The Land Before Time

The Land Before Time
Panel
Fabric Design by Shelly Comiskey
A Free Project Sheet From
Finished Quilt Size: 51” x 59”
49 West 37th Street, New York, NY 10018
tel: 212-686-5194 fax: 212-532-3525
Toll Free: 800-294-9495
www.henryglassfabrics.com
The Land Before Time
Finished Quilt Size: 51” x 59”
Panel
Fabrics in the Collection
6329-44
Stripe - Beige
6329-11
Stripe - Blue
6328-44
Plaid - Beige
6328-11
Plaid - Blue
6327-61
Dot - White
6327-44
Dot - Yellow
6327-11
Dot - Blue
6326-66
Footprint - Green
6326-44
Footprint - Beige
6326-11
Footprint - Blue
Fluffy Solids Off White
Fluffy Solids Green
Fluffy Solids White
Fluffy Solids Blue
Fluffy Solids Yellow
6325-11
Novelty Stripe - Blue
6323-44
Dino Allover - Beige
6323-11
Dino Allover - Blue
6322P-11
Panel- Blue
The Land Before Time
Materials
1 panel
⅓ yard
½ yard
⅓ yard
⅓ yard
½ yard
⅞ yard
½ yard
3 ½ yards
Panel – Blue
Footprint – Blue
Dot – Yellow
Footprint – Beige
Footprint – Green
Plaid – Blue Dino Allover – Blue Stripe – Blue
Dino Allover – Beige
6322P-11
6326-11
6327-44
6326-44
6326-66
6328-11
6323-11
6329-11 (Binding)
6323-44 (Backing)
Page 1
Panel
Cutting Instructions
Please note: all strips are cut across the width of fabric
(WOF) from selvage to selvage edge unless otherwise noted.
From the Panel - Blue (A), cut:
• (1) panel approximately 30 ½” x 38”.
From the Footprint - Blue (B), cut:
• (2) 2 ½” x 38” strips.
• (2) 2 ½” x 34 ½” strips.
From the Dot - Yellow (C), cut:
• (3) 4 ⅞” x width of fabric (WOF) strips. Sub-cut into (20) 4 ⅞” squares. Cut the squares across one diagonal to
make (40) triangles.
From the Footprint - Beige (D), cut:
• (2) 5 ¼” x WOF strips. Sub-cut into (10) 5 ¼” squares. Cut the squares across both diagonals to make (40) triangles.
From the Footprint - Green (E), cut:
• (2) 5 ¼” x WOF strips. Sub-cut into (10) 5 ¼” squares. Cut the squares across both diagonals to make (40) triangles.
From the Plaid - Blue (F), cut:
• (6) 2” x WOF strips. Sew the strips together, end to end on a diagonal, and cut (2) 2” x 48 ½” strips and (2) 2” x 43 ½”
strips.
From the Dino Allover - Blue (G), cut:
• (6) 4 ½” x WOF strips. Sew the strips together, end to end on a diagonal, and cut (4) 4 ½” x 51 ½” strips.
From the Stripe - Blue (H), cut:
• (6) 2 ½” x WOF strips for the binding.
From the Dino Allover - Beige (Backing), cut:
• (2) 59” x WOF strips for the backing. Sew the strips together and trim to make the 59” x 67” back.
The Land Before Time
Page 2
Panel
Sewing Instructions
1. Sew (1) 2 ½” x 38” Fabric B strip to each side of the
30 ½” x 38” Fabric A panel. Sew (1) 2 ½” x 34 ½”
Fabric B strip to the top and to the bottom of the Fabric A
panel. Trim the block to 32 ½’ x 40 ½” to complete the
center panel.
Quilt Top Assembly
Refer to the Quilt Photo while assembling.
4. Sew (5) Left CDE blocks and (5) Right CDE blocks
together to make one side border. Repeat to make a
second side border. Sew the borders to each side of the
center panel.
2. Follow Figure 1 and sew (1) Fabric C triangle, (1)
Fabric D triangle and (1) Fabric E triangle together to make
one Left CDE block. Repeat to make (20) Left CDE blocks
total.
5. Sew (5) Left CDE blocks and (5) Right CDE blocks
together to make the top border. Repeat to make the
bottom border. (NOTE: Pay attention to the orientation
of the corner blocks.) Sew the borders to the top and
bottom of the center panel to make the quilt top.
make 20
C
E
D
Fig. 1
3. Follow Figure 2 and sew (1) Fabric C triangle, (1)
Fabric D triangle and (1) Fabric E triangle together to make
one Right CDE block. Repeat to make (20) Right CDE
blocks total.
make 20
C
E
D
6. Sew (1) 2” x 48 ½” Fabric F strip to each side of the
quilt top. Sew (1) 2” x 43 ½” Fabric F strip to the top and
to the bottom of the quilt top.
7. Sew (1) 4 ½” x 51 ½” Fabric G strip to each side of the
quilt top. Sew (1) 4 ½” x 51 ½” Fabric G strip to the top
and to the bottom of the quilt top.
8. Layer and quilt as desired.
9. Sew the (6) 2 ½” x WOF Fabric H strips together, end
to end with 45-degree seams, to make the binding. Fold
this long strip in half lengthwise with wrong sides together
and press.
10. Bind as desired.
Fig. 2
©2014 Henry Glass & Co., Inc.