Verticon® 100 BGA
Transcription
Verticon® 100 BGA
BGA SERIES CONTACTOR Verticon® 100 BGA For BGA and FBGA Applications Bringing Higher Performance to BGA Test Ideal for High Speed Digital, RF, and Precision Analog Testing Precision Measurements The short contact length of the Verticon® 100 BGA contactor, makes it well suited for high frequency wireless/ microwave applications as well as high-speed digital interfaces. The combined contact profile and proprietary plating enable low and stable contact resistance measurements, making it ideal for precision low noise DC measurements. Repeatable Results The solid contacts of the Verticon® 100 BGA contactor provide a consistent electrical length that reduces measurement variance - resulting in higher yields and greater opportunity for up-binning/speed-binning. Low Maintenance Verticon® 100 BGA’s patented selfcleaning micro wipe action breaks through oxides on the device ball, then clears the contact tip, resulting in extended MTBA cycles. The engineered materials of construction result in long contact life. And replacement contacts are reassembled in a cartridge, providing quick mean-time-to-repair. Precision Measurements • Low L (inductance): 0.45nH (self) • High F (frequency): 20+ GHz • Low, Consistent CRES: Avg <50mΩ Repeatable Results • Higher First Pass Yields • Lower Measurement Variance • Greater Up-binning/Speed-binning Low Maintenance • Self-Cleaning Wipe for Extended MTBA • Replaceable Cartridge for Fast MTTR • Long Life Contacts Your Contact for Higher Performance Johnstech Verticon® 100 BGA Contactor Specifications Pitches 0.5mm - 1.27mm Electrical Specifications* Electrical Length (compressed height): Inductance: Capacitance: S21 Insertion Loss/Bandwidth (Ground-Signal-Ground): S11 Return Loss/Bandwidth (Ground-Signal-Ground): S41 Crosstalk/Bandwidth (Ground-Signal-SignalGround): Average Contact DC Resistance: Current Carrying Capacity: Current Leakage: Distance to Decoupling Pocket: 1.00 mm Self: 0.448 nH Mutual: 0.085 nH Ground: 0.088 pF Mutual: 0.011 pF -1dB @ 20.0+ GHz -20dB @ 22.0 GHz -20dB @ 22.0 GHz <50 mOhms 1.4 A <1pA @ 10 V 3.05-4.51 mm depending on the package Mechanical Specifications Physical Contact Length: Compressed Height: Contactor Life (# of insertions): (Nominal) Mechanical Compliance: Electrical Compliance (operating range): Contact Force (fully compressed): Contact Tip Coplanarity: Environmental: Housing Material: 1.39 mm 1.00 mm Cartridge = 500,000 Housing = 2,000,000 0.392 mm Contact Options There is one standard contact set for all configurations. Johnstech Services/Resource Options Test Floor Technical Support - Worldwide Additional Services Include: First-Pass Yield Enhancement; Performance Audits; Customized Training; Applications Engineering. Online Tech Support at: www.johnstech.com/support Engineering Services Load Board Evaluation & Testing; HFSS 3D Modeling; Electrical Performance Analysis; PCB/ Contactor/Device Optimization; Contactor S Parameter Data; Thermal Conductivity Analysis and Advanced Design System (ADS) Simulation, Analysis & Optimization. Website (www.johnstech.com) Product, Test, Industry Support Information; Downloadable, Product Spec Sheets; Maintenance and Inspection Guides; Tech Papers; Application Notes. Methodology 0.17 to 0.20 mm 35 grams per ball, minimum <0.05 mm max -40°C to 125°C Torlon® *Measured using BGA package with SAC 305 balls at 0.8 mm pitch Manual Actuator Description Ball Count DL-VCMA ZMA Double Latch, Clip-On Hinged Clam Shell 0-100 81+ Double-Latch VCMA Single-Latch ZMA Uncompressed Compressed Specifications provided here are based on internal testing at Johnstech, customer production sites, and third party electrical testing. Actual individual results may vary based on a wide range of variables including: handler/contactor/load board interface, handler plunge depth and velocity, device presentation, alignment plate condition, solder ball material, test floor conditions, maintenance activities, mounting/fastening techniques, non-coplanarity from site to site, non-coplanar docking, and temperature extremes. Johnstech International Corporation • 1210 New Brighton Boulevard • Minneapolis, MN 55413-1641 USA Tel 612.378.2020 • Fax 612.378.2030 • www.johnstech.com • E-mail [email protected] © Copyright 2012, Johnstech International Corporation. Specifications subject to change without notice. No part of this document may be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without expressed written permission from Johnstech. Johnstech and Johnstech logo are registered trademarks in the USA and other countries. Johnstech products and components are covered by patents and copyrights in the USA and other countries. All other trademarks not owned by Johnstech, which appear within are the property of their respective owners. #1486-1012