KANATOL - 1001 DI ISO DECYL PHTHALATE (DIDP) Primary

KANATOL - 1001
DI ISO DECYL PHTHALATE (DIDP)
Primary plasticizer for PVC and PVC copolymers
Chemical Nature
Phthalic acid esters of C10 alcohols.
Chemical Name
:Di Iso Decyl Phthalate.
Trade Name
:DIDP
Molecular Formula
:C28H46O4
Molecular Weight
:446
Molecular Structure :C6H4(C00C10H21)2
O
II
- C - O - CH2 - CH2 - CH2 - CH2 - CH2 - CH2 - CH2 - CH
CH3
CH3
CH3
- C - O - CH2 - CH2 - CH2 - CH2 - CH2 - CH2 - CH2 - CH
II
O
CAS Number
UN. NO
EINECS NO
Specification
CH3
26761-40-0
:::-
247-977-1
Characteristics
Unit
Test Method
Value
Colour
Volatile Loss (130°C/3 Hrs)
Ester Value
Acidity
Moisture
Specific Gravity (27°C)
Ester content
Heat Stability (180°C/2 Hrs)
Acidity after heat treatment
Plasticizing Esters by GC
Residual alcohol
HU
wt..%
mg KOH/g
wt..%
wt..%
wt..%
HU
wt..%
% by area
% by area
ASTM-D-1045-86
KLJTM
ASTM-D-1045-86
ASTM-D-1045-86
ASTM-E-203
ASTM-D-1045-86
ASTM-D-1045-86
ISI-9591-96
ASTM-D-1045-86
KLJTM
KLJTM
20 max.
0.10 max.
249–254.
0.010 max.
0.10 max.
0.960–0.967.
99.50 min.
No Change.
0.03.
99.50 min.
0.10 max.
Volume Resistivity
Boiling Point @ 3.5mmHg
Pour point
Viscosity at 20°C
Ohmcm
°C
°C
cp
KLJTM
lit.
lit.
KLJTM
Flash Point (COC)
Refractive Index (27C)
°
°C
–
KLJTM
ASTM-D-1045-86
4.5±1.0X1011.
255.
-48.
108 ± 2.
232.
1.483-1.486.
Typical Properties
Total Solution in Plasticizers
Contact: [email protected]
An ISO 9001:2000 and ISO 14001:2004 conglomerate
24
www. kljindia.com
KANATOL - 1001
Properties
DIDP is a clear, colourless, and odourless liquid, free of foreign materials. It is
soluble in most organic solvent and in soluble in water.
Application
Around 95% of DIDP is used in PVC as a plasticizer. More than half of the
remaining 5% is used in the production of polymers other than PVC (e.g. rubbers).
The remaining DIDP used in non-polymer application including anticorrosion
paints, anti-fouling paints, lacquers, inks, adhesives and sealants.
In wire and cable formulation DIDP finds wide use in 75°C THW building wire
compounds and in 80°C and 90°C appliance wire insulation.
In plastisol application, DIDP provide good initial viscosities and Excellent
viscosity stability.
Plasticizing Efficiency
1.10
Compatibility with
Secondary Plasticizers
Very limited in comparision of DOP.
Packing & Storage
DIDP is packed in 200/225 kg iron drum / HDPE drum, 20 - 22 MT in Flexi tank /
ISO tank / road tanker. It is stored in tightly closed container, in a cool, dry,
ventilated area.
Shelf Life
Original characteristics remain intact for 24 months, if kept in recommended
storage.
Safety
The MSDS can be provided on request.
Disclaimer
The data contained in this publication are based on our current knowledge and
experience. During processing, there are so many factors which may affect the
application part of TOTM, so these data neither imply any guarantee of certain
properties, nor the suitability of the product for the specific purpose. Any data given
in this publication may change without prior information and donot constitute the
agreed quality of our product.
Total Solution in Plasticizers
Contact: [email protected]
An ISO 9001:2000 and ISO 14001:2004 conglomerate
25
www. kljindia.com