LINEAR STRIP CEILINGS

Transcription

LINEAR STRIP CEILINGS
LINEAR STRIP CEILINGS
Metapan Metal Panel
Linear ceiling is a convenient and flexible
alternative to tile ceilings. Suitable for both
indoors and outdoors usage, linear ceiling
systems have been a vastly popular
suspended ceiling solution for many years
now.
Our C-type closed ceiling system consists of
long, chamfered edged, roll-formed panels
of variable length clipped on to concealed
carrier rails. The panels adjoin each other by
means of panel splices. Panel widths range
ADVANTAGES:
from 150mm to 300 mm and panels of
different widths can be utilized together
The system offers a smooth, monolithic
within the same ceiling system as desired. ceiling look thanks to the closed joints.
Due to easy cleaning and low dust
All Metapan products are tested according retention features of the linear panels, the
to DIN EN 13964.
system is best suited for hospitals, labarotaries,
kitchens and any other area requiring
sanitation.
Panels do not require any special tools to
demount thus allowing easy maintenance
access to the plenum.
Panel lengths are tailored to requirements
thus allowing for rapid installation and
minimal need for joining.
METAPAN ULTIMA®
C TYPE LINEAR PANELS
Width Options
15 mm
15 mm
150 mm
250 mm
15 mm
15 mm
200 mm
300 mm
Linear panels are rollformed from coilcoated and stove enameled metal. The polyester
based organic coating consists of 5 microns of primer and 20 microns of top coat on the
face and 5 microns of service coat on the back.
Aluminum panels are manufactured from aluminum alloy 3003 or alloy 5050.
Galvanized steel panels are manufactured from hot-dipped galvanized steel of grade
DX51 D +Z.
Openings necessary for lighting, sprinkler, loudspeaker and so forth can be factory
fabricated.
Please see the thickness details section for material thickness.
1
2
Dimensions
Thickness Details
Minimum Panel
Length
90 cm
Maximum Panel
Length
600 cm
Maximum Carrier
Length
600 cm
Width
Carrier and Hanger Spans
1
170 cm
2
100 cm
Thickness
150mm
0,60 mm Alum
0,50 mm Galv. Steel
200mm
0,70 mm Alum
0,50 mm Galv. Steel
250mm
0,70 - 0,75 mm Alum
0,50 mm Galv. Steel
300mm
0,75-0,80 mm Alum
0,60 mm Galv. Steel
METAPAN ULTIMA®
C TYPE LINEAR SUSPENSION SYSTEM
SYSTEM COMPONENTS
C TYPE CARRIER
HANGER SYSTEM
PERIMETER TRIMS
HOLD DOWN CLIP
I
NSTALLATION INSTRUCTIONS
* Install hanger wires at every 170 cm(max) parallel to the runners and at every 100 cm (max) parallel to
the linear panels.
* Install perimeter trims around the edges of the area.
* Attach the hanger wires to the C type hangers.
* Install the runners by inserting the C type hangers' tips into the pre-punched slots on the runners and
secure by rotating hangers by 90º.
* At wall connections lay the runners into the perimeter trim. Carefully bend the pre-punched notches on
to the panel when using L shaped runner. Otherwise use hold down clips where panel cutting is necessary.
TECHNICAL
INFORMATION
A
B
C
A
C Type
Carrier
Rollformed from 0,75mm thick hot-dipped galvanized steel or 0,95mm
thick aluminum alloy.
Standard Length:
3m
Steel grade:
DX51D+Z
Coating thickness:
G90 (275gr/m²) or G60 (180gr/m²)
Tensile strength (N/mm2):
min. 300
Elongation(%):
min. 22
Material subject to DIN EN 10327
Aluminum alloy:
Temper:
Ultimate (Kg/mm2):
Elongation(%):
Material subject to DIN EN 485-1
3003
H28
19,60 - 20,85
min. 2,24
B
Hanger
Wire
Straightened and cut to length galvanized steel wire
Diameter:
4,00 mm (+-0,05mm)
Length:
60 cm - 400 cm
Tensile strength (kg/mm2):
40-55
Galvanization is subject to TS EN 10223
C
C Type
Hanger
Manufactured from stainless steel
Wall Angle
Material thickness:
0,60 mm
Stainless type:
301
Tensile strength (N/mm2):
appr. 1455 (HRC: 45)
Material subject to DIN EN 10151
Rollformed from 0,50mm thick hot-dipped galvanized steel. Either
coilcoated or eloctrostatically powder coated.
Standard Length:
3m
Steel grade:
DX51D+Z
Coating thickness:
Minimum 184gr/m²
Tensile strength (N/mm2):
min. 300
Elongation(%):
min. 22
Material subject to DIN EN 10327
All suspension system components are classified as Class 1 in accordance with the provisions of EN 13501-1.
PERIMETER TRIM OPTIONS
22
19
34
19
22
K12
L shaped angle
D14
C shaped angle
Perimeter detail with L shaped
profile
Perimeter detail with C shaped
profile
PANEL SPLICE
Manufactured from 0,65 to 0,80 mm
thick aluminum sheet according to the
panel width.
PERFORATION OPTIONS AND ACOUSTIC PROPERTIES
5,5
5
2,
5
5
5,5
1,8
2,5 mm hole diameter
1,8 mm hole diameter
4,2
4,2
1,5
1,5 mm hole diameter
METAPAN suspended ceilings are characterised by high acoustic efficiency. Sound absorption is provided
by a 0.3 mm thick acoustic nonwoven fabric adhered to the perforated tile.
When compared with the conventional sound absorption agents like the mineral wool, nonwoven fabrics
offer a number of benefits, such as higher sound absorption, better look and superior flame retardancy.
Moreover, being lighter and particularly thinner than the conventional mats, nonwoven fabric reduces
both shipping and inventory costs and calls for less labor during installation.
The nonwoven material used by Metapan, namely R 6/60 FF, is manufactured by Royalin GmbH and ma
of cellulose and glass fibers.
It provides flame retardancy according to DIN 4102 B1. All Ultima product groups have been tested for
sound absorption in accordance with DIN EN 20 354 and the classified as per DIN EN ISO 11 654. The
textile is available in two standard colors of black and white, yet other colors being offered upon reques
Note that depending on the requirements, Ultima metal panels are available with or without the
acoustical fabric.
2,5 mm hole
QUALITY ASSURANCE
Metapan has insisted on the business attitude of 'quality first and client
foremost' and proud to be EN ISO 9001:2000 certified by TUV Germany and
EN 13964 certified by TSE Turkey. All Metapan products bear CE and UKRSEPRO
marking.
CE EN 13964
TAIM member
Fire Class: A2 - s1, d0
sstoff
tikvlie
ven
Akus
onwo
n
c
ti
s
tique
Acou
cous
a
é
s
s
Fas er
Nonti
be r
P
P/W
86 S
C 19
Gl as
os e +
Zel lul
glas s
o se +
cel lul
verr e
ose +
ce llul
TSE EN 13964
Daten
nische
Tech
ta
cal da
s
Techni
nique
es tech
Donné
Fi
Fibr e
001 DIN 60
EN 2
ys tem
Bi nd es
m
sy ste
Bi nd er d e lia nt
me
Systè
r
st ru ktu ctu re
Vli es
s tru
sé
ov en
No nw e de n on tis
t ur
Str uc
icht
engew
Flä ch i ght
we
Area
rfac e
de su
ids
Po
Di ck e
es s
Thic kn
se ur
Epais
T1
tha rz
Ku ns
si n
etic re t iqu e
synth
syn thé
rés ine
9 09 2
EN 2
wi rr
ra nd om tée
ien
non or
9 092
EN 2
9 0 73
- T1
63 g/m
0, 22
2
mm
län gs
rec ti on
ne di
mac hi dinale
u
lon git
quer
tio n
direc
e
cr os s
ers
v al
5 0m m
tra ns
ISO 9001:2008
r af t
t zugk
gt h
re
Höc hs sil e str en
ru ptu
ten
al à la
ax im
Max.
nce m
Rés ista
0 73
EN 29
- T2
80 N
0 73
EN 29
- T3
/5 0m
50 N/
2%
m
c tio
län gs
ne d ire
mac hi dinale
u
lon git
n
qu er
tio n
direc
cr os s rsal e
ve
T3
tra ns
073 nicht
2%
EN 29
h, ist
kra ft
hlblec 4102-A2.
gth
s tz ug
s tr en
tem Sta
Höch
nisier fklasse DIN
g bei
ens ile
e
t
lva
un
x.
tur
ga
ial
tof
m
us
rup
De hn
mater at ma
der Ba
rforierte
al à la
at ion
02
tal, the
mit pe derungen art.
Elo ng
t maxim
eet me code DIN 41
for
rbund
ed sh
e men
ial
im Ve ht den An , MPA Stuttg
perforat ng mater
Al lo ng
ric
terial,
.21
nized
ildi
Das Ma r und entsp 03-I-16.4
galva
the bu
ba
ur
n with ements of
po
,
brenn nis: P-BWU
ctio
A2
ug
class 03-I-16.4.21
ttgart.
constru
requir
Prüfze
de la
WU
ceiling meets the , MPA Stu
it
nces
.21
barke
and
exige contrôle: P-B
rt of the
Brenn
As pa lammable WU03-I-16.4
nsait les
de
pfehle set satisf . Marque
is non-f rtificate: P-B
ist em
nden
mable
4102
gungen uchten, Ko
u inflam selan DIN
din
A2. Ce
cy
pe
Be
t
tan
ftfe
n
es
Resis
r Lu
ützten
tructio
tériau
Flame
tgesch her relative
Le ma x de cons
d lich
ho
iau
gen.
nen un rmeidung
matér ttgart.
betra
orage
g).
Jahr
, Ve
n, trocke
ed (st
MPA Stu
kühle max. 40°C einstrahlun maximal 1
mend
té
g unter
tur
recom formation of
llte
mabili
nnen
ns is
Inflam
y,
Lagerun gertempera direkter So beitung so
d
conditio humidit
rar
wert (Larbildung un
zur Ve
rotectedh relative air
t-p
bis
r
sse
ri
ue
wa
and ligh ce of hig
ngen,
1 year.
à l' ab
Lagerda r cool, dry
dingu
an
ceed
es et
ion).
oid
rbe
Die
ex
ch
iat
av
ge
t
,
sè
de
La
,
lar rad
ld no
e un
40°C
uer
îches
Storag ure max. d direct so ssing shou
ns fra
Lagerda
rat
an
nditio
tempe sed water until proce
des co
e dans
conden e duration
itions,
stocké
en
.
e cond
de ck
it être
Storag
ns 1 an
el s
Storag e duration
us tik
da
an
e devra
Ak
p
n
dis
g
ür
tio
ilin
rchan
tof f f
Storag
omma
tic ce
La ma ière.
V liess
la cons
a co us
lum
es
end er
lons
de la
en for
rb ier
age,
ou st iqu
conseil
nw ov
gasin
ab so
ds ac
ation Nous
en t no
Sch all
s de ma
p laf on
so rb
Temp de consomm
po ur
.
un d- ab
s
ore
x
so
on
mp
ma
Te
ss é ins
is piele
nonti
mm
n
gs be
18 00
B rei te
nd un
An we
dive rse wid th
s
en.
t
ca ti on
terlieg
App li
diffe ren di ff éren ts
n.
gen un
ns
ductio
rs
ca tio
wankun nces.
de pro
Ap pli
larg eu
nssch
n tolera
duktio
usueles
re ite
ctio
Pro
nb
du
tions
en
pro
Rolle
x varia
n üblich to normal
ux
ises au
die de
width
d
ea
r,
ll
um
ul
cte
da
so
ro
Ro
rte
qui
subje
r d es
ttelwe
ich are
yennes
wh
mo
llen Mi
La rg eu
s
rs
ste
lue
valeu
ngaben t average va
antes
hlena
en
représ
Alle Za
repres
riques
mbers
numé
All nu
ications
les ind
Tous
05)
04 / 20
05 ¾
( Rev.
en s
nwov
a l No
096
chnic
8 0-5
· Te
620 1
KG
(0)
to ffe
+49
.c om
ne :
liess
g- nw
rgV
nb er
· P ho
be
n
de
de
heim
fr eu
Freu
m@
We in
htu
5
46
.Bec
D- 69
chen
l : Jo
Em ai
x
· Fa
: +4 9
01
(0) 62
88-5
09 6
All components tested according to EN 13964.
METAPAN
Headquarters / Factory: Keresteciler Sanayi Sitesi 4.Cad. No:1 Sarayköy Kazan / ANKARA
Tel: +90 (312) 815 20 56 Fax: +90 (312) 815 20 88
Istanbul Office: Göksu Evleri Sitesi.Akkavak Cad. Oyaçiçeği Sk. No:38 Beykoz/ Istanbul
Tel: +90 (216) 465 50 90 Fax: +90 (216) 465 74 47
www.metapan.com.tr
[email protected]