Flyer Industry - Sack und Kiesselbach

Forging, Sizing, Net Shape Forming for cold, warm and hot
massive forming of high precision applications.
HYDRAULIC DOWNSTROKING
PRESS MODEL
TRP 2000 kN – 25000 kN
up to 20 parts/min
BETTER RESULTS WITH LESS STRIKES AND FORCES
Sack & Kiesselbach delivers
beside the transfer press the
feeding unit, transfer system,
part lubrication and tooling.
VARIOUS SPEEDS AND FORCES IN EVERY RAM
POSITIONS MEET THE REQUIREMENTS
GREAT PLEASURE WITH A VERY COMFORTABLE
OPERATION
TRP-1000
EXCELLENT DEVELOPMENT OF A SMART DESIGN WITH
SO MANY FEATURES
EASY AND LESS MAINTENANCE
HYDRAULIC DOWNSTROKING
PRESS MODEL
OKP 2000 kN - 25000 kN
up to 20 parts/min
SHORTEST CHANGEOVER TIME
SSpA – SERVO DIRECT DRIVE SYSTEM UNDER THE
BLUECOMPETENCE LABEL
The OKP is designed to
press in single stage with manual
feeding or various automatic
solutions.
OKP-500
HYDRAULIC DOWNSTROKING
PRESS MODEL
VSP 300 kN - 1000 kN
up to 6 parts/min
Sack & Kiesselbach Maschinenfabrik GmbH
Westfalenstraße 68
D-40472 Düsseldorf
The vertical spline press VSP,
leads the splines to higher loads,
torque and decreasing sizes.
Tel: +49-211-9 04 88-0
Fax: +49-211-65 23 14
[email protected]
VSP-50
Sack & Kiesselbach, 120 years experience of mechanical
engineering „Made in Germany“.
With more than 1000 sold hydraulic presses world wide, the
family owned company from Düsseldorf established their
reputation as a continuous partner in press manufacturing.
Sack & Kiesselbach is an innovative specialist for oil hydraulic
press systems to get solutions on individual tasks for the cold,
warm and hot massive forming .
As „Turnkey Machine Supplier“, Sack & Kiesselbach delivers
cost-effective complete solutions and single sources, from
process technology up to the fully automated press system.
Energy Saving Direct Drive System (SSpA)
HYDRAULIC PRESSES MODEL OKP
The conventional drive of a hydraulic pump is an AC threephase motor but nowadays, the technology allows us also to
use a direct AC Servo Drive.
DOLD
Vöhrenbach, Germany | OKP-500 / OKP-1450 / OKP-1600
BENEFITS WITH SSpA:
FORD
Köln, Germany | OKP-250
• MINIMIZED ENERGY CONSUMPTION UP TO 50%
• VERY PRECISE SET-UP OF THE PRESSING FORCE
• HIGHEST ACCURACY OF RAM / TOOL POSITION
• REDUCED OIL FLOW RATE
• LESS WEAR ON MECHANICAL PARTS OF THE DRIVE SYSTEM
• LOW OPERATION AND MAINTENANCE COSTS
With tailor made solutions in various fields as non-ferrous
forming, compressed powder applications, health care
products as well as diamonds fabrication, Sack & Kiesselbach
supplies a huge range of applications to the customer.
ENERGY SAVING DIRECT DRIVE (SSpA)
Closing
Press
Forming
Release
Return
Strike
Loading/Unloading
Energy Consumption [kWh]
Ram Position
AIK
Hamamatsu, Japan | OKP-1250 / OKP-1600
GEVELOT
Levallois-Perret, France | OKP-800
RMA
Kehl, Germany | OKP-2500
HYDRAULIC PRESSES MODEL TRP
FORD
Köln / Wülfrath, Germany | TRP-200 / TRP-360
UNYTITE
Peru / Kobe, USA / Japan | TRP-1600 / TRP-1600
SONA BLW
München / Selma, Germany / USA | TRP-1000 / TRP-300 / TRP-400
METALDYNE BLUFFTON
Indiana, USA | TRP-800
HAY
Bockenau, Germany | TRP-800
Conventional Drive n ~
1500 min-1
Servo-Direct-Drive n ~ 0 –
3000 min-1
Base Consumption
(Pilot Oil, Cooling)
Time [s]
PPF CHINA
Jiangyan, China | TRP-600 / TRP-1250
HYDRAULIC PRESSES MODEL VSP
AMIS
Gueret, France | VSP-50