Smoke Clean2 - Esteam Cleaning Systems

SMOKE CLEAN
SMOKE CLEAN has been specifically formulated
for the fire restoration industry. This product
eliminates residues resulting from Smoke, Soot
and Carbon Combustion. Smoke Clean is also
ideal for removing grease, oil, food and tobacco
stains from almost any hard surface. Effective
for use on walls, counters, floors, painted
surfaces, ceramic tiles, sinks, cabinets, bathtubs, conrete, sealed wood and much more.
Diluted pH: 11.7
Dilution Ratio: up to 1:10
Packaged: 4 L, 20 L & 205 L
Directions for use:
Pretest in an inconspicuous location for color fastness. Diluted product can be applied using a variety of methods such
as a bucket towel system, trigger sprayer, pump up sprayer, power sprayer and wall washing equipment. Agitation
may improve cleaning results on heavy smoke and soot deposits. Do not allow product to dry during the cleaning
process.
For Light Cleaning: Mix 11.4 oz (336 ml) of Smoke Clean with 1 gal (3.78 L) of warm to hot water (1:10 dilution).
For Moderate Cleaning/Restoration: Mix 20.4 oz (605 ml) of Smoke Clean with 1 gal (3.78 L) of warm to hot water
(1:5 dilution).
For Heavy Cleaning/Restoration: Mix 2 quarts (1.9 L) of Smoke Clean with 2 quarts (1.9 L) of warm to hot water to
make 1 gal (3.78 L) of mixed solution. (1:1 dilution).
For Severe Restoration Situations: Use full strength.
Diltuion ratios may vary depending on the degree of soil buildup and water conditions.
Distributed By:
Printed in Canada