A beautiful pre-printed pinwheel panel and multi-striped

Transcription

A beautiful pre-printed pinwheel panel and multi-striped
© 2013 Stitched Together Studios for Benartex, LLC
A beautiful pre-printed pinwheel
panel and multi-striped fabric
makes this a charming table runner
that is both quick and easy to make.
Great gift for a house warming.
Uses Michelle D’Amore’s
Left Bank collection.
FINISHED SIZE: 22-1/2" X 60"
Please Note: The runner shown
is a digital representation.
Actual fabric repeats may vary
from design shown.
CUT
CUT PIECES VIA WOF
A
Jacobean Floral
3223-77 Brown
B
Calico Stripe
1/2 YD
3225-22 Pink/Orange
FUSSY CUT: (6) 2-1/2" x 11" strips.
C
Calico Stripe
1/2 YD
3225-44 Sage/Purple
FUSSY CUT: (7) 2-1/2" x 11" strips.
(2) 2-1/4" x WOF strips; BINDING.
D
Pinswheels Quilt
3222-72 Brown
2/3 YD
FUSSY CUT: REFER TO QUILT PHOTO.
E
Textured Scroll
3229-07 Ivory
1/4 YD
(4) 1-1/2" x WOF strips* subcut
(2) 1-1/2" x 15" strips.
(2) INNER BORDER, SEE STEP 4.
F
Textured Scroll
3229-45 Dark Green
1/4 YD
FQ
(1) 2-1/2" x WOF strips, subcut
(10) 2-1/2" squares.
(3) 2-1/4" x WOF strips; BINDING.
QUILT DIAGRAM
A
F
6. BC BINDING: Sew B and C 2-1/4" binding strips together, via short ends
as follows: B-C-B-C-B set aside.
FINISHING Cut batting and backing 3" larger than top on all sides. Layer
backing, batting and top together and baste or pin. When done quilting,
trim excess batting and backing. Bind with BC BINDING in the usual manner.
FINISHED QUILT SIZE: 22-1/2"W X 60" L
Note: If this Benartex pattern is included in a kit, any questions about the kit
should be addressed to the vendor from whom you bought it.
Want more of Left Bank? How about this runner in the cream
colorway, Plate du Jour! Easy to make and fun to display.
B
F
C
D
B
F
C
F
B
D
C
F
B
F
C
D
B
C
F
E
F
L
E
L
E
L
A
F
L
L
5. A BORDER: Sew (1) A 3-1/2" x 17" strip to top and to bottom of runner
top. Then sew (1) A 3-1/2" x (60-1/2") strip to each side of runner top.
C
L
BORDER ASSEMBLY Measure length of runner top to ensure A and E
border cutting sizes. Below are our measurements.
D
L
3. Sew BCF strips to each side of center unit. REFER TO RUNNER PHOTO FOR
PROPER ORIENTATION OF STRIPS.
B
L
2. CENTER UNIT: Using B and C 2-1/2" x 11" strips and D 11" square make
center unit, as shown in QUILT DIAGRAM. Trim to 11" x 52-1/2".
F
L
UNIT ASSEMBLY
1. BCF STRIPS: Make BCF strips using B and C 2-1/2" x 11" strips and F
2-1/2" squares. Trim to 2-1/2" x 52-1/2". Make 2 BCF strips. Set aside.
C
L
For following instructions refer to QUILT DIAGRAM.
4. E BORDER: Sew (1) E 1-1/2" x 15" strip to top and to bottom of runner
top. Then sew (1) E 1-1/2" x (54-1/2") strip to each side of runner top.
E
L
(4) 11" squares.
L
*SEW STRIPS VIA SHORT ENDS | WOF=WIDTH OF FABRIC
(4) 3-1/2" x WOF strips* subcut
(2) 3-1/2" x 17" strips.
(2) OUTER BORDER, SEE STEP 5.
L
1/2 YD
L
QTY
L
L
SAMPLE KEY/SKU
A
A
BENARTEX, LLC • 132 WEST 36 TH STREET, 4 TH FLOOR • NEW YORK, NY 10018 • T: 212-840-3250 • WWW.BENARTEX.COM