Single Material Joining of Silicon- Infiltrated Silicon

Technology Metals | Advanced Ceramics
Single Material Joining of SiliconInfiltrated Silicon Carbide (SiSiC)
H.C. Starck Ceramics is an expert of technical ceramics products and a leading producer of components made from
oxide and non-oxide ceramics.
SiSiC from H.C. Starck Ceramics enables joining with excellent material and mechanical properties for the final product.
In the process, the individual components are bonded together using the same material. This is a leading edge for the
production of large-size components, parts with undercuts and designs with cooling channels.
Our SiSiC advantages:
>> Production of large-size components
>> High stiffness
>> Extremely homogeneous material
>> High strength
>> Joining areas with identical material properties,
>> Low coefficient of thermal expansion
such as E modulus and strength
>> Superior reliability
>> Material without contamination of
the bulk material with impurities
We produce components from SiSiC with the maximum dimensions of approximately 950 x 950 x 500 mm.
Do you have any further questions about our material or would you like to discuss the material-specific feasibility of your
components? Please do not hesitate to contact us.
MECHANICAL AND PHYSICAL PROPERTIES:
CHEMICAL CHARACTERISTICS:
StarCeram® Si
SiSiC
StarCeram® Si
SiSiC
Density
> 3.0 g/cm³
SiC
> 85 wt%
Closed porosity
< 2 vol %
Si
balance
Bending strength*
300 MPa
Cu
< 3 ppm
Weibull modulus RT
> 10
Fe
< 2 ppm
Young’s modulus
> 380 GPa
Fracture toughness
3.6 MPa√m
Thermal conductivity
175 W/mK
Coefficient of thermal expansion
20 – 100 °C
3.3 x 10-6/K
Hardness (DPH)
20 GPa
* 4-point-bending 40/20 mm
The conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you
test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis at least must include testing to determine suitability from a technical as well as health,
safety, and environmental standpoint. Such testing has not necessarily been done by H.C. Starck. All information is given without warranty or guarantee. It is expressly understood and agreed that the customer assumes and hereby expressly releases H.C. Starck from all liability, in
tort, contract or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not ­contained herein is unauthorized and shall not bind H.C. Starck. Nothing herein shall be construed as a recommendation to
use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent. Properties of the products referred to herein shall as general rule not be classed as information on the properties of the item for sale. In
case of order please refer to issue number of the respective product data sheet. All deliveries are based on the latest issue of the product data sheet and the latest version of our General Conditions of Sale and Delivery.
The values in this publication are typical values and do not constitute a specification.
H.C. Starck Ceramics GmbH
Lorenz-Hutschenreuther-Straße 81
95100 Selb
T + 49 9287 807-0
F + 49 9287 807-477
[email protected]