery box, RHD cars
LH Battery box
RH Door, battery box
LH Door, battery box
Turret only, fibre glass
Pair wooden floors
Cover plate, jack hole
Surrounding plate
Floor
OTS Hinge box
DHC-FHC Hinge box
Arm, door hinge
Pin kit, door hinge
Screw kit, hinges, 96 pieces
RH Bracket body/chassis
LH Bracket body/chassis
RH Sill
LH Sill
Stril, seal retainer
OTS RH ‘B’ Post
OTS LH ‘B’ Post
DHC-FHC RH ‘B’ Post
DHC-FHC LH ‘B’ Post
OTS Rear end assembly
DHC Rear end assembly
ILL N° PART N° 130.232 1
28 138.528 1
138.529 1
29 136.753 1
30 232.281 1
232.282 1
31 232.280 1
32 139.369 1
33 232.283 1
232.284 1
34 232.285 1
232.286 1
35 232.279 1
36 138.530 1
37 232.290 1
38 232.016 1
39 136.752 1
40 136.737 1
41 137.852 1
42 232.289 1
43 138.531 1
44 138.552 1
45 234.038 1
46 232.249 1
47 232.250 1
48 232.379 1
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
QTY DESCRIPTION
-S- Type 3.8cc
FHC Rear end assembly
RH Inner wing
LH Inner wing
Cover, filler tube
DHC RH Quarter panel
DHC LH Quarter panel
DHC Pair hood posts
DHC Pair pivot brackets
FHC RH Outer quarter panel
FHC LH Outer quarter panel
FHC RH Inner quarter panel
FHC LH Inner quarter panel
OTS Pair hood post brackets
Diff.cover panel
Upper boot floor
Cover panel
Spare wheel extension
Spare wheel tray, rear part
Bracket, spare wheel fixing
OTS Parcel shelf
Early boot hinge panel
Late boot hinge panel,
when spring loaded hinges are fitted
-S- RH Inner wing
-S- Above battery box panel
-S- Top panel, airbox
Pair tire tray corners
63
Body hardware, boot parts & vent box
1 121.089 A/R
2 168.261 A/R
139.125 A/R
137.668 A/R
3 150.144 A/R
4 139.371 1
5 139.372 1
139.373 1
6 139.376 1
7 161.133 A/R
161.135 A/R
161.390 A/R
8 161.134 A/R
161.388 A/R 161.136 A/R
161.138 A/R
9 163.248 A/R
163.251 A/R
10 165.863 18
11 137.856 1
137.853 1
12 137.850 3
13 232.015 1
14 232.378 1
232.379 1
15 137.862 1
16 137.851 1
17 133.486 1
133.487 1
18 141.324 2
64
Black felt strip 33 x 4mm
Sold by the running meter
Fibre washers, 3/8”ID
1/2” Aluminium chassis spacer
3/4” Aluminium chassis spacer
Black felt sheet 125x76cm
120 Dzus fastener kit
140 DHC-FHC Dzus fastener kit
140 OTS & all 150 Dzus fastener kit
Dzus fastener kit, Gearbox cover
Cage for 10mm square nut
Cage for 12.3mm square nut
Cage for 14mm square nut
Square nut 9.5mm,10-32UNF (3/16”)
Square nut 11mm, ¼”UNF thread
Square nut 12mm, 5/16”UNF thread
Square nut 12mm, 5/16”BSF thread
Oval washer 1/4”I.D. 1.1/2”x ¾”
Oval washer 5/16”I.D. 1.9/16”x1”
Screw, spare wheel tray fixing
Spare wheel hold down
Spare wheel hold down
Hinge, cover board
Spare wheel cover board
Pair spare tire tray corners
Pair spare tire tray corners
Spare wheel lid hold down strap
Lift tab, spare wheel lid
RH Budget lock
LH Budget lock
Escutcheon, spat plates
APPLICATION
ILL N° PART N° body/chassis
19 162.645 4 Screw, 4Ba
20 136.529 1 Locking mechanism, boot lid
21 137.709 2 Guides for bars, on boot lid
22 137.710 2 Sockets, boot lock on body
23 137.662 1 Clamp for steel wheel
137.714 1 Clamp for wire wheel
24 161.740 1 Nut for steel wheel clamp
161.743 1 Nut for wire wheel clamp
25 137.715 1 Hinge pin for spare wheel clamp
26 134.979 1 Prop assembly, boot lid
134.971 1 Prop assembly, boot lid
27 136.757 1 Boot lock mechanism set
28 136.758 1 Cable set only
29 134.890 2 ‘U’ Bar, boot lock
30 232.230 1 RH Vent box assembly for flat mesh
232.231 1 LH Vent box assembly for flat mesh
31 121.520 2 Seal vent box, flat mesh type
121.731 2 Seal vent box, curved mesh type
32 137.722 2 Mesh, flat
33 136.944 2 Mesh, curved
34 171.113 4 Spring, vent door, curved type
35 137.723 1 RH Vent hinge & plugner
137.724 1 LH Vent hinge & plugner
36 137.725 2 Vent plugner
37 165.797 18 Floor screw 1/4”BSF x 1.1/8”
38 190.058 1 Catalogue for BSF-UNF fasteners
body mounting
battery box cover
battery box cover
battery box door
(2 pieces)
rear wing to body
XK140-150
XK140-150 wire wheel
XK140-150 disc wheel
XK140-150
XK140-150
XK140
XK150
XK140-150
XK140-150
boot board or spat plate
boot board or spat plate
QTY DESCRIPTION
APPLICATION
©
V a n
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120 & XK150 if fitted
XK140
XK140-150
XK140-150
XK140-150
XK120-140 & early 150
XK120-140 & early 150
( up to XK150 August 1958)
1949 up to 08-‘58
20.5cm x 8 cm
08-’58 on
19.5 cm x 7.5 cm
1949 up to 08-‘58
08-’58-on
08-’58-on
XK120
XK120
1949 up to 08-‘58
XK120
Full colour print
clips, seals, lamps, mirrors etc..
136 pages
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Bonnet hinges, bonnet catches & bonnet props
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
20
21
22
23
24
©
136.543
136.543
136.834
136.978
136.979
232.028
232.029
136.545
139.084
139.080
136.546
136.544
137.733
134.804
134.805
139.076
137.734
122.448
134.803
137.731
137.732
172.995
232.053
139.079
139.080
136.544
137.733
V a n
QTY DESCRIPTION
2
2
2
1
1
2
2
1
1
1
1
1
1
1
1
1
1
6
1
1
1
1
1
1
1
1
1
Bonnet hinge
Bonnet hinge
Bonnet hinge
Bonnet hinge, RH
Bonnet hinge, LH
Bonnet hinge, early cars (LHD 1957)
Bonnet hinge, late cars (LHD ’57-on)
Hook & Stricker assembly
Hook only
Peg and spring, bonnet catch
Mounting plate
Bonnet catch, mechanism
Guide plate for bonnet catch
Control cable with chrome knob
Control cable with plastic knob
Bonnet cable adjuster & post ass.
Adjuster only
Bonnet buffer
Bonnet prop
Pivot bracket, to bonnet
Socket for prop, to inner wing
Clip, prop to bonnet, when not in use
Mounting plate with hook & pin
Hook only
Peg, spring and cup washer
Bonnet catch & release mechanism
Guide plate, bonnet catch
G e s t e l
XK140 FHC
B & C
APPLICATION
XK120
XK140 OTS & DHC
XK140 FHC
XK150 OTS
XK150 OTS
XK150 DHC & FHC
XK150 DHC & FHC
XK120
XK120
XK120
XK120
XK120
XK120
XK120 originel type
alternative type
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK140
XK140
XK140
XK140
XK140
25 139.076 1 Bonnet cable adjuster assembly
26 134.805 1 Control cable
27 134.897 1 Bonnet prop
28 141.993 1 Escutcheon, on bonnet
29 139.048 1 Bracket for rubber clamp
30 139.028 1 Rubber clamp, when not in use
32 137.931 1 Bracket on bonnet , bonnet prop pivot
33 137.932 1 Clip on bnnet, when prop is not in use
34 137.663 1 Bracket on radiator, for prop when
35 122.448 6 Bonnet buffer
40 139.019 1 Bonnet catch peg assembly
41 139.383 1 Bonnet peg, spring and cup washer
42 232.044 1 Bonnet release catch assembly
43 139.021 1 Stricker plate only
44 136.992 1 Bonnet safety catch, hook
45 171.115 1 Spring for hook
46 134.955 1 Bonnet control cable
47 139.076 1 Bonnet cable adjuster assembly
49 137.892 1 Pivot, bonnet prop at wing valance
50 139.066 1 Receiver plate, fits to bonnet
51 139.028 1 Rubber prop retainer, when not in use
52 122.448 10 Bonnet buffer
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK140
XK140
XK140 OTS-DHC
XK140 OTS-DHC
XK140 OTS-DHC
XK140 OTS-DHC
XK140 FHC
XK140 FHC
XK140 FHC
XK140 FHC
bonnet is in open possition
XK140 FHC
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
65
Bumpers XK120
1 134.807 1 Support member
2 134.808 1 RH Strut
134.809 1 LH Strut
3 134.806 2 Spring bar, front bumper
4 140.415 2 Front bumper bar
5 139.393 1 Front bumpers mounting kit
6 162.524 2 Screw, strut to chassis
8 161.026 6 Nut, bumper bar to spring bar
10 163.014 6 Washer, plain
11 162.212 2 Bolt, inner
12 165.782 2 Bolt, outer
14 161.667 4 Dome nut, spring bar to extension
16 165.490 4 Extension, chrome plated
17 163.324 4 Washer, spacer on extension, chrome
18 168.260 8 Rubber washer at each side of wing
19 163.325 4 Distance piece, tapered
21 136.499 1 RH Bracket, steel wheel cars
136.498 1 LH Bracket, steel wheel cars
136.548 1 RH Bracket, wire wheel cars
136.549 1 LH Bracket, wire wheel cars
66
APPLICATION
XK120
XK120
XK120
XK120
XK120
Top quality parts
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
136.611
140.416
139.394
122.416
162.113
162.524
161.010
165.794
137.736
164.050
161.667
161.668
163.005
164.031
140.445
140.565
141.979
163.240
164.016
161.072
136.552
122.459
QTY DESCRIPTION
2
1
1
2
4
2
4
2
2
2
2
4
4
4
1
1
1
1
1
1
1
4
APPLICATION
Spring bar, mounting over-rider
Over-rider, pair
Rear over-riders mounting kit
Rubber grommet
(not in kit )
Bolt, spring bar to chassis (not in kit)
Bolt, spring bar to chassis (not in kit)
Nut, self locking
(not in kit)
Bolt through support bracket
Distance tube, chrome plated
Washer, shakeproof
Dome nut
Dome nut, over-rider
Washer, plain
Washer, shakeproof
Radiator grill
Early grill, raised cone
Badge on bonnet
Washer, plain
Washer, shakeproof
Nut
Rear n°plate mounting
Buffer for number plate ©
V a n
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
XK120
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
XK140-150 Bumpers and radiator grill
1 140.465 1
140.495 1
2 140.466 2
3 139.399 1
4 232.054 1
5 136.833 1
136.990 1
6 162.201 6
163.004 6
164.050 6
7 137.884 2
8 165.489 2
9 121.635 1
10 140.467 1
11 140.496 1
140.497 1
12 140.469 1
140.470 1
140.498 1
140.499 1
13 139.400 1
©
V a n
APPLICATION
Front bumper bar
XK140
Front bumper bar
XK150
Overrider, front
XK140-150
Bumper fitting kit includes: bolts,
XK140-150
washers, nuts, spacers & rubber seal. 29 pieces
Bumper iron set
XK140-150
Number plate panel, front
XK140
Number plate panel, front
XK150
Bolt, irons to chassis
XK140-150
Washer, plain
XK140-150
Washer, shakeproof
XK140-150
Spacer, outer sides only
XK140-150
Chrome bumper bolt & nut
XK140-150
I Meter seal ( for two over-riders )
XK140-150
Rear bumper - pair XK140
Rear bumper bar, 1957 to Oct.’58
XK150
88cm between overrider centres
Rear bumper bar, Oct.’58-on
XK150
69 cm between over-riders centres
RH Rear overrider
XK140-150
LH Rear overrider
XK140-150
RH rear overrider
XK150 late
LH rear overrider
XK150 late
Bumper fitting kit includes: bolts,
XK140-150,
nuts, washers, spacers & rubber
seal. 63 pieces
G e s t e l
XK140 FHC
B & C
ILL N° PART N° 14
15
16
17
18
19
20
21
22
23
24
25
26
27
30
32
33
34
232.055
232.056
165.489
137.887
137.884
121.635
122.417
122.418
140.446
162.882
141.980
140.447
142.179
165.711
142.170
141.983
134.746
134.920
134.954
139.470
139.471
161.024
141.866
162.555
136.776
QTY DESCRIPTION
1
1
2
2
2
1
2
2
1
6
1
1
1
3
1
1
1
1
1
1
1
1
1
2
1
6 Piece iron set ( see also ill. 11 )
6 Piece iron set ( see also ill. 11 )
Chrome bumper bolt & nut
Spacer, central ( two hole )
Spacer, outer ( single hole )
1 Meter seal, ( for two overriders )
Outside grommet, bumper iron/wing
Outside grommet, bumper iron/tonneau
Radiator grill
Screw for grill
Badge, radiator grill
Radiator grill
Badge holder
Screw 6-32UNC, cut to length
Backing plate, badge, fibre
Badge, radiator grill
Bonnet strip
Bonnet strip
Bonnet strip
Clip kit for bonnet strip
Clip kit for bonnet strip
Nut
Leaping cat
Screw, ¼”UNC
Rear n°plate base
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK140-150 up to Dec.’57
XK150 Dec.’57-on
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140-150
XK140
XK140
XK140
XK150
XK150
XK150
XK150
XK150
XK140 OTS-DHC
XK140 FHC
XK150 DHC-FHC
XK140
XK150
XK150
XK150 when fitted
XK150
XK140
67
Door fittings - Roadsters - OTS
1 153.651 1
2 120.116 2
3 165.491 4
4 141.993 4
5 165.787 8
6 137.394 8
7 137.707 2
8 137.686 1
137.687 1
9 137.701 2
10 141.975 1
141.976 1
11 165.765 2
164.124 2
12 141.977 2
13 172.984 8
14 137.690 2
15 165.766 4
16 152.260 2
17 137.702 2
18 165.741 4
19 161.761 12
20 141.932 2
21 165.772 8
68
APPLICATION
XK120-140 OTS
Pair frame, upper & lower part
Window ‘Lexan’ ( kind of perspex )
Knob, side windows to door
Escutcheon for knob
Screw securing escutcheons
Crash roll plug, polished chrome
Door hinge stop plate
RH Door lock assembly
LH Door lock assembly
Safety catch assembly, door locks
RH Knob, door locking
LH Knob, door locking
Screw, knob fixing
Shakeproof washer
Escutcheon plate
Rivet securing escutheon plates
Bracket securing lanyard
Screw for bracket
Swivel, lanyard end
Door stricker, chrome plated
Screw with cheesehead for stricker
Nut, nylock, 2BA
Pair door dovetail
Screw, 2BA countersunk, slotted
not trimmed
at bottom hinge only
APPLICATION
XK150 OTS
30 232.014 2 Chrome frame, door glass
31 120.135 2 Door glass, without frame
32 137.903 2 Window channel
33 232.010 1 RH Window regulator
232.011 1 LH Window regulator
34 139.391 2 Repair kit, window regulator
35 142.097 2 Handle, window regulator
36 141.360 2 Escutcheon
37 234.150 1 Pair chrome door cappings
38 142.191 1 Pair top plates ‘B’ post
39 121.619 2 Rubber seal at top edge
40 134.097 1 2 Meter inner waither strip,
41 134.978 1 Pair Chrome trim strips (66cm)
42 152.256 10 Clip for strip to door panel
43 137.970 2 Door check strap
44 172.879 2 Clevis pin
45 134.938 2 Seal retaining plate, bottom
46 137.941 1 RH Door lock & remote control
137.942 1 LH Door lock & remote control
47 142.140 2 Chrome escutcheons, slide knob
48 165.478 4 Chrome screw for escutcheons
49 142.138 1 RH Sliding knob
142.139 1 LH Sliding knob
50 165.897 2 Small screw for knob
51 137.997 1 RH Stricker plate, fitted to door
137.998 1 LH Stricker plate, fitted to door
52 165.857 6 Screw securing lock & stricking plate
53 135.885 1 RH Stricker plate, to ‘B’ post
135.886 1 LH Stricker plate, to ‘B’ post
135.887 A/R Packing plate, door adjusting
54 135.888 2 Tapping plate
55 165.918 4 Screw, stricker to ‘B’ post
©
V a n
cut to lenght
Raised countersunk slotted, 2BA
Flat countersunk slotted
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Door fittings - coupè’s - DHC &FHC
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
©
140.471
140.472
140.513
140.514
120.120
120.179
140.449
140.515
120.119
120.140
137.903
137.904
137.905
142.205
142.206
136.625
136.626
136.860
136.861
136.925
136.926
139.391
139.392
142.097
141.360
172.204
142.117
142.105
165.470
142.103
142.104
137.780
137.781
139.053
137.777
139.054
232.051
140.510
140.511
138.418
120.126
120.129
120.137
120.125
120.130
120.136
120.127
120.131
120.138
142.126
142.127
142.176
142.177
142.125
142.126
V a n
QTY DESCRIPTION
1
1
1
1
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
2
2
2
2
6
1
2
4
1
1
1
1
2
2
2
1
1
1
1
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
RH Frame for ¼ light
LH Frame for ¼ light
RH Frame for ¼ light
LH Frame for ¼ light
Glass only
Glass only
Chrome frame, door glass
Chrome frame, door glass
Door glass
Door glass
Channel, door glass
RH Guide, door glass
LH Guide, door glass
RH Guide, door glass
LH Guide, door glass
RH Window regulator
LH Window regulator
RH Window regulator LH Window regulator
RH Window regulator, twin arm
LH Window regulator, twin arm
Repair kit, window regulator
Repair kit, twin arm regulator type
Window winder handle
Escutcheon
Key pin, handles
Pair upper pivot’s, quarter light
Stricker plate, locking handle
Special small screw, stricking plate
RH Locking handle
LH Locking handle
RH Friction pivot
LH Friction pivot
Friction pivot, not handed
Spindle only
Spindle only
Upper seal retainer set RH Chrome roof gutter
LH Chrome roof gutter
Pair aluminium cannels for above
Glass, front quarter light
Glass, door
Glass, door
Glass, door
Glass, rear quarter light
RH Catch, rear quarter light
LH Catch, rear quarter light
G e s t e l
XK140 FHC
B & C
APPLICATION
ILL N° PART N° XK120-140 DHC
XK120-140 DHC
XK150 DHC
XK150 DHC
XK120-140 DHC
XK150 DHC
XK120-140 DHC
XK150 DHC
XK120-140 DHC
XK150 DHC
23 165.568 2
24 142.128 2
25 121.713 2
121.593 2
26 134.097 2
27 142.100 2
142.100 2
28 159.497 1
29 161.759 4
30 134.977 2
31 152.256 10
32 142.198 1
33 142.092 1
142.093 1
137.901 1
137.902 1
34 142.098 1
142.099 1
35 165.820 8
36 141.994 1
141.995 1
37 166.072 8
38 137.742 2
39 142.094 2
40 141.360 2
41 137.941 1
137.942 1
42 137.915 1
137.916 1
43 162.554 4
44 164.009 4
45 137.917 2
46 137.941 1
137.942 1
47 142.140 2
48 165.478 4
49 142.138 1
142.139 1
50 165.897 2
51 137.997 1
137.998 1
52 165.857 6
53 135.885 1
135.886 1
135.887 A/R
54 135.888 2
55 165.918 4
56 137.970 2
57 172.879 2
XK120-140 DHC
XK120-140 DHC
XK150 DHC
XK150 DHC
XK120 DHC-FHC
XK120 DHC-FHC
XK140 DHC
XK140 DHC
XK140 FHC & XK150 DHC-FHC
XK120 DHC-FHC
DHC & FHC
DHC & FHC
DHC & FHC
DHC & FHC
DHC & FHC
XK120 DHC-FHC,XK140 DHC
XK140 FHC,XK150 DHC-FHC
XK140 FHC,XK150 DHC-FHC
XK120 FHC
XK150 FHC
XK150 FHC
XK150 FHC
XK120 FHC
XK140 FHC
XK150 FHC
XK120 FHC
XK140 FHC
XK150 FHC
XK120 DHC
XK140 FHC
XK150 FHC
XK120 FHC
XK120 FHC
XK140 FHC
XK140 FHC
XK150 FHC
XK150 FHC
QTY DESCRIPTION
Securing screw for catch
Cover, rear quarter catch
Piping along door edge platstic/hollow
Piping along door edge, solid rubber
Weather strip, 2 meter, cut to length
Finger pull on door capping, chrome
Finger pull on door capping, chrome
Pair armrests, untrimmed
Special nut, armrest
Chrome door strip, inside 75cm
Clip for door strip
Pair -S- badges on door
RH Door lock
LH Door lock
RH Door lock
LH Door lock
RH Cover plate, chrome plated
LH Cover plate, chrome plated
Small woodscrew, slotted & chrome
RH Door striker on ‘B’ post
LH Door striker on ‘B’ post
Screw, door stricker
Tapping plate, ‘B’ post
Inner door handle
Escutcheon
RH Door lock assembly
LH Door lock assembly
RH Door stricker, on ‘B’ post
LH Door stricker, on ‘B’ post
Screw for stricker plate
Washer, shakeproof
Tapping plate
RH Door lock & remote control
LH Door lock & remote control
Chrome escutcheons, slide knob
Chrome screw for escutcheons
RH Sliding knob
LH Sliding knob
Small screw for knob
RH Stricker plate, fitted to door
LH Stricker plate, fitted to door
Screw securing lock & stricker plate
Raised countersunk slotted, 2Ba
RH Stricker plate, to ‘B’ post
LH Stricker plate, to ‘B’ post
Packing plate, door adjusting
Tapping plate
Screw, stricker to ‘B’ post
flat countersunk slotted Door check strap
Clevis pin
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK120 DHC-FHC & XK140 DHC
to glass, inner/outer
XK120 DHC
XK140 DHC-FHC
XK150
XK150
XK150 DHC-FHC
XK150’S’
XK120 DHC-FHC
XK120 DHC-FHC
XK140 DHC
XK140 DHC
XK120 DHC-FHC, XK140 DHC
XK120 DHC-FHC
XK120 DHC-FHC
XK140 FHC
XK140 FHC
XK140 FHC
XK140 FHC
XK140 FHC
XK140 FHC
XK140 FHC
XK150 DHC-FHC
XK150 DHC-FHC
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
XK150
69
Body fittings - Handles & boot lid fittings
1 141.874 1
141.875 1
141.876 1
142.141 1
141.877 1
2 141.870 1
3 141.871 1
141.871 1
4 141.873 1
5 016.816 2
6 016.817 1
7 141.978 1
8 142.173 2
9 122.468 1
10 139.039 2
11 137.866 3
12 171.143 2
13 163.375 2
14 173.101 2
15 139.103 2
16 134.891 1
17 134.907 1
18 134.889 1
19 141.981 1
20 141.936 1
21 142.134 1
70
Lockset: ignition, boot & petrol Lockset: ignition, doors, boot & petrol
Lockset: ignition, boot & petrol
Lockset: ignition, doors, boot & petrol
Lockset: ignition, doors, boot, & petrol Handle and lock set: Door handles,
boot handle and ignition lock
Pair door handles with key
Pair door handles with key
Boot handle assembly with key
Fibre gasket for door handle
Fibre gasket for boot handle
Replacement lock assembly, petrol cap
Empty door handle, chrome plated
Seal set, for two handles
Buttom, chrome casting piece only
Barrel & key.(doors or bootlid )
Spring
Hexagonal washer for door button
Circlip
Stricker, door button actuator
Chrome strip on tonneau deck
Chrome strip on tonneau deck
Boot badge plinth & boot strip
Badge, boot lid Empty boot lid handle, chrome plated
Chrome strip, under boot lid handle
APPLICATION
XK120 DHC-FHC
XK140 OTS
XK140 DHC
XK120 DHC-FHC
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
XK120 DHC-FHC
XK140 DHC
XK120
XK120 & XK140 DHC
XK120
all
See also ill. Nr.1
XK140 OTS
XK140 DHC-FHC
XK140
XK140
XK140
XK140
142.133
134.967
141.984
142.193
122.458
084.865
142.213
142.194
122.459
142.212
171.143
163.375
173.101
139.083
136.501
137.717
108.245
108.187
136.692
137.718
139.150
108.246
137.976
122.453
136.958
137.977
QTY DESCRIPTION
1
1
1
1
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
APPLICATION
‘Gooseneck’ Plinth rear number plate
Boot badge holder & boot strip
Boot badge,’Le Mans’
Empty boot handle, chrome plated
Rubber buffer, under end of handle
Housing, rear number plate lamp
Pair chrome side strips, early type
One chrome side strip, late style
Buffer, lumber plate
Boot barrel casing, chrome plated
Spring
Hexagon washer
Circlip
Stricker
Lid, petrol filler
Hinge mechanism
Cap to hold flat seal
Seal, filler cap, flat type
Filler box
Stricker for lock
Filler lid & hinge
Spring, both types
Cap to hold the dome seal
Dome seal, filler cap 1958-on
Filler box
Catch bracket assembly
©
V a n
XK140
XK150
XK150
XK150
XK150
XK150
XK150 ’57-‘59
XK150 ’59-‘61
1949-‘58
1949-‘58
1949-‘58
1949-‘58
1949-‘58
1949-‘58
1958-on
1958-on
1958-on
1958-on
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Windscreens, rear window & rear quaterlight seals
1 142.302 1
2 121.679 1
3 159.513 1
4 121.525 1,5
5 140.443 1
140.444 1
6 140.442 1
7 137.685 2
8 162.244 4
163.031 4
164.050 4
162.674 4
163.014 4
164.025 4
9 161.742 1
10 141.974 2
11 141.973 1
12 140.441 1
13 120.114 2
121.434 2
14 166.076 16
15 200.830 1
16 165.883 4
17 165.496 5
18 152.002 2
20 121.533 1
21 120.117 2
22 136.607 1
140.612 1
©
V a n
Complete screw kit, windscreen
Pair side pillar pads, rubber
Central pillar pad, rubber
Seal, screen to body
RH Piller, chrome plated
LH Piller, chrome plated
Central piller
Tapping plate, ½” BSF
Bolt, side pillars, BSF ½ BSF
Washer, plain, ½”
Washer shakeproof, ½”
Bolt, side pillar, 3/8” UNF
Washer, plain, 3/8”
Washer, shakeproof
Long nut, central pillar fixing
Side hook, hood clamping
Central hook, hood clamping
Pair windscreen frames, without glass
Windscreen glass
Glazing seal
3Ba Screw, frame assembling
3Ba tap, drill 3.45mm before tapping
Screw, hooks to side pillar
Screw, side pillar to frame and
hook to central pillar, cut to length !
Stud for “Lift the Dot”
Windscreen seal, rubber
Windscreen glass
Pair Screen moulding, chrome
Windscreen surround (10 pieces) + seal kit
G e s t e l
XK140 FHC
B & C
APPLICATION
APPLICATION
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120 OTS
XK120 OTS
XK120 OTS
XK140 OTS
XK140 OTS
XK140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
23 136.609
136.610
24 140.454
165.846
163.055
25 121.695
121.541
26 120.124
120.132
27 140.494
28 137.963
29
30 121.540
121.633
31 120.133
32 134.958
134.959
33 134.960
34 134.961
35 134.963
134.964
36 121.542
37 120.139
38 140.512
39 137.963
40 121.593
41 121.618
42 121.739
43 121.689
121.689
44 121.688
1
1
1
16
16
1
1
1
1
1
1
Central moulding, chrome Central inner strip, chrome
Aluminium surround, inside
Screw for surround
Cup washers
Seal, rear window
Seal, rear window
Glass, rear window
Glass, rear window
Chrome surrounding, external
Chrome finisher, joint piece
XK120-140 DHC, FHC
XK120-140 DHC, FHC
XK120 FHC
XK120 FHC
XK120 FHC
XK120 FHC
XK140 FHC
XK120 FHC
XK140 FHC
XK140 FHC
XK140 FHC
1
4
1
1
1
1
1
1
1
1
1
1
1
2,5
2,5
2
1
2
1
Windscreen seal, rubber
Insert seal, sold by the running meter
Windscreen glass
Top finisher
Top finisher
Bottom finisher
Pair Finisher pillars
RH Finisher
LH Finisher
Seal, rear window glass
Glass, rear window
Chrome finisher strip, external
Chrome finisher, joint piece
Seal rear quarter frame to body
Seal between inner & outer frame
Seal, insert door to rear quarter light
185cm Door channel felt
185cm Door channel felt Seal kit, front quarter lights
XK150
XK150
XK150
XK150 OTS
XK150 DHC-FHC
XK150
XK150 OTS
XK150 DHC-FHC
XK150 DHC-FHC
XK150 FHC
XK150 FHC
XK150 FHC
XK150 FHC
FHC’s only
FHC’s only
FHC’s only
DHC’s
FHC’s
DHC or FHC
XK120-140 OTS
XK120-140 DHC, FHC
XK120-140 DHC, FHC
XK120-140 DHC, FHC
XK120 FHC early
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
71
Door area & boot lid seals
1 121.524 3
121.524 4
121.524 3
2 121.525 2
3 121.524 2
4 121.590 5
121.590 2
5 121.525 2
6 121.093 9
7 121.524 8
8 121.524 6
9 121.524 2
10 121.525 2
11 121.523 3
121.526 3
121.526 3
72
One meter A-post & sill seal
One meter B-post seal
One meter door bottom seal One meter seal for: A-post,
screen pillars & hood frame to door
One meter seal for hood frame/door
One meter seal arround doors
One meter seal, door arround
One meter seal, door arround exept
B-post section
One meter seal, door bottom
One meter boot lid seal, early
OTS up to 674940 DHC up to 678141
One meter boot lid seal, late
1954 – on
One meter boot lid seal
APPLICATION
XK140 OTS
XK150 OTS
XK150 OTS
all DHC
XK120-140 DHC
12 121.524 1
13 121.526 4
14 121.526 3
15 159.645 1
159.646 1
159.647 1
159.648 1
159.649 1
159.709 1
159.648 1
159.649 1
159.710 1
16 121.628 2
121.628 1
17 137.394 8
18 122.224 4
122.447 2
122.534 4
XK150 DHC
all DHC
all XK150
XK120 FHC
XK140 FHC
XK150 FHC
XK140-150 FHC
XK120 OTS-DHC
up tu approx.1954
XK120 OTS-DHC
XK120 FHC
QTY DESCRIPTION
APPLICATION
One meter boot lid bottom seal
Black piping set, for one car
White piping set, for one car
Red piping set, for one car
Green piping set, for one car
Dark blue piping set, for one car
Maroon red piping set, for one car
Green piping set, for one car
Dark blue piping set, for one car
Light blue piping set, for one car
Other piping available, see our
Catalogue number 190.058
3 Meter lenght crash roll rubber
3 Meter length crash roll rubber
Peg, crash roll ends, chrome plated
Grommet in boot/chassis
Grommer for jack socket in chassis
Grommet, sill blanking
©
V a n
all XK120
all XK140
all XK150
XK120 OTS
XK140 OTS
XK120-140 OTS
XK140-150
all
all
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Walnut verneerd wood sets & hood fittings
1 151.913 1
151.954 1
136.838 1
136.910 1
2 159.609 1
3 234.156 1
234.157 1
4 134.892 1
5 134.996 1
6 234.158 1
7 234.153 1
234.154 1
234.155 1
8 155.051 1
155.052 1
155.055 1
155.053 1
155.054 1
155.056 1
134.976 1
9 165.495 2
165.934 2
10 137.737 2
163.341 2
11 134.988 1
134.894 1
134.990 1
12 152.005 2
13 136.555 1
136.620 1
14 171.108 2
©
V a n
APPLICATION
Full set wood, burr walnut finished
XK120 DHC LHD
XK120 FHC LHD
XK140 DHC LHD
XK140 FHC LHD
XK body dimentions do vary, so,
the above wood may need some trimming.
Central dash panel, burr walnut XK150
Wood set, cockpit crash roll
XK120 OTS
Wood set, cockpit crash roll
XK140 OTS
Pair front hood bow, wood
XK120-140 OTS
Front hood bow, wood
XK150 OTS
Rear tonneau wood tacking set
all DHC
Complete set hood wood, 15 pieces
XK120 DHC
XK140 DHC
XK150 DHC
Hood frame, XK120 OTS early
1948-June 1951
Hood frame, OTS late XK120 & 140
July 1951-on
Hood frame, OTS
XK150 OTS
Hood frame, DHC
XK120 DHC
Hood frame, DHC
XK140 DHC
Hood frame, DHC
XK150 DHC
Tonneau extension frame, not innustr. XK150 OTS
Pivot bolt, OTS
XK120-140
Pivot bolt, OTS
XK150
Chrome spacer
XK120-140
Chrome washer
XK150
Bar in rear of hood
XK120 OTS
Bar in rear of hood
XK140 OTS
Bar in rear of hood
XK150 OTS
“Teardrop” locating bar to body
all OTS
Rear window & frame
XK120-140 OTS
Rear window & frame
XK120 DHC
Spring, DHC frame
G e s t e l
XK140 FHC
B & C
ILL N° PART N° 15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
134.992
121.708
134.833
134.834
134.984
140.566
140.448
153.651
136.763
120.116
120.128
165.491
141.993
141.990
141.974
141.989
141.973
142.195
142.196
142.083
141.996
141.997
141.998
142.084
142.085
142.083
142.207
142.208
142.209
142.086
142.144
142.145
142.303
142.304
165.641
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
2
2
4
4
2
2
1
1
1
2
3
1
1
1
2
1
2
2
2
2
2
1
1
1
1
1
Front chrome strip, screw-on
Sealing rubber, hood/screen
Front strip, UNCHROMED
Rear upper strip, UNCHROMED Rear upper strip, UNCHROMED
Lower hood beading set, unchromed
Lower hood beading set, unchromed
Pair side screen frames, untrimmed
Pair side screen frames, untrimmed
Perspex for side screen
Perspex for side screen
Knob securing side screen to door
Escutcheon under knob
Outer clamp
Outer hook at windscreen pillar
Central clamp
Hook for central clamp
Pair clamps
Receiver plates
Hook for clamps
RH Side clamp
LH Side clamp
Central clamp
Outer adjusting plates
Central adjusting plate
Hook for clamps
Early style clamp, 3 hole fixing
Late style clamp, 4 hole fixing
Adjusting plates
Hold-down clamp
RH Hold-down clamp
LH Hold-down clamp
Pillar finisher kit & screws (6 plates)
Pillar finisher kit & screws (6 plates)
Wood trim screw kit: 40 pieces
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK120-140 OTS
XK120-140 OTS
XK120-140 DHC
XK120-140 DHC
XK150 DHC
XK120-140 DHC
XK150DHC
XK120 OTS
XK140 OTS
XK120 OTS
XK140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK120-140 OTS
XK150 OTS
XK150 OTS
XK120-140 DHC
XK120-140 DHC
XK120-140 DHC
XK120-140 DHC
XK120-140 DHC
XK120-140 DHC
XK150 DHC
XK150 DHC to Jan.’59
XK150 DHC from Jan.’59
XK150 DHC
XK120 DHC
XK140-150 DHC
XK140-150 DHC
XK120DHC
XK140DHC
73
Weather equipment - Hoods & tonneau covers
1 153.668 1
153.669 1
153.714 1
153.715 1
153.671 1
153.672 1
153.716 1
153.717 1
2 153.692 1
153.693 1
153.695 1
153.696 1
3 153.704 1
153.705 1
4 153.718 1
153.719 1
153.720 1
153.721 1
153.722 1
153.723 1
153.724 1
153.725 1
153.731 1
153.732 1
153.733 1
153.734 1
153.735 1
153.736 1
74
APPLICATION
XK120 OTS short, black hood, plastic window
XK120 OTS short, beige hood, plastic window
XK120 OTS short, black hood, your glass window
XK120 OTS short, beige hood, your glass window
XK120-140 OTS long, black hood, plasitc window
XK120-140 OTS long, beige hood, plastic window
XK120-140 OTS long, black hood, your glass window
XK120-140 OTS long, beige hood, your glass window
XK120 OTS short, black tonneau cover
XK120 OTS short, beige tonneau cover
XK120-140 OTS long, black tonneau cover
XK120-140 OTS long, beige tonneau vover
XK150 OTS Black tonneau extension
XK150 OTS Beige tonneau extension
XK120 DHC Black hood for grey headlining
XK120 DHC Beige hood for grey headlining
XK120 DHC Black hood for beige headlining
XK120 DHC Beige hood for beige headlining
XK120 DHC Black hood for fawn headlining
XK120 DHC Beige hood for fawn headlining
XK120 DHC Black hood for green headlining
XK120 DHC Beige hood for green headlining
Text of ill.n° 4 continues in next column
ILL N° PART N° 4
5
6
7
153.737
153.738
153.743
153.744
153.745
153.746
153.747
153.748
153.749
153.750
153.727
153.728
153.729
153.730
153.739
153.740
153.741
153.742
153.751
153.752
153.753
153.754
153.726
159.610
159.613
159.611
159.614
159.612
159.615
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
APPLICATION
XK120 DHC Grey headlining kit
XK120 DHC Beige headlining kit
XK120 DHC Fawn headlining kit
XK120 DHC Green headlining kit
XK140 DHC Fawn headlinging kit
XK150 DHC Fawn headlining kit
DHC Padding & webbing kit
XK120 DHC Black hood cover
XK120 DHC Beige hood cover
©
V a n
G e s t e l
159.891
Retrimming
service
for your
side screens
Please call for info
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
Complete trim kits & seat components
ILL N° PART N° APPLICATION
Our complete trim kits contains :
Complete trim panel kit, under dash panels, boot lid panel, re-trim kit for all the seats, the armrest,
handbrake cover, complete carpet set, boot carpets & panels, carpet fixing kit, trim panel fixing kit, cockpit
rail cover kit (XK120-140OTS),headlining kit (DHC-FHC). All components from our kits are made using
the original style material , leather were originally leather should be and vinyl or hardura were originally
these materials are used. Our kits are made in England to order. The part numbers below are guiding
you to a price indication , all original color combinations are possible. We require to know LHD or RHD ,
manual or automatic, 11 & 10 pleats or 9 & 9 pleats for XK120OTS, flat or round armrest for XK140, flat
or round front at seats for the XK140. Please note that seat foams, seat wood etc are NOT supplied in our
kits , these have to be ordered extra, if required.
1
©
158.317
158.318
158.319
158.320
158.321
158.322
158.323
158.324
158.325
158.326
158.327
158.328
V a n
1
1
1
1
1
1
1
1
1
1
1
1
Trim kit, XK120OTS curved back seat Trim kit, XK120OTS flat back seat Trim kit, XK120OTS curved back seat
Trim kit, XK120OTS flat back seat
Trim kit, XK120DHC
Trim kit, XK120FHC
Trim kit, XK140OTS
Trim kit, XK140DHC
Trim kit, XK140FHC
Trim kit, XK150OTS
Trim kit, XK150DHC
Trim kit, XK150FHC
G e s t e l
XK140 FHC
B & C
10 & 11 peats to 670184
9 & 9 peats to 670184
10 & 11 peats from 670185
9 & 9 peats from 670185
9 & 10 peats
9 & 10 peats
flat or round seat frame ?
flat or round seat frame ?
2
3
4
5
6
7
8
9
10
159.616
159.617
159.618
159.619
159.620
159.621
159.622
159.623
159.624
157.072
157.075
157.073
……….
……
……
165.493
165.492
134.857
134.876
137.770
142.171
142.172
171.093
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
2
2
4
1
1
2
Seat wood kit, curved type
Seat wood kit, flat back type
Seat wood kit, curved type
Seat wood kit, flat back type
Seat wood kit
Seat wood kit, front seats
Seat wood kit, front seats
Rear seat wood kit, flat at front side
Rear seat wood kit, round style
Pair seat cushion foams
Pair seat cushion foams
Pair seat backrest foams
Pair seat frames
Pair seat frames
Pair seat frames
Seat pivot bolt, chrome Seat pivot bolt, chrome
Seat runner set, without handle
Seat runner set, without handle
Tapping plate, seat runner to floor
RH Seat adjuster leverall
LH Seat adjuster lever
Return spring for seat adjuster lever
2 0 0 2
XK150 OTS
XK150 DHC
XK150 FHC
-S- Type 3.8cc
APPLICATION
XK120 OTS
XK120 OTS
XK120 DHC-FHC
XK120 DHC-FHC
XK140 OTS
XK140 DHC-FHC
XK150
XK140-150 DHC&FHC
XK140-150 DHC&FHC
XK120 & XK150
XK140
all
XK120
XK140
XK150
XK120-140
XK150
XK120 for one seat
XK140-150 for one seat
all
all
all
75
Miscellaneous items
15
20
6
21
1
7
16
8
22
9
23
24
17
2
18
10
19
3
11
ILL N° PART N° 4
13
5
14
76
QTY DESCRIPTION
1 141.945 1
2 141.857 1
3 141.946 1
4 142.188 1
141.947 1
5 142.200 1
6 141.011 1
141.012 1
7 122.072 2
8 141.951 2
9 141.070 2
10 141.192 2
11 141.852 2
12 141.950 2
13 141.844 2
14 142.307 1
142.306 1
15 142.109 1
142.137 2
16 141.067 1
17 142.305 1
18 141.985 1
19 142.180 1
20 159.478 1
159.488 1
21 139.405 2
22 137.870 2
23 137.872 1
24 159.625 1
159.626 1
25 159.511 2
12
25
APPLICATION
Interior mirror, long stem
Interior mirror, short stem
Interior mirror, adjustable stem
Interior mirror, non dipping, early
Interior mirror, dipping type, late
Interior mirror, roof fitting
RH Wing mirror, convex glass
LH Wing mirror, convex glass
Spare seal
Backplate “LUCAS” lettering
Sport type wing mirror, convex
Clamp-on mirror
Clamp-on mirror, round
Clamp-on mirror, long stem
Lightweight racing mirror
LH pillar mirror, no drilling required
RH pillar mirror, no drilling required
Ashtray, for dash top, chrome finish
Ashtray, for dash top, bronze finish
Ashtray, tunnel fitting
Replacement pull knob, chrome
replacement for wooden knob
Grap handle, dashboard
Grap handle, dashboard
Pair tinted perspex for sun visors
Pair tinted perspex for sun visors
Bracket sun visor, 3 hole base
Luggage tray lock
Pair catch plates
Pair LHD Glove boxes, green Pair RHD Glove boxes, green
Chrome carpet finisher strip
for XK120 must be cut to length
©
V a n
XK120 OTS
XK120 DHC-FHC
XK140
XK150 OTS-DHC
XK150 OTS-DHC
XK150 FHC
DHC-FHC
DHC-FHC
DHC-FHC
XK120-140 OTS
XK120-140 OTS
XK120
XK140
XK150 late
XK120-140 OTS
XK150 OTS-FHC
XK120 FHC
XK140 FHC
XK140OTS-DHC, XK150
XK140OTS-DHC, XK150
XK150
XK150
XK120-140 OTS
G e s t e l
B & C
2 0 0 2
XK120 OTS
XK120 DHC
XK120 FHC
XK140 OTS
XK140 DHC
I.D. plates, stickers, badges, etc...
5
2
6
3
7
4
1
8
12
9
10
15
11
13
22
16
14
24
17
25
19
20
18
33
34
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
©
QTY DESCRIPTION
APPLICATION
085.396 1 Chassis plate, brass
XK120-140
085.397 1 Chassis plate, aluminium
XK150
085.408 1 ‘Made in England’
all
085.352 2 ‘C Type’ Badge, rocker cover
085.026 1 ‘Caution’ Warning plate, heater
085.260 1 Battery sticker, gold/red
085.455 1 ‘Marston Excelsior Ltd’ plate
radiator I.D.
085.401 1 ‘Replica’ Plate, 132.6mph
early XK120
085.402 1 ‘Replica’ Plate, 141.51mph
late XK120-140
085.082 1 ‘Lucas’ Coil sticker
085.405 1 Run-in screen sticker
085.386 1 ’Trico’ washer bottle decal
085.385 1 AC Sticker, air cleaner, round type
085.172 1 AC Sticker, air cleaner, square type
085.074 2 Girling sticker, brake/clutch reservoir XK150
085.442 1 Fuse identification sticker
XK150
085.156 5 Dunlop sticker, for ‘D’ type wheels
085.413 1 Jaguar sticker, red on white accessory
085.357 1 Jaguar badge, 27mm
accessory
185.219 1 Union Jack on pin accessory
185.002 2 Union Jack badge, top quality
accessory
162.405 4 Screw, chrome
accessory
161.054 4 Nut
accessory
185.708 2 Union Jack with dummy screws
accessory
185.174 1 Union Jack , patch
accessory
185.712 1 Key-fob, brown leather, Jaguar
accessory
185.210 1 Key-fob, black leather, Union Jack
accessory
140.418 1 Universal badge bar
accessory
185.049 A/R Clamp, badge to badge bar
accessory
133.834 A/R Mounting plate, badge to clamp
accessory
185.154 1 GB Letters, chrome plated
accessory
085.096 1 Saint Christopher badge
accessory
085.158 1 Royal Automobile Club badge
accessory
081.561 1 Cable identification set
accessory
162.376 1 Screw & nut kit 14 pieces
152.034 1 Set of small rivets, I.D. plate fixing
10 pieces
V a n
G e s t e l
B & C
2 0 0 4
21
32
23
26
28
29
30
31
27
185.736 Green Jaguar umbrella
77
Part nr.
Part nr.
101.854
101.853
MONZA Oil filler cap
Part nr.
017.205
ASTON Oil filler cap
Special adaptor collar
2.1/2” diameter and chrome plated. To be 2.1/2” diameter and chrome plated. To be
used with the adaptor collar 017.205.
used with the adaptor collar 017.205.
For 2.1/2” Aston or Monza oil filler cap. This
collar has a double thread and will fit all XK’s
valve covers up to the XJ6 Series II. Once the
collar is fitted you can choose your own foil
filler cap design, either Monze or Aston.
Pair
reconditioned rocker covers
Composite head gasket
For long life and will hold high compression.
Should be fitted dry to skimmed head and block surface.
Highly polished and ready to fit.
Part nr.
Description
018.072
018.055
018.066
018.067
Early XK120
XK120-140
XK150 Electrical ref.
XK150 Manual ref.
Part nr.
Description
016.823 3.4 Composite head gasket
016.824 3.8 Composite head gasket
Part nr.
013.843
Pair reprofiled camshafts
for 3.4, 3.8 or 4.2cc engines.
Fast road specifications. These all round cams improves mild range.
Cam lift 380 or 9.67mm, duration degree 270 , timing 25/62 62/25,
Valve clearances IN 6 EX 8 (thou).
‘Metalastik’ high quality
engine mountings
• 013.844 Pair reprofiled camshafts
Part nr.
017.208
Vibration Damper
Part nr.
017.102
The finest available, full racing specification vibration damper.
A must for high RPM use or just for a smoother running engine.
for 3.4, 3.8, 4.2cc engines. Road competition, useable on road and
best with triple SU’s or Webers. Cam lift 426 or 10.82mm, duration
degrees 308, timing 52/76 76/52, Valve clearances IN 6 EX 8 (thou).
This is one of the most important improvements,
even for a fast road specification engine.
The picture below explains that by grinding a
lobe smaller, more lift can be achieved. By
reducing the base circle diameter, not only the
size of the lobe is reduced. When adjusting the
valve clearance, the cam follower sits closer
to the shaft and the levering of the lobe is
increasing, and thereby increasing the lift.
New lift
Old lift
Part nr.
018.056
Part nr.
Increase
in lift
017.209
Lightened, fully balanced flywheel
Sold on an exchange basis and drilled to accept both standard and 9.1/2”
diaphragm type clutch cover. This flywheel comes complete with a new 132
teeth ring gear fitted.
Heavy duty
valve spring set
These heavy duty springs eliminate float at high RPM will result in a
constant power delivery.
Part nr.
200.869
Tappet hold-down kit
Part nr.
200.839
Cam alignment tool
For XK six cylinder and V12 engines.
78
The tappets guides can work loose, especially
under the stress of high RPM or even just a lot of Km.
This guide hold-down kit is the prevention needed. Fitting
this kit is always less expensive that a loose tappet can
cost you. Only required for left side tappets.
©
V a n
G e s t e l
B & C
2 0 0 4
Oil cooler radiator, ½”BSP connections
Part nr.
011.917
Rear crankshaft
oil seal conversion kit
Part nr.
017.214
XK120 Front
crankshaft oil seal kit
Description
060.016 10 Row oil cooler
060.003 13 Row oil cooler
Part nr.
Very functional but the rear of the crankshaft has
to be ground to 75mm before fitting this kit.
Replacement oil seal 016.859
Including a template for timing cover
modification required.
Part nr.
XK140-150
High output oil pump
013.811
Part nr.
185.440
For maximum oil delivery. You will have
to improve the oil pick-up as well.
Part nr.
Description
013.810
013.808
XK140
Large pick-up pipe
XK150
Large pick up pipe
Oil cooler shroud
For cold mornings or when temperatures are getting low, do not
overcooling the oil and fit this shield or an oilstat (shown on this page).
Part nr.
185.622
Screw-on oil stat
80°C with professional ½”
BSP connections.
Oil cooler kit
For XK120-140
A big improvement, not only to keep the oil temp.
In control but this improved head has a better pressure
valve. The oil by-pass pipe has tobe
adapted to the sump. In order to do
this job correctly, we recommend
you use our tool & accessories
catalogue 190.058 and choose
a suitable adaptor.
For XK150
A complete bolt-on kit.
Part nr. Description
This kit is easier to fit
and doesn’t need
185.706 XK120 Oil cooler kit
modifications because
the XK150 already
had a return hose
fitted originally.
Part nr.
185.093
Push-on oil stat
80°C.
* Replacement oil filter use 017.113
XK Spin-on
oil filter
conversion
kit
Part nr.
Description
017.210 XK120
017.211 XK140
017.212 XK150
Sump guard
Part nr.
190.058
British parts, tools &
accessories catalogue
©
V a n
G e s t e l
B & C
2 0 0 4
011.050
Filter sold individually
Part nr.
Description
013.640
232.060
136.494
232.057
XK120 Steel sump guard
XK120 Aluminium sump guard
XK140-150 Steel sump guard
XK140-150 Aluminium sump guard
79
Cooling improvements
Part nr.
018.042
Bypass closing
thermostat
Part nr.
Part nr.
060.072
060.068
XK120 Aluminium radiator
Less weight and 20% more efficient cooling.
74°C. Any cooling problems?
Start checking if this type
thermostat is fitted. Once
the thermostat opens, it will
block the bypass and makes
sure allwater has to go
through the radiator.
Part nr.
XK140 Late alu radiator
Rib case top box.
For less weight and 20% more efficient cooling.
060.074
XK150 Alu radiator
For less weight and 20% more efficient cooling.
• 060.092 XK120 Alu radiator+Kenlow fan fitted.
The fan is screwed on brackets and the brackets are welded-on the radiator.
The sensor is fitted direct in the radiator and is held down with a clip.
The sensor is fitted direct in the radiator and is held down with a clip.
The sensor is fitted direct in the radiator and held down with a clip.
Other alu radiators Without fan With fitted fan
E type 3.8
E type Series 1 4.2
E type Series 2 4.2 man.
E type Series 3 manual
E type Series 3 autom.
MK2 3.8
MK2 other engine
060.115
060.116
060.117
060.118
060.119
060.120
060.139
060.133
060.134
060.135
060.136
060.137
060.138
060.140
Part nr.
061.446
Water expansion tank
Gives an extra water capacity, no more water loss and
this tank is easy to fit.
Part nr.
185.128
Kenlow Fan Kit
Part nr.
185.130
Fan switch radiator mounting
For customers who want to fit their own fan, but, would like
to take advantage of the very famous Kenlow adjustable
thermostat switch, we offer this switch on its own aswell.
Fits in front of the radiator and
has an automatic control. This
Kenlow fan kit has a 13” fan
and comes complete with an
adjustable thermostat switch.
Two fixing systems are
supplied in our
kits, you can
mount the fan on
aluminium brackets,
or, use the nylon straps to
fasten the fan direct to the
radiator core.
Part nr.
186.159
4 Liter Coolant for winter & summer
Three of these are required to fill-up an XK cooling system.
This coolant acts as an anti-freeze and protects
from corrosion. DO NOT USE
just water, it will damage
aluminium (cyl.head etc.).
Part nr.
198.044
Water Wetter
Part nr.
061.511
XK120 Uprated water pump kit
A slight modification on the timing cover is required to fit these uprated water pumps. The kit comes
complete with a special lower hose, new (XK140) pulley set, fan belt and a special 8 bladed fan.
Part nr.
061.512
XK1140-150 Uprated water pump kit
A slight modification on the timing cover is required to fit these uprated pumps. The kit comes
complete with a new lower hose and fitting instructions.
80
This super coolant helps
control overheating by
reducing surface tension
inside the radiator.
Your car can run up to
7° C cooler. Use only
one or two of these
bottles and the ‘Water
Wetter’ will do the job.
©
V a n
G e s t e l
B & C
2 0 0 4
Weber Carburettors
Please note that the inner wing has to be modified when you choose to Mount Weber carburettors.
This set-up may not be legal for street use, check Local rules before placing an order.
Part nr.
106.008
Short rampipe
Once fitted into the Weber the
pipe sticks-out 16mm. It is
important to have enough space
between the rampipe and the filter coverplate.
Weber carburettor
Part nr.
106.086
Part nr.
Trompet
socks,
air
filters,
6 required
Description
106.001 One weber, 45DCOE carb., 3 required
106.007 One weber, 40DCOE carb., 3 required
106.085
Fuel feed rail
Part nr.
106.002
Gasket
& O ring,
3 required
Weber inlet manifold & linkage kit
Part nr.
Part nr.
Description
106.082
106.081
106.083
106.084
For ‘B’ heads XK120-140-150 & MKII
For ‘Straight Port’ heads 3.8
For XK150’S’ only
For 4.2 engines
Part nr.
Spacer
grommet, 12 required
106.003
Part nr.
Part nr.
106.004
108.128
Cup
washer, 12 required
K&N Air filter assembly
Part nr.
Description
Triple SU air
cleaner box, without a filter
High flow filter element
Part nr.
330.070
101.195 45mm thick
101.441 63mm thick
Part nr.
108.522
Part nr.
200.572
Dashpot
damper
oil
Carburettor
synchronizer
tool
Facet Pumps
Earth
Positive +
Negative -
5 PSI 108.287 101.191
7.5 PSI -
108.209
Description
Part nr.
For 5 PSI pump
101.192 pair
For 7.5 PSI pump 108.541 pair
For 5 PSI pump
108.210 pair
For 7.5 PSI pump 108.542 pair
Adaptor for SU,
sold individually
Part nr.
K&N Air filter element only
Part nr.
Description
101.575 45mm thick
101.576 63mm thick
Description
200.682 1.3/4” SU
200.683 2” SU
Part nr.
200.679
One pair ‘Midlock’
synchro testers
Part nr.
102.302
Three
piece tool kit, SU
2” Sandcast
‘C’ Type carb.
See page 27
For more information
also see our British Parts
& Accessories catalogue
©
V a n
G e s t e l
B & C
2 0 0 4
Part nr.
Part nr.
Part nr.
Part nr.
190.225
190.586
190.428
190.416
81
Asbestos free heat reduction products
100% asbestos free
Part nr.
159.405
Heat screen
100cm x 90cm
Designed with many uses in mind. Heat Screen is capable of withstanding
direct heat up to 500 C° on one side, while protecting against radiant
temperatures up to 1000 C°
on the aluminised side.
Part nr.
159.404
Exhaust wrap
5cm wide by 1500 cm long.
Reduces the engine bay temperature by up to 45%.
This temperature reduction gives cooler intake air
and reduces the chances of premature failure on costly engine
components due to thermal deterioration. 100% free of asbestos.
Part nr.
172.076
Strap
Handy strap for securing the wrap around tubes
and small parts.
Part nr.
159.408
Heat shroud
90cm long and covers from 2 to 3cm wire or hose.
A fast and efficient solution for hoses, lines and tubes. Easy to use and install,
the heat shroud utilizes a full length hook and loop material as a closure.
Can be cut to length with a sharp knife.
Part nr.
159.406
Versa shield
60 x 18 cm
Universal heat shield to
protect starter motors, carburettors,
electrical parts, fuel pumps etc..
from heat. Can be cut to shape and
secures itself using the velcro provided.
82
Part nr.
159.407
Cool-tape
3.5cm x 450cm
Used for wrapping wires, small relay's, hoses etc..
in the engine bay. Very strong adhesive.
100% asbestos free
©
V a n
G e s t e l
B & C
2 0 0 4
Gearbox 5 speed conversion kits
5 speed conversion kit
Part nr.
020.218
XK120 Getrag conversion kit
Bolts direct to the original bellhousing. The kit comes complete with a propshaft,
speedo cable adaptor piece and a completely rebuilt 5 speed gearbox.
The chassis has to be modified for the rear mounting,
but this isn’t a complicated job.
It may be possible that you have to modify
the length of the propshaft especially
for early cars.
Part nr.
020.219
XK140-150 Getrag conversion kit.
Bolts direct to the original bellhousing. This kit comes complete with
a propshaft, speedo cable adaptor piece and a completely rebuilt 5 speed gearbox.
Formula Power, silicone high tension lead set
Part nr.
Description
181.064
181.065
Early style with straight
end caps at spark plug
Late style with 90°
end caps at spark plug
Super lead set, originally
developed for race.
Minimum loss and
greatly extended cable life.
Spiral magnetic 4 core 10mm blue
silicon extreme heat resistance. Can also
be fitted to a much more powerful coil if needed
Part nr.
185.743
Aluminium spacer block
Spark plug wire holder, made from solid aluminium
Optronic
ignition system
Part nr.
Description
081.988 Jag XK 120-140 positive earth
081.989 Jag XK 120-140 negative earth
Originally for
Negative earthed
cars, ask for wiring
info with positive
earthed cars.
Lumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally fitted with
mechanical distributors using contact points. The advantage of the Lumenition system is that it contains no
wearing parts, requires no adjustment or maintenance during service and once ignition timing is set it will
remain permanently tuned. The engine will start better, last longer and run more
economically through improved
efficiency. There are only three
components, very
compact and
simple to fit.
Part nr.
Part nr.
086.082
086.462
Power supply module
Ask your local
Anglo Parts shop for
more information
©
V a n
G e s t e l
B & C
2 0 0 4
See also
page 50
System with
mechanical
distributor and
contact points.
Fitting kit for distributor
Lumenition,
no wearing
parts & always
perfect timing.
83
Suspension improvements, starter motor & alternator kit
Part nr.
XK140-150
Power steering conversion kit for LHD cars
043.861
Jaguar based LHD steering rack with electrical pump and includes an alternator needed.
For XK 120 you will need to weld brackets 043.862 and have to obtain an XK140 OTS
steering column or other later Jaguar columns. These kits have to be installed
by a professional workshop.
Front shock absorbers
Spax or Koni
Part nr.
045.112
* two required
Uprated anti-roll bar
for fast roads and rally cars
Rear Conversion
Part nr.
* two required
Description
045.056*
045.057*
045.057*
042.836*
042.837*
042.839*
XK120 SPAX Front shock
XK120 KONI Front shock
XK120 Pin & bushing
improved type and oversize
Description
042.838* KONI Rear shock
045.058* SPAX Rear shock
Part nr.
Part nr.
045.165
XK120 Conversion bracket kit
This upgraded pin & bush has a sealed
ball joint riding in a nylon cup
Upper plates need welding to chassis.
Part nr.
Description
043.839 23.2mm out. dia. (standard)
043.840 25.4mm out. dia. Made to suit
worn out steering arms
XK
Lightweight starter motor
For 150% more cranking power and draws 50% less current.
Straight fit for both negative or positive earth systems.
Part nr.
Description
082.155 All XK Manual gearbox
082.170 XK140-150 Automatic transmission
84
Polyurethane
bushes see
page 40
Alternator kit
Part nr.
Description
082.153 XK120 negative earth
082.154 XK140-150 negative earth
©
V a n
G e s t e l
B & C
2 0 0 4
Improved braking
Part nr.
050.506
Part nr.
Front Disc brake conversion kit, wire wheel cars
050.359
Part nr.
050.329
Front Disc brake conversion kit, disc wheel cars
For XK120-140 disc wheel cars. This superior upgrade system is most efficient and is based on
12.733 brake discs ( approved for classic rallying ) and 3 pot brake calipers.
This kit is complete with stainless steel braided brake hoses, “Green Stuff”
brake pads
and all
hardware
required.
For XK120-140 wire wheel cars. This superior upgrade system is most
efficient and is based on 12.7mm brake discs ( approved for
classic rallying ) and 3 pot brake callipers. The kit is
complete with stainless steel braided brake hoses,
‘Green Stuff’
brake pads
and all
hardware
required.
Part nr.
Front XK150 3 Pot conversion kit
050.360
Front XK150 4 Pot conversion kit
A 100% improvement compared with the original Dunlop system. The kit includes:
rebuild 3 pot calipers, 12.7mm thick improved brake discs,
‘Green Stuff’ brake pads and securing clips.
LHD Brake pedal + pump
Part nr.
Description
050.508 XK120 LHD
050.509 XK140-150 LHD
Part nr.
050.361
Improved brake disc
Part nr.
053.082
12.7mm as used in our kits. Sold individually
Brand new Lockheed servo unit
For in line installation. Servo hose, connections and nonreturn valve are shown in Our British Parts catalogue
‘190.058’ page 54.
Part nr.
1 L.
DOT4 Lockheed
brake fluid
053.039
Part nr.
053.271
XK120 Tandem
Master Cylinder
Part nr.
053.306
Part nr.
Pin and clip kit • For 3 Pot callipers
3 pot brake calliper rebuild
Description
050.338 RH side
050.339 LH side
©
V a n
053.176
For 3 Pot callipers. For road and
competition use, these pads have
20% more grip and don’t give black dust.
052.829
Part nr.
Part nr.
‘Green Stuff’
Brake pad set
G e s t e l
B & C
2 0 0 4
Easy bleed kit
Makes brake bleeding a one person job.
Brake fluid can get out, but air can’t get in !
Part nr.
‘Green Stuff’
Square brake pads
053.495
For Dunlop callipers. For road and
competition use, these
pads have
20% more
grip and
don’t give
black dust.
Part nr.
1 Litre
Silicone brake fluid.
053.018
For other small fittings, see also
British Parts & Accessories catalogue p 54
85
Body modification, seats & steering wheels
Part nr.
185.017
One Aeroscreen
with laminated safety glass
Part nr.
Aerocreen cowl
Aluminium
mirror cowl, LHD cars
136.518
Part nr.
Description
136.783 RH Aeroscreen cowl & brackets
136.784 LH Aeroscreen cowl & brackets
Part nr.
185.729
Part nr.
185.728
Le Mans type bonnet strap with dual buckle, XK120-140
Le Mans type bonnet strap with single buckle, XK120-140
Tilting bucket seat
Strongly made with
reinforced edges.
For easy access to the
battery areas or use of
hoodframes.
Sold individually
and not trimmed.
Part nr.
158.329
Pair trimmed
bucket seats
These are leather trimmed to
order and we can easily combine
our trim kits with these seats. The base
is made from strong reinforced fibreglass.
If you require tilting this seat we recommend to fit MG
Type seat sides to the seat frame.
Part nr.
Part nr.
138.400 Aluminium tilting
138.635 Steel tilting
Moto-Lita steering wheels
XK120
16”/40 cm original style steering wheel
045.031
T his steering wheel looks exactly as original but is smaller.
The smaller steering wheel will make it easier getting in and out
your sports car. Before ordering, please ask the delivering
time becouse the wheels are made in limited productions
Part nr.
Description
185.694
185.693
185.696
185.695
XK120 to accept original horn control system
XK120 Moto-Lita centre cap
XK140-150 to accept original horn control system
XK140-150 Moto-Lita centre cap
Classic four spoke
Part nr.
Size
185.689 35CM
185.690 37CM
86
Description
MK3 Wood rim
Part nr.
MK3 Leather
Size
Part nr.
185.026 35CM
185.027 37CM
Size
185.156 35CM
185.157 37CM
©
V a n
G e s t e l
B & C
2 0 0 4
Wheels - Special
Part nr.
XK Competition wheel
047.100
16” Protection band
Part nr.
Luster
Lace, metal polish
198.050
Part nr.
This is the best way to polish your chrome and stainless steel metal.
It’s so simple and effective. The polish is in the cloth that you wrap around your
chrome wheels etc. Test this very simple way of polishing and you’ll be astounded!
‘D’ type Wheel 15”x 6”
Part nr.
Description
046.165
046.164
XK120 Drum brake car. Long central hub
Machine 4MM from drum edge
XK140-150 Disc brake & E-Type
Short central hub
046.151
Tubeless 16”x6” 72 spoke
Part nr.
085.156
Sticker ‘Dunlop’
Part nr.
186.034
Copper grease
With wire wheels your hubs and spinners
get very hot.
Normal grease
becomes liquid
and disappears,
causing them to
get stuck with risk
of damage.
This copper grease
withstands these
high temperatures
and makes it easy to
remove spinners.
Part nr.
042.221
Remover tool
for 52MM federal
Part nr.
Part nr.
042.217 RH ‘Jaguar’ federal
042.218 LH ‘Jaguar’ federal
042.097
Hammer,
copper/rawhide
1.15Kgr.
©
V a n
Description
Part nr.
Description
Part nr.
Description
045.115
045.116
045.113
045.114
RH 3 eared ‘Jaguar’ LH 3 eared ‘Jaguar’
RH 3 eared plain
LH 3 eared plain
042.211
042.212
042.215
042.216
RH 2 eared ‘Jaguar’ LH 2 eared ‘Jaguar’
RH 2 eared plain
LH 2 eared plain
G e s t e l
B & C
2 0 0 4
87
Car covers, Pewter models & Jaguar cap
Car covers Moltex
Part nr.
159.517
Moltex car covers are made from
strong lightweight breathable waterproof material.
Whether you are looking for an in-door car cover,
or a way to keep the sun off your car during the
day, or an all season outdoor car cover, a Moltex car
cover is the best solution. These universal car covers
come with a stowage bag and two elasticated ropes
with four hooks to keep the cover securely in place.
Make sure the cover doesn’t move because of wind.
Tighten with additional ropes or elastic to avoid
the car cover making matt areas through friction!
Part nr.
159.343
Indoor delux car cover, illustrated
Custom made car cover. Made from thick acrylic-cotton fleece. This car cover is
very soft inside and elasticated to ensure a perfect fit. Green with yellow piping.
For indoor use only. Comes with stowage bag.
Part nr.
159.519
Universal green indoor car cover,
not illustrated
ade from 100% pure cotton, the inside has been brushed to give
a soft flannel appearance. Although the material has been pre-washed,
we recommend washing in cold water and soft soap. Will fit AH, TR3-6,
MGB, MGC and other sportscars up to 410cm long
Pewter models & cap
Part nr.
195.209
‘C’ Type model
Part nr.
185.674
Jaguar
cap
Part nr.
195.208
XK150 model
Part nr.
195.206
XK120 model
88
©
V a n
G e s t e l
B & C
2 0 0 4
Auto Glym & body care products
AUTOGLYM
Simply
outs tanding
Part nr.
198.019
Part nr.
Black tyre paint
185.046
Connolly
hide care only
Part°
Description
198.005
198.008
198.007
198.011
198.006
198.031
198.009
198.012
198.035
198.013
198.010
198.014
198.003
198.033
198.039
198.057
480ml car shampoo & conditioner
Cutting polish for badly damaged paint
Super resign polish
Extra gloss protection
Clean wheels
Instant tyre dressing
Bumper care (rubber)
Glass protection
Fast glass cleaner (spray)
Interior shampoo
Vinyl & rubber care
Instant tar remover
Chrome polish (tube 75gr.)
8 x polishing clothes
Leather care
Engine cleaner
Use this at least
once a year
Part nr.
198.061
Autoglym
gift pack
Part nr.
185.551
Connolly
hide care kit
For cleaning and preserving hides,
upholstery and all leather clothing
Part nr.
198.060
Hydra blade
Effortless removal of shampoo rinse water
Part nr.
185.343
Renovo soft top
cleaning products
Part°
Description
198.063
198.064
198.065
198.066
198.067
198.068
Plastic window polish
Vinyl (pvc) soft top cleaner
Canvas (fabric) soft top cleaner
Vinyl (pvc) soft top ultra proofer
Canvas (fabric) soft top ultra proofer
Canvas (fabric) black reviver
Part nr.
185.334
This excellent product is specially formulated
for soft tops. First use cleaner and then the
proofer. For canvas soft tops
the black reviver should
be used before
the ultra proofer.
V a n
G e s t e l
B & C
Perfect for washing
your classical
Part nr.
185.351
Car duster
This 100% cotton dusting
mop has been treated to trap dust.
Shake out and it’s ready to use again.
DO NOT WASH OUT
Chamois
We offer only the best real natural
chamois. These are specially
made for the car industry
having larger dimensions
than most and are
thick and very soft.
Approx. 40 x 62cm.
Made in England
of course.
©
Car wash
handshoe
2 0 0 4
Part nr.
185.335
Proffesional wringer
Heavy duty industrial quality
wringer for chamois, towels etc.
Specifications: Rustproof steel frame, maintenance free
rollers and bearings, adjustable pressure over the entire
length of the rollers for uniform water removal. The complete
wringer machine has two strong clamps for easy attaching
89
Practical Accessories and safety products
Part nr.
132.646
Oil drip pan
Is useful to put under your lawn-mower, British bike
or even under your Classic car (1200 x 640 mm)
Part nr.
185.790
KRYPTONITE automotive security
• 5 years warranty • Steel reinforced keyway • Hardened steel resists prying,
freezing, saws, bolt cutters • Protective vinyl coating • Pick and drill-resistant
lock mechanism • Easy to use • Complete instructions and key registration
(info inside packing)
Part nr.
086.604
Part nr.
185.332
Automatic battery
conditioner & tester
Fire extinguisher
‘E‘ Approved, 1 Kgr dry chemical fire extinguisher. We hope you will
never have to use it, but, just in case, have it with you.
Part nr.
• Automatically recharges used battery cells • Suitable for all vehicle types: cars,
motorbike, boats, caravans... • Unique testing facility allowing ‘easy chek’ on
battery capability and condition• L.E.D. monitoring display system/battery status
display • Permanent unsupervised use. Polarity warning signal • Dimensions:
5X6X10cm, easy storage • Charges every 12 Volt battery with a minimum of
13.2 Volts input can go up to a maximum of 13.8 Volts.
198.044
Water
wetter
This super coolant
helps control
overheating.
Your car can
run up to 7°C.
cooler. 355 ml.
90
Part nr.
083.174
Battery
switch
with removable
red key
©
V a n
G e s t e l
B & C
2 0 0 4
Lead replacement lubricants
Part nr.
198.042
VSP PLUS
Lead substitute &
octane booster
To be added to unleaded fuel
as a replacement for 4 star
leaded petrol.
Most pre-1990 or classic cars
have soft 4 valve seats in the
engine wich means they cannot
run on unleaded petrol without
risking severe valve seat wear
which could lead to further
significant engine damage.
VSP PLUS uses advanced
Manganese technology which:
• protects against valve
seat recession
• Boosts octane of unleaded
petrol typically back to
4 old star leaded levels
• removes the need to retard the ignition
• prevents pinking when using unleaded fuel
• tests on U.K. refinery fuels confirm an average increase
of 2 octane numbers when added to unleaded fuel
Part nr.
198.058
Competition
Valve Lubricant
For competition ONLY!
A truly effective lead replacement
valve lubricant for use in unleaded
petrol under race conditions.
Most classic racing cars (single seaters,
sports cars or racing saloons) need the
protection of lead for valve lubricant
to prevent exhaust valve recession.
This means it is not advisable to run
these race tuned cars on unleaded
petrol without risking severe valve
seat wear which will destroy the
engine. CVL uses proven, advanced
fuel additive technology to prevent
valve seat recession under high engine
loads, experienced in race conditions.
©
V a n
G e s t e l
B & C
2 0 0 4
Part nr.
198.059
Valvemaster Plus
Castrol valvemaster is a phosphorous
based additive to enable you to use
unleaded petrol in your classic car
without modifying the soft valve
seats in the engine.
The formulation has a long history of use
as a lead replacement additive in North and
South America,Australia, New Zealand and
Europe. Castrol Valvemaster is endorsed by
the Federation of British Historic Vehicle
Clubs (FBHVC) following the tests developed
by that independant body. Castrol are
confident that it can be used under all driving
conditions and that it is compatible with both
LRP and leaded fuel. Supplied in 250ml bottles,
with a built in measuring device. 10ml treats
10 litres of unleaded giving you the flexibility
to fill up with varying quantities of fuel.
Castrol Valvemaster Plus has the addition of an
octane booster to reduce pinking or knocking in
tuned or high compression engines without the need to retune.
• 250ml treats 250 litres of unleaded fuel • Ultimate protection
against valve seat recession • Provides an octane boost to unleaded
fuel, reducing knocking • Protects engine under all driving conditions •
Reduces the need to re-tune • Keeps the fuel system clean and provides
excellent corrosion protection
91
Rally instruments, tripmasters & warning lights
Part nr.
Part nr.
088.089
088.090
Baseplate
2 counters
Baseplate
1 counter
“Hanhart” Rally chrono instruments
Part nr.
088.091
Clip
Part nr.
088.087
Mechanical
hour counter
Part nr.
088.088
Mechanical
Minute counter
excellent chrono instruments with the following specifications:
(088.087) hour counter with 1/5 second recorder, 60 min. register,+ 10 hour, 60 second sweep,
jumping minute hand, pinlever, shock protected, 11 jewels, unbreakable spring, brass alloy case.
(088.088) minute counter with 1/5 second recorder, 60 min. register with coloured minute dial,
60 second sweep, flyback to zero and simultaneously restart, jumping minute hand, shock protected
and extended dust and water resistance, 7 jewels, brass alloy case.
Part nr.
088.092
Belmogtwin ‘R’
A strong, reliable and fully mechanical
odometer with two counters.
Registers hundreds of a km or
a mile. allowed for F.I.V.A & F.I.A.
classic events. 5 mm digits are
illuminated by a light and enlarged by
magnifying lenses.Available in 6v
and 12v. Instantaneous zero setting.
Setting knob for addition, neutral and
substracting. Figure counter control and
setting can be carried out for both counters.
Adjustment gear for very accurate calibration.
Supplied complete with fitting T-gear, drive
cable and circlips.
Part nr.
083.815
Retro Trip
The precision
distance recorder.
Approved by many historic rallys. Easy calibration in miles & meters.
Part nr.
086.405
Belmogtwin MK II
Fully mechanical distance
The perfect trip master for
professionals and amateurs.
recorder
Approved for rallying & racing.
With handle to control the
counting; forwards,
backwards or stop.
Special knob to get back on
track when a mistake
is made, also a knob
to temporarily stop
recording when leaving the track
for the loo etc. After installation the
distance recorder will need calibrating to your car’s
specifications . This can be achieved by testing the distance over
1 km, and noting the difference on the recorder. The recorder must then
be returned for fine tuning.
Part nr.
086.782
Battery switch
FIA approved
Warning lights
Two & three hole mounting plates
Period reproduction mounting plates
Our mounting plates for warning lights & switches are made from polished stainless steel.
The lights & switches are easily installed as the holes are also the sleeves. The holes have a
diameter of 1/2”, there are also holes in
Part nr.
the top for mounting under
the dashboard.
135.755
Part nr.
Description
083.159
083.477
086.187
086.370
Green lens
Red lens
Amber lens
Blue lens
Warning lights
available in
four colours
These warning lights
have been specially chosen
to suit British dashboards &
fit in our mountng plates. Each light
contains a bulb and two lucar terminals
(earth & power).
Two hole mounting plate
Part nr.
135.756
Three hole mounting plate
92
Part nr.
Part nr.
083.088
083.084
Lighting switch
On-Off switch
Three positions: off,
side light & head light
Please note to use relays
from 50 watts onwards.
©
V a n
G e s t e l
B & C
2 0 0 4
Boot locks/door handle sets & Jaguar mascotte
Part nr.
141.870
Jaguar XK120 full handle set
Complete with boot handle, paired handles and
replacement ignition barrel, all keys matched
Part nr.
Part nr.
141.873
141.866
Jaguar
XK120
Locking boot handle
7” Long leaping Jaguar
Supplied complete with special shaft and 2 keys
Part nr.
141.874
Part nr.
141.875
Part nr.
141.876
Part nr.
141.877
Part nr.
142.141
Set, XK120 open-top models
Comprising boot, ignition and petrol flap lock
matched keys
Full set, XK120 coupé models
Comprising 2 door barrels boot, ignition and petrol
flap lock matched keys
Set XK140 Open-top models
Comprising boot, ignition and petrol flap lock, matched keys
Full set, XK140 FHC and all XK150
Comprising 2 door barrels, boot, ignition and petrol flap lock,
matched keys
XK140 DHC
Doors, ignition, boot & petrol
©
V a n
Top quality, British made.
Originally fitted to XK150 (Optional) and MK VIII, IX.
Use 1/4” screw 162.555 for fixing this beautiful mascot.
G e s t e l
B & C
2 0 0 4
Part nr.
141.880
Cubby box lock,
dead-bolt type
Suits various older models including
Jaguar MKII, MKX, XK 140 etc...
93
“Original series” books and Digital manuals
Part nr.
Part nr.
190.560
190.561
Original
Jaguar XK
Original
Jaguar E-Type
(by Philip Porter)
A complete new edition of a
best-selling book first published
in 1988. New research has given
us much more knowledge of these
immortal sports cars. Eight XK experts
have read it and offered additions.
Hardback, 295 X 225 MM, 144 pages
with 250 colour pictures
(by Philip Porter)
Here is the evidence of what constitutes an
authentic Jaguar E-Type, whether Roadster,
coupé or 2+2, from early 3.8 litre to late
5.3 litre V12, featuring twelve cars either
in remarkable original condition or restored
with fastidious attention to originality.
Hardback, 295 X 225 MM,
96 pages with 160 colour pictures
Part nr.
Part nr.
190.540
190.562
Original
Jaguar XJ
Original
Jaguar MKI, MKII
(by Nigel Thorley)
The Jaguar MKI, MKII range encompassed
2.4 and 3.4 litre Mark 1 saloons, 2.4,
3.4 and 3.8 litre Mark 2, 240 and 340,
Daimler V8 2.1.2 litre and V8 250, all
difficult and costly cars to restore, making
it essential to get it right first time.
Hardback, 295 X 225 MM,
(by Nigel Thorley)
A detailed production history of the
6-cylinder and V12 Jaguar and Daimler XJ
models. The evolution of this large range
is described, with details of differences
between models, production changes,
etc.., and specially commissioned colour
photographs. Hardback, 295 X 225 MM,
Jaguar Classic Parts Original edition publications
CD Rom Range
Description & contents
Part nr
Parts & Service Publications
Jaguar Saloons 1936-1970
• SS and Jaguar Saloons - 1936 to 1948
• MKI & II incl. 240 & 340 - 1955 to 1969
• MK X, 420G, S-type & 420 - 1961 to 1970
192.027
192.028
192.029
XJ Saloons 1969-1992
• XJ6 & Daimler Sovereign Series 1 & 2 - 1968 to 1979
• XJ12 & Daimler Double-six Series 1 & 2 - 1972 to 1979
• XJ6 & Daimler Sovereign Series 3 - 1979 to 1987
• XJ12 & Daimler Double-six Series 3 - 1979 to 1992
192.030
192.031
192.032
192.033
Jaguar sports cars 1948-1994 (except XJS)
• XK120, 140, 150 & 150 ‘S’ - 1948 to 1961
• E-type Series 1 & 2 - 1961 to 1970
• E-type Series 3 - 1971 to 1974
• XJ220 - 1991 to 1994
192.034
192.035
192.036
192.037
XJS sports cars 1975-1996
• XJ-S 5.3 Litre - 1975 to 1991
• XJ-S 3.6 Litre - 1982 to 1991
• XJS 4.0 Litre - 1991to1996
• XJS 6.0 Litre - 1992 to 1996
• XJR (XJ40) & XJR-S (XJ-S) - 1988 to 1993
192.038
192.040
192.039
192.041
192.042
XJ6 (XJ40) & XJ12 (XJ81) 1987 to 1994
• XJ6 (XJ40) 2.9 Litre - 1987 to 1990
• XJ6 (XJ40) 3.6 Litre - 1987 to 1989
• XJ6 (XJ40) 3.2 Litre - 1991 to 1994
• XJ6 (XJ40) 4.0 Litre - 1990 to 1994
• XJ12 (XJ81) 6.0 Litre - 1993.25 to 1194
192.043
192.044
192.045
192.046
192.047
XJ6 (X300) & XJ12 (X300) 1995 to 1997
• XJ6 (X300) 4.0 Litre - 1995 to 1997
• XJ6 (X300) 3.2 Litre - 1995 to 1997
• XJR (X300) 4.0 litre Supercharged - 1995 to 1997
• XJ12 (X300) 6.0 Litre - 1995 to 1997
192.048
192.049
192.050
192.051
Daimler Models 1953 to 1992
• Daimler V8: 250 and SP250 (Dart) - 1956 to 1969
• Daimler Conquest, Century, Majestic &
Majestic Major - 1953 to 1968
• Damler DS420 Limousine - 1968 to 1992
94
Description & contents
Part nr
Supplementary Model & Service Information
• Jaguar & Daimler models (excl. XJ Saloons) - 1930 to 1974
• XJ6 & XJ12 Series 1, 2 & 3 - 1968 to 1992
• XJS - 1975 to 1996
• XJ6 (XJ40) & XJ12 (XJ81) - 1987 to 1994
• XJ6 (X300) & XJ12 (X300) - 1995 to 1997
• XJ8 & XJR - 1998 to 2002
• XK8 & XKR - 1997 to 2003
192.055
192.056
192.057
192.058
192.059
192.060
192.061
Parts & Service Bulletins
• Volume 1: parts 1959 to ‘68, service 1946 to ‘68
192.062
192.063
192.064
System Diagrams & Electrical Data
• Volume 1: Jaguar & SS Saloons - 1933 to 1992 (except XJ40) 192.065
Jaguar Sports cars - 1948 to 1974 & Daimler Variants
• Volume 2: Jaguar Sports cars - 1975 to 2004,
192.066
Jaguar Saloons - 1988 to 2002 (except XJ12 Series 3)
Owners Literature
• Volume 1: Jaguar & SS Saloons - 1933 to 1992 (except XJ40) 192.067
Jaguar Sports cars - 1948 to 1974 & Daimler Variants
• Volume 2: Jaguar Sports cars - 1975 to 2004,
192.068
Jaguar Saloons - 1987 to 2002 (except XJ12 Series 3)
This market leading, cost-effective range of electronically
published technical information - few manufacturers other
than Jaguar come close to providing the owner with such a
comprehensive back-catalogue of manuals and documents
- may be subdivided into three complementary subject
groups: Parts and Service Publications, Supplementary
Model and Service Information and Parts and Service
Bulletins.
Historically, significant amounts of valuable service
information were never incorporated into updated service
manuals, and only by also studying the supplementary
information and bulletin CDs can these information gaps
be bridged. One example of this is the non-appearance of
the AJ16 engine in XJS service manuals; another is the
dividing out of electrical and electronic information for the
increasingly complex later models into guides published
separately from the service manuals.
It is therefore highly recommended that owners seek to
acquire CDs covering all three of the aforementioned
subjects to ensure they have as much information as
necessary to effectively service their Jaguar or Daimler
motor car.
192.052
192.053
192.054
©
V a n
G e s t e l
B & C
2 0 0 4
Factory workshop manuals
190.564 Jaguar XK 120, 140, 150, 150S & MK VII, VIII & IX
Official service manual 190.622 Jaguar MK II Official Service Manual
Massive publication compiled from 9 different previous official manuals,
784 pages, photos, drawings, wiring diagrams etc.., softbound
190.623
Information on maintenance , repair and servicing procedure,
364 pages, fully illustrated, softbound
Jaguar MK X (3.8 & 4.2) and 420G
Official service manual 4th. edition covering all 2.4, 3.4, 3.8, 240 & 340 models,
545 pages, drawings, softbound
190.624 Jaguar S-Type, 3.4, 3.8 Workshop Maual Repair and service procedures for all components,
280 pages, fully illustrated with drawings, softbound
190.625 Official Service Manual for Jaguar Automatic Transmission
Part 1 covers original transmission as fitted to the MK VII model, with supplement covering changes to MK VII & other later models up to MK X, but in all essential
details applies to other auto transmission units, i.e. 2.4, 3.4, 3.8, XK 140, XK 150,
MK VIII & MK IX. 154 pages, photos etc.., softbound
190.626
Jaguar E-Type 3.8 & 4.2 Series 1 & 2 Official Service Manual
Huge combined volume covering all components in detail
Approx. 800pages, photos, drawings, softbound
190.627 Jaguar E-Type V12 Series 3 Official Service Manual Huge combined volume covering all components in detail
Approx. 800pages, photos, drawings, softbound
190.628
200 pages, illustrated with photographs, charts & diagrams, softbound
Jaguar 420 Official Service Manual 190.629 Jaguar XJ6 Series 1, 2.8 & 4.2 litre
Includes routine maintenance, spe’s and full repair and service procedures for all Official Service Manual components. 570 pages, photos, drawings, softbound
190.630 Jaguar XJ6 Series 2 Official Service Manual
Information on maintenance, repair and servicing procedures
398 pages, illustrated with wiring diagrams, softbound
190.631 Jaguar XJ12 Series 1 Official Repair Operation Manual
All repair and service procedures are covered in detail
450 pages, drawings, diagrams, softbound
190.632
Detailed specs., repair and maintenance instructions, 360 pages, drawings, softbound
Jaguar XJ12 Series 2 Official Repair Operation Manual
190.633 Jaguar XJ6/XJ12 Series 3 Official Service Manual
Maintenance and repair of all components, in immense detail
190.634 Jaguar XJ6 (XJ40) Owners Workshop Manual Covers all 2.9, 3.2, 3.6, and 4.0 litre Jaguar & Daimler saloons from1986 to 1994
190 pages, fully comprehensive with over 280 ill., plus fold-out wiring diagrams & full specs. softbound
190.635 Jaguar XJ-S 3.6 & 4.0 Official Service Manual
This manual covers all 6-cylinder powered XJS models - XJS 3.6, XJSC 3.6 and 4.0
The supplement covers later vehicles, mainly dealing with those modifications
brought about in line with the introduction or automatic transmission, 4 litre engine and related systems, ABS brake systems, body modifications and more
648 pages with many illustrations, softbound
190.636 Jaguar XJS Official Repair Operation Manual
Comprehensive instructions covering all components, with new 168 page 6.0 litre incorporating HE, 5.3 & 6.0 litre supplements. Softbound.
©
V a n
G e s t e l
B & C
2 0 0 4
95
Factory parts catalogues
190.637
Jaguar Mark 2, 3.4, 3.8 & 340 Official Spare Parts Catalogue
All parts identified and numbered and many illustrated
514 pages, drawings, hardbound
190.638 Jaguar S-Type Parts Catalogue Covers 3.4 & 3.8 models
190.639 Jaguar 3.8 E-Type Official Spare Parts Catalogue Covers 3.8 litre open and FHC models
334 pages, fully illustrated with drawings & diagrams, softbound
190.640
Jaguar E-Type Series 1, 4.2 litre Official Parts Catalogue
190.641 Jaguar E-Type Series 2 Official Parts Catalogue Covers Fixed Head Coupé, 2+2 models Contains illustrations from parts catalogue J37 & J38. 296 pages softbound
190.642
Jaguar E-Type V12 Series 3 Open 2 Seater Official Parts Catalogue
All parts illustrated and numbered
190.643
Jaguar XJ6 Series 1 Official Parts Catalogue 186 pages, exploded views etc.., softbound
190.644
Jaguar XJ6 Series 2 Official Parts Catalogue Approx. 400 pages with drawings etc.., softbound
190.406
Jaguar XJ6 & Daimler Sovereign Series 3 Parts Catalogue
Covers models up to August 1985 inc. Daimler Sovereign
354 pages, many drawings, diagrams, softbound
190.472
Jaguar XJ12 Parts Catalogue
249 pages, factory drawings, softbound
190.645 Jaguar XJ6 (XJ40) Official Parts Catalogue Covers 2.9 & 3.6 litre saloons up to 1989
236 pages with many drawings, illustrations, diagrams, softbound
190.646 Jaguar XJ-S Range Official Parts Catalogue All parts numbered and identified with many illustrations
Covers 6 cylinder 3.6 and 12 cylinder, 5.3 engines from Jan. 1987 to ‘91
316 pages with drawings, diagrams, softbound
96
©
V a n
G e s t e l
B & C
2 0 0 4
Factory owners handbooks
190.565 Jaguar XK120 Official Owners’ Handbook Controls and instruments, servicing, routine maintenance etc..
72 pages with drawings, softbound
190.566 Jaguar XK140 Official Owners’ Handbook
Operating maintenance and servicing instructions for open two-seater,
fixed head coupé, drophead coupé. 72 pages with drawings, softbound
190.567 Jaguar XK150 Official Owners’ Handbook Operating maintenance and servicing instructions
190.647 Jaguar MK II (3.4 litre) Official Handbook Operating maintenance and servicing instructions
86 pages, softbound
190.648 Jaguar MK II (3.8 litre) Official Handbook All info for operating, routine maintenance & service
84 pages with photos, drawings, softbound
190.649 Jaguar E-Type tuning & preparation for competition use
Official Jaguar booklet on how to improve performance for racing
24 pages with illustrations, softbound
190.650 Jaguar E-Type 3.8 Official Owners’ Handbook Essential guidance on operating, routine maintenance & service
190.651
Jaguar E-Type Series 1, 4.2 & 2+2 Official Handbook
All information for the satisfactory operation, maintenance, servicing of these
models. 81 pages with drawings, softbound
190.652
Jaguar E-Type 4.2 litre Series 2
Official Handbook
Operating, maintenance, servicing
190.653
Jaguar E-Type Series 3, V12 Official Handbook
Provides all the information required for operation and maintenance
190.654
Jaguar E-Type Series 3, V12 (US) (US)
Official Owners’ Handbook
Operating instructions routine maintenance, service instructions,
North American specs. 100 pages with drawings, softbound
190.655 Jaguar XJ6 3.4 & 4.2 Series 2 Official Handbook
Instructions for operating and maintenance (plus wiring diagrams) for the 4-door saloon. 62 pages, softbound
190.656 Jaguar XJ6C Series 2 Official Handbook General data, care and maintenance instructions for all components
62 pages (plus wiring diagrams), softbound
190.658 Jaguar XJ12 Series 3 Official Handbook
Identification, specs all components, bodywork care, fuel consumption
70 pages with drawings
190.659 Jaguar XJ12 Series 3 Official Owners’ Handbook General information, controls, components, care of bodywork
64 pages with photos, hardbound
190.660 Jaguar XJS (US) Official Owners’ Handbook General data, instruments, operating, emission control, maintenance etc..
©
V a n
G e s t e l
B & C
2 0 0 4
97
XK books & Jaguar buyer’s guide
Part nr.
190.621
The JaguarXKs
(by Paul Skilleter)
The Jaguar XK sports car continues to exert a very
great appeal to enthusiasts in all countries, this book
explains why the XK exerts this appeal and what it is
really to own and run an XK. All the pictures in this
book are from Jaguar’s own archives, except where
otherwise credited. Softback, 237 X 180 MM, 186
pages with B&W illustrations
Part nr.
Jaguar XK8,
the authorised biography
190.597
(by Philip Porter)
This is the full and exclusive story of the design,
development, engineering, testing and prodution of
Jaguar’s XK8. Top Jaguar author, Philip Porter, had the
backing of the company and full access to drawings,
records, photographs, cars and people involved of the
birth of this milestone.Hardback, 280 X 210 MM, 136
pages with 180 colour illustrations
Part nr.
Part nr.
190.563
Essential Jaguar XK,
XK 120/140/150
The cars and their story 1949-’61
(by Mike Lawrence)
Fifty years after their hasty development and launch, the
XK’s remain stronger as ever. Covers succeeding models
likethe C-Type, D-Type, XKS’s, analyzes their strenghts,
shortcomings, and motorsport histories, as well as the
practicality of owning an XK. Paperback, 260 X 210 MM,
80 pages with 60 colour & 60 B&W illustrations
190.601
Jaguar illustrated
Buyer’s Guide
(by Michael Cook)
This new edition covers all models starting
pre-WWII and continuing through the most
current models. Includes specifications and
production figures, value rating guide and
investment information. Provides good
history and identification of each vehicle.
Paperback, 237 X 189 MM, 160 pages
with 200 B&W illustrations
Part nr.
190.586
How to power tune
Jaguar XK engines
(by Des Hammill)
All you need to know about getting
maximum performance with reliability
from the famous Jaguar XK 6-cylinder
engine. A book packed with easily
understood and down to earth advice
based on the author’s many years on
hands-on experience. Softback, 250 X
207 MM, 112 pages with c. 200 B&W
pictures
98
Part nr.
Jaguar XK engine,
history, rebuilding, uprating
190.607
(by Dave Pollard)
The legendary 6-cylinder XK engine was fitted to Jaguars for around
30 years, incl. theMK VII, D-Type, E-Type and XK 150. Between the
mid- 1950s and mid- 1980s some 700.000 units were manufactured. It
still ranks as one of the most famous British engines and has been used as
the power plant in a number of ‘specials’ and kit cars. This fully illustrated
bookincludes the history of the engine, its applications on buying,
rebuilding, and tuning from mild to race special. Hardback, 270 X 210
MM, 192 pages with 360 illustrations
©
V a n
G e s t e l
B & C
2 0 0 4
E-type books and CD’s
Part nr.
190.589
E-Type: End of an Era
(by Chris Harvey)
This book has been re-issued to satisfy a
continuing demand. It provides a wealth of
technical information with a fully illustrated
history, anecdotes, practical tips and compulsive
reading in the form of contemporary and road
testers’ reports. There is also advice on what to
look for when buying an E-Type, its strengths &
weaknesses, hints on restoration and on preparing
a car for competition and fascinating information
on the competition successes and the men behind
the cars. Hardback 250 X 207 MM, 260 pages
with 193 B&W and colour photographs
Part nr.
Part nr.
Jaguar E-Type, A celebration
of the world’s favourite ‘60s icon
190.599
The E-type story,
part I on CD-rom
190.590
(by Nigel Thorley)
(by Philip Porter)
This great car, the Jaguar E-Type, is produced from 1961-1974
and even today is instantly recognisable by people of all
agesand is one of the best known icons of the 60s. Published to
coincide with the 40th anniversary of the E-Type that has been
celebrated worldwide in 2001. Hardback, 250 X 250 MM,
160 pages with 250 B&W and colour illustrations.
The Jaguar E-Type story is as exiting as the car itself, and
there are few cars more exiting than the E-Type. Still loved
by millions, the E-Type made a unique impact in 1961,
becoming an icon of the swinging sixties, fast , beautiful,
sexy, innovative,and affordable. On this CD-rom you
can watch period film and dramatic top gear video, view
archive pictures and so much more. The E-Type story part I
traces the background and the story of the 3.8 E-Types.
Part nr.
190.595
Jaguar E-Type
(by Matthew L. Stone)
Color history of Jaguars most loved car, the sexy and
elegant E-Type. These coupes and convertables are as
attractive today as they were when introduced in the
1960s. Jaguar E-Type covers all versions, Series 1,
1.1.2, 2, 3 and 2 + 2. Discusses E-Type roots in the XK
Series, D-Type, XK-SS, etc., racing, technical evolution and
company history. Includes sidebars on E-Types in movies
and TV, driving impressions, vintage racing, Lister Jags and
more. Historical B&W photography of Jags on the track
and in factory promotional shots. With new photography of
restored and original Jaguars. Paperback, 270 X 212 MM,
128 pages with 90 colour and 40 B&W illustrations
Part nr.
Jaguar E-Type,
A definitive history
190.600
(by Philip Porter, foreword by
Briggs Cuningham)
Part nr.
Jaguar E-Type
3.8 & 4.2, 6-cylinder & 5.3 V12
190.594
(by Denis Jenkinson)
This book contains not only an absorbing examination
of a very desirable automobile,but a fascinating
glimpse into the design and manufacturing processes
of another era. A special colour section makes this
book a handsome and thoroughly entertaining volume.
Paperback, 210 X 184 MM, 184 pages,
130 B&W and 24 colour illustrations
©
V a n
G e s t e l
B & C
2 0 0 4
The Jaguar E-Type is probably the most famous
and certainly one of the best-loved sports cars of
all time. When it first appeared in 1961 it was
seen as a giant step forward in design, offering
amazing performance with relative sophistication
and all clothed in a sensational body of timeless
beauty. Now re-issued, this classic awardwinning book is the result of an unrivalled
depth of research and presents a fascinating
and comprehensive history of this great car.
Hardback, 270 X 210 MM, 712 pages with 700
illustrations incl. colour
99
Haynes manuals & Tool catalogue
Haynes Manuals
The clear, step-by-step illustrated instructions cover the dismantling, inspection, repair and refitting of
the engine, cooling system, fuel and emission control systems, exhaust, ignition system, clutch, manual
gearbox, propeller shaft or drive shafts, braking system… These manuals are based on a complete
stripdown and rebuild. Manuals are hardback, 570 X 210 mm, B&W illustrations
Part nr.
Jaguar XJ12, XJS &
Sovereign Daimler Double Six
190.497
Part nr.
Haynes XJ
Restoration Manual
190.727
(by Dave Pollard)
An essiential reference for anyone considering a
restoration of a XJ6. Covers series I, II, III from 1969 to
1986. Shows you how to repair, strip down, rebuild and
tune your XJ. With tips on what to look for when buying
a used XJ6. Hardback, 270 X 210 MM, 216 pages
with 900 B&W illustrations.
Part nr.
Jaguar XJ6, XJ &
Sovereign, Daimler Sovereign
1968-’86
190.496
Part nr.
Jaguar XJ6 & Sovereign,
service and repair manual, 1986-’94
190.508
Part nr.
British parts,
tools & accessories catalogue
190.058
This is THE catalogue for all “British Classic Car” owners.
This full colour catalogue counting more than 130 pages is
absolutely packed with parts and accessories: Screws, bolts
and kits, fasteners, plugs, connectors, pipes, tubes, seals,
clamps, filters, grommets, spanners, screwdrivers, pliers,
engine tools, interiors, bodywork and electricity, lights
& lamps, mirrors, badges, fuel caps and pumps, straps,
safety belts, wipers, safety products, cleaning products,
gloves, clothes, caps, helmets, oil and oil based products,
steering wheels, wire wheels, spinners, hubs, stickers and
lots more. It’s impossible to mention how much you will
find in this catalogue so there’s only one thing to do: get
one as quickly as possible from your Anglo-Parts dealer.
100
Part nr.
Jaguar Saloons
MKI, MKII 240 & 340
190.692
Part nr.
E-Type, 6 cylinders
workshop manual Haynes
190.689
©
V a n
G e s t e l
B & C
2 0 0 4
Jaguar MKI, II series & XJ series books
Part nr.
Part nr.
Jaguar MKI & II with
240, 340 & Daimler derivatives
Jaguar XJ,
the complete companion
The compact jaguars were unique cars, combining the
sporting qualities for which Jaguar were renowned with
the elegance and comfort of the larger saloons. This
book tells the story, from their introduction in 1955
to their final demise in 1969. Incudes development,
competition fortunes, full specifications and advice on
buying.. Hardback, 250 X 195 MM, 198 pages with
many B&W and colour illustrations.
Years of research and a lifetime’s experience of owning and
restoring the Jaguar XK have gone into this detailed study of
Series 1, 2 and 3 XJ saloons and coupes, from the first XJ6
built in 1968 to the last Serie 3 V12. Paperback, 260 X 190
MM, 176 pages, many B&W and colour illustrations.
190.324
190.722
(by Nigel Thorley)
(by James Tailor)
Part nr.
You & your Jaguar XJ40,
buying, enjoying, maintaining and modifying
190.737
(by Nigel Thorley)
The XJ40, mainstay of Jaguar production from 1986 to 1994, was the last saloon in which Sir William
Lyons had any style involvement. It broke new ground with it’s technical sophistication and reintroduced
the marque to a younger buying public. Today the XJ40 - more reliable and economic to buy and run
- is an important ‘entry level’ model for first time Jaguar buyers and has a large following. Hardback,
270 X 210 MM, 160 pages with 175 illustrations, mainly colour
Part nr.
190.728
Jaguar MKI/II
Haynes Great
Car Series
(by Nigel Thorley)
The Jaguar MKI/II is arguably the most
famous and instantly recognisable
saloon produced by Jaguar to date.
Inside you will find a well documented
history of the car, incl. it’s extensive use
by British Police forces and crooks alike.
This beautifully produced book will
appeal to all fans of British cars as well
as to Jaguar owners and enthusiasts.
Hardback, 250 X 250 MM, 160 pages
with 250 B&W and colour illustrations.
Part nr.
You & your Jaguar XJS,
buying, enjoying, maintaining and modifying
190.605
(by Nigel Thorley)
The Jaguar XJ was one of the finest grand touring cars of its era. It survived the British Leyland days, Jaguar’s
privatisation and the takeover by Ford and it was still very much in demand even before its replacement, the XK8, came
on to the scene in 1996. This colour book, which covers the full road car and competition history, will fascinate all Jaguar
enthusiasts. Hardback, 270 X 210 MM, 160 pages with 175 illustrations, mainly colour
NEW RELEASE FOR 2006
Jaguar MKII catalogue
©
V a n
G e s t e l
B & C
2 0 0 4
101
Jaguar history books and toolcatalogue
Part nr.
190.592
Jaguar
(by John Heilig)
This is a colourful overview of more than 50 years of Jaguar
cars, with a focus on the most collectible and desirable cars
built after WWII. Jaguar books prove to be popular, not only
for those fortunate enough to own these remarkable cars, but
also for sports car enthusiasts who simply appreciate Jaguar’s
exquisite styling and outstanding performance. Cars covered
in this book include those built prior to WWII, the extremely
popular XK E-Type and XK Series cars, and the impressive new
XK8, which has graced the covers of automotive magazines
worldwide in the past year. Paperback, 230 X 230 MM, 96
pages with 80 colour illustrations
Part nr.
190.598
Part nr.
Jaguar, speed and style
Jaguar,
the complete
illustrated history
190.322
(by Martin Buckley)
This book, beautifully styled like the big cats themselves, is a
must-have purchase for all Jaguar enthusiasts. A brief historical
overview followed by authoritative descriptions of the cars
from the XK120 of 1948 to today’s S & X-types. With technical
specifications, driving impressions and buying hints. An absolute
feast of information. Hardback, 270 X 210 MM, 176 pages with
140 mainly colour illustrations.
(by Philip Porter)
This comprehensive history traces the development
of the Jaguar company from its humble beginnings
through the latest XJ6 models and the radical
change in its fortunes since the Ford takeover
and subsequent massive injection of capital. This
distinctive large-format book is a classic work of
reference, describing and illustrating virtually every
model produced. Hardback, 275 X 216 MM, 216
pages with 350 illustrations
Part nr.
Jaguar,
the complete works
190.593
Part nr.
(by Nigel Thorley)
Detailed and illustrated profiles of
all SS and Jaguar models from the
1931 SS1 to the latest Jaguar X-300
saloons, offering history descriptions,
specs, performance data and
production figures. All Jaguar-built
Daimlers are also included. Hardback,
280 X 210 MM, 160 pages with 90
colour and 150 B&W illustrations
Part nr.
190.591
Jaguar
190.733
Sir William Lyons
The official biography
(by Philip Porter & Paul Skilleter)
This book describes Lyons’s early influences
and how, while in his 30’s, he established a
substantial motor manufacturing business.
decades of glory followed by a period of
dispair. By the time of his death in 1985 he
knew that the company was on astrong path
to recovery. Hardback, 234 X 156 MM, 296
pages with 86 illustrations.
(by Nigel Thorley)
Jaguar is one of the most distinguished
and exciting car-makers in the world. This
full pictorial history shows the company’s
evolution from building motorcycle sidecars
in the 1920s to producing the luxury saloons
and sportcars of today. This book also covers
Daimlers which were produced by Jaguar
from 1960. Models featured include the XK
120, XK 150, the D-Type, the E-Type, the
Mark 2, the XJ6 and the XK8. This popular
account will be essential reading for Jaguar
ownersand enthusiasts, and for all those
with a keen interest in motoring history.
Paperback, 244 X 172 MM, 160 pages with
250 B&W illustrations
102
Part nr.
Jaguar
All the cars
190.734
(by Nigel Thorley)
This extensively researched guide
provides exhaustive reference detail for
all post-war Jaguar models. Information
provided includes technical specifications,
production cahnges, chassis numbers,
production numbers, colour schemes etc.
Each model is dealt with in a seperate
chapter with clear tabular information.
Hardback, 233 X 169 MM, 256 pages with
400 colour illustrations.
©
V a n
G e s t e l
B & C
2 0 0 4
DOWNLOAD OUR OTHER ANGLO PARTS
& ACCESSORIES CATALOGUES FOR FREE!
download the pdf versions of our catalogues for free
a t w w w. a n g l o p a r t s . c o m o r b u y t h e m f o r 1 0 e u r o s p e r i t e m .
MGTC
part n° 190.275
4
Sprite-Midget 1958-’6
part n° 190.504
Triumph TR2-4A
part n° 190.243
Jaguar XK120-150
part n° 190.694
MGTD-TF
part n° 190.067
0
Sprite-Midget 1965-’8
part n° 190.518
Triumph TR5-250-6
part n° 190.273
V8
Jaguar MKII-Daimler
part n° 190.721
MGA
part n° 190.001
A.H. 100/4-3000
part n° 190.509
Mini 1969-2000
part n° 190.720
Triumph Spitfire
part n° 190.133
Jaguar E-type
part n° 190.695
MGC
part n° 190.158
MGB
part n° 190.002
MGF-TF 1996-2005
part n° 190.519
er 90-110
Land Rover Defend
1984-2006
part n° 190.779
Triumph GT6
part n° 190.863
Morris Minor
part n° 190.718
II, III
Jaguar XJ, Series I,
part n° 190.780
& Accessories
British Parts, Tools
part n° 190.058
© A n g l o P a r t s n v 2 0 1 5 Quality Parts & Service
JAGUAR XK
120-140-150 • 1949-1961
www.angloparts.com
please visit our website for all contact information
Anglo Parts Shops
MAIN BRANCH BELGIUM
HOLLAND • ITALY • GERMANY
Authorized Anglo Parts Dealers
FRANCE • HOLLAND • SPAIN
SWEDEN • FINLAND
CZECH REPUBLIC • SLOVAKIA
LUXEMBOURG • POLAND • HUNGARY
T h i r d E d i t i o n • 19 0 . 6 9 4 Quality Parts & Service

Jaguar XK120-140-150 1949-1961

Transcription

Similar documents

Stavebnice modelu Resin kit BV 222 Dockwagen Complete resin kit

SERIE TC E F TC AND F SERIES

Language file - In English

to the Assembly Instructions PDF

catalogo serranda in alluminio

G.M.C. CCKW 353 DUMP TRUCK

DERBI SENDA DRD X

model year 2010 - TM Racing Motorcycles

mcmartin tbm-3700 fr..

DERBI SENDA DRD RACING 50 R/SM